GovChime
Notice ID: 498ef812b31e4ea9847f7e423aefcc00Special Notice

San Juan VAMC Construction Management Services

Responses closed . Full description on SAM.gov.

Overview

Response deadline
1:00 PM EST
Posted
October 26, 2026
Notice type
Special Notice
Set-aside
Service-Disabled Veteran-Owned Small Business (SDVOSB) Sole Source (FAR 19.14)
NAICS
541330: Engineering Services
Agency
Department of Veterans Affairs

Notice details

Place of performance
San Juan, Puerto Rico, 00921
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
36C10F27R0010
Notice ID
498ef812b31e4ea9847f7e423aefcc00

Description

NOTICE OF INTENT TO SOLE SOURCE:

The Office of Facilities Acquisition, Eastern Region, intends to negotiate on a sole-source basis with AES Group, LLC, a Service-Disabled Veteran Owned Small Business (SDVOSB), to provide Construction Management Services for the DB renovation of the OR and Third Floor Corridor project at the San Juan VA Medical Center located in San Juan, Puerto Rico.  

The North American Industry Classification System (NAICS) code for this requirement is 541330 with a small business size Standard of $25.5 million.

The authority for restricting competition on this requirement is 38 U.S.C. 8127(c), known as the Veterans First Contracting Program, which provides the authority to directly contract with an SDVOSB or a VOSB.  The decision to make a sole-source award is a business decision wholly within the discretion of the Government.

This Notice of Intent is not a request for quotes or proposals. No contract award will be made based on quotations or proposals received in response to this notice. No solicitation document exists, and no telephone or email inquiries will be accepted. 

Any responsible source who believes it is capable of meeting the requirement may submit a capability statement to Jessica.Williams17@va.gov no later than November 9, 2026 at 1:00 PM (EST).

A determination not to compete the requirement based upon the responses to this notice is solely within the discretion of the Government.

Disclaimer and Important Notes: No proprietary, classified, confidential, or sensitive information should be included in responses to this notice.  This notice does not obligate the Government to award a contract.  The Government will not pay for information provided in response to this notice. The Government reserves the right to use information provided by respondents for market research purposes.  The Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Oct 23, 2026

NAICS

541330

Agency

Department of Veterans Affairs

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 1
    Version 1Special NoticeCurrent

