GovChime
Notice ID: b584fc0f8acf4edaa4f128571f9b792cAward NoticeAwarded

7490--X-RAY SCANNER

Awarded on September 8, 2023. Full description on SAM.gov.

Awarded tounder 36C10D23P0034 (source: SAM.gov award notice)• $61.9K

Overview

Posted
September 6, 2023
Notice type
Award Notice
Set-aside
Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)
NAICS
561621: Security Systems Services (except Locksmiths)
Agency
Department of Veterans Affairs

Notice details

Place of performance
Department of Veterans Affairs Veterans Benefits Administration Acquisition Division 1800 G Street NW, Washington, DC, 20006
Last updated
Dec 4, 2025
Award date
Sep 8, 2023
Award amount (SAM.gov award notice)
$61.9K

Identifiers

Solicitation number
36C10E23Q0131
Notice ID
b584fc0f8acf4edaa4f128571f9b792c
Award number (PIID)
36C10D23P0034

Description

STATEMENT OF WORK (SOW) DEPARTMENT OF VETERANS AFFAIRS SECURITY X-RAY SCANNER PURCHASE, INSTALLATION AND TRAINING OF SCREENING SYSTEM 5-10-2023 Introduction/Background We are seeking to appoint a sufficiently experienced Contractor to supply and install security scanners and X-ray machines. This work is located at the VA Regional Office, 9500 Bay Pines Blvd, St Petersburg, FL 33744. It is important to ensure that its building is secured in accordance with the Access to Public Premises and Vehicle Act, Federal and local agencies, and the U.S. Food and Drug Administration (FDA). All equipment installation shall be performed during normal working hours (any time from 7:30 AM 5:00 PM) or on the weekends. The work shall be completed within 2 weeks upon receiving the required equipment and materials to complete the installation. A. Scope of Work The contractor shall purchase, install, and program a high performance 750 mm by 550 mm tunnel checkpoint screening system. The contractor shall remove and dispose of existing screening system, purchase, install, and program a high performance 750 mm by 550 mm tunnel checkpoint screening system (RAPISCAN 622XR or the 7555si Single View model. The Contractor shall provide all personnel, material and equipment required in the performance of this contract to include: One (1) fixed X-Ray inspection system (HI-SCAN), equipped with the latest technology including 2 x 24" LCD Monitors- for scanner with dual or single view system. The Tunnel size should be around 750 mm by 550 mm which is required per the first sentence and is a consistent spec in the SOW. Installed on top of X-Ray System Standard HiTraX II Operator Keyboard - Installed on side compartment. Power Cable 5m with Main Supply Cable US Two color monitor which is switchable to Black and White, and the uninterruptible power source/supply Installed on top of X-Ray System Standard HiTraX II Operator Keyboard -- Installed on Keyboard Tray Power Cable 5m with Main Supply Cable US The successful supplier will be required to supply, and install the equipment indicated above. The successful supplier will be required to provide training and support to the users after installation of the system and issue competency certificates after training. The successful supplier should provide a warranty and maintenance plan. The successful supplier shall coordinate delivery and installation with The Regional office at Bay Pines. The contractor shall provide all components, wire, electrical, interfaces, patch cables, hardware, software, labor, programing, and testing needed to ensure proper operation of the security screening system. Also, they shall purchase and install all equipment and components necessary to complete this project within 60 days of award. B. Provided Equipment The Contractor will provide (1) X-Ray baggage scanner with the following salient characteristics:Â for Auto clear. Â Â Fading-in of date/time, luggage counter, user id-number, luggage marking system (acoustic), display of operating mode, REVIEW-feature (to recall previously visible image areas), zoom x64 overview, free programmable keys, USB 2.0 interface, stepless zoom HI-SPOT - automatic dense area detection in real time/HISCAN 7555si Inspection System - Single View/X-ACT - automated procedure for the detection of substances, includes calibration tools/X-PLORE - function for automatic display of Z7, Z8 or Z9 material Tunnel size of 750 mm by 550, material penetration of at least 35mm steel. Exit roller bed to catch items coming through metal detector. Contractor shall install, calibrate, and test equipment to ensure it operates within manufacturers specifications. The Contractor will provide a forklift and forklift operator to safely deliver of the x-ray machine and related equipment to the designated area of install. C. Installation General duties and requirements to be fulfilled by the Contractor are as follows: The Contractor shall provide full-time on-site management, coordination, and technical assistance during installation. Contractor shall provide scanning system, voltage kit, two each 22 LED monitor with 1680x1050 display, keyboard bracket, USB Dongle Windows based keyboard, Pop-out roller bed & backstop, foot mat, freight, installation, and one-year warranty on parts and labor. Software shall include the latest version of automatic target, auto archive, Density Threshold Alert (DTA), Operator Training Program (OTP), and Narcotic scan capability. Multi Energy Imaging (4 Color), View Previous/Next Bag, Manual Image Archive, Configurable Image Processing Key, Baggage Counter, Date/Time Display, Search Indicator, UPS and Flat Panel Monitor. Crystal Clear, Black and White, Organic/Inorganic Stripping, Inverse Video, High Penetration, Pseudo Color, Low Penetration, Variable Edge Enhancement, Variable Color Stripping, Variable Gamma, Variable Density, Dynamic Continuous Zoom and Panning, Fixed Zoom (64X). All items shall be applied and installed in accordance with manufacturer's written instructions. Written hard copies or computer files of manufacturer s installation instructions shall be provided to the