GovChime
Notice ID: c62951bd46184d4b8a119e0c1dd713c5Award NoticeAwardedArchived

J065--12/15/2025-12/14/2026 B 4 | 688C60118 | PAR Excellence Support & Service | SOLE SOURCE ONE BASE YEAR PLUS FOUR OPTION YEARS | WASHINGTON DC VAMC

Awarded on December 12, 2025. Full description on SAM.gov.

Awarded tounder 36C24526P0130 (source: SAM.gov award notice)• $57.8K

Overview

Posted
December 12, 2025
Notice type
Award Notice

Notice details

Office
245-NETWORK CONTRACT OFFICE 5 (36C245)
Place of performance
Department of Veterans Affairs VAMC, Baltimore, MD, 21201
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov
Award date
Dec 12, 2025
Award amount (SAM.gov award notice)
$57.8K

Identifiers

Solicitation number
36C24526Q0108
Notice ID
c62951bd46184d4b8a119e0c1dd713c5
Award number (PIID)
36C24526P0130

Description

INTENT TO SOLE SOURCE THIS IS AN INTENT TO SOLE SOURCE ANNOUNCEMENT AND IT IS FOR INFORMATION & PLANNING PURPOSES ONLY; THE FEDERAL GOVERNMENT WILL NOT BE AWARDING TO A THIRD-PARTY ENTITY THAT ACTS AS A PASS-THRU TO THE OEM. IT IS NEITHER A SOLICITATION ANNOUNCEMENT, NOR A REQUEST FOR INFORMATION, PROPOSALS OR QUOTES AND DOES NOT OBLIGATE THE GOVERNMENT TO AWARD A CONTRACT. IF A VENDOR RESPONDS TO THIS INTENT TO SOLE SOURCE, THE VENDOR WILL NOT RECEIVE A RESPONSE. THE PURPOSE OF THIS INTENT TO SOLE SOURCE ANNOUNCEMENT IS FOR MARKET RESEARCH, IN ORDER TO MAKE APPROPRIATE ACQUISITION DECISIONS, AND TO GAIN KNOWLEDGE OF POTENTIALLY QUALIFIED SERVICE-DISABLED VETERAN OWNED SMALL BUSINESSES, VETERAN OWNED SMALL BUSINESSES, 8(A), HUBZONE AND OTHER SMALL BUSINESSES WHO STATE THEY ARE CAPABLE OF PERFORMING THE WORK. **A sole source contract award will result from this Notice.** IN THE EVENT THAT A VENDOR DISAGREES WITH THIS SOLE SOURCE, THEN DOCUMENTATION OF TECHNICAL EXPERTISE MUST BE PRESENTED IN SUFFICIENT DETAIL FOR THE GOVERNMENT TO DETERMINE THAT YOUR COMPANY POSSESSES THE NECESSARY FUNCTIONAL AREA EXPERTISE AND EXPERIENCE TO COMPETE FOR THIS ACQUISITION. **VENDOR RESPONSE SHALL INCLUDE THE BELOW** Responses to this INTENT TO SOLE SOURCE shall include company name, address, point of contact, phone number, point of contact e-mail, DUNS Number, Cage Code, size of business pursuant to North American Industrial Classification System (NAICS) 811210, (size standard of $34M, per SBA Table of Small Business Size Standards January 1, 2022) AND whether your company has special socio-economic status (i.e., SDVOSB, VOSB, Small Business, HUBZone, etc.). (A) COMPANY NAME (B) ADDRESS (C) POINT OF CONTACT (D) PHONE, FAX, AND EMAIL (E) DUNS NUMBER (F) CAGE CODE (G)TAX ID NUMBER (H) TYPE OF SMALL BUSINESS, E.G. SERVICES DISABLED VETERAN OWNED SMALL SMALL BUSINESS, SMALL DISADVANTAGED BUSINESS, OR SMALL BUSINESS HUBZONE BUSINESS, (I) WILL YOUR COMPANY BE PERFORMING THE WORK? OR DO YOU PLAN ON SUB-CONTRACTING OUT THE WORK? (I) Is your company considered small under the NAICS code identified under this RFI? (Size standard of = or < $30M, per SBA Table of Small Business Size Standards August 19, 2019) (J) Does your company have an FSS contract with GSA or the VA NAC or a GWAC contract holder with any other federal agency? If so, please provide the contract number. (K) If your company holds a FSS GSA/VA NAC contract with other federal GWAC contract holders, are the services requested available on your schedule/contract? (L) General pricing of your products is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. AND (J) ***WILL YOUR COMPANY BE DOING ALL OF THE WORK? IF NOT, WILL YOUR COMPANY BE SUB-CONTRACTING OUT THE WORK?***MUST ANSWER*** MUST PROVIDE A CAPABILITY STATEMENT THAT ADDRESSES THE ORGANIZATIONS QUALIFICATIONS AND ABILITY TO PERFORM AS A CONTRACTOR FOR THE WORK DESCRIBED BELOW. IF THE VENDOR IS AN SDVOSB/VOSB, BE PREPARED TO DEMONSTRATE HOW IT WILL NOT SUB-CONTRACT THE WORK BY MORE THAN 51%, PER VAAR 852.219-75, VAAR 819.7011(b) Contract clauses. (DEVIATION) ***IF THERE ARE ANY OBJECTIONS TO THIS SOLE SOURCE, CONTACT THE CONTRACTING OFFICER AT AMY.WALTER1@VA.GOV .