GovChime
Notice ID: 6bd57c99fd7b4de9a4a8d8c8c16f0fd1Combined Synopsis/SolicitationArchived

6515--Liposuction Handpiece

Archived on December 27, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EST
Posted
December 10, 2025
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
339112: Surgical and Medical Instrument Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
245-NETWORK CONTRACT OFFICE 5 (36C245)
Place of performance
Baltimore MD VA Medical Center 10 N Greene Street
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
36C24526Q0172
Notice ID
6bd57c99fd7b4de9a4a8d8c8c16f0fd1

Description

Liposuction Handpiece Brand name or equal Seeking a power assisted Liposuction (PAL) Handpiece is being requested. This machine will improve the clinical process for completing breast reconstruction.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Theresa Thomas
Contracting Officer

Documents

Files (2)

  • 36C24526Q0172 Liposuction Handpiece.pdf

    613 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • 36C24526Q0172_1.docx

    23 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    6515--Liposuction Handpiece

    Notice 6bd57c99fd7b4de9a4a8d8c8c16f0fd1 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Sources Sought Notice Sources Sought Notice Page 16 of 16 Sources Sought Notice *= Required Field Sources Sought Notice Page 1 of 16 REQUEST FOR INFORMATION 1. DESCRIPTION The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Surgical Tissue Management System product line as a candidate for a VA-wide (otherwise referred to as national ) single Requirements contract award. The Department of Veterans Affairs (DVA) Office of Procurement, Acquisition and Logistics (OPAL) Strategic Acquisition Center (SAC) on behalf of VHA is issuing this Sources Sought Notice in accordance with the FAR 10.001(b) to determine the availability and technical capabilities of qualified sources. The SAC in conjunction with VHA is seeking a qualified source to provide Olympus ESG-410 brand name or equal for the Surgical Tissue Management System on an agency wide basis. VA intends to award a Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contract to a supplier of this equipment. Vendors will be required to deliver the Surgical Tissue Management System to VA medical centers and facilities throughout the United States and its territories. The anticipated period of performance is for one (1) 12-month base period with four (4) 12-month option periods from the date of award. However, the Government's decision as to whether to continue with the contract, upon annual review, will be based upon successful performance during each previous year and continued need. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 - Surgical Appliance and Supplies Manufacturing, Product Service Code: 6515 Medical and Surgical Instruments, Equipment, and Supplies and the associated size standard is 1,000 employees. The FAR Provision found at 52.204-7(b)(1) requires that All interested Offerors must be registered in SAM.gov prior to submitting an offer or quotation. You may access the website at SAM.gov | Home. All offerors must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB offerors must be verified in the SBA database at: https://veterans.certify.sba.gov/#search at the time of quote submission. This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This Sources Sought Notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to their current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes. 2. SCOPE OF WORK: The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Surgical Tissue Management System product line as a candidate for a VA-wide (otherwise referred to as national ) Requirements contract. The Surgical Tissue Management System is an advanced, energy-based surgical platform used across Veterans Affairs Medical Centers (VAMCs) in operating rooms, procedural suites, and endoscopy units to perform precise tissue coagulation, devitalization, cutting, and vessel sealing. The system delivers radiofrequency (RF) energy and ultrasonic energy through specialized electrodes and hand instruments to support uniform, noncontact coagulation with minimal tissue penetration, improved visualization, and reduced bleeding. Units that provide both radio frequency power to drive electrosurgical instruments and mechanical vibrations to power ultrasonic surgical instruments used in the process of joining or sealing blood vessels together. The unit typically features receptacle ports, various output settings, power levels, and control mechanisms to adjust the energy delivered to the surgical site. It may also have features such as audible alarms, power monitoring, and temperature regulation. This universal platform provides multiple energy modalities (ultrasonic, bipolar, and RF) to support a broad range of open, laparoscopic, and endoscopic procedures in general