Notice ID: 86bc292f90f94ff083f6d0cbdd991e68Award NoticeAwarded
6515--PHS West Sterilization Carts
Awarded on September 11, 2024. Full description on SAM.gov.
Awarded tounder 36C24224P1811 (source: SAM.gov award notice)• $34.7K
Overview
- Posted
- September 11, 2024
- Notice type
- Award Notice
- Set-aside
- Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)
- NAICS
- 339113: Surgical Appliance and Supplies Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Last updated
- Sep 9, 2025
- Award date
- Sep 11, 2024
- Award amount (SAM.gov award notice)
- $34.7K
Identifiers
- Solicitation number
- 36C24224Q0914
- Notice ID
- 86bc292f90f94ff083f6d0cbdd991e68
- Award number (PIID)
- 36C24224P1811
Description
Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2024-03. This solicitation is set-aside for SDVOSB. The associated North American Industrial Classification System (NAICS) code for this procurement is 339113, with a small business size standard of 800 employees. The FSC/PSC is 6515. The Albany VA Medical Center requires new custom built PHS West Sterilization carts: PHS Short (x8) and Tall (x3). Description and specifications are listed below. The purchase order/contract period of performance is: 60 Days ARA Place of Performance/Place of Delivery Address: Albany VA Medical Center 113 Holland Ave. Albany, NY Postal Code: 12208 Country: UNITED STATES The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services. If paragraph (j) of the provision is applicable, a written submission is required. The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Products and Commercial Services FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Products and Commercial Services Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of FAR 13. Comparative evaluation is the side by side pairwise comparison of quotes based on factors resulting in a Contracting Officer decision for the quote most favorable to the Government. The following are the decision factors: See ADDENDUM to 52.212-2 EVALUATION COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES. The award will be made to the response most advantageous to the Government. Responses should contain your best terms, conditions. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoters shall list exception(s) and rationale for the exception(s), if any. Submission of your response shall be received not later than 4:00 PM, September 5, 2024 sam.demuzio@va.gov. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact Sam DeMuzio, Contracting Officer. Email: sam.demuzio@va.gov STATEMENT OF WORK Objective: New custom built PHS West Sterilization carts: PHS Short (x8) and Tall (x3) for the Albany VA Medical Center located at 113 Holland Avenue, Albany, NY 12208. This is a Brand Name Only procurement for PHS West carts due to Compatibility with Existing Equipment - Clean-A-Scope trays and rigid Aesculap containers. Cart Specifications: Short Cart: Designed to Hold 5 Clean A Scope Totes & accommodate Aesculap Rigid Container as supplied by customer Bi-Folding Locking Door Stainless Steel 3-Point Latch with Key Small cart Overall Size: 24"W X 29"L X 41"H Tall Cart: Designed to Hold 7 Clean A Scope Totes & accommodate Aesculap Rigid Container as supplied by customer Bi-Folding Locking Door Stainless Steel 3-Point Latch with Key Large Cart overall size: 24"W X 29"L X 59"H ALL CARTS: Two Push Handles on Both Ends of Cart Perimeter Bumper 1" Tubular Frame Rubber Stops for Totes Glides for 5 Tote Boxes (Totes not included) or 7 Tote Boxes 6" Swivel Casters 6" TPR Wheels Cart Washer Upgrade fiberglass handle recess 5X7 Inventory Sign Holder - Shipped Loose Tray Loading and Door to be on 29" Side Instead of 24" Seamless Top Slides for both trays and rigid containers to minimize wear/metal on metal. ADDENDUM to 52.212-2 EVALUATION COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Basis for Award. The Government will issue a purchase order to the responsible quoter whose quotation conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotations: Technical Quality Price Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in FAR 13.106-2 (b) (3), where quotations will be compared to one another to determine which provides the best benefit to the Government. The Government reserves the right to consider a quotation other than the lowest price that provides additional benefit(s). Quotations may exceed minimum requirements of the solicitation. The Government reserves the right to select a quotation that provides benefit to the Government that exceeds the minimum requirements of the solicitation but is not required to do so. Each response must meet the minimum requirements of the solicitation. The Government is not requesting or accepting alternate quotations. The evaluation will consider the following: Technical or Quality: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Price: The Government will evaluate the price of all line-item prices. CONTRACT CLAUSES: C.1 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2023) C.2 VAAR 852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR CERTIFIED SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESSES (JAN 2023) (DEVIATION) C.3 VAAR 852.219-76 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (JAN 2023) (DEVIATION) C.4 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2018) C.5 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020) C.6 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018) C.7 VAAR 852.247-73 PACKING FOR DOMESTIC SHIPMENT (OCT 2018) C.8 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) C.9 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024) SOLICITATION PROVISIONS: E.1 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (SEP 2023) E.2 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021) E.3 52.204-29 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS REPRESENTATION AND DISCLOSURES (DEC 2023) E.4 52.216-1 TYPE OF CONTRACT (APR 1984) E.5 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) E.6 52.212-2 EVALUATION COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021) E.7 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)