***BUSINESS, VETERAN-OWNED SMALL BUSINESS, 8(A), HUBZONE, WOMEN OWNED STATEMENT OF WORK (SOW) Washington DC VAM PAR Excellence Support & Service Contract GENERAL INFORMATION Title of Project: Washington DC VAMC Par Excellence Support Contract Scope of Work: The contractor must provide all the resources necessary to accomplish the deliverables described in this statement of work (SOW). Diagnose problems and determine whether such a problem is related to software or hardware covered by this Statement of Work. If such a problem is determined to be caused by software or hardware covered under this Statement of Work, PAR Excellence will correct the problem. If the problem is Software related, the contractor must attempt to correct the problem via phone. If necessary, the contractor must make all required changes to the Software and related Deliverables. Help desk services are available and accessible by telephone or e-mail. The help desk will assist Government in resolving a problem and obtaining general technical assistance, including queries on how to use the Products and requests for additional Documentation. The contractor Support Staff are available 7AM - 8PM EST. After Hours Support is available via an on-call Technician at all other times. To contact the on- call technician, Government must call via telephone. The Contractor On-Call Support Staff will respond to after-hour support request in a timely manner, generally within 30 minutes to one hour after the initial phone call. The contractor may periodically release changes to the software ("Software Releases"), including support, updates or upgrades. These changes will be reviewed and approved through the VA OIT Technical Reference Model System. Once approved, updates will be scheduled via OIT and COTS. The contractor solutions are monitored by PAR Excellence PTPS (Pro-Active Technical Product Support) PTPS automatically checks in with the contractor 4 times a day to verify system health PTPS may periodically send messages to the contractor to provide alerts to Support Staff Alerts from PTPS may require the contractor support staff to contact a VA employee for assistance to resolve the alert. This may require escalation from the local staff to local OIT, or National COTS. Background: In October 2023 the DC VA Medical Center procured a contract via SAC, 36C10X24P0094 for a weight-based inventory management system. The vendor chosen was Par Excellence (previously known as Greenbrier) who partnered with a Service-Disabled Veteran Owned Small Business (SDVOSB) SDV Office Systems, LLC. The installation and management of the equipment for supply chain inventory is a success. Subsequently a support contract is now needed for the equipment that is now in place. Since the inception of the contract the manufacturer of the equipment has registered with SAM.gov and the Financial Management System and will no longer be working with SDV Office Systems, LLC. Performance Period: The Washington DC VA Medical Center intends to establish a base plus 4 option years for PAR Excellence support services. Federal Holidays a) New Year's Day January 1 b) Martin Luther King's Birthday 3rd Monday in January c) President's Day 3rd Monday in February d) Memorial Day Last Monday in May e) Juneteenth Jun 19th f) Independence Day July 4th g) Labor Day 1st Monday in September h) Columbus Day 2nd Monday in October i) Veteran's Day November 11 j) Thanksgiving Day Last Thursday in November k) Christmas Day December 25 Any other day designated by the President as a national holiday. When one of the holidays falls on a Sunday, the following Monday will be observed as a legal holiday. When holiday falls on a Saturday, the preceding Friday is observed as a legal holiday by US Government agencies. Place of Performance: Washington DC VA Medical Center: 50 Irving Street, Northwest Washington, DC 20422 Charlotte Hall VA Clinic: 29640 Three Notch Road Charlotte Hall, MD 20622 Fort Belvoir VA Clinic: 9300 Dewitt Loop Fort Belvoir, VA 22060 Lexington Park VA Clinic: 45870 East Run Drive East Run Center, Suite 300 Lexington Park, MD 20653 Montgomery County VA Clinic: 15810 Gaither Drive Shady Grove Development Park Suite 130 Gaithersburg, MD 20877 Southern Prince George s Country VA Clinic: 5801 Allentown Road, Suites 104 and 106 Camp Springs, MD 20746 