surgery, urology, and gynecology, helping reduce the number of separate generators and instruments required in the operating room. It is designed to enhance surgical efficiency, improve hemostasis, and support consistent, replicable outcomes across diverse clinical applications The primary hand instrument is a hybrid ultrasonic and bipolar electrosurgical device intended for use in open and laparoscopic procedures to cut, seal, coagulate, and dissect with two distinct modes of action: Seal & Cut and Seal Only. It is indicated for ligation and division of vessels (up to and including 7 mm), lymphatics, and tissue bundles, and may be used in minimally invasive or open surgical procedures where vessel sealing and tissue division are desired. The device is intended for single use only and has not been shown to be effective for tubal sterilization or tubal coagulation for sterilization procedures. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Surgical Tissue Management Systems to be used by clinicians throughout the VA medical centers and facilities. The period of performance is for a base of 12-months with four 12-month option periods. 3. REQUIREMENT This requirement will be solicited and awarded as a Brand Name or Equal which requires the quoter indicate that each product being offered as an equal product to the Olympus ESG-410 Surgical Tissue Management System. For each equal product, the offeror must include a description reflecting the salient characteristics (SC) and level of quality that will satisfy the salient physical, functional, or performance characteristics of the equal product(s) specified in the solicitation. The quoter must also clearly identify the item by brand name (if any) and make/model number. Finally, the quoter must include descriptive literature, such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer and clearly describe any modifications it plans to make to a product to make it conform to the solicitation requirements. Contract Line Items Manufacture Part Number Description Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4 001 Olympus WA91327U ESG-410 Surgical Energy Platform (SEP) 10 10 10 10 10 002 Olympus WA91302W Footswitch Double Pedaled, Wireless 10 10 10 10 10 003 Olympus WA91301W Footswitch Double Pedaled, Wired 10 10 10 10 10 004 Olympus WA95622A Power Cable, 4.5M, with angled plug 10 10 10 10 10 005 Olympus TC-E410 Cart 10 10 10 10 10 006 Olympus 784515 784515 PK FRONT LOADING SUPERSECT 5EA 10 10 10 10 10 007 Olympus WA22739S ESG PlasmaLoop - Long, Angled 10 10 10 10 10 008 Olympus WA22644S SP PlasmaNeedle - Long, Right-Angled 10 10 10 10 10 009 Olympus WA22742S ESG PlasmaLoop - Long, Small 10 10 10 10 10 010 Olympus WA22744S ESG PlasmaNeedle - Long, Right-Angled 10 10 10 10 10 011 Olympus WA22641S SP Plasma-OvalButton - Long 10 10 10 10 10 012 Olympus WA22666S SP Plasma-OvalButton 10 10 10 10 10 013 Olympus WA22741S ESG Plasma-OvalButton - Long 10 10 10 10 10 014 Olympus WA22766S ESG Plasma-OvalButton 10 10 10 10 10 015 Olympus 786500 786500 PK FRONT LOADING BUTTON 5EA 10 10 10 10 10 016 Olympus WA22657S SP PlasmaButton 10 10 10 10 10 017 Olympus WA22637S SP PlasmaLoop - Long, Medium 10 10 10 10 10 018 Olympus WA22638S SP PlasmaRoller - Long 10 10 10 10 10 019 Olympus WA22639S "SP PlasmaLoop - Long, Angled" 10 10 10 10 10 020 Olympus WA22737S ESG PlasmaLoop - Long, Medium 10 10 10 10 10 021 Olympus WA22738S ESG PlasmaRoller - Long 10 10 10 10 10 022 Olympus 784415 784415 FRONT LOADING SUPER-LOOP 5EA 10 10 10 10 10 023 Olympus WA22602S SP PlasmaLoop - Medium, 12 10 10 10 10 10 024 Olympus WA22603S SP PlasmaLoop - Large, 12 10 10 10 10 10 025 Olympus WA22606S SP PlasmaLoop - Medium, 30 10 10 10 10 10 026 Olympus WA22607S SP PlasmaLoop - Large, 30 10 10 10 10 10 027 Olympus WA22621S SP PlasmaBand - 12 10 10 10 10 10 028 Olympus WA22623S SP PlasmaBand - 30 10 10 10 10 10 029 Olympus WA22632S SP PlasmaLoop - Angled 10 10 10 10 10 030 Olympus WA22651S SP PlasmaRoller 10 10 10 10 10 031 Olympus WA22655S SP PlasmaNeedle - Angled 10 10 10 10 10 032 Olympus WA22605S SP PlasmaLoop - Small, 30 10 10 10 10 10 033 Olympus WA22702S ESG PlasmaLoop - Medium, 12 10 10 10 10 10 034 Olympus WA22703S ESG PlasmaLoop - Large, 12 10 10 10 10 10 035 Olympus WA22706S ESG PlasmaLoop - Medium, 30 10 10 10 10 10 036 Olympus WA22707S ESG PlasmaLoop - Large, 30 10 10 10 10 10 037 Olympus WA22721S ESG PlasmaBand - 12 10 10 10 10 10 038 Olympus WA22723S ESG PlasmaBand - 30 10 10 10 10 10 039 Olympus WA22732S ESG PlasmaLoop - Angled 10 10 10 10 10 040 Olympus WA22751S ESG PlasmaRoller 10 10 10 10 10 041 Olympus WA22755S ESG PlasmaNeedle - Angled 10 10 10 10 10 042 Olympus WA22760S ESG PlasmaButton 10 10 10 10 10 043 Olympus WA22640S SP PlasmaNeedle - Right-Angled 10 10 10 10 10 044 Olympus WA22642S SP PlasmaLoop - Long, Small 10 10 10 10 10 045 Olympus WA22705S ESG PlasmaLoop - Small, 30 10 10 10 10 10 046 Olympus WA22740S ESG PlasmaNeedle - Right-Angled 10 10 10 10 10 047 Olympus A22265C A22265C KNIFE 24-28FR 12/30 DEG 10 10 10 10 10 048 Olympus A22221C A22221C HF BAND 24 FR 12 DEG 10 10 10 10 10 049 Olympus A22257C A22257C HF CYL GROOVES 24-28FR 12/30DEG 10 10 10 10 10 050 Olympus WA22037C WA22037C HF LOOP 12DEG 12EA 10 10 10 10 10 051 Olympus WA22038C WA22038C HF ROLLER LONG 12DEG 12EA 10 10 10 10 10 052 Olympus WA22039C WA22039C HF ANGLED LOOP LONG 12EA 10 10 10 10 10 053 Olympus A22258C A22258C HF ROLLER LARGE 24-28FR 12/30DEG 10 10 10 10 10 054 Olympus A22205C A22205C HF LOOP 24FR .35 WIRE 30 DEG 10 10 10 10 10 055 Olympus A22261A A22261A CURETTE 24-28FR 12/30 DEG 10 10 10 10 10 056 Olympus A22201C A22201C HF LOOP 24FR .35 WIRE 12 DEG 10 10 10 10 10 057 Olympus A22201D A22201D HF LOOP 24 FR .2 WIR E 10 10 10 10 10 058 Olympus A22202C A22202C HF LOOP 26FR .35 WIRE 12 DEG 10 10 10 10 10 059 Olympus A22205D A22205D HF LOOP 24FR .2 WIRE 30 DEG 10 10 10 10 10 060 Olympus A22206C A22206C HF LOOP 26 FR .35 WIRE 30 DEG 10 10 10 10 10 061 Olympus A22231C A22231C HF ANGLED LOOP 24-28FR .35 WIRE 10 10 10 10 10 062 Olympus A22251C A22251C HF ROLLER 24-28FR 12/30DEG 10 10 10 10 10 063 Olympus A22253C A22253C HF NEEDLE 90 DEG 24-28FR 12DEG 10 10 10 10 10 064 Olympus A22255C A22255C HF 45DEG NEEDLE 24-28FR 12/30DEG 10 10 10 10 10 065 Olympus VE-B VE-B VaporTrode 10 10 10 10 10 066 Olympus VE-LG VE-LG VAPORTRODE GROOVED 10 10 10 10 10 067 Olympus VE-S VE-S Spiked VaporTrode 6EA 10 10 10 10 10 068 Olympus VE-F VE-F VAPORTRODE FLUTED BAR 10 10 10 10 10 069 Olympus MLE-24-010 MLE-24-010 CUTTING LOOP 12EA 10 10 10 10 10 070 Olympus MLE-24-012 MLE-24-012 CUTTING LOOP 12EA 10 10 10 10 10 071 Olympus MLE-24-015 MLE-24-015 CUTTING LOOP 12EA 10 10 10 10 10 072 Olympus MLE-26-010 MLE-26-010 CUTTING LOOP 12EA 10 10 10 10 10 073 Olympus MLE-26-012 MLE-26-012 CUTTING LOOP 12EA 10 10 10 10 10 074 Olympus MLE-26-015 MLE-26-015 CUTTING LOOP 12EA 10 10 10 10 10 075 Olympus MLE-28-012 MLE-28-012 CUTTING LOOP 12EA 10 10 10 10 10 076 Olympus MLE-28-015 MLE-28-015 CUTTING LOOP 12EA 10 10 10 10 10 077 Olympus MLES-24-015 MLES-24-015 CUTTING LOOP 12EA 10 10 10 10 10 078 Olympus RE-28 RE-28 ROLLER ELECTRODE 28FR 10 10 10 10 10 079 Olympus BE-208 BE-208 FULG ELECT LONG TIP 105CM 6EA 10 10 10 10 10 080 Olympus BE-202 BE-202 FULGUR ELECT SHORT TIP 105CM 6EA 10 10 10 10 10 081 Olympus KE-24 KE-24 ELITE KNIFE ELECTRODE 6EA 10 10 10 10 10 082 Olympus KE-28 KE-28 KNIFE ELECTRODE 10 10 10 10 10 083 Olympus RAK-26 RAK-26 RIGHT ANGLE KNIFE ELEC 6EA 10 10 10 10 10 084 Olympus RE RE ROLLER BALL 6 EA 10 10 10 10 10 085 Olympus BE-308 BE-308 FULGURATNG ELECT LG TIP 105CM 6EA 10 10 10 10 10 086 Olympus KE-26 KE-26 ELITE KNIVE ELECTRODE 26FR 6EA 10 10 10 10 10 087 Olympus 287 287 Flexible Electrode 10 10 10 10 10 088 Olympus BE-302 BE-302 FULGUR ELECT SHORT TIP 105 CM 6EA 10 10 10 10 10 089 Olympus A3559 A3559 KNIFE SEMI-CIRC FLEX TIP FOR A3550 10 10 10 10 10 090 Olympus RCE-336 RCE-336 RITECUT CUTTING ELECTRODE 10 10 10 10 10 091 Olympus RCE-3115 RCE-3115 RITECUT CUTTING ELECTRODE 10 10 10 10 10 092 Olympus DAC DAC ELITE & USA DISPOSABLE AC TIVE CORD 10 10 10 10 10 093 Olympus A3556 A3556 KNIFE SEMI-CIRC 4FR CHAN FOR A3550 10 10 10 10 10 094 Olympus A3555 A3555 KNIFE LANCET TYPE FOR A3550 10 10 10 10 10 095 Olympus A3557 A3557 KNIFE SERRATED FOR A3550 10 10 10 10 10 096 Olympus A3558 A3558 KNIFE SEMI-CIRCULAR FOR A3550 10 10 10 10 10 097 Olympus WA35057A WA35057A KNIFE SERRATED TYPE FOR A3550 10 10 10 10 10 098 Olympus 00107 00107 BUTTON ELECTRODE 4FR 10 10 10 10 10 099 Olympus 00108 00108 BUTTON ELECTRODE, 5FR 10 10 10 10 10 100 Olympus 00110 00110 BUTTON ELECTRODE, 7FR 10 10 10 10 10 101 Olympus 00111 00111 FLEX BUTTON ELECTRODE 8FR 10 10 10 10 10 102 Olympus A37020A A37020A PED HF ELECT BUTTON 3FR X 280MM 10 10 10 10 10 103 Olympus WA35055A WA35055A KNIFE LANCET CENTERED FOR A3550 10 10 10 10 10 104 Olympus 00109 00109 BUTTON ELECTRODE, 6FR 10 10 10 10 10 105 Olympus A0275 A0275 BUTTON ELECTRODE 9FR 10 10 10 10 10 106 Olympus A37010A A37010A PEDI KNIFE STRT FOR A37014A 10 10 10 10 10 107 Olympus A3753 A3753 LOOP ELECTRODE PEDIATRIC 10 10 10 10 10 108 Olympus A00010A A00010A HF CABLE UNIPOLAR 4M OLYMPUS 10 10 10 10 10 109 Olympus A00012A A00012A HF CABLE UNIPOLAR 4M VALLEYLAB 10 10 10 10 10 110 Olympus A37009A A37009A PEDIATRIC KNIFE HOOK FOR A37014A 10 10 10 10 10 111 Olympus A37011A A37011A PED HF RESECT ELECT FOR A37014A 10 10 10 10 10 112 Olympus A37013A A37013A PED HF ELECTRODE HOOK A37014A 10 10 10 10 10 113 Olympus WA00393S HF cable, monopolar, 4m single use 10 10 10 10 10 114 Olympus 253F6 253F6 FLEX FULG ELECT DOMED TIP 37 CM 10 10 10 10 10 115 Olympus 253F8 253F8 FLEX FULG ELECT SOMED TIP 37 CM 10 10 10 10 10 116 Olympus 256F6 256F6 FLEXIBLE FULG ELECT CON TIP 37CM 10 10 10 10 10 117 Olympus 256F8 256F8 FLEXIBLE FULG ELECT CON TIP 37CM 10 10 10 10 10 118 Olympus 257F6 257F6 FLEX ELECTRODE 10 10 10 10 10 