    San Juan VAMC Construction Management Services

    Notice 498ef812b31e4ea9847f7e423aefcc00 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
US ARMY CORPS OF ENGINEERS (USACE) — LATIN AMERICA AND CARIBBEAN DISTRICT INDUSTRY DAY ANNOUNCEMENT: DAY 1 — ARCHITECTURE & ENGINEERING (A/E) SERVICES Requirement: Callao Naval Base, Peru, Infrastructure Modernization - AE Customer Agency: Peruvian Navy Notice ID: W51DQV27Z1CV8 NAICS Code: 541330 – Engineering Services Event Date: Wednesday, December 1, 2026 Location: Centro Naval Sede San Borja, Lima, Peru RSVP Deadline: November 18, 2026, at 3:00 pm CT General Overview The U.S. Army Corps of Engineers (USACE), Latin America & Caribbean District, is hosting an Industry Day event in Lima, Peru, to engage with industry partners regarding the upcoming acquisition of the Callao Naval Base, Peru, Infrastructure Modernization Project and NAMRU-S O&M Project. To provide focused engagement for distinct industry sectors, the event is structured over three specialized days: Day 1 (Tuesday, December 1, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Architecture & Engineering (A/E) Services (NAICS 541330) Day 2 (Wednesday, December 2, 2026): Callao Naval Base, Peru, Infrastructure Modernization Project - Construction (NAICS 236220) Day 3 (Thursday, December 3, 2026): U.S. Navy Medical Research Unit South (NAMRU-S) Lima and Iquitos, Peru - Facilities Operation and Maintenance (O&M) Services (NAICS 561210) This announcement specifically covers Day 1 (A/E Services). Separate announcements address Day 2 (Construction) and Day 3 Facilities Operation and Maintenance (O&M). Purpose of the Event The purpose is to present the planned Architectural and Engineering (A/E) requirements in support of shoreside and port facility modernization at Callao Naval Base, brief prospective prime design firms and specialized consultants on USACE engineering criteria and U.S. Federal contracting standards, provide walk-in technical guidance on federal vendor registrations, and conduct private one-on-one market research capability briefings. Summary of the Sessions The program includes three distinct sessions: A/E Design: A comprehensive briefing detailing project scope, facility design packages, site conditions, host-nation and DoD design standards, BIM requirements, procurement timelines, and USACE compliance guidelines. One-on-One Capability Briefings: Private, scheduled 15-minute briefings reserved for prospective A/E firms to present specialized technical and managerial capabilities directly to the USACE acquisition panel. Federal Systems Registration Support: Individual, walk-in technical assistance to help prospective firms navigate SAM.gov, Unique Entity Identifier (UEI), and NCAGE. Please note: This announcement is issued solely for market research and informational planning purposes. It does not constitute a Request for Proposals (RFP), an Invitation for Bids (IFB), or an obligation on the part of the U.S. Government. No contract award will result directly from this event. Logistics & Schedule Date: December 1, 2026 Hours: 08:30 – 4:00 PM CT/Local Lima Time Location: Centro Naval Sede San Borja Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Peru Daily Schedule Note: A detailed schedule of presentations, networking intervals, and allocated session times is currently being finalized. The specific daily agenda will be published in a forthcoming update to this announcement prior to the event. Event Details & Specific Sessions Session 1: A/E Seminar & Design Scope Briefing USACE engineering, project management, and contracting representatives will deliver a detailed technical presentation covering: Master planning, site layout, and architectural vision for the Callao Naval Base modernization. Design criteria, geotechnical and seismic considerations, coastal environment durability standards, and Unified Facilities Criteria (UFC). Building Information Modeling (BIM), specialized mechanical/electrical/plumbing (MEP), fire protection, environmental permitting, and host-nation building codes. Overview of the federal A/E Brooks Act selection process (FAR Part 36.6), evaluation criteria, submission requirements (Standard Form 330), and milestone schedules. Session 2: One-on-One Capability Briefings (Pre-Registration Required) Prospective A/E firms (including formal Joint Ventures and Prime Mentor-Protégé partnerships) may request a dedicated 15-minute private session with the USACE technical and acquisition panel. Objective: Market research to assess industry interest, multi-disciplinary engineering depth, regional design experience, BIM/CADD capabilities, and past performance. Availability: Time slots are limited and will be confirmed on a strictly first-come, first-served basis upon receipt and validation of the RSVP form. Session 3: Federal Systems Registration Support Throughout the day, USACE specialists will host an individual support station to assist contractors with: Firms interested in receiving support should bring a computer Navigating NATO Commercial and Government Entity (NCAGE) code applications. Obtaining a Unique Entity Identifier (UEI) and activating an account in SAM.gov. Project & Requirement Overview Project Description The contemplated acquisition covers comprehensive multi-disciplinary Architecture and Engineering (A/E) services. The scope of work encompasses: Topographic, hydrographic, and geotechnical site investigations and soil stabilization analysis. Comprehensive seismic engineering compliant with Peruvian seismic zones and DoD structural criteria. Concept development, 35% preliminary design, 65% intermediate design, and final 100% ready-to-advertise design packages and technical specifications. Multi-discipline engineering including civil, structural, architectural, MEP, specialized fire suppression, industrial ventilation, cold-chain refrigeration, and telecommunications. Environmental assessments, stormwater management planning, and host-nation regulatory compliance support. Complete Furniture, Fixtures, & Equipment (FF&E) interior design packages. Development of construction cost estimates (MII format) and construction phasing schedules. Summary of Facility Packages: Building 110 Primary Function: Spare Parts Warehouse Key Technical Considerations: Heavy-duty slab design, industrial racking integration, material handling flow, automated logistics staging. Building 115 Primary Function: Clothing & Gear Warehouse Key Technical Considerations: High-density pallet storage, humidity and climate control, inventory distribution bays. Building 112 Primary Function: Material Warehouse Key Technical Considerations: Bulk staging, overhead crane/hoist accommodations, heavy equipment ingress/egress ramps. Building 113 Primary Function: Customs Warehouse Key Technical Considerations: Secure bonded holding areas, host-nation customs inspection layout, physical