CONTRACT AWARD MEETING No scheduled kickoff meeting is required because base system installation is complete and support is available on day 1 contract. GENERAL REQUIREMENTS All written deliverables must be phrased in layperson language. Statistical and other technical terminology must not be used without providing a glossary of terms. Government Responsibility Government must provide IT resources that can verify ports are set up and operating correctly. When this is requested, the government response time should not exceed 24 hours. Government must provide and maintain proper VLAN and ACL for PAR Excellence Controllers and Scales to be able to communicate to the server. Government must provide adequate IP addresses for PAR Excellence controllers. Government must provide PAR Excellence's Support Staff with CAG access. *If remote access to server is required for installation or Support of software, or to resolve an issue, VA personnel must provide remote (escorted) access within 24 hours of request. The facility COR is the responsible POC for this responsibility. Government must always have one designated, appropriately qualified person to maintain security groups as required. Maintain at least one spare scanner, if scanners are used by Government in connection with the Services. Coordinate with PAR Excellence any support or maintenance needed with equipment provided by PAR. This includes but is not limited to commercially manufactured computers, protocol converters, printers, and all other devices associated with telecommunications and networking. Government must always have two appropriately qualified people who have been trained and by PAR Excellence who will be available to complete the following tasks: Turn the PAR Location equipment on or off Disconnect and reconnect power from the PAR Location equipment Change the battery of scanners, if used by Government Properly register and exchange PAR Location equipment Visually and verbally assist Service Provider in diagnosing PAR Location equipment problems. Maintain the system database. CHANGES TO STATEMENT OF WORK Any changes to this SOW must be authorized and approved only through written modifications to the contract by the CO. A copy of each modification will be kept in a project folder along with all other products of the project. Costs incurred by the contractor through the actions of parties other than the CO must be borne by the contractor. REPORTING REQUIREMENTS The contractor must provide the COR at each facility with monthly written progress reports. These are due to the COR by the second workday following the end of each calendar month, throughout the project's duration. The COR is required to provide monthly progress reports to the Contracting Officer by the fifth workday of the new calendar month. PAR will provide monthly reports to show support transactions that came into the PAR Help Desk via call or email. The progress report must be sent to the COR. CONFIDENTIALITY AND NONDISCLOSURE It is agreed that: The preliminary and final deliverables which have been generated by the contractor in the performance of this contract, are the exclusive property of the U.S. Government and must be submitted to the CO at the conclusion of the contract. Subject to and conditioned on Customer's and its Authorized Users' compliance with the terms and conditions of this Agreement, PAR hereby grants to Customer a non­ exclusive, non-transferable right to access and use the Software during the Term, solely for use by Authorized Users in accordance with the terms and conditions herein. Such use is limited to Customer's internal use. The CO will be the sole authorized official to release, verbally or in writing, any data, draft deliverables, final deliverables, or any other written or printed materials pertaining to this contract. No information must be released by the contractor. Any request for information relating to this contract, presented to the contractor, must be submitted to the CO for response. Press releases, marketing material, or any other printed or electronic documentation related to this project, must not be publicized without the written approval of the CO.