119 Olympus 257F8 257F8 FLEX FULG ELECT BALL TIP 37 CM 10 10 10 10 10 120 Olympus A00011A A00011A HF CABLE UNIPOLAR 4M ERBE/MARTIN 10 10 10 10 10 121 Olympus ET ET TUBING FOR ELLIK/TOOMEY ADAPT 6EA 10 10 10 10 10 122 Olympus RAK-24 RAK-24 RIGHT ANGLE KNIFE ELEC 6EA 10 10 10 10 10 123 Olympus RB RB ROLLER BAR 6EA 10 10 10 10 10 124 Olympus 243 243 Flexible Bugbee Electrode, 37C M 10 10 10 10 10 125 Olympus 245 245 FLEX BALLENGER Follicle ELECT 37CM 10 10 10 10 10 126 Olympus WT630111 WT630111 Suction tube, for smoke evacuation 10 10 10 10 10 127 Olympus HYVV120 OR-VAC Surgical Smoke Evacuator 10 10 10 10 10 128 Olympus MAJ-1939 MAJ-1939 SMOKE EVACUATION FOOT SWITCH 10 10 10 10 10 129 Olympus TD-SB400 TD-SB400 SONICBEAT Transducer 10 10 10 10 10 130 Olympus SB-0520FC SB-0520FC (EN) SET (5PCS) 10 10 10 10 10 131 Olympus SB-0535FC SB-0535FC (EN) SET (5PCS) 10 10 10 10 10 132 Olympus SB-0545FC SB-0545FC (EN) SET (5PCS) 10 10 10 10 10 133 Olympus SB-0545PC SB-0545PC SONICBEAT 45cm, 5mm, pistol 10 10 10 10 10 134 Olympus PS-0523CJDA "POWERSEAL 5MM, 23CM, CURVED JAW SEALER 10 10 10 10 10 135 Olympus PS-0537CJDA "POWERSEAL 5MM, 37CM, CURVED JAW SEALER 10 10 10 10 10 136 Olympus PS-0544CJDA "POWERSEAL 5MM, 44CM, CURVED JAW SEALER 10 10 10 10 10 137 Olympus UHI-4 UHI-4 45L HIGHFLOW INSUFFLATION UNIT 10 10 10 10 10 138 Olympus WA90500US Pneumoliner Containment System 10 10 10 10 10 The Department of Veterans Affairs (VA) is seeking vendors who can provide Olympus ESG-410 Surgical Tissue Management System or equal as listed above which meet all the salient characteristics listed below. Vendors may quote any product solution or configuration so long as they meet the salient characteristics. Products quoted in the technical volume must be captured on the Vendor s pricing volume (Attachment A, Price Cost Schedule) of the solicitation. Vendors may quote any additional ancillary products which they deem to be essential to the functionality of the proposed solution; these items must be captured in the Vendor s pricing volume with a quantity of zero. CLIN s 0001-0005 apply to the following SC s SC # SALIENT CHARACTERISTICS METHOD OF EVALUATION SC Literature Map Olympus ECG-410 ConMed System SC 1 Must be cleared by the U.S. Food and Drug Administration (FDA) Literature Review FDA 510k look up search page 1 FDA 510k look up search page 1 SC 2 Must provide Hybrid Energy, Advanced Bipolar, Ultrasonic Energy, Monopolar and Bipolar, Plasma energy types/modes Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 3 Must provide a centralized color touchscreen user interface that allows the operator to select, monitor, and adjust at minimum: Electrosurgical mode (e.g., monopolar cut, monopolar coag, bipolar); Output power settings (watts); Application-relevant parameters; and Treatment or activation time (timer or activation counters). Literature Review Instruction Manual page 2 System 2450 user manual Page 2-2 SC 4 Must have Contact quality monitoring (CQM) that detect these three types of insufficiencies regarding the neutral electrode. The neutral electrode is detaching from the patient. The neutral electrode is disconnected. Short circuit of the neutral electrode. Literature Review Instruction Manual Page 28 System 2450 user manual Page 2-7 SC 5 Must provide monopolar, bipolar and universal connection Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 6 Must provide both wireless and wired footswitch options Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 7 Must be compatible with smoke evacuation and insufflation systems Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 8 Output energy monopolar cut > 300W monopolar coag >200W bipolar cut > 100W (320 saline) bipolar coag > 120W (200 saline) Literature Review ECRI Market Intelligence Report Page 2 ECRI Market Intelligence Report Page 2 SC 9 Must include a minimum one year manufacturer warranty covering parts and labor Literature Review ESG-410 Urology Brochure Page 2 System 2450 user manual Page 2 Design Design features and functions of the offered device will be evaluated for its ability to aid in the performance of its intended function. Areas include but are not limited to the following: Ability to integrate with other Surgical Equipment Probe functions/versatility Customization for various procedures (options) Irrigation options/availability Number and variety of input/outputs connection/ports for peripheral devices Types of procedures supported Performance The Device will be evaluated for its ability to perform its intended function. Areas included but are not limited to: Touch Screen features and ease of use Workflow performance of complete system Types/modes of energy (above and beyond what is in the SCs) Power adjustability Safety The device will be assessed for patient safety features, including, but not limited to, the following areas: Audible tones and visual alarms Contact monitoring data