security infrastructure. Building 114 Primary Function: Petroleum, Oil, and Lubricants (POL) Warehouse Key Technical Considerations: Secondary containment, explosion-proof electrical systems, specialized foam/water fire suppression, environmental drainage controls. Building 111 Primary Function: Medicine & Medical Supplies Warehouse Key Technical Considerations: Temperature/humidity-controlled storage (cold chain capability), pharmaceutical-grade clean finishings, backup power integration. Building 120 Primary Function: DIRNOTEMAT & Quality Control Building Key Technical Considerations: Administrative offices, testing and quality inspection laboratories, specialized testing benches, IT/telecom infrastructure. Site & Ancillary Works Primary Function: Infrastructure & Integration Key Technical Considerations: Site grading, structural fill, perimeter security, access roads, utility connections, complete FF&E packages, and host-nation compliant permitting. Streamlined RSVP & Venue Access Instructions Due to facility capacity constraints and military installation security protocols at Centro Naval, advance registration is mandatory. Attendance is limited to a maximum of three (3) representatives per company. To simplify the registration process, interested firms must follow this two-step procedure: Step 1 — Email Request: Send an email to Claudia Montero at Claudia.M.Montero@usace.army.mil, and cc Renee Booth, Meranda.R.Booth@usace.army.mil, and Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil , no later than November 18, 2026, at 3:00 pm CT. Subject Line: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Company Name] Message Body: State your company name, point of contact, contact email address, and interest in attending Day 1 (A/E Services). Step 2 — Registration Form & Official Confirmation: Upon receipt of your email, Ms. Montero will reply with the official RSVP & Security Access Form. Complete the form (which collects attendee details, security credentials, and interest in 1-on-1 sessions or SAM.gov support) and return it via email. Upon review and clearance, Ms. Montero will issue an Official RSVP Confirmation Notice containing venue access instructions, check-in requirements, and confirmed one-on-one time slots (if requested). Event Documentation & Post-Event Postings To promote dynamic in-person dialogue and networking among prospective prime and subcontracting partners, detailed session slide decks, complete meeting agendas, and formal Q&A transcripts will not be published prior to the event. Pre-Event Distribution: Only logistical directions, security guidelines, and RSVP updates will be released prior to December 2, 2026. Post-Event Distribution: Following the conclusion of the event, the official presentation deck, the attendee directory (to facilitate joint ventures and teaming arrangements), and all formal Government answers to submitted questions will be posted publicly to SAM.gov under this Notice ID. Submission of Questions Pre-Event Questions: Email the POCs listed below. During the Event: Attendees may submit oral questions during designated Q&A periods or provide written questions on index cards distributed during registration. Post-Event Questions: Following the event, participants may submit technical and procurement inquiries via email to the points of contact listed below. All responses will be consolidated and posted publicly to SAM.gov. Federal Systems Registration (SAM.gov & PIEE) Prospective A/E firms are strongly encouraged to initiate federal vendor registrations immediately. Any resulting solicitation will incorporate FAR 52.204-7 (System for Award Management), mandating an active SAM registration at the time of proposal submission and contract award. Registration is free. Domestic (U.S.) Firms: Obtain a Unique Entity Identifier (UEI) and ensure an active record in SAM.gov. A CAGE code is assigned during registration. International / Peruvian Firms: Obtain a NATO Commercial and Government Entity (NCAGE) code: Non-NATO entities (including Peru) must register via the NATO Support and Procurement Agency (NSPA) portal: NSPA NCAGE Portal. Entities in NATO member or sponsored nations: Consult the NATO AC/135 Directory. Request a UEI through SAM.gov, ensuring company legal name and address match the NCAGE record exactly. Finalize registration on SAM.gov. Points of Contact (POCs) Claudia Montero - Administrative Management Assistant, USACE Latin America and Caribbean District Email: Claudia.M.Montero@usace.army.mil Renee Booth - Contracting Officer, USACE Latin America and Caribbean District Email: Meranda.R.Booth@usace.army.mil Jaclyn Yocum – Contracting Specialist, USACE Latin America and Caribbean District Email: Jaclyn.C.Yocum@usace.army.mil *********************************************************************************** CUERPO DE INGENIEROS DEL EJÉRCITO DE LOS EE. UU. (USACE) - DISTRITO DE AMÉRICA LATINA Y EL CARIBE NUNCIO DE DÍA DE LA INDUSTRIA - DÍA 1 — SERVICIOS DE ARQUITECTURA E INGENIERÍA (A/E) Requerimiento: Modernización de la Infraestructura de la Base Naval del Callao, Perú Agencia Cliente: Marina de Guerra del Perú ID de Aviso: W51DQV27Z1CV8 Código de NAICS: 541330 – Engineering Services Fecha del Evento: 1 de diciembre de 2026 Lugar: Centro Naval Sede San Borja, Lima, Peru Fecha limite para RSVP: 18 de noviembre de 2026, 3:00 pm hora Lima Descripción General El Cuerpo de Ingenieros del Ejército de los Estados Unidos (USACE), Distrito del Caribe, está organizando un evento del Día de la Industria en Lima, Perú, para interactuar con socios de la industria respecto a la próxima adquisición del Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú, y el Proyecto de Operación y Mantenimiento (O&M) de NAMRU-S. Con el fin de proporcionar un enfoque específico para los distintos sectores de la industria, el evento se estructura en tres días especializados: Día 1 (Martes 1 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Servicios de Arquitectura e Ingeniería (A/E) (NAICS 541330) Día 2 (Miércoles 2 de diciembre de 2026): Proyecto de Modernización de la Infraestructura de la Base Naval del Callao, Perú — Construcción (NAICS 236220) Día 3 (Jueves 3 de diciembre de 2026): Unidad de Investigación Médica de la Marina de los EE. UU. Sur (NAMRU-S) Lima e Iquitos, Perú — Servicios de Operación y Mantenimiento (O&M) de Instalaciones (NAICS 561210) Este anuncio cubre específicamente el Día 1 (Servicios de A/E). Existen anuncios separados para el Día 2 (Construcción) y el Día 3 (Operación y Mantenimiento de Instalaciones). Propósito del Evento El propósito es presentar los requerimientos planificados de Arquitectura e Ingeniería (A/E) en apoyo a la modernización de las instalaciones portuarias y terrestres en la Base Naval del Callao, informar a las posibles firmas de diseño principales y consultores especializados sobre los criterios de ingeniería de USACE y los