Full description on SAM.gov

Award Overview

Award Number

36C24526P0130

Award Amount (SAM.gov award notice)

$57.8K

Award Date

Dec 12, 2025

Awardee

Awardee UEI

N9LFJALEM6K7

Awardee CAGE Code

65TR8

Awardee Address

CINCINNATI, OH 45249, OH

Line Item Number

ALL

Original Solicitation

Notice ID: c62951bd46184d4b8a119e0c1dd713c5

Posted Date: Dec 12, 2025

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

5
  • 36C26327P0007
    PAR EXCELLENCE SYSTEMS, INC
    Department of Veterans AffairsNAICS 811210
    $302.5KSigned Oct 5, 2026
  • 36C25525P0270
    PAR EXCELLENCE SYSTEMS, INC
    Department of Veterans AffairsNAICS 811210
    $55.2KSigned Sep 8, 2026
  • 36C25025C0076
    PAR EXCELLENCE SYSTEMS, INC
    Department of Veterans AffairsNAICS 811210
    $182.3KSigned Jul 24, 2026
  • 36C25025C0076
    PAR EXCELLENCE SYSTEMS, INC
    Department of Veterans AffairsNAICS 811210
    $182.3KSigned Jul 9, 2026
  • 36C24726P0181
    PAR EXCELLENCE SYSTEMS, INC
    Department of Veterans AffairsNAICS 811210
    $456.1KSigned Jun 9, 2026

Contacts

Contracting Officer

Primary Contact

AMY WALTER
CONTRACTING OFFICER
Fax: NONE

Documents

Files (2)

  • 36C24526P0130_1.docx

    41 KBAdded in Award Notice version 6Posted
    Download
  • 36C24526Q0108_1.docx

    127 KBAdded in Special Notice version 4Posted
    Download

Lifecycle

  1. 4
    Version 4Special NoticeArchived

    J065--INTENT TO SOLE SOURCE | BASE PLUS FOUR OPTION YEARS 12/01/2025 to 11/30/2026 UCD 11/30/2030 | PAR Excellence Support & Service WASHINGTON DC VAMC (VA-26-00010740)

    Notice 7b283738cb2e448b9cff31535e3950d2 on SAM.gov

  2. 6
    Version 6Award NoticeArchivedCurrent

    Type changed from Special Notice to Award Notice

    J065--12/15/2025-12/14/2026 B 4 | 688C60118 | PAR Excellence Support & Service | SOLE SOURCE ONE BASE YEAR PLUS FOUR OPTION YEARS | WASHINGTON DC VAMC