display Quality/Service /Training Training - Availability and options Service - Terms and conditions Warranty Terms and conditions Again, for each product (brand name and part number), the response must include descriptive literature demonstrating the product meets or exceeds the salient characteristics specified above. The Government's intent is to include all ancillary items to ensure the equipment can function as designed by the Original Equipment Manufacturer (OEM) and as clinically required. Vendors are encouraged to provide any product solution or configuration so long as they meet the salient characteristics. Additionally, responses can include any additional product that may be beneficial. These items must be clearly identified by brand name and part number. Responses to this Sources Sought Notice shall include the following: Does vendor offer an annual service plan, Yes or No? If Yes: What does the plan cover? Does plan cover software updates only? Does the plan cover parts repair or replacement only? Does the plan cover both software and parts? Vendors are requested to provide documentation that shows information on their service plan. Is the service provided by the OEM or a subcontractor? Full name and address of company DUNS number/ CAGE Code/ SAM UIE Business Size Manufacturer or Distributor: If distributor - provide full name, business size and address of manufacturer. Country of Origin designation for all products Ability to provide uninterrupted supply of products on a national scale. Technical Literature that clearly shows product(s) meets the identified salient characteristics and page numbers where each salient characteristic is met. Any additional product solution or configuration that would be beneficial to the clinical functionality of the product line identified. Authorized Distributor Letter Certified by OEM with a current date. Although not required, vendors responding to this Sources Sought may also submit a Capabilities Statement.
72%
Market Research04/06/2026
This RFI is solely for information and planning purposes and does not constitute a solicitation or obligation on the part of the Government. Per FAR 15.201(e), responses to this notice are not considered offers, shall not be used as a proposal, and cannot be accepted by the Government to form a binding contract. Neither unsolicited proposals nor any other kinds of offers will be considered in response to this notice. No evaluation letters and/or results will be issued to the respondents; however, the Government does reserve the right to contact any respondent and/or respondent reference to obtain additional information. At this time, no solicitation exists; therefore, please do not request a copy of the solicitation. Any resulting procurement action will be the subject of a separate, future announcement. The information is provided for discussion purposes and any potential strategy for this acquisition may change prior to any solicitation release. The acquisition strategy, evaluation methodology, contract type, and any other acquisition decisions are to be determined. STATEMENT OF WORK (SOW) Contract Title. Philips VS30 Batteries Background. Replacement: The DC VA Medical Center has a requirement to replace the existing Philips Medical VS30 Vital Signs batteries. The current VS30 vital signs batteries were purchased in 2025, have reached end of life, and are no longer usable. The VS30 battery life is 2 years and aligns with OEM preventative maintenance (PM) requirements. Only the VS30 vital signs monitors are being impacted, and the batteries must fully integrate with the existing Philips VS30 devices. Also requesting additional scanners for deployment and inventory. Scope of Work. The procurement shall include all parts, materials, labor, software/licenses, resources, and training required to implement and utilize the equipment/system to their fullest capacity. All items must be covered by manufacturer s warranty and procured through a manufacturer-approved distribution channel. Distributers and resellers must be able to document ability to provide items through manufacturer-approved distribution channels upon request. Specifications. 4.1 Equipment Line Item Description Quantity BATTERY PACK, 9-CELLS LITHIUM-ION, BLACK, 7.8AH CAPACITY, 11.1V VOLTAGE, FOR USE WITH: FOR VS30 EARLYVUE MONITOR by Philips / 989803199221 400 Periph HS-1 RFID Barcode Scanner (HS-1RS) / 989803225411 30 VSM roll stand barcode scanner holder / 989803210381 30 4.2 Required Features This battery must be the exact same as the BATTERY PACK, 9-CELLS LITHIUM-ION, BLACK, 7.8AH CAPACITY, 11.1V VOLTAGE, FOR USE WITH: FOR VS30 EARLYVUE MONITOR by Philips / 989803199221 to be compatible with the Philips VS30 Vital Signs monitor. Battery Capacity: 7.35 Ah Battery Chemistry: Lithium Ion Dimensions: 5.88 x 3.50 x 0.78 in Weight: 2.87 lbs Voltage: 11.1V The scanners must be the HS-1RS model to ensure compatibility and connectivity with active workflow and environment. Other scanners will require added costs, procedures, and networking which is not included in this package. Specific Tasks. 