estándares de contratación federal de los EE. UU., brindar orientación técnica directa para el registro de proveedores federales, y llevar a cabo sesiones individuales privadas de presentación de capacidades para investigación de mercado. Resumen de las Sesiones El programa incluye tres sesiones distintas: Diseño de A/E: Una sesión informativa detallada sobre el alcance del proyecto, paquetes de diseño de instalaciones, condiciones del sitio, estándares de diseño de la nación anfitriona y del Departamento de Defensa (DoD), requerimientos BIM, cronogramas de adquisición y pautas de cumplimiento de USACE. Sesiones Individuales de Capacidades (One-on-One): Reuniones privadas y programadas de 15 minutos reservadas para que las firmas de A/E interesadas presenten directamente sus capacidades técnicas y de gestión especializadas ante el panel de adquisiciones de USACE. Soporte para el Registro en Sistemas Federales: Asistencia técnica individual presencial para ayudar a las firmas interesadas a navegar en SAM.gov, Identificador Único de Entidad (UEI) y NCAGE. Nota: Este anuncio se emite únicamente con fines de investigación de mercado y planificación informativa. No constituye una Solicitud de Propuestas (RFP), una Invitación a Licitación (IFB), ni una obligación por parte del Gobierno de los EE. UU. No se adjudicará ningún contrato directamente como resultado de este evento. Logística e Itinerario Fecha del Evento: miércoles 1 de diciembre de 2026 Hora: 08:30 – 4:00 PM CT/ Hora Lima Ubicación: Centro Naval Sede San Borja, Av. San Luis S/Nº Cdra. 24, Urb. San Borja Sur, Lima, Perú Nota sobre el Itinerario Diario: Actualmente se está finalizando un cronograma detallado de las presentaciones, intervalos de networking y tiempos asignados para las sesiones. La agenda diaria específica se publicará en una actualización próxima a este anuncio antes del evento. Detalles del Evento y Sesiones Específicas Sesión 1: Seminario de A/E e Informativa del Alcance del Diseño Representantes de ingeniería, gestión de proyectos y contratación de USACE ofrecerán una presentación técnica detallada que cubrirá: Planificación maestra, distribución del sitio y visión arquitectónica para la modernización de la Base Naval del Callao. Criterios de diseño, consideraciones geotécnicas y sísmicas, estándares de durabilidad en entornos costeros y Criterios Unificados de Instalaciones (UFC). Modelado de Información de Construcción (BIM), sistemas especializados de mecánica/electricidad/plomería (MEP), protección contra incendios, permisos ambientales y códigos de construcción de la nación anfitriona. Descripción general del proceso federal de selección de A/E bajo la Ley Brooks (FAR Parte 36.6), criterios de evaluación, requisitos de presentación (Formulario Estándar 330) y cronogramas de hitos. Sesión 2: Sesiones Individuales de Capacidades (Se requiere registro previo) Las firmas de A/E interesadas (incluidas las asociaciones en participación (Joint Ventures) formales y alianzas Mentor-Protégé) pueden solicitar una sesión privada dedicada de 15 minutos con el panel técnico y de adquisiciones de USACE. Objetivo: Investigación de mercado para evaluar el interés de la industria, la capacidad de ingeniería multidisciplinaria, la experiencia de diseño regional, las capacidades en BIM/CADD y el historial de desempeño. Disponibilidad: Los cupos son limitados y se confirmarán en estricto orden de llegada tras la recepción y validación del formulario RSVP. Sesión 3: Soporte para el Registro en Sistemas Federales Durante el día, especialistas de USACE dispondrán de una estación de soporte individual para ayudar a los contratistas con: Navegación y solicitud del código de Entidad Comercial y Gubernamental de la OTAN (NCAGE). Obtención del Identificador Único de Entidad (UEI) y activación de la cuenta en SAM.gov. Importante: Las firmas interesadas en recibir soporte deben traer una computadora portátil. Descripción General del Proyecto y Requerimientos Descripción del Proyecto La adquisición contemplada cubre servicios integrales multidisciplinarios de Arquitectura e Ingeniería (A/E). El alcance del trabajo incluye: Investigaciones topográficas, hidrográficas y geotécnicas del sitio, y análisis de estabilización de suelos. Ingeniería sísmica integral que cumpla con las zonas sísmicas peruanas y los criterios estructurales del DoD. Desarrollo de conceptos, diseño preliminar al 35%, diseño intermedio al 65%, y paquetes de diseño final al 100% listos para licitación con especificaciones técnicas. Ingeniería multidisciplinaria que incluye civil, estructural, arquitectónica, MEP, supresión de incendios especializada, ventilación industrial, refrigeración de cadena de frío y telecomunicaciones. Evaluaciones ambientales, planificación del manejo de aguas pluviales y apoyo para el cumplimiento regulatorio con la nación anfitriona. Paquetes completos de diseño de interiores para Mobiliario, Accesorios y Equipamiento (FF&E). Desarrollo de estimaciones de costos de construcción (formato MII) y cronogramas de fases de construcción. Resumen de Paquetes de Instalaciones A continuación, se detallan los edificios e infraestructura contemplados en el alcance del diseño: Edificio 110 - Almacén de repuestos Diseño de losas de alta resistencia, integración de estanterías industriales, flujo de manejo de materiales, área de preparación logística automatizada. Edificio 115 - Almacén de Ropa y Equipamiento Almacenamiento de palets de alta densidad, control de humedad y climatización, bahías de distribución de inventario. Edificio 112 - Almacén de Materiales Almacenamiento a granel, adecuación para grúas pórtico/polipastos superiores, rampas de ingreso/egreso para equipos pesados. Edificio 113 - Almacén de aduana Áreas de retención aduanera seguras, diseño para inspección de aduanas locales, infraestructura de seguridad física. Edificio 114 - Almacén de Petróleo, Aceites y Lubricantes — POL Contención secundaria, sistemas eléctricos a prueba de explosiones, sistemas especializados de supresión de incendios por espuma/agua, controles de drenaje ambiental. Edificio 111 - Almacén de Medicinas y Suministros Médicos Almacenamiento con control de temperatura y humedad (capacidad de cadena de frío), acabados limpios de grado farmacéutico, integración de energía de respaldo. Edificio 120 - Edificio de DIRNOTEMAT y Control de Calidad Oficinas administrativas, laboratorios de prueba e inspección de calidad, bancos de prueba especializados, infraestructura de TI y telecomunicaciones. Obras del Sitio y Auxiliares - Infraestructura e integración Nivelación del terreno, relleno estructural, seguridad perimetral, vías de acceso, conexiones de servicios públicos, paquetes completos de FF&E y tramitación de permisos de acuerdo con la normativa de la nación anfitriona. Instrucciones para RSVP y Acceso al Lugar del Evento Debido a las limitaciones de capacidad de las instalaciones y