Award Overview
Award Number
36C24224P1811
Award Amount (SAM.gov award notice)
$34.7K
Award Date
Sep 11, 2024
Awardee
Awardee UEI
EENPPQ4L4SD5
Original Solicitation
Notice ID: 86bc292f90f94ff083f6d0cbdd991e68
Posted Date: Sep 11, 2024
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
36C24224Q0914- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisAug 27, 2024
6515--PHS West Sterilization Carts
- AwardedCurrentSep 11, 2024
6515--PHS West Sterilization Carts
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format Revolutionary FAR Overhaul (RFO) in Federal Acquisition Regulation (FAR) subpart 12.202, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular, FAC Number 2026-01, effective date 03/13/2026. This solicitation is set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The associated North American Industrial Classification System (NAICS) code for this procurement is 339113, with a small business size standard of 800 employees. The FSC/PSC is 6515. Objective: The Department of Veterans Affairs (VA), VISN 02 Network Contracting Office, is seeking sources that can provide FIVE (5) Smart Hospital Stretchers that at a minimum meets the following salient characteristics: Smart, versatile hospital stretchers designed for fall prevention, patient comfort, in-stretcher procedures, and clinician support across emergency, perioperative, and transport settings. Chair Position, 19" Low Height 1-Touch Siderail Release Zero Transfer Gap OB/Pelvic Position Solution Integrated O2 Solution, 32" Wide Surface Phone & Urinal Holders Head-Of-Bed Angle Display 700 lb. Safe Working Load 3/4" Standard IV Pole Sockets 6 Transport Strap Locations Full Trend and Reverse Trend 4-Corner Brake and Steer 2 Foldable Transport Handles 8" Tente Carpet Casters Pneumatic Head & Knee Section Standard Two-Year Warranty Included Options: Accumax Surface 32x76x5 Intellidrive Electric Hi-Lo Height Integrated Scale Power Plug: NEMA5-15P (US) USB Port Enhanced 3-Mode Bed Exit Electric Patient Controls Coiled Power Cord SafeView®+ w/ IllumiGuide Permanent IV Pole Horizontal O2 Tank Holder English Language Labels SafeView+ Visual Indicators: At-a-glance status lights displaying bed-exit status, battery level, and lowest position. Three-Mode Bed-Exit System: Features silence, auto-reset (auto-rearm), or verbal prompts, with optional integration to Voalte Nurse Call and EMR systems. Low Deck Height: Drops down to a 19-inch low height to help mitigate patient falls and ease entry/exit. Articulations & Handling: Electric or manual high/low adjustment, head/foot articulation, Trendelenburg/reverse Trendelenburg controls, and low-effort steering. Contractor will provide technical support, equipment maintenance, and device repair for smart stretchers. Warranty shall be for a three (3) year period covering on-site repairs & preventive maintenance by certified technician. The Contractor shall delivery the items within thirty (30) days after award. Place of Delivery: Items to be delivered to the Castle Point VA Medical Center: Castle Point VA Medical Center 41 Castle Point Road Wappingers Falls, NY 12590-7004 The purchase order/contract period of performance is to be delivered within 45 days after award. The full text of FAR provisions or clauses may be accessed electronically at http://www.va.gov/oal/library/vaar/index.asp (VAAR) https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52#FAR_52_252_2 (FAR OVERHAUL) The following solicitation provisions and clause apply to this acquisition: 52.203-17 Contractor Employee Whistleblower Rights. (NOV 2023) 52.204-7 System for Award Management Registration, with Alternate I (OCT 2018) (DEVIATION NOV 2025) 52.204-13 System for Award Management-Maintenance (OCT 2018) (DEVIATION NOV 2025) 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate (NOV 2023) (DEVIATION 2025) with Alternate II (JAN 2025) 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (MAR 2026) (DEVIATION NOV 2025) 52.222-36 Equal Opportunity for Workers with Disabilities. (JUN 2020) (DEVIATION NOV 2025) 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (DEC 2010) (DEVIATION NOV 2025) 852.219-73 VA Notice to Total Set-Aside for Certified Service-Disabled Veteran-Owned Small Businesses (JAN 2023) (DEVIATION) 852.219-76 VA Notice of Limitations on Subcontracting Certificate of Compliance for Supplies and Products. 852.232-72 Electronic Submission of Payment Requests (NOV 2018). 