GovChime
Notice ID: b58e54db40e84445b0be285f1105ad7dSolicitation

9390--Supplies: Nutrition and Food Wall Covering

Archived on June 14, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM UTC−04:00
Posted
May 27, 2021
Notice type
Solicitation
NAICS
326199: All Other Plastics Product Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
248-NETWORK CONTRACT OFFICE 8 (36C248)
Place of performance
Department of Veterans Affairs Caribbean VA Healthcare Systems 10 Casia Street, San Juan, 00921
Last updated
Dec 6, 2025

Identifiers

Solicitation number
36C24821Q0985
Notice ID
b58e54db40e84445b0be285f1105ad7d

Description

The Orlando VA Healthcare System, Network Contracting Office 8, intends to solicit and award an acquisition for supplies for the San Juan VA Nutrition Renovation Wall Project in San Juan, Puerto Rico. The primary North American Industry Classification System (NAICS) 326199, with a related small business size standard of 750 employees. The action is for a Firm-Fixed Price (FFP) purchase order, which will be advertised as Unrestricted. The solicitation will be posted on or about 05/27/2021, via beta.sam.gov website. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-05, 03/10/2021. It is the responsibility of the quoter to review the web page for notice of amendments, updates or changes to the solicitation. No hard copies will be mailed. To be eligible for award, prospective quoters must be registered in the System for Award Management (SAM) internet site, www.beta.sam.gov. For further information please contact Contract Specialist Jessica Kiser, Jessica.Kiser@va.gov. ALL RESPONSES ARE DUE VIA EMAIL TO: JESSICA.KISER@VA.GOV BY JUNE 4, 2021 AT 4:00 PM EASTERN STANDARD TIME, EST. ALL QUESTIONS ARE DUE VIA EMAIL TO: JESSICA.KISER@VA.GOV BY JUNE 2, 2021 AT 12:00 PM (EST).

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Sep 30, 2021

NAICS

326199

Agency

Department of Veterans Affairs

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C24821Q0985
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationMay 27, 2021