a los protocolos de seguridad militar en el Centro Naval, el registro previo es obligatorio. La asistencia está limitada a un máximo de tres (3) representantes por empresa. Para simplificar el proceso de registro, las firmas interesadas deben seguir este procedimiento de dos pasos: Paso 1 — Solicitud por Correo Electrónico: Envíe un correo electrónico a Claudia Montero, Claudia.M.Montero@usace.army.mil), con copia a Renee Booth Meranda.R.Booth@usace.army.mil, y Jaclyn Yocum, Jaclyn.C.Yocum@usace.army.mil, a más tardar el 18 de noviembre de 2026 a las 3:00 pm CT. Línea de Asunto: RSVP Request: Callao Naval Base AE Industry Day (Dec 1, 2026) – [Nombre de la Empresa] Cuerpo del Mensaje: Indique el nombre de su empresa, punto de contacto, correo electrónico de contacto y su interés en asistir al Día 1 (Servicios de A/E). Paso 2 — Formulario de Registro y Confirmación Oficial Al recibir su correo, la Sra. Montero responderá con el Formulario Oficial de RSVP y Acceso de Seguridad. Complete el formulario (que recopila detalles de los asistentes, credenciales de seguridad e interés en sesiones 1 a 1 o soporte para SAM.gov) y devuélvalo por correo electrónico. Tras la revisión y aprobación, la Sra. Montero emitirá un Aviso de Confirmación de RSVP Oficial que contendrá las instrucciones de acceso al lugar, los requisitos de registro de entrada y los horarios de las sesiones individuales (si fueron solicitadas). Documentación del Evento y Publicaciones Posteriores Para promover un diálogo presencial dinámico y el networking entre los posibles socios principales y subcontratistas, no se publicarán las presentaciones detalladas de las sesiones, las agendas completas ni las transcripciones oficiales de preguntas y respuestas antes del evento. Distribución Previa al Evento: Solo se publicarán las indicaciones logísticas, las pautas de seguridad y las actualizaciones de RSVP antes del 2 de diciembre de 2026. Distribución Posterior al Evento: Tras la conclusión del evento, la presentación oficial, el directorio de asistentes (para facilitar consorcios y acuerdos de equipo) y todas las respuestas gubernamentales formales a las preguntas presentadas se publicarán en SAM.gov bajo este ID de Anuncio. Envío de Preguntas Preguntas Previas al Evento: Envíe un correo electrónico a los puntos de contacto (POC) enumerados abajo. Durante el Evento: Los asistentes podrán formular preguntas verbales durante los periodos designados para preguntas y respuestas o entregar preguntas por escrito en tarjetas que se distribuirán durante el registro. Preguntas Posteriores al Evento: Después del evento, los participantes podrán enviar consultas técnicas y de adquisiciones por correo electrónico a los puntos de contacto indicados. Todas las respuestas se consolidarán y se publicarán en SAM.gov. Registro en Sistemas Federales (SAM.gov y PIEE) Se recomienda a las firmas de A/E interesadas que inicien de inmediato sus registros como proveedores federales. Cualquier solicitud resultante incorporará la cláusula FAR 52.204-7 (System for Award Management), que exige un registro activo en SAM al momento de presentar la propuesta y de la adjudicación del contrato. El registro es gratuito. Firmas Locales (EE. UU.): Obtener un Identificador Único de Entidad (UEI) y asegurar un registro activo en SAM.gov. El código CAGE se asigna automáticamente durante el registro. Firmas Internacionales / Peruanas: Obtener un código de Entidad Comercial y Gubernamental de la OTAN (NCAGE): Las entidades no pertenecientes a la OTAN (incluyendo al Perú) deben registrarse a través del portal de la Agencia de Apoyo y Adquisiciones de la OTAN (NSPA): Portal NSPA NCAGE. Entidades en naciones miembros o patrocinadas por la OTAN: Consultar el Directorio AC/135 de la OTAN. Solicitar un UEI a través de SAM.gov, asegurando que el nombre legal y la dirección de la empresa coincidan exactamente con el registro NCAGE. Finalizar el registro en SAM.gov. Puntos de Contacto (POCs) Para cualquier consulta relacionada con este evento, por favor comuníquese con los siguientes representantes: Claudia Montero - Asistente de Gestión Administrativa, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Claudia.M.Montero@usace.army.mil Renee Booth - Oficial de Contrataciones, Distrito de América Latina y el Caribe de USACE, Correo Electrónico: Meranda.R.Booth@usace.army.mil Jaclyn Yocum - Especialista en Contrataciones, Distrito de América Latina y el Caribe de USACE Correo Electrónico: Jaclyn.C.Yocum@usace.army.mil
-Special Notice11/18/2026
Modification 2 to Presolicitation Notice 36C25527R0013 This modification provides answers to RFIs received and revised the evaluation criteria to be used for this project. RFIs Received for Project # 657A5-24-108, Replace Medium Voltage Feeder 3 and Transformers 1. Factor 4 Past Performance / Section F Project Eligibility  The solicitation states that projects submitted for past performance consideration must have completed both design and construction, and that projects not constructed will not be considered. Would the VA consider accepting relevant electrical infrastructure studies or assessments in Section F, particularly those involving medium-voltage distribution systems and feeder evaluations, that demonstrate directly applicable technical expertise but did not result in construction? We prefer to keep it as projects that were designed AND constructed. Since this is a construction project and not a study, we want projects that have been finished to be used for past performance criteria.  2. Factor 2 Specialized Experience and Technical Competence / Laboratory Requirements  Factor 2 references the firm's technical capabilities in design quality management procedures, CADD/BIM, equipment resources, and laboratory requirements. Given that the project scope primarily involves medium-voltage electrical feeder and transformer replacements, could the VA clarify the applicability of laboratory requirements to this project? We respectfully request that this criterion be removed from the evaluation requirements, as it does not appear directly relevant to the stated scope of work. Laboratory requirements were deleted. Please see revised evaluation criteria below.  3. Request for Submission Deadline Extension Given the technical scope of the project and the level of detail required to address the evaluation criteria, we respectfully request a one-week extension of the SF330 submission deadline, from November 10, 2026, to November 17, 2026. This additional time would allow interested firms to prepare comprehensive qualifications packages that fully address the solicitation requirements. SF330 submission due date extended from 11/10/2026 to 11/172026. End of RFIs.
-Pre-Solicitation11/17/2026