COR within 5 days after award prior to commencing installation of any item. D. Training on Equipment Contractor shall provide operational and troubleshooting training for the VA Police Officer s, NSC staff, and Support Service Staff of the Regional Office. Contractor shall provide a minimum of two sessions, one per day to ensure all rotating guards receive training. E. Preventive Maintenance Contractor will provide Preventive Maintenance (PM) which will include: On-site service coverage from Monday through Friday 8:00am to 5:00pm All labor, travel expenses and replacement parts included Response Time: 24 hours from Service Call Unlimited access to 24/7 Technical Support One Annual Preventive Maintenance Inspection. Complete Operational and Calibration Performed. The PM will be a total of five (5) years under this contract. Refer to the Pricing Schedule. F. General Requirements 1. Code Compliance. The Contractor shall comply with all local, state, and federal environmental, health, and safety regulations while conducting this work. In addition, the Contractor shall ensure that all work is in compliance with the applicable codes. 2. Disposal. Unless otherwise specified by the Government, the Contractor will be required to properly remove and dispose of all construction and/or demolition waste material in compliance with all Local, State, and Federal Regulations. 3. Warranty. The Contractor shall provide a written warrant for the minimum of two (2) years on material and one (1) year on workmanship and labor. G. ADDITIONAL INFORMATION: Security and Privacy It is therefore essential that the contractor complete section I of VA Form 0711 for all employees to included sub-contractor s employees who will be working inside the building and provided the completed form to the COR within 5 days of being awarded the contract. Once the COR receives the VA Form 0711 it will take approximately 2 Federal working days before a Non-PIV card can be prepared. The contractor will be notified by the COR when each employee is to report to room 238, PIV Office for photographs and issuance of a Non-PIV badge. The employee must bring TWO (2) forms of identification when they report to room 238. The contractor is responsible for the cost of fingerprinting and background investigations (if required). The contractor should also include the time necessary to process Non-PIV badges in his/her schedule. In addition, a VA Form 20-0334 must be completed by the Contractor, contractor employees, and sub-contractors and original copies turned in to the COR prior beginning construction. The Contractor is required to enter and exit the St Petersburg VARO through the front entrance. Â Entering or exiting the building through any other door will require VARO approval and an escort will be required. Â Upon entering the building, the contractor and/or contractor employees will be required to show proof of identity (must have a valid photo ID) as well as pass through a security screening. Due to the sensitivity and personal information processed at the VARO the Contractor as well as the Contractors employees will be required to complete COR Led Privacy and Information Security Awareness and Rules of Behavior Presentation (VA 832914) training. H. Products Criteria: Standard Products: Material and equipment shall be the standard products of a manufacturer regularly engaged in the manufacture of the products for at least 3 years. Defects: All items furnished shall be free from defects that would adversely affect the performance, maintainability and appearance of individual components and overall assembly. Code and Standards: The products and execution of work shall conform to the referenced codes and standards as required. Local, National and Federal codes shall be enforced. Where codes conflict the most stringent code shall apply. Any conflicts shall be brought to the attention of the Contracting Officers Representative (COR). Manufacturer's Recommendations: Where installation procedures or any part thereof are required to be in accordance with the recommendations of the manufacturer of the material being installed, printed copies of these recommendations shall be furnished to the COR prior to installation. Installation of the item will not be allowed to proceed until the recommendations are received. Failure to furnish these recommendations can be cause for rejection of the material. Execution (Installation, Construction) Quality: Installation: I. Recycling and Trash Removal 1. Unless otherwise approved by the COR as part of the Contractor s recycling plan, the Contractor shall remove all packing material, debris, and cartons from the job site. The Contractor shall dispose of recyclables, trash, and packing materials from the installation site. For example, no recyclables, trash, or packing materials shall be disposed of or discarded in facility-provided recycling or trash containers or dumpsters. 2. Contractor shall provide VBA St. Petersburg SSD validation documentation of proper disposal of equipment ensuring disposal of radiological equipment meets both the state and federal disposal guidelines. J. Safety and Health A. All work shall comply with the applicable requirements of 29CFR 1910/1926 and 40CFR 761. All work shall comply with applicable state and municipal safety and health requirements. Where there is a conflict between applicable regulations, the most stringent will apply. B. The Contractor shall assume full responsibility and liability for compliance with all applicable regulations pertaining to the health and safety of personnel during the execution of work. The Contractor shall hold the Government harmless for any action on its part or that of its employees or subcontractors, which results in illness or death. C. The Contractor shall provide all necessary safety equipment and ensure that such equipment and all relevant safety procedures are adequate for the job being performed and are utilized properly.