    9390--Supplies: Nutrition and Food Wall Covering

    Notice 4cccd62285644682801ceef6a5e37c07 on SAM.gov

  2. SolicitationCurrentMay 27, 2021

    9390--Supplies: Nutrition and Food Wall Covering

    Notice b58e54db40e84445b0be285f1105ad7d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION. THIS IS FOR INFORMATION AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. The Department of Defense, United States Air Force (USAF), Air Force Materiel Command (AFMC), Air Force Test Center (AFTC), Operational Contracting Division (PZIOCD), is currently conducting market research seeking capabilities statements from potential sources, including small businesses (SB), 8(a), HUBZone, Economically Disadvantaged Woman-Owned (EDWOSB), Woman-Owned (WOSB), Service Disabled Veteran Owned (SDVOSB) small business that are capable of providing Traffic Safety Cones in support of the upcoming base Airshow at Eglin AFB, FL. SCOPE. The Contractor shall supply and deliver brand new, free-standing traffic safety cones to Eglin Air Force Base (AFB). All items must meet the following technical specifications and salient characteristics: Item Description: 28" Free-Standing Traffic Safety Cone, 7 lbs., Safety Orange, equipped with 6" and 4" High-Intensity Reflective Collars (Type IV). Quantity Required: 2,000 units Compliance: Cones must meet the Federal Highway Administration Manual on Uniform Traffic Control Devices (MUTCD) safety standards. Delivery Destination: Eglin AFB, FL 32542. Responses to this Sources Sought request should reference "Traffic Safety Cones - EGLIN AFB, FL" and shall include the following information in this format: Company name, address, point of contact, phone number, and email address. Unique Entity ID (UEI), Contractor and Government Entity (CAGE) Code, GSA contract number, if applicable. Size of business in relation to the NAICS code listed below. Capability statement displaying the contractor's ability to provide the products, to include any relevant past performance on supplying similar safety or traffic maintenance commodities in bulk within the last 5 years. Please include contract numbers, dollar value, and period of performance for each contract referenced. The Government also requests input from industry on areas of improvement for the Statement of Need (SON) or any part of this requirement. Any feedback will be reviewed and may or may not be incorporated. All interested vendors should submit a response demonstrating their capability to provide these products to the Primary Points of Contact listed below. Proposals/Quotes/Bids are not being requested or accepted at this time. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a small business set-aside is possible. As stipulated in RFO 15.101(c), responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists at this time; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government’s discretion. This notice is issued solely for information and planning purposes; it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB, or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids, or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government-wide Point of Entry (SAM.gov). It is the responsibility of potential offerors to monitor the Government-wide Point of Entry for additional information pertaining to this requirement. The NAICS code assigned to this acquisition is 326199 (All Other Plastics Product Manufacturing), with a size standard of 1,000 employees. Respondents should indicate their size in relation to these size standards and indicate socio-economic status (i.e. SB, 8(a), HUBZone, EDWOSB, WOSB, or SDVOSB). Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. No set-aside decision has been made. Any information submitted by respondents to this sources sought is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government’s assessment of the capability statements received may factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business, or any particular small business program. Small businesses with only partial capabilities of this requirement are encouraged to submit their capabilities statement demonstrating the portion of the requirement they are capable of providing. This information will allow the Government to identify areas of possible breakout or possible subcontracting opportunities. CAPABILITIES STATEMENT: All interested vendors should submit a capabilities statement that explicitly demonstrates their capability to provide the products stated in this notice. The capabilities statement should be brief and concise yet clearly demonstrate an ability to meet the stated requirement. The response must not exceed 5 pages. Responses must be submitted electronically to the following e-mail addresses: romina.snyder.2@us.af.mil and hailey.prather@us.af.mil. All correspondence sent via email should contain a subject line that reads “Response to Eglin AFB Traffic Safety Cones Sources Sought.” If this subject line is not included, the e-mail may not get through e-mail filters at Eglin AFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachment. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, or .docx documents are attached to your email. All other attachment types may be deleted. All responsible sources may submit information that will be considered by the agency. If late information is received, it may be considered, depending on agency time constraints. All routine communication regarding the announcement should be directed to the contractual points of contact listed in this posting. The Government may or may not use any responses to this sources sought as a basis for a subsequent project/requirement. Any project/requirement developed from the sources sought responses may be the subject of a subsequent acquisition; any such subsequent acquisition will be posted on SAM.gov separately. Responses to this sources sought will not be returned. The Government is under no obligation to acknowledge receipt of the information received or provide feedback to the respondents with respect to any of the information submitted under this sources sought. No requests for a bid package or solicitation will be accepted; a bid package or solicitation does not exist at this time. In order to protect the integrity of any possible future acquisition, no additional information will be provided and no appointments for presentations will be made in reference to this sources sought. Only government employees will review submitted responses to this sources sought. Respondents are advised that employees of commercial firms under contract with the Government may be used to administratively process submissions and perform other administrative duties requiring access to other contractor’s proprietary information. These administrative support contractors include nondisclosure agreements prohibiting their contractor employees from disclosing any information submitted by other contractors or using such information for any purpose other than that for which it was furnished. RESPONSES ARE DUE NO LATER THAN 4:00 P.M. (CST) ON NOVEMBER 27, 2026. Direct all questions concerning this requirement to Romina Snyder at romina.snyder.2@us.af.mil and Hailey Prather at hailey.prather@us.af.mil