5.1 Delivery. All equipment shall be delivered to: Washington DC VA Medical Center 50 Irving St NW Washington, DC 20422 ATTN: VHAWAS Equipment Committee Contract VA Purchase Order (PO) number shall be included with delivery information (e.g., packing slip). Note: PO number starts with station code 688 followed by a letter and 5 digits (e.g., 688A12345) Delivery Hours: The Warehouse is open to receive deliveries Monday through Friday, 8:00 a.m. to 4:00 p.m., excluding holidays. Contractor shall coordinate delivery with the on-site Point of Contact (POC) and provide shipment tracking information. Contractor shall verify delivery date and time with the on-site POC at least 3 business days prior to scheduled delivery. Delivery is required within 90 days from award of the contract. 5.2 On Site Procedures. COVID-19 Screening: All persons entering the facility shall be subject to screening for COVID-19 per the current CDC (Center for Disease Control) guidelines. Mask Requirement: All contractors shall wear masks while indoors. Contract personnel are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government Officials. Time spent on site shall be for a period sufficient to complete the work set forth in the statement of work. On site visits shall be scheduled in advance with the designated on-site POC. Contractor shall check in and out with Biomedical Engineering prior to visiting the worksite for each day of work. The VA campus is non-smoking. Contractor personnel are required to comply with this policy. Parking: it is the responsibility of the Contractor to park in the appropriate designated parking areas. Contractor personnel s tool bags are subject to inspection. 5.3 Installation/Implementation. Installation/Implementation will be completed by personnel certified and knowledgeable with the designated equipment/system. Installation shall be completed within the period of performance. Contractor shall be responsible for any Personal Protection Equipment (PPE) required when performing work on site. Contractor shall submit all removable media to be used on a VA system to Biomedical Engineering for scanning with anti-virus software prior to use. In the case turn-in, exchange, repair, or replacement of equipment containing hard drives used by the VA, the hard drives shall be removed from the equipment and remain in possession of the VA (this includes loaned or rented equipment). The contractor shall take all necessary precautions to prevent damage to any government property. The contractor shall report any damages immediately and shall be assessed current replacement costs for property damaged by the contractor, unless corrective action is taken. Any damaged material (i.e., trees, shrubs, lawn/turf, curbs, gutters, sidewalks, etc.) will be replaced in a timely manner or corrected by the contractor with like materials, at no extra cost to the government, upon approval of the Contracting Officer. 5.4 Training. Contractor shall be responsible for providing training to clinical staff/users. Training is to be scheduled in advance with the designated on-site POC. Education shall be provided prior to and/or at time of installation. Education professional shall be certified to provide instruction on the designated equipment/system. Education curriculum must include: operations and set-up, user maintenance, safety, and user troubleshooting tips. 5.5 Inspection and Acceptance. Contractor shall conduct a joint inspection with the on-site POC upon completion of installation. In the event deficiencies are identified, the contractor shall provide the date when the identified deficiencies will be addressed if not addressed on the date of installation. The Contractor shall conduct a joint inspection with the on-site POC after addressing all deficiencies. All deficiencies identified in the joint inspections shall be corrected by the Contractor prior to Government acceptance of the item. Any disputes shall be resolved by the Contracting Officer. 