    Notice c62951bd46184d4b8a119e0c1dd713c5 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Notice of The Intent to Sole Source to STERIS CORPORATION, 5960 Heisley Road, Mentor, Ohio 44060, United States. Response Due Date: 11/23/2026, by 7:00AM (EST) NOTICE OF THE INTENT TO SOLE SOURCE SYNOPSIS Network Contract Office 1, Procurement Office East on behalf of The Department of Veterans Affairs, VISN 1, Manchester VA Medical Centers intend to award a firm-fixed contract to STERIS CORPORATION to provide a Base plus four option year STERIS Endodry Service Agreement. The proposed procurement is for products and services for which the Government intends to solicit and negotiate with only one source under the authority of Soliciting from a Single Source using RFO FAR Part 12.201-1(a), Simplified procedures. The North American Industry Classification System code (NAICS) for this requirement is 811210. All responsible sources that feel they should be considered qualified to provide the above-mentioned products may submit a response to this notice (by the response due date shown above) to kurt.fritz@va.gov. The information provided shall include detailed (and relevant) documentation to allow the government to perform adequate market research and make a proper determination. A determination by the government not to compete this proposed requirement based upon responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE.
88%
Special Notice11/23/2026
85%
Solicitation11/25/2026
Department of Veterans Affairs (VA) Network Contracting Office 08 (NCO 08) hereby gives notice of the Government s intent to negotiate a sole source, Fixed-Priced Purchase Order with only one source Stryker Sales LLC, the Original Equipment Manufacturer (OEM), for the provision of ProCare preventive maintenance and repair services for existing Stryker Neptune Rover Medical Surgical Equipment located at the Bay Pines VA Healthcare System and Lee County Healthcare Clinic. This action is for services for which the Government intends to solicit and negotiate with only one source under the authority of Revolutionary FAR Overhaul 12.102 (a) and 41 USC §1901, only one will meet the Government s needs. Only one source is capable of responding due to the unique or specialized nature of the supplies and/or services. It is the Government s belief that the proposed candidate is the only authorized provider of the services and parts that can meet the agency s needs. This notice of intent is not a request for competitive quotes. Telephone requests will not be accepted. However, any business that believes it can meet the scope of work may give written notice to Gwendolynn.McCranely@va.gov by 10:00AM Eastern Standard Time on November 25, 2026. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Supporting evidence must be furnished in sufficient detail to demonstrate the ability to comply with the above requirement. Responses will be considered by the Government; however, a determination by the Government not to compete the proposed acquisition based upon responses of this notice is solely within the discretion of the Government. THIS SYNOPSIS DOES NOT COMMIT THE GOVERNMENT TO CONTRACT FOR ANY SUPPLY OR SERVICE. THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS SYNOPSIS.
85%
Pre-Solicitation11/25/2026
Department of Veterans Affairs (VA) Network Contracting Office 08 (NCO 08) hereby gives notice of the Government s intent to negotiate a sole source, Fixed-Priced Purchase Order with only one source Stryker Sales LLC, the Original Equipment Manufacturer (OEM), for the provision of ProCare preventive maintenance and repair services for existing Stryker Neptune Rover Medical Surgical Equipment located at the Bay Pines VA Healthcare System and Lee County Healthcare Clinic. This action is for services for which the Government intends to solicit and negotiate with only one source under the authority of Revolutionary FAR Overhaul 12.102 (a) and 41 USC §1901, only one will meet the Government s needs. Only one source is capable of responding due to the unique or specialized nature of the supplies and/or services. It is the Government s belief that the proposed candidate is the only authorized provider of the services and parts that can meet the agency s needs. This notice of intent is not a request for competitive quotes. Telephone requests will not be accepted. However, any business that believes it can meet the scope of work may give written notice to Gwendolynn.McCranely@va.gov by 10:00AM Eastern Standard Time on November 25, 2026. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Supporting evidence must be furnished in sufficient detail to demonstrate the ability to comply with the above requirement. Responses will be considered by the Government; however, a determination by the Government not to compete the proposed acquisition based upon responses of this notice is solely within the discretion of the Government. THIS SYNOPSIS DOES NOT COMMIT THE GOVERNMENT TO CONTRACT FOR ANY SUPPLY OR SERVICE. THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS SYNOPSIS.
85%
Pre-Solicitation11/25/2026
Page 1 of This is a Sources Sought Notice (a) The Government does not intend to award a contract on the basis of this Sources Sought or to otherwise pay for the information solicited. (b) Although "proposal," "offeror," contractor, and "offeror" may be used in this sources sought notice, any response will be treated as information only. It shall not be used as a proposal. The Government is seeking information for market research purposes only. (c) Any information received from a contractor in response to this Sources Sought may be used in creating a solicitation. Any information received which is marked with a statement, such as "proprietary" or "confidential," intended to restrict distribution will not be distributed outside of the Government, except as required by law. (d) This Sources Sought is issued by VISN 2 Contracting Office in Buffalo, New York for the purpose of collecting information about a requirement where the Contractor shall provide, preventative maintenance (PM) services on each piece of equipment outlined in this scope of work at the Albany VA Medical Center 113 Holland Avenue, Syracuse, NY 12208 . The VA is seeking to provide for this requirement as of January 1, 2027, The NAICS code identified for this requirement is NAICS