852.239-76 Information and Technology Accessibility (FEB 2023). FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services (SEP 2023) (DEVIATION AUG 2025). (a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include (1) The solicitation number; (2) The name, address, telephone number of the Offeror; (3) The Offeror s Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator; (4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation; (5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and (6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments. (b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (c) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation. (2) Any offer, modification, or revision received after the time specified for receipt of offers is late and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted. (3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (4) Offerors may withdraw their offers by written notice to the Government received at any time before award. (d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror s initial offer should contain the Offeror s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received. (e) Debriefings. If a post award debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable: (1) The agency s evaluation of the significant weak or deficient factors in the debriefed Offeror s offer. (2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror. (3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award. (5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror. (6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities. (End of provision) FAR 52.222-90 Addressing DEI Discrimination by Federal Contractors. As prescribed in 22.2203, insert the following clause: Addressing DEI Discrimination by Federal Contractors (Deviation DATE) (a) Definitions. As used in this clause Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor. Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources. (b) In connection with the performance of work under this contract, the Contractor agrees as follows: (1) The Contractor will not engage in any racially discriminatory DEI activities; (2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause; (3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts; (4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and (5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause. (6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4). (c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States. (End of clause) *The Government will not consider offers for award from offerors that do not provide the Buy American certification with their bid, quotation, or proposal, and all such responses will be deemed ineligible for evaluation and award. Certificate must be filled out, signed, and submitted with proposal. *The Government will not consider offers for award from offerors that do not provide the Limitations of Subcontracting document with their bid, quotation, or proposal, and all such responses will be deemed ineligible for evaluation and award. Document must be filled out, signed, and submitted with proposal. 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Certificate. As prescribed in 25.1101 (b)(2)(i), insert the following provision: Buy American-Free Trade Agreements-Israeli Trade Act Certificate (NOV 2023) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) or (c)(1) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(2) of this provision contains a critical component. (2) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (b) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin [List as necessary] (c) (1) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . Other Foreign End Products: Line Item No. Country of Origin Exceeds 55% domestic content (Y/N) [List as necessary] (2) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) Alternate I [Reserved] Alternate II (Jan 2025). As prescribed in 25.1101 (b)(2)(ii), substitute the following paragraph (b) for paragraph (b) of the basic provision: (b) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled Buy American Free Trade Agreements Israeli Trade Act . Israeli End Products: Line Item No. [List as necessary] Alternate III (Jan 2025). As prescribed in 25.1101 (b)(2)(iii), substitute the following paragraph (b) for paragraph (b) of the basic provision: (b) The Offeror certifies that the following supplies are Korean end products or Israeli end products as defined in the clause of this solicitation entitled Buy American Free Trade Agreements Israeli Trade Act . Korean End Products or Israeli End Products: Line Item No. Country of Origin [List as necessary] (End of provision) VAAR 852.219-76 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (JAN 2023) (DEVIATION) As prescribed in 819.7011(c), insert the following clause. The contracting officer shall tailor the clause in paragraph (a)(2)(iii) as appropriate: (a)Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Offeror check the appropriate box] (i) [ ] In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), it will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (ii) [ ] In the case of a contract for supplies from a nonmanufacturer, it will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) is granted. The offeror understands that, as provided in 13 CFR 121.406(b)(7), such a waiver has no effect on requirements external to the Small Business Act, such as the Buy American Act or the Trade Agreements Act. (2) Manufacturer or nonmanufacturer representation and certification. [Offeror fill-in check each applicable box below. The offeror must select the applicable provision below, identifying itself as either a manufacturer or nonmanufacturer]: (i) [ ] Manufacturer or producer. The offeror certifies that it is the manufacturer or producer of the end item being procured, and the end item is manufactured or produced in the United States, in accordance with paragraph (a)(1)(i). (ii) [ ] Nonmanufacturer. The offeror certifies that it qualifies as a nonmanufacturer in accordance with the requirements of 13 CFR 