5.6 Deliverables. The Contractor shall provide the below documentation for the proposed equipment to VHAWASEquipmentRequests@va.gov within 10 business days of work completion: Service report. Warranty information. Electronic copy of the Operators Manual. Electronic copies of the complete technical service manuals, including troubleshooting guides, necessary diagnostic software and equipment information, schematic diagrams, and parts lists. Hours of Operation. DC VAMC s normal business hours are Monday-Friday, 8:00 am to 4:30 pm, excluding observed Federal holidays: New Year s Day Labor Day Martin Luther King s Birthday Columbus Day President s Day Veteran s Day Memorial Day Thanksgiving Day Juneteenth Christmas Day Independence Day Any other national holiday as declared by the President of the United States Period of Performance. Delivery within 90 days from contract award. Invoicing. Contractor shall submit a consolidated invoice monthly in arrears of the month for which services are being billed. One all-inclusive monthly invoice shall be provided, which shall contain an invoice number, contract number, obligations order number, and an itemized list of services provided. An acceptable master (all-inclusive) itemized list of services shall be agreed to between the Contractor and the COR prior to submission of the first invoice. All invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests. VA s Electronic Invoice Presentment and Payment System (IPPS) The VA Financial Services Center (FSC) uses a third-party contractor, Tungsten, to transition vendors from paper to electronic invoice submission. Please go to this website to begin submitting electronic invoices, free of charge: http://www.tungsten-network.com/US/en/veterans-affairs/. More information on the VA FSC is available at: http://www.fsc.va.gov/einvoice.asp. Vendor e-Invoice Set-Up Information: To begin submitting your electronic invoices to the VA FSC for payment processing, free of charge, please contact Tungsten at the below phone number or email address: Tungsten e-Invoice Setup Information: 1-877-489-6135 Tungsten e-Invoice Email: VA.Registration@Tungsten-Network.com If you have a question about the e-invoicing program or Tungsten, please contact the FSC at the below phone number email address. FSC e-Invoice Contact Information: 1-877-353-9791 FSC e-Invoice Email: vafsccshd@va.gov Contract Type. Firm-Fixed Priced Contract RESPONSES: Please include descriptive literature demonstrating the product meets or exceeds the brand name product specified above. Please provide any product solution or configuration so long as they are equivalent to the brand name product. Responses can include any additional product that may be beneficial. These items must be clearly identified by brand name and part number. PLEASE PROVIDE THE FOLLOWING ADDITIONAL INFORMATION: Full name and address of company DUNS number/ CAGE Code/ SAM UEI Business Size Manufacturer or Distributor If distributor, provide full name, business size and address of manufacturer. Country of Origin designation for all products. Technical Literature that clearly shows product(s) are equivalent. Any additional product solution or configuration that would be beneficial to the functionality of the product line identified.  Authorized Distributor Letter Certified by OEM with a current date.Â
70%
Market Research11/19/2026
SIX (6) MIDMARK 626 BARRIER FREE EXAM CHAIRS
69%
Market Research11/19/2026
please see attahced award
69%
AwardedOpen
1. Title: Stryker PowerPro2 Ambulance Cot System 2. Purpose: The Network Contracting Office (NCO) 16 located at 5075 Westheimer Road, Galleria Financial Center, Suite 750, Houston, Texas, hereby issues the following Sources Sought to Request Information (RFI) with the intent of determining the contractor interest, capabilities, qualifications of potential businesses, nonmanufacturer rule compliance, Buy American Act compliance, Trade Agreement compliance and estimated industry pricing information for market research and estimated budgetary purpose for Stryker PowerPro2 Ambulance Cot System. Contractor shall provide all shipping, installation (if required), equipment, personnel, labor and testing for name brand. This Sources Sought is published for market research purposes. This Sources Sought will be used to determine if a set-aside for any small business program is appropriate. Government anticipates competitive, firm fixed price contract. Please review this announcement, respond to questions below and review all attachments in their entirety. Government requests that interested offerors complete all questions below, provide required documentation, descriptive literature and authorization letter as described below. The Government is in no way obligated to do business with or to enter into any form of contract with any person, firm or other entity that receives or responds to this announcement. a. Contractors shall provide their point(s) of contact name, address, telephone number, and email address, and the company's business size, and SAM Unique Entity Identification Number. b. Is your company a small business, SDBs, HUBZone, or 8A concern? Please provide proof of qualifications. b. Does your company meet all required four prong factors for the Nonmanufacturer Rule (NMR) per guidance of SBA and 13 C.F.R. § 121.406 Offer must answer all questions below. 