SPECIAL NOTICE FOR QUALIFICATIONS (SF 330) NAICS Code: 541330 Engineering Services (Small Business size standard $25.5M) A. INTRODUCTION: The VA Central Western Massachusetts Healthcare System (CWM HCS) plans to build and install a new elevator tower at Building 25 on the Leeds Campus. This project will correct a FCA deficiency. Provide all professional architectural and engineering (A/E) Part One Services (also known as Design Phase Type A & Type B Services) necessary to develop complete drawings, specifications, and cost estimates associated with building a new elevator tower at Building 25 and Part Two Services (also known as Construction Period Services Type C). The intent of this project includes but is not limited to: Evaluate existing elevator pit slab for buildings 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, and 26 and design an elevator pit sump pump with oil interceptor. Design plumbing of oil water separator to sanitary sewer. See acceptable conceptual design attached. This conceptual design shall be validated. This shall be used to minimize and inform design efforts. Identify and address any issues or conflicts as necessary. If the elevator tower appearance is different than the conceptual design, conduct a Section 106 Historical Submission Report for VA to file with Massachusetts State Historical Preservation Office, by a Professional Historic Preservation Consultant. Existing report will be made available to the highest rated A/E firm. Conduct code compliance reviews (NFPA, ABAAS, VA Design Manuals, etc.) and integrate findings into design for compliance. Where conflicts exist between VA adopted codes and standards and the documents on the TIL, the A/E shall bring this to the attention of the VA. The resolution of the conflict shall be made by the authority having jurisdiction for VA to ensure consistency department wide. The A/E shall provide all services required to prepare documents and reports consistent with the VA s project team goals as prioritized during preliminary project meetings, field surveys and studies. The A/E shall determine existing conditions, severity of deficiencies, if any previous deficiencies have been corrected and to identify any conditions which may have previously been unreported. Cost estimates shall be prepared to reflect the cost of replacing the component in a standalone project (i.e., not as part of another project) and all costs including but not limited to asbestos removal if required, special field conditions and/or temporary equipment needed during the construction. Provide a Qualified Elevator Inspector during Construction Services to certify elevator. Also provide Part Two A/E Services (also known as Construction Period Services Type C) A/E Part Two Services of this design project (also known as Construction Period Services) includes responding to construction contractor Requests For Information (RFIs) during the solicitation (solicitation support) and construction phases of the construction project, attendance at post-award and commissioning kick off construction project conferences, review of construction material submittals and shop drawings, attendance at weekly teleconference construction meetings, approximately 1 site visits per month during active construction (both scheduled and emergent) to ensure compliance with the design drawings and specifications, preparation of site visit reports, coordination with project commissioning requirements/QEI inspection, review of any construction project modifications for cost and technical acceptability, attendance and participation during the pre-final inspection and final acceptance inspection, preparation of the punch list and preparation of record drawings of the completed construction project based on the construction contractor s as-built drawings. The A/E shall prepare a submittal log to be utilized by the VA during construction period services and maintain a RFI log. B. CONTRACT INFORMATION: The VA Medical Center Central Western Massachusetts located in Leeds, MA has a requirement for a Firm Fixed Price contract to provide professional A/E services for the 631-21-011 Building 25 Elevator Design project. The magnitude of construction is between $2,000,000 and $5,000,000. Prospective firms are reminded they must certify that in accordance with VAAR 852.219-75, VA Notice of Limitations on Subcontracting-Certificate of Compliance for Services and Construction (JAN 2023) (DEVIATION), in the case of a contract for services (except construction), the contractor will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219- 74. Any work that a similarly situated certified SDVOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Other direct costs may be excluded to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service as set forth in 13 CFR 125.6. SF330 packages shall address how each firm anticipates meeting this criteria. This requirement is in accordance with the Selection of Architects and Engineers as implemented in Subpart 36.202 of the RFO and Subpart M836.102 of the VA Procurement Manual. All submissions will be evaluated in accordance with the evaluation criteria. A "short list" of the three most highly rated after initial source selection will be chosen for negotiations of a contract award. The Government will not pay, nor reimburse, any costs associated with responding to this request. The Government is under no obligation to award a contract as a result of this announcement. Respondents are put on notice that firm(s) selected by the Selection Authority will be required to submit a Fixed Price Proposal on the VA Form 6298 to include labor, overhead, profit, and other costs for this project for negotiation by the Contracting Officer prior to contract award. The negotiated agreement will be incorporated into the resulting contract. C. THIS IS NOT A REQUEST FOR PROPOSAL: This is a request for SF 330s only. Any requests for a solicitation will not receive a response. No material will be issued, and no solicitation package or bidder/plan holder list will be issued. D. PROJECT INFORMATION: Provide all professional architectural and engineering (A/E) services necessary to develop complete drawings, specifications, cost estimates, construction schedules, project phasing, investigations, site visits and construction period services associated with the 631-21-011 Building 25 Elevator Design at the VAMC Central Western Massachusetts HCS, Leeds, MA 01053. E. EVALUATION SELECTION CRITERIA: Each respondent s SF 330 submittal package will be evaluated in accordance with RFO 36.202 procedures. The selection criteria, in descending order of importance will be as follows: 1. Specialized Experience/Technical Competence 2. Professional Qualifications 3. Past Performance F. SELECTION CRITERIA DESCRIPTIONS: The selection criteria descriptions (1 through 3) are provided below in descending order of importance. Specialized Experience/Technical Competence Provide five (5) recent and relevant projects related to the Statement of Work with a similar magnitude (magnitude