Code 811210 - and NAICS Size standard of $34.0 Million. The requirement is detailed in the Statement of Work section of this document. (e) Cursory market research has identified small businesses that may be able to provide for this requirement. Contractors that are able to meet the requirements in the attachment and possess an interest in performing these service, are encouraged to email a capability statement and full information to Stephanie.Decker2@va.gov and reference 36C24227Q0103. - Part of the purpose of this sources sought is to determine the viability of set aside to a specific socio-economic category(service-disabled veteran owned small business, veteran owned small business, women owned small business, HUB Zone, 8(a), small business). Interested parties MUST provide company/individual name, a capability statement, examples of same or similar work performed at other facilities, SAM UEID number and address, point of contact and social-economic. If contractor is a Service-Disabled Veteran-Owned Small Business (SDVOSB), a Veteran-Owned Small Business (VOSB), or any other special category of contractors, then contractor is responsible for providing documentation in support of this. This information will be used to determine the viability of a set aside for this requirement. If any of the requested information is not supplied with the response, this may result in the contractor not being considered in the Government s Procurement Strategy. The following information is required for determining procurement strategy and viability of sources: Set aside requirements have limitations on subcontracting. This service is located in Manhattan, NY and Brooklyn, NY. Provide your site location and supporting documentation. Given your location and proximity to the service site, how do you plan to accomplish self-performance of this work? If your intention is to subcontract work, what tasks will be performed by you as the prime contractor? What tasks will require a subcontractor due to your inability to perform them within your company? How many years experience does your company have in performing tasks of this nature, of this scope and this complexity? How many years of service do your proposed technicians have performing tasks of this nature, this scope, and this complexity? How many years does your proposed subcontractor have in performing tasks of this nature, this scope, and this complexity? How many jobs of this nature, of this scope and this complexity have you performed in the past five years? How many certified/licensed technicians does your company currently employ? - Contractors shall also identify any Federal Supply Schedules that may carry the desired services. - Contractors shall identify pertinent point of contact for company, contractor SAM UEID number for size standard and socioeconomic verification in SAM and SBA certification database (VetCert), as well as for any intended subcontractors. - Contractor shall provide 2 to 3 instances of past experience which demonstrate that they are a firm regularly engaged in this type of work, to include subcontractors for those jobs. - Contractor shall provide a listing of any teaming agreements they intend to employ in the performance of this requirement if awarded. - Contractor shall supply proof of any applicable certification or training required to meet the regulatory requirements, if applicable. - Contractors shall include any relevant comments about the Attachment(s) if applicable. Below is the Limitation on Subcontracting Certificate of Compliance Clause. Please complete this as part of your response. 852.219-75Â VA Notice of Limitations on Subcontracting Certificate of Compliance for Services and Construction. As prescribed in 819.7011(b), insert the following clause: VA NOTICE OF LIMITATIONS ON SUBCONTRACTING CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN 2023) (DEVIATION) (a) Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Contracting Officer check the appropriate box below based on the predominant NAICS code assigned to the instant acquisition as set forth in FAR 19.102.] (i) [ X] Services. In the case of a contract for services (except construction), the contractor will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDVOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Other direct costs may be excluded to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service as set forth in 13 CFR 125.6. (ii) [ ] General construction. In the case of a contract for general construction, the contractor will not pay more than 85% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 85% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (iii) [ ] Special trade construction contractors. In the case of a contract for special trade contractors, the contractor will not pay more than 75% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 75% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (2) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (2) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (3) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee; (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating 18 U.S.C. 1001. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c) The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance with the limitations on subcontracting requirement. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror's bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror s bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee:_________________________ Printed Title of Signee: ____________________________ Signature: ____________________________________________ Date: _______________________ Company Name and Address:____________________________________________ Statement of Work (Abridged) Overview The Stratton VA Medical Center, Albany, NY has a requirement for Preventive Maintenance on their medical gas systems. We are currently seeking a full service and preventative maintenance contract. The contractor shall perform preventative maintenance (PM) services on each piece of equipment outlined in this scope of work. SCOPE OF WORK The contractor shall provide all labor, materials, and equipment necessary for a full preventive maintenance program. PM shall include annual inspection and testing of the equipment. It shall also include evaluation of the medical gas system in accordance with