121.406(b) and paragraph (a)(1)(ii).The offeror further certifies it meets each element below as required in order to qualify as a nonmanufacturer. [Offeror fill-in check each box below.] [ ] The offeror certifies that it does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS code 541519, which is found at 13 CFR 121.201, footnote 18). [ ] The offeror certifies that it is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied. [ ] The offeror certifies that it will take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice. (iii) [ ] The offeror certifies that it will supply the end item of a small business manufacturer, processor, or producer made in the United States, unless a waiver as provided in 13 CFR 121.406(b)(5) has been issued by SBA. [ ] If this is a multiple item acquisition, the offeror certifies that at least 50% of the estimated contract value is composed of items that are manufactured by small business concerns. (3) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (4) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee; (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating 18 U.S.C. 1001. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract or to determine whether the offeror qualifies as a manufacturer or nonmanufacturer in compliance with the limitations on subcontracting requirement. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c)The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror s bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification: I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee:________________________________________ Printed Title of Signee:_________________________________________ Signature:___________________________________________________ Date:_______________________________________________________ Company Name and Address:___________________________________ (End of clause) All quoters shall submit the following: One (1) quote in PDF format One (1) Filled out and signed Limitations on Subcontracting in PDF format One (1) Filled out and signed Buy America Certificate in PDF format. All quotes shall be sent to the Contracting Officer at: Jonatan.Rondon@va.gov Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of RFO FAR 12. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services (NOV 2021) (DEVIATION OCT 2025). (a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered: A comparative evaluation based on price and other factors will be conducted, evaluation factors other than price when combined are significantly more important than price. The Government reserves the right to consider a quotation other than lowest price. The Government reserves the right to select quotations that provides benefits to the Government that exceeds the minimum requirements of the solicitation but is not required to do so. The following factors will be used to evaluate offers: Technical capability of the item offered to meet the Government requirement: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Period of Performance with Delivery: Quotations will be evaluated to the extent they can reasonably meet the Government's needs with respect to full project completion from date of award. Price: The Government will evaluate the price by adding the total of all line-item prices, including all options. The Total Evaluated Price will be that sum. (b) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) Submission of your response shall be received not later than November 10th, 2026, at 1600 EST at Jonatan.Rondon@va.gov. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact: Jonatan Rondon Contracting Officer Network Contracting Office (NCO2) Margaret Cochran Corbin VA Campus 423 East 23rd Street, 14045-W New York, NY 10010 212-686-7500 ex. 16490 Jonatan.rondon@va.gov | - | Combined Synopsis | 11/10/2026 |
| - | Awarded | Open | |
| - | Pre-Solicitation | 11/16/2026 | |
HOME O2 VA STOCK EQUIPMENT | - | Pre-Solicitation | 10/06/2026 |
Page 2 of 2 Please see below for answers to questions received regarding solicitation 36C26226Q1325. All other terms and conditions remain unchanged. Clarification of the correct proposal/solicitation response due date Responses are due Friday, September 11, 2026. Clarification and reconciliation of the Period of Performance and initial delivery schedule The period of performance will be for one year Due to the complexity and customization of this product, custom surgical packs shall take no more than 24 weeks to produce, sterilize, and deliver for the initial order after commencement of the forthcoming contract. Confirmation of whether any option periods are identified for this requirement There are no option periods for this requirement. Review and reconsideration of the standard delivery timeline, consistent with industry standard of 2 3 days Pack deliveries shall be made two business days after receipt of an order if placed before 1:00 p.m. PST, and within three (3) calendar days for orders placed after 1:00 p.mAre the two and three days the amount of days they have to ship the items, or the items have to be delivered? The comment was correct that requirement as almost impossible for non-local vendors to meet. They must get adequate processing time for each order. GLA will have to be responsible and take process and shipping times into consideration when placing orders. Keeping it this way greatly reduces competition. . Orders shall be delivered no more than three (3) business days. Consideration of a purchasing commitment of at least 60 days in connection with the three-month inventory