of construction for the design is between $2,000,000 and $5,000,000) that demonstrates experience with VA Design Requirements or equivalent with significant existing condition renovation. A minimum of three (3) projects should be for comprehensive designs of new elevator builds. Projects should detail the design manual requirements and required equipment for effective operation of an elevator, HVAC, and other necessary mechanical systems. Projects should also detail working with end users and reviewing manufacturer equipment. A minimum of two (2) projects should be for comprehensive designs for exterior historical renovations that took place in the Commonwealth of Massachusetts. These projects should detail the applicable regulation governing historical reviews, explain the process, and demonstrate an understanding of and adherence to the requirements. Recency is defined as performance occurring within five (5) years of the date of this notice. If current projects are provided, these projects must have begun one (1) year prior to the issuance of this notice. Projects that have not been in performance for one (1) year will not be considered. Relevancy is defined as performance of work on projects that are similar in scope to the type of project anticipated under the resultant contract. This factor evaluates the amount of experience and technical competence the firm has in designing similar types of projects. Respondents must provide five (5) recent and relevant projects; any project provided in addition to the five are not required and will not be considered if provided. The following information is required for all projects provided under this criteria any material missing the following requested information will be assessed a deficiency: Contract/Task Order Number Project Title Location Prime Firm with % of self-performed work Subconsultants Start and Completion dates If project is not yet complete, identify the current phase/stage of the project. Fully completed projects will carry more weight than projects still in design Cost of Construction Description of the project in sufficient detail and clearly document how it is relevant to the scope of this project Professional Qualifications Professional qualifications necessary for satisfactory performance of required services. The A/E firm will be evaluated according to their ability to demonstrate the following: education; training; registration; overall and relevant experience; and longevity with the firm of key management and technical personnel. Firms shall provide brief resumes of proposed team members who will specifically serve as the project managers and designers of record, as well as of other relevant team members or subcontractor team members who will perform technical tasks under this contract. Subcontractor team member resumes shall indicate their record of working together with the prime contractor. The minimum required disciplines are Architecture, Structural, Mechanical (HVAC and Plumbing), Electrical, Fire Protection, Interior Design, Elevator Consultant, Cost Estimator. The Designers of Record shall perform and direct the design within their respective discipline and shall sign and seal the drawings. All Designers of Record must be professionally registered in their discipline, and this must be shown on their resume. Each resume shall include a minimum of three (3) specific completed projects that best illustrate the individual team members experience in their technical field relevant to this project scope; any project provided in addition to the three (3) will not be evaluated as part of this criteria. Past Performance Firms will be evaluated for past performance on recent and relevant contracts with Government agencies (emphasis on VA work) and private industry in terms of cost control, professional performance, general management, cooperativeness, quality of work, compliance with performance schedule, and a record of significant claims against the firm due to improper or incomplete A/E services (references required). The evaluation may consider Past Performance information regarding predecessor companies, key personnel who have relevant experience, or subcontractors that will perform major or critical aspects of the requirement when such information is relevant to this acquisition. Past Performance information on contracts not listed by the offeror may also be evaluated. The Government may contact references and contact parties other than those identified by the offeror, and information received may be used in the evaluation of the offeror s Past Performance. While the Government may elect to consider data obtained from other sources, the burden of providing current, accurate, and complete Past Performance information rests with the offeror. The Government reserves the rights to obtain and evaluate Past Performance information from any source it deems appropriate. Respondents with no previous past performance shall state so when addressing the selection criteria. Documentation supplied should detail firms ability to work with government entities and design standards or similar relevant experience with other entities. The following information is required for evaluation of past performance: The A/E firm shall submit past performance evaluations (from CPARS if experience was on a Government contract) for projects provided under Evaluation Criteria 1, Specialized Experience/Technical Competence. In addition to the past performance evaluations the firm shall provide owner points of contact for each project listed to include name, title, telephone number, e-mail, contract number, project name, project description, and start and completion dates. Recency is defined as performance occurring within five (5) years of the date of this notice. If current projects are provided, these projects must have begun one (1) year prior to the issuance of this notice. Projects that have not been in performance for one (1) year will not be considered. Relevancy is defined as performance of work on projects that are similar in scope to the type of project anticipated under the resultant contract. If there is no CPARS data available, Past Performance Questionnaires (PPQs) will be accepted. Please utilize the attached PPQ document. PPQs shall be submitted to the CO not later than the closing date for receipt of the SF 330s. Email PPQs to Brian.Kelly@va.gov. The subject line shall state 36C24126Q0518 Past Performance for (Name of Company) Project 631-21-011 . NOTE: A/E Firms must not review the Past Performance Questionnaire prior to submission. They must be submitted by the client/evaluator directly to the CO. Firms should follow up and encourage references to get the questionnaires to the CO in a timely manner. Do not include copies of the letters or questionnaires in the SF 330 package. Note: We recommend you contact every reference listed and