NFPA 99, VA specifications and the terms within this statement of work. Maintenance of Dental and Medical air compressors and Dental vacuum pumps ARE included in this contract. Work must be performed by only trained, and certified technicians on facility s Medical gas systems Period of Performance: The estimated period of performance shall be for one (1) Base Year of 12 months and four (4) 12-month option years. The Period of Performance reads as follows: Base Year 01/01/2027 12/31/2027 Option Year I 01/01/2028 12/31/2028 Option Year II 01/01/2029 12/31/2029 Option Year III 01/01/2030 12/31/2030 Option Year IV 01/01/2031 12/31/2031 Hours of Work: Facility s normal operating hours are between 7:00 AM to 4:30 PM Monday through Friday, except Federal Holidays. If circumstances arise that some work is to be performed outside normal business hours, the contractor shall communicate the proposed schedule with COR and Facility s Plumbing Shop Forman. Reports: The contractor will provide a copy of service report to the COR. The report will include a list of all preventive maintenance checks completed, as well as, identified problems and/or deficiencies found. The contractor will provide two inspection reports to the COR following completion of evaluation. The inspection documents will include, as a minimum, test parameters consisting of terminal performance, valve testing, cross connections, alarm testing, leak detection, equipment evaluation, contaminant, particulate and dewpoint testing. The service reports must be signed by both the service provider and the COR at completion of work. An electronic version of same shall be sent to the COR. Place of Performance: The work to be performed under this contract will be performed at Stratton VA Medical Center, 113 Holland Avenue, Albany, New York, 12208. PM Procedures: The contractor shall evaluate each existing oxygen, medical compressed air, vacuum and nitrous oxide systems. Sizing, flow, leaks, accessible piping, terminal performance, compressor or source configuration, valves, gauges, warning systems and alarms, back-up systems, vents, and contamination for compliance with current NFPA 99 specification and requirements. Contractor shall perform medical air purity test. Contractor employees shall be ASSE 6040 certified to perform maintenance and ASSE 6030 certified for inspection and testing. Minor repairs will be done while on station more difficult repairs or those needing additional parts will require a quote. There will be a system leak check using system gases and operational pressures done by the contractor where needed, tanks of appropriate gases will be used to facilitate testing. The system check will include originating equipment, patient rooms, clinic rooms, operating rooms (see Hours of Work), emergency rooms, and any room that contains outlets which are a part of the system. The unique inventory of outlets will be provided. Terminals: Terminal screws, front and back body O-rings, locking mechanism adjustment, lubrication, cleaning, flow/pressure measurement and locking mechanism verification. Valves: Rebuild leaking valves (ball type), cleaning and leaking inspection. Alarms: Contractor will provide lamp replacement, high- and low-pressure alarm calibration, cleaning and accuracy verification. Pro Flo Vacuum Enzyme Solution Injected to Aid SCFM Performance: Pro Flo enzyme solution will be injected into vacuum systems terminals, ringed and verified to maintain maximum SCFM with minimums of 3.0 SCFM required by NFPA, JCAHO Standards. Medical Oxygen System: Annually Test area alarms for proper pressure switch location and alarm function. Test Oxygen system for concentration and gaseous purity at each outlet. Test Oxygen for particulate contamination at least once in each zone. Tested with 0.45 micron filter device. Test Oxygen system for pressure at each zone. Test each Oxygen outlet for proper function, identification, adaptation and mechanical integrity. Identify leaking/malfunctioning outlets Identify outlets delivering substandard pressure/flow rates Test Oxygen zone shut-off valves for proper function, identification and mechanical integrity. Check Oxygen pipeline for proper identification labeling. Test each zone for available flow. Test operational pressure at each station outlet/inlet Test each critical care outlet operational pressure Test outlet flow rate and pressure drop with high demand at adjacent outlets. Test Oxygen system components for leakage. Check Oxygen system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.) Check for crossed lines. Medical Air System: Annually Test area alarms for proper pressure switch location and alarm function. Test Medical Air system gaseous purity. (Oxygen Concentration, Gaseous Hydrocarbons, Liquid Hydrocarbons, Carbon Monoxide, Carbon Dioxide, etc.). Test at source sample valve. Test Medical Air for particulate contamination at least once in each zone. Tested with 0.45 micron filter device Test source for dew point. Test Medical Air System for pressure at each zone. Test each Medical Air outlet for proper function, identification, adaptation, and mechanical integrity. Identify leaking/malfunctioning outlets Identify outlets delivering substandard pressure/flow rates Test Medical Air zone shut-off valves for proper function, identification, and mechanical integrity. Check Medical Air pipeline for proper identification labeling Test each zone for available flow. Test operational pressure tests at each station outlet/inlet Test each critical care outlet operational pressure test. Tested outlet flow rate and pressure drop with high demand at adjacent outlets Test Medical Air System components for leakage. Check Medical Air system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.) Check for crossed lines. Medical Surgical Vacuum System: Annually Test area alarms for proper pressure switch location and alarm function Test each Vacuum inlet for available flow rate SCFM Test operational pressure tests at each station outlet/inlet Tested each Vacuum inlet for proper function, identification, adaptation, and mechanical integrity. Identified leaking/malfunctioning inlets Identified inlets delivering substandard vacuum/flow rate Test all Vacuum zone valves for proper function, identification, and mechanical integrity Check Vacuum system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.). Check