Full description on SAM.gov

Award Overview

Award Number

36C10D23P0034

Award Amount (SAM.gov award notice)

$61.9K

Award Date

Sep 8, 2023

Awardee

Awardee UEI

G3KDCDK8JJU8

Original Solicitation

Notice ID: b584fc0f8acf4edaa4f128571f9b792c

Posted Date: Sep 6, 2023

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

1
  • 36C10D25P0132
    OBERA LLC
    Department of Veterans AffairsNAICS 561621
    $6.0KSigned Sep 30, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C10E23Q0131
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. SolicitationJun 26, 2023

    7490--X-RAY SCANNER

    Notice 7b877429e5e44a5988c9dc02611e1f3c on SAM.gov

  2. Pre-SolicitationJun 26, 2023

    7490--X-RAY SCANNER

    Notice ade4971ca52545dbbe598a8b86ff25ec on SAM.gov

  3. 4×
    SolicitationJul 7, 2023

    7490--X-RAY SCANNER

    Notice 2bd52c959739420aac80feaf82871bf3 on SAM.gov

  4. AwardedCurrentSep 6, 2023

    7490--X-RAY SCANNER

    Notice b584fc0f8acf4edaa4f128571f9b792c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Department of Veterans Affairs is seeking a vendor to provide Physical Access Control preventative maintenance to the existing Lenel system. Please review the attached documents to see a copy of the Draft Statement of Work as well as what we are asking for in response to this notice. Thank you
-Market Research09/18/2026
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with format in FAR Part 12; simplified acquisition procedures apply. VA will conduct the procurement according to FAR Part 12, Acquisitions of Commercial Products and Commercial Products and Commercial Services as supplemented with additional information included in this notice. The solicitation number is 36C25627Q0041 and is issued as a Request for Quotation (RFQ). The proposed contract action will initiate a new service agreement/contract to provide, Fire Alarm and Fire Suppression monitoring, detection, testing, maintenance and repair services for the newly constructed Southeast Louisiana Veterans Health Care System (SLVHCS) medical campus in New Orleans, LA. This solicitation is 100% SET-ASIDE FOR SERVICE-DISABLED VETERAN OWNED SMALL BUSINESS. The NAICS code is 561621 Security Systems Services (except Locksmiths). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 (03/13/2026). Only emailed requests received directly from the requester will be accepted. RESPONSES ARE DUE, November 13th, 2026, by 3:00 p.m. Central Time (CST). Quotes are due electronically to Marcus.Sidney@va.gov no later than the response date listed on FBO. Only electronic quotes will be considered. Point of contact for this solicitation is Marcus Sidney at Marcus.Sidney@va.gov. All Inquires must be submitted electronically.
-Combined Synopsis11/13/2026
-AwardedOpen
The purpose of this amendment is to provide site visit on November 9, 2026, at 11:00am EST.
-Pre-Solicitation11/13/2026
See attached solicitation 36C25727Q0050 for additional information.
-Solicitation11/23/2026

Additional Details

Solicitation Number

36C10E23Q0131

Archive Date

Sep 16, 2023

Office Address

WASHINGTON, DC, 20006