let them know we may contact them for information. Their timely replies would be appreciated. G. QUESTIONS AND COMMENTS: a. Questions and comments regarding this notice must be submitted by email only to the Contracting Officer, Brian Kelly at Brian.Kelly@va.gov. b. Oral questions will not be answered. c. The deadline for questions is November 20, 2026, at 1:00PM EST. H. SF 330 SUBMITTAL PACKAGE PAGE INSTRUCTIONS: a. SF 330 submittal packages, including Past Performance Questionnaires, shall be submitted no later than 4:00PM EST on December 7, 2026. Respondents are responsible for ensuring SF330 submittal packages, any revisions, and modifications are submitted by this time. b. Qualified A/E firms are required to submit ONE (1) electronic copy via email to Brian Kelly at Brian.Kelly@va.gov. If the file is too large to send via email, the offeror may send multiple emails with multiple files (See Self-Service Microsoft Exchange: Email Sending Limits (va.gov) regarding file size). SF 330 forms are available at: https://www.gsa.gov/forms#SF c. Submission of information incorporated by reference is not allowed. d. Prospective firms shall address all selection criteria factors within their submitted SF 330 package. e. Submissions are limited to 65 pages. i. Absolutely no photographs shall be submitted. ii. Title pages and tables of contents, if applicable, are excluded from the page count limitation. iii. Pages submitted in excess of the limitations specified in this Notice will not be evaluated by NCO 1. f. Telephone or fax inquiries will not be accepted. I. SF 330 PACKAGE CONTENTS: a. The SF 330 submittal packages shall consist of a completed SF 330, specific information addressing each of the seven selection criteria described in this Notice. b. Respondents are required to meet all requirements in addition to those identified as selection criteria. c. SF 330 submittal packages not consistent with the requirements and selection criteria of this notice may be determined unacceptable and removed from consideration. d. Any SF 330 submittal package, modification, or revision, that is received after the exact time specified for receipt is late and will not be considered unless the contracting officer determines that accepting the late submittal would not unduly delay the acquisition; and there is acceptable evidence to establish that it was received at NCO 1 installation designated for receipt of submittal packages and was under NCO 1 s control prior to the time set for receipt of submittal packages; or it was the only submittal package received. J. SF 330 PACKAGE PREPARATION: a. Qualified A/E firms are required to submit ONE (1) electronic copy via email to Brian Kelly at Brian.kelly@va.gov. SF 330 forms are available online at: https://www.gsa.gov/forms#SF. b. Electronic copy shall be in searchable PDF format of the SF 330. c. A cover sheet should be included, clearly marked with the Respondent's name, complete address with 9-digit zip code, phone number, e-mail address, UEI number, date of response, title and notice identification. d. A table of contents shall be provided for ready reference to sections and figures. e. SF 330 submittal packages shall be consistent with the following structure and formatted accordingly: SF 330 PART I CONTRACT SPECIFIC QUALIFICATIONS 1. Sections A through D 2. Section E 3. Section F 4. Section G 5. Section H 6. Section I 7. Other additional information and attachments SF 330 PART II GENERAL QUALIFICATIONS (Note: Respondents shall clearly label additional information and attachments). K. FAR and VAAR: The FAR, VAAR, and VAAM citations referenced in this Special Notice can be accessed via the following links: FAR https://www.acquisition.gov/ VAAR https://www.va.gov/oal/library/vaar/index.asp VAAM https://www.va.gov/oal/library/vaam/
-Special Notice12/07/2026
-AwardedOpen
NAICS is 541330 - Engineering Services and small business size standard of $25.5. ___________________________________________________________________________________________________ The purpose of this announcement is for market research only. No solicitation will be posted at this time. The Department of Veterans Affairs NCO 15 Contracting Office and John Cochran (JC) VA Medical Center, 915 N Grand Blvd, St. Louis MO. 63106, seeks capabilities information on interested vendors to provide AE Services for design completion for project. The responding interested offerors are requested to provide procurement capabilities from licensed professional architects and engineers currently registered in the state of Missouri or in a state of which Missouri has recognized the engineering license. The specific disciplines which will be evaluated are Architects, Civil Engineer, Mechanical Engineers, Electrical Engineers, Structural Engineers, Industrial Hygienists, Estimators, CAD operators, Project Managers, LEED Consultant, Fire Protection Engineer, and Interior Designer at the medical center. The North American Industry Classification system (NAICS) code for this acquisition is 541330 - Engineering Services and small business size standard of $25.5. PSC: C1DA Magnitude of Construction Project between $500,000 and $1,000,000. Project Intent: A/E Firm shall provide all necessary design and construction period of services for subject project. The VA St. Louis Health Care System, John Cochran Division, will prepare existing space for a new Interventional Radiology equipment in Room A261. This project will renovate the area of the current equipment and reconfigure the area to properly utilize all of the features of the new unit. Work includes demolition of walls, ceilings, flooring and utilities. Existing exam, control and equipment room will be reconfigured to support new equipment needs. New construction includes walls, ceilings, flooring, doors, lead shielding, lights, power, data, phone, systems, new AHU system to support HVAC design guidelines, to allow the vendor to install the new equipment. Project will require assessment of existing lead shielding. Scope to focus on refreshing space instead of a full reconstruction. Responses must be received by 6:00 PM CST on November 05, 2025, via e-mail to the Contracting Officer at Gislaine.Dorvil@va.gov. PLEASE REFERENCE "SOURCES SOUGHT: Project 657-27-207JC Prepare Site for Interventional Radiology Equipment Room A261" IN THE SUBJECT LINE. Respondents will not be contacted regarding their submission or information gathered because of this Sources Sought notice. Interested firms shall be required to respond to additional announcements separately from this announcement without further notice from the Government when posted to the Contract Opportunities website at https://sam.gov/. The Contract Opportunities website is the only official site to obtain these documents.
-Market Research11/05/2026

Additional Details

Solicitation Number

36C10F27R0010

Archive Date

Nov 24, 2026