requirement The contractor must maintain at least three (3) months completely assembled custom packs onpacks on hand at all times, The government will make no purchasing commitments above the minimum dollar threshold identified in the requirements contract. Clarification or reconsideration of the monthly-in-arrears invoicing structure Per government regulations payment is due 30 days after the latter of receiving a proper invoice or government acceptance of the items. Billing monthly ensures a streamlined and consistent process for managing payments .payments. Inclusion of FAR 52.225-1, Buy American Supplies, consistent with the stated Buy American Act evaluation factor See pages 3-6 for inclusion of FAR 52.225-1, Buy American Supplies and FAR 52.225-2, Buy American Certificate. Additionally, Factor 2 of the Evaluation Factors on page 41 of the RFQ now reads: ii. Factor 2 The Offeror shall identify the percentage of items within the proposed custom surgical and non surgical packs that are manufactured in the United States. The Offeror shall also identify the percentage of items manufactured in each foreign country, clearly listing the countries of origin and the proportion of total components sourced from each location. The Offeror must ensure the percentages provided are accurate and reflect the total composition of each pack. In addition, the Offeror shall complete and submit the Buy American Certificate and Made in America Certificate PPE included in this solicitation. Removal or clarification of the Non-Manufacturer Rule Compliance evaluation factor in light of the standing waiver Per VA regulation, a certification is still required for SDVOSB/VOSB set asides. Evaluation factor #3 will remain in the solicitation unchanged. Clarification on Make PPE in America Act applicability to sterile surgical gowns A waiver for all non-domestic items relevant to this acquisition is under review. Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (Oct 2022). As prescribed in 25.1101 (a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): The cost of its components mined, produced, or manufactured in the United States exceeds 65%  percent of the cost of all its components. (End of clause) 52.225-2 Buy American Certificate As prescribed in 25.1101(a)(2), insert the following provision: Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b)Foreign End Products: Line Item No. Country of Origin Exceeds 65% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) 852.225-70 MADE IN AMERICA-PPE ([MAY 2026]) (DEVIATION) (a) Definitions. As used in this clause Component, as applied to an item described in subsection (b) of this clause, means an article, material, or supply incorporated directly into PPE. Domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE, including the materials and components thereof, that is grown, reprocessed, reused, or produced in the United States. Foreign-made domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE that is assembled outside the United States containing only materials and components that are grown, reprocessed, reused, or produced in the United States. Foreign PPE means PPE other than domestic PPE or foreign-made domestic PPE. PPE, as applied to an item described in subsection (b) of this clause, means surgical masks, respirator masks and powered air purifying respirators and required filters, face shields and protective eyewear, gloves, disposable and reusable surgical and isolation gowns, head and foot coverings, and other gear or clothing used to protect an individual from the transmission of disease. United States, as applied to an item described in subsection (b) of this clause, means the 50 States, the District of Columbia, and the possessions of the United States. (b) The Contractor must deliver only domestic PPE, unless it specified delivery of foreign-made domestic or foreign PPE in the provision of the solicitation entitled Made in America Certificate PPE". (c) The Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (End of clause) 852.225-71 MADE IN AMERICA CERTIFICATE PPE (MAY 2026) (DEVIATION) (a)(1) The Offeror certifies that each item of PPE is either domestic, foreign made domestic, or foreign. (2) The terms domestic PPE, foreign-made domestic PPE, foreign PPE, and PPE, are defined in the clause of this solicitation entitled Made in America PPE . (3) The Offeror understands that the Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (b) The Offeror must list all offered PPE in the table and indicate the category of PPE (domestic, foreign-made domestic, or foreign). Line Item No. Country of Origin Domestic PPE, Foreign-made PPE, Foreign PPE ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (c) In the event the Department of Veterans Affairs determines both domestic personal protective equipment and foreign-made domestic personal protective equipment are not available due to nonavailability or unreasonable cost, the Contractor shall comply with the clauses at Federal Acquisition Regulation (FAR) 52.225-1 Buy American Supplies or 52.225-3 Buy American Free Trade Agreements Israeli Trade Act and the provisions at FAR 52.225-2 Buy American Certificate or 52.225-4 Buy American Free Trade Agreements Israeli Trade Act Certificate or the clause at FAR 52.225-5 Trade Agreements and the provision at FAR 52.225-6 Trade Agreements Certificate, as identified in the solicitation. (End of provision)] | - | Combined Synopsis | 09/11/2026 |
Additional Details
Solicitation Number
36C24224Q0914
Archive Date
Oct 11, 2024
Office Address
ALBANY, NY, 12208