-Market Research11/27/2026
Solicitation Modification 002: This amendment establishes the pre-award ship-check and field measurement requirements, clarifies the award consideration during technical evaluation, and the missing additional FAR clauses and provisions. 1. Pre-Award Ship Check and Field Measurements The Government does not possess reliable existing measurements; therefore, the performance requirement remains valid. Accordingly, offerors shall complete a ship check and conduct the necessary field measurements specified in the SOW, no later than November 16th, 2026, prior to the solicitation closing date of November 18th, 2026. This includes visually inspecting each of the twenty-four (24) target locations, verifying face-to-face dimensions, flange drilling patterns, allowable lateral/axial movement, adjacent clearances, and piping alignment necessary for off-site fabrication. Due to operational commitments and cutter availability, post-award access for obtaining measurements will not be feasible. Offerors are responsible for coordinating and completing any necessary ship check and field measurements before the established deadline to ensure their proposals are accurate and technically compliant. Requiring completion during the established availability window mitigates fabrication inaccuracies, improper fitting, schedule delays, and performance risk associated with the required delivery date of April 12, 2027. 2. Technical Evaluation and Award Eligibility Completion of the pre-award ship check and field measurements is a mandatory technical acceptability requirement. Offerors shall provide documentation of the completed site visit a technical approach, and technical capability demonstrating that their proposed offer is based on verified measurements meeting the SOW requirements. As previously stated, Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. Proposals that fail to demonstrate compliance with this requirement by the established deadline will be determined technically unacceptable and ineligible for award, regardless of price. 3. Required Delivery Date The RDD remains on or before April 12, 2027. Offerors shall demonstrate their ability to fabricate and deliver the required components within the timeframe based on the verified ship-check measurements and anticipatory delivery date. 4. Additional FAR clauses and provisions. The original solicitation mentioned additional FAR clauses and provisions that was identified as missing. These have been included in an attachment as previously stated. All other terms and conditions of the solicitation remain unchanged. The solicitation closing date and time of 18 November 2026 at 3:00 P.M. Eastern Standard Time remain unchanged. It is the responsibility of interested vendors to monitor the solicitation for any amendments, modifications, or other changes. End of Modification 002. ----------------------------------------------------------------------------------------------------------------- Solicitation Modification 001: This solicitation amendment is to address the Statement of Work file attachment. Multiple interested vendors reported not being able to review the SOW word doc file format. The SOW attachment has been uploaded under PDF file format. All other terms and conditions of the solicitation remain unchanged. The solicitation closing date and time of 18 November 2026 at 3:00 P.M. Eastern Standard Time remain unchanged. It is the responsibility of interested vendors to monitor the solicitation for any amendments, modifications, or other changes. End of Modification 001. ----------------------------------------------------------------------------------------------------------------- Availability of a site visit will be held between October 26, 2026, and November 16, 2026 . RSVP to the POC CWO Nicholas Labianca, Port Engineer, Email: Nicholas.F.Labianca@uscg.mil or Phone: (571) 608-9794, Deadline of request by November 13, 2026. This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR2700000374. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 326122. The small business size standard is 750. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER AND THE CONTRACTING PROCUREMENT OFFICE CONDUCTED BY U.S. COAST GUARD SEA-C21, REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: FLEXIBLE RUBBER PIPE COUPLINGS A. REQUIREMENT: 1. The contractor shall provide Flexible Rubber Pipe Couplings IAW SOW. See Attached SOW for full details. 1 LOT. 2.0 PERFORMANCE REQUIREMENTS 2.1 Ship Check and Field Measurements 2.1.2 Availability Window: The vessel will be available for ship check between October 23, 2026, and November 16, 2026. The Contractor shall coordinate exact site visit dates with the Engineering Officer (EO). 2.1.3 Security & Site Access: All personnel visiting the vessel shall be U.S. Citizens and must comply with base access control requirements (REAL ID or valid passport required). 2.1.4 Responsibilities: The Contractor shall visually inspect each of the twenty-four (24) target locations, verify face-to-face dimensions, flange drilling patterns, allowable lateral/axial movement, adjacent clearances, and piping alignment. *Country of Origin / Made in USA Requirement: The item offered shall be manufactured in the United States. Offerors shall identify the country of origin and provide any supporting documentation necessary for the Government to verify compliance. 2. LOCATION OF DELIVERY/PERFORMANCE (FOB Destination) USCGC RELIANCE (WMEC-615) NAS Pensacola 211 South AVE Suite G Pensacola, FL 32508. 3. REQUIRED DELIVERY: Delivery Date: On or before April 12, 2027 ** Total cost shall have delivery and any Freight charges included. ** ** SHIPPING: FOB DESTINATION REQUIRED. ** Interested Vendors shall provide product/service details, Product Data Sheet, and cost breakdown IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. Buy American Compliance: In accordance with FAR 52.225-1 Buy American Supplies and FAR 52.225-2 Buy American Certificate, the offered end product must qualify as a domestic end product. Offers that do not demonstrate compliance with the Made in USA / Buy American requirement may be determined ineligible for award. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (2) Unit Cost (3) Extended Price (4) Total Price including FOB Destination Shipping Costs (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. Quotes must be received no later than 18 NOV 2026 at 3:00 P.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Ms. Jacqueline Handley at: Jacqueline.D.Handley@uscg.mil and carbon copy to Contracting Officer, SKC Patricia Fremming at Patricia.M.Fremming@uscg.mil Any questions or concerns regarding any aspect of the RFQ must be forwarded to Ms. Jacqueline Handley at: Jacqueline.D.Handley@uscg.mil and a carbon copy to Contracting Officer, SKC Patricia Fremming at Patricia.M.Fremming@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) FAR 52.225-2, Buy American Certificate (Oct 2022) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) NOTE: In addition to the listed clauses, please review the attached FAR Clause Matrix for all clauses applicable to this requirement. *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