1. Does your company exceed the 1250 employee alternative size standard for nonmanufacturers? ___ 2. Is your company primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied? __________ 3. Does your company must take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice? __________ 4. Does your company supply the end products of a small business manufacturer or processor made in the United States? _____________ c. Is your company considered small under the NAICS Code 339112 d. Do you (offer) manufacture the product yourself or a distributor of the items being researched above?____ e. Are you an authorized distributor/reseller? Provide evidence from original equipment manufacturer (OEM). f. Do you (offer) supply a product manufactured by another domestic small business, if it is a nonmanufacturer? g. Do you (offer) supply the product of any sized manufacturer if SBA has granted a waiver to the nonmanufacturer rule? h. Is your (offer) Buy American Certificate completed in SAM? Please provide evidence with response. i. Is your (offer) Trade Agreement Certificate completed in SAM? Please provide evidence with response. j. Information for the name brand or equal product being requested, is it manufactured outside the US-Domestic non-available? k. Information for the name brand or equal product being requested, is it a foreign manufactured end product under the trade agreement? l. What is your schedule of delivery after receipt of order for the name brand or equal product? m. For the name brand or equal product required, Is your company available under any; Government Wide Agency Contract (GWAC) General Services Administration Schedules (GSA) Indefinite Delivery Indefinite Quantity (IDIQ) Blanket Purchase Agreement (BPA) If so, please list the contract number for name brand or equal product. n. Provide descriptive literature demonstrating ability to meet all of the requirement/salient characteristics listed if other than brand name product is being offered. Please provide list of contracts for commercial, federal, state, and local governments. Listed contracts shall provide communication on the government requirement illustrating the capability for comparison. to the name brand or equal product meeting the specific requirements per the draft Statement of Work. o. Contractors shall provide an estimated industry pricing for name brand product for market research and budgetary purposes. 5. Opportunity: NCO 16 is seeking information from potential contractors on their ability to provide this service. THIS IS A SOURCES SOUGHT FOR REQUEST INFORMATION (RFI) ONLY. Small Business Concerns are encouraged to provide responses to this Sources Sought in order to assist the MEDVAMC in determining potential levels of competition available in the industry. Contractors shall possess the capability to meet all requirements and objectives. 6. Instructions and Response Guidelines: Sources Sought responses are due by Nov 11, 2026, at 10:00 AM(CST) via email to rhonda.gibson2@va.gov. All Questions shall be submitted by Nov 9, 2026, at 10:00 AM (CST) via email to Rhonda.gibson2@va.gov. Telephone requests or inquires will not be accepted. Public Information will not be provided and shall be utilized to the full extent possible. This a New Requirement. The subject line shall read: 36C25627Q0134-RFI-Sources Sought- Stryker PowerPro2 Ambulance Cot System Overton Brooks Medical Center, Shreveport, LA 71101. NO SOLICITATION EXISTS AT THIS TIME. There is no page limitation on subparagraphs 5(a) - 5(o). Please provide the information you deem relevant in order to respond to the specific inquiries of the Sources Sought. Information provided will be used solely by MEDVAMC as "market research" and will not be released outside of the MEDVAMC Purchasing and Contract Team. This Sources Sought notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ), and it is not to be construed as a commitment by the Government to enter into a contract, nor will the Government pay for the information submitted in response to this request. All information contained in this Sources Sought is preliminary as well as subject to modification and is in no way binding on the Government. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the U.S. Government to form a binding contract. If a solicitation is released, it will be synopsized on Contracting Opportunities (https://beta.sam.gov/) website or GSA. It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this Sources Sought, or future RFP/RFQ. 7. Contact Information: Contract Specialist, Rhonda Gibson Email address: Rhonda.gibson2@va.gov Your responses to this notice are appreciated. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES/PROPOSALS; however, any firm that believes it can meet the requirements may provide answers, responses and give written notification prior to the response due date and time. Supporting evidence and responses must be furnished in enough detail to demonstrate the ability to perform the requirements. ***** End Word Document *******
69%
Market Research11/11/2026

Additional Details

Solicitation Number

36C24526Q0172

Archive Date

Dec 27, 2025

Office Address

LINTHICUM, MD, 21090