for crossed lines. Nitrogen System: Annually Test area alarms for proper pressure switch location and alarm function Tested Nitrogen system for particulate contamination. Tested with 0.45 micron filter device Test Nitrogen system for pressure at each zone. Test Nitrogen system outlets for proper function, identification, adaptation, and mechanical integrity. Identify leaking/malfunctioning outlets Identify outlets delivering substandard pressure/flow rate Test Nitrogen zone shut-off valve for proper function, identification, and mechanical integrity. Check Nitrogen pipeline for proper identification labeling. Test Nitrogen control panels for leakage and proper operation. Check Nitrogen system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.) Check for crossed lines. Check flexible connectors. Nitrous Oxide System: Annually Test area alarms for proper pressure switch location and alarm function Test Nitrous Oxide system for concentration Tested Nitrous Oxide system for particulate contamination. Tested with 0.45 micron filter device Test Nitrous Oxide system for pressure at each zone. Test each Nitrous Oxide outlet for proper function, identification, adaptation, and mechanical integrity. Identified leaking/malfunctioning outlets Identified outlets delivering substandard pressure/flow rates Test Nitrous Oxide zone shut-off valves for proper function, identification, and mechanical integrity. Check Nitrous Oxide pipeline for proper identification labeling. Test each Nitrous Oxide outlet for available flow. Test Nitrous Oxide pipeline components for leakage. Check Nitrous Oxide system components for proper installation (i.e.: Brazing, Labeling, - Hanging, etc.) Check for crossed lines. Check flexible connectors. Dental Air System: Annually Test Dental Air system for pressure Test Dental Air zone shut-off valves for proper function, identification, and mechanical integrity. Check Dental Air system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.). Check for crossed lines Evacuation/WAGD: Semi-Annually Test area alarms for proper pressure switch location and alarm function Test inches (of mercury) of E-VAC at each zone Test each E-VAC inlet for available flow rate SCFM. Tested pressure at each inlet in all critical care areas. Tested for flow rate and pressure drop with high volume demand on adjacent inlets Test each E- V AC inlet for proper function, identification, adaptation, and mechanical integrity. Identify leaking/malfunctioning inlets Identify inlets delivering substandard vacuum/flow rate Test all E-VAC zone valves for proper function, identification, and mechanical integrity Check E-VAC system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.). Check for crossed lines. Dental Vacuum System: Annually Check Dental Vacuum system components for proper installation (i.e.: Brazing, Labeling, Hanging, etc.). Check for crossed lines. Medical/Dental/Lab Air/Vacuum System Equipment Preventative Maintenance: Semi-Annually Examining items and to ensure that they maintain normal operating conditions Examining the seal fluid quality, quantity, temperature, and rate of rise against design specifications Examining the pump bearing and mechanical seals Inspection of all relays, transformers, contacts, sequencers, indicating lamps and the wiring in the panel for faults Greasing of the air and vacuum pump systems in accordance with manufacturer's specifications Inspection of demisters Cleaning of all flow control valves, strainers, suitcase separators so that they are free of debris to insure the pump reliability and longevity. Replacement of failed controls. These items include but are not limited to solenoid valves, flow switches, and air unload valves. Replacement parts shall be new. Check and replace belts if needed and equipped Repair Procedures: Emergency Repairs: An emergency repair shall be defined as one in which any portion of the medical gas, compressed air and vacuum systems is shutdown or is inoperable due to breakdown, malfunction, fire, or any other condition determined by the Contracting Officer s Representative (COR) or authorized Government inspector that presents an immediate danger to personnel or threatens to impair the mission of the facility. A mechanic shall be on the site ready to service the medical gas, compressed air, and vacuum systems within two (2) hours of receiving a request for emergency service call, 24 hours a day, 7 days a week. After receiving a request for emergency service, the work shall be prosecuted continuously until the emergency is arrested. Urgent Repairs: An urgent repair shall be defined as one in which the medical gas, compressed air and vacuum system may become inoperable due to malfunction or need for servicing or threatens to impair the mission of the facility. A mechanic shall be on the site to service the medical gas, compressed air, and vacuum systems within four (4) hours of receiving a request for urgent service, the work shall be prosecuted continuously until the urgent situation is arrested. Examples of urgent repairs includes: Medical gas system leaking seeping or weeping, power fluctuation affecting the system, or medical gas system no longer functioning. System shut down/standby: The government may direct the contractor to shut down the system at its convenience to allow other Government or contract work to be performed in that area. The contractor shall be available 24 hours a day, seven days a week. The Government will provide the contractor with a 24-hour notice of shut down service. At such time, the contractor will be provided the time and date of the shutdown, to include when the equipment will be back to operating status. The contractor is not required to be at the job site during the period the system is shutdown. The Contractor will be compensated for the actual time it takes to shut down the system and the actual time it takes to turn-on the system. Standby requires the Contractor to be at the job site during specified periods, as directed by the COR. Standby may be required when system is shutdown or when other work (i.e. construction, electrical outages, etc.) may adversely affect the system. The Contractor will be compensated for the entire standby period.
77%
Market Research11/12/2026

Additional Details

Solicitation Number

36C24526Q0108

Archive Date

Feb 10, 2026

Office Address

LINTHICUM, MD, 21090