-Combined Synopsis11/18/2026
-AwardedOpen
SOURCES SOUGHT ANNOUNCEMENT Fleet Logistics Center Puget Sound (FLC PS) is posting a Sources Sought notice, as a means of conducting market research to identify any interested vendors for the procurement of Polyethylene/Polyurethane Parts for the USS Chief, in support of SRF-JRMC. The applicable North American Industry Classification System (NAICS) code assigned to this requirement is 326199, with a small business size standard of 750 employees. The results of this market research may contribute to future procurement process decisions. NO feedback or evaluations will be provided regarding any submission against this Sources Sought notice. Please provide responses to this announcement no later than the posted closing date. DESCRIPTION OF REQUESTED SUPPLIES: (QTY 13) YHMW 2.5" THK, UHMW POLYURETHAN, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 2-1/2"THK X 10" WIDTH X 10 FT LG, COLOR; BLACK. (QTY 6) UHMW 2.5" THK, UHMW POLYURETHAN, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 2-1/2"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 4) UHMW 3" THK, POLYETHYLENE, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 3"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 8) UHMW 4" THK, POLYETHYLENE, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 4"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 1500) UHMW PLUGS, TAPERED, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE PLUGS (TAPERED), SIZE; 1" DIA X 1/2"T, COLOR; BLACK. All responses to this Sources Sought notice should be emailed to Walid Aslan (walid.m.aslan.civ@us.navy.mil) and include the following information - Your organization name, physical address, CAGE code, email address, website, telephone number, classification (Small Business/Other Than Small) status under NAICS code 326199. **THIS IS NOT A REQUEST FOR QUOTE** - submission of any information in response to this Sources Sought notice is purely voluntary and the Government assumes no financial responsibility for any costs incurred. The results of this market research may contribute to future procurement process decisions. No feedback or evaluations will be provided to responses against this Sources Sought notice.
-Market Research11/16/2026
GENERAL INFORMATION AND STATUTORY AUTHORITY The Supervisor of Shipbuilding, Conversion, and Repair, USN, Bath, ME (SUPSHIP Bath) announces its intent to solicit, negotiate, and award a sole-source, Firm-Fixed-Price (FFP) contract to the University of Maine Orono's Advanced Structures and Composites Center (ASCC), located in Orono, ME. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Pursuant to FAR 5.102 and FAR 6.305, the redacted Justification and Approval (J&A) document approved by the Competition Advocate (Code 400) on 4 September 2026 is attached to this special notice. 2. DESCRIPTION OF REQUIREMENT AND SCOPE The Government requires the design, material validation, physical testing, and fabrication of custom-fit, weather-tight, impact-resistant, and flame-retardant temporary protective covers. These specialized covers provide heavy industrial barrier protection for the sensitive, high-value AN/SPY-6(V)1 Air and Missile Defense Radar (AMDR) array faces on designated Flight III Guided-Missile Destroyer (DDG) platforms during active shipyard construction, outfitting, and pier-side integration. The anticipated scope of work comprises: Base Requirement (CLINs 0001 - 0004): Design review and engineering, material formulation and drop validation testing, and additive manufacturing delivery of one (1) initial shipset of four (4) customized temporary protective covers, including complete technical data deliverables under Government Purpose Rights (GPR). Support Services (CLIN 0005): Firm-Fixed-Price post-manufacturing support package consisting of pre-priced engineering hours for shipyard rigging coordination and fit-checks (SLIN 0005AA) and pre-priced field patch and repair material kits (SLIN 0005AB). Option Quantities (CLINs 0006 & 0007): Pre-priced contract options for up to two (2) additional replication shipsets of four (4) covers each (totaling eight (8) option covers) to support subsequent Flight III hull outfitting schedules. The total estimated value across the base requirement and all options is under $2,000,000, funded utilizing SCIB funding. 3. SOLE SOURCE JUSTIFICATION AND CONTRACTOR QUALIFICATIONS Detailed in the attached redacted Justification and Approval. 4. SUBMISSION OF CAPABILITY STATEMENTS THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. A solicitation will not be posted publicly. However, all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. Interested parties must demonstrate in writing their existing, certified capability to meet the Government's technical and schedule requirements without causing unacceptable delays to ongoing naval construction. Submissions must include: Detailed evidence of an existing, fully operational large-scale additive manufacturing gantry system capable of printing a single-piece or modular thermoplastic enclosure matching the physical envelope of the AN/SPY-6(V)1 radar array foundations. Demonstrated technical capability to compound, print, and certify composite materials. Demonstrated ability to ingest shipbuilder 3D CAD parametric solid models directly into machine-ready additive instructions without requiring external mold tooling, and delivery of initial shipset articles. Company name, CAGE code, Unique Entity Identifier (UEI), business size classification under NAICS 326199, and primary technical point of contact. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement in the future.
-Special Notice12/12/2026

Additional Details

Solicitation Number

36C24821Q0985

Archive Date

Jun 14, 2021

Office Address

TAMPA, FL, 33637