Notice ID: e27777c911a141a9b55ebbf35adc3310Combined Synopsis/SolicitationArchived
6530-- Stryker Hospital Beds 5 South
Archived on December 31, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM EST
- Posted
- November 18, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Service-Disabled Veteran-Owned Small Business Set Aside
- NAICS
- 339113: Surgical Appliance and Supplies Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Office
- 248-NETWORK CONTRACT OFFICE 8 (36C248)
- Place of performance
- James A. Haley Veterans Hospital 13000 Bruce B. Downs Blvd, Tampa, FL, 33612
- Last updated
- Nov 6, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 36C24826Q0093
- Notice ID
- e27777c911a141a9b55ebbf35adc3310
Description
STATEMENT OF NEED Stryker ProCuity LEX Hospital Beds GENERAL: James A. Haley Veterans Hospital (JAHVH) located at 13000 Bruce B. Downs Blvd, Tampa, FL 33612, has a requirement for Stryker ProCuity LEX Hospital Beds to activate the new 5 South unit in the Acute Care Service. BACKGROUND: James A. Haley VA Nursing Acute Care requires the acquisition of Stryker ProCuity LEX hospital beds to activate the new 5 South unit. The new unit will comprise of 13 private rooms providing patient privacy, better infection control, enhanced comfort and recovery, improved patient experience, and positive health outcomes. These beds are already being used in the Polytrauma service. The beds are designed with numerous safety features such as low-height settings (11.5 inches) to reduce the risk of falls, integrated bed exit alarms, and advanced braking systems. They help ensure that patients are less likely to experience injuries as a result of the fall from a bed. PURPOSE: The Acute Care Service requires Stryker ProCuity LEX Hospital Beds to activate the new 5 South unit. SCOPE: Vendor shall provide Stryker ProCuity LEX Hospital bed. The vendor shall provide white glove delivery. Installation and assembly and complete set-up will be included. The equipment feature is essential to the technical requirements to meet the needs of the Government.
Award Overview
Possible prior contract
Inferred, not confirmedInferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.
Vendor
INTERIOR FUSION LLCContract end date
Aug 31, 2024
NAICS
339113
Agency
Department of Veterans Affairs
Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.
Contacts
Contracting Officer
Primary Contact
Documents
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
6530-- Stryker Hospital Beds 5 South
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
UltraScan Versa Premier Tables | 67% | Combined Synopsis | 09/27/2026 |
1. Title: Stryker PowerPro2 Ambulance Cot System 2. Purpose: The Network Contracting Office (NCO) 16 located at 5075 Westheimer Road, Galleria Financial Center, Suite 750, Houston, Texas, hereby issues the following Sources Sought to Request Information (RFI) with the intent of determining the contractor interest, capabilities, qualifications of potential businesses, nonmanufacturer rule compliance, Buy American Act compliance, Trade Agreement compliance and estimated industry pricing information for market research and estimated budgetary purpose for Stryker PowerPro2 Ambulance Cot System. Contractor shall provide all shipping, installation (if required), equipment, personnel, labor and testing for name brand. This Sources Sought is published for market research purposes. This Sources Sought will be used to determine if a set-aside for any small business program is appropriate. Government anticipates competitive, firm fixed price contract. Please review this announcement, respond to questions below and review all attachments in their entirety. Government requests that interested offerors complete all questions below, provide required documentation, descriptive literature and authorization letter as described below. The Government is in no way obligated to do business with or to enter into any form of contract with any person, firm or other entity that receives or responds to this announcement. a. Contractors shall provide their point(s) of contact name, address, telephone number, and email address, and the company's business size, and SAM Unique Entity Identification Number. b. Is your company a small business, SDBs, HUBZone, or 8A concern? Please provide proof of qualifications. b. Does your company meet all required four prong factors for the Nonmanufacturer Rule (NMR) per guidance of SBA and 13 C.F.R. § 121.406 Offer must answer all questions below. 1. Does your company exceed the 1250 employee alternative size standard for nonmanufacturers? ___ 2. Is your company primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied? __________ 3. Does your company must take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice? __________ 4. Does your company supply the end products of a small business manufacturer or processor made in the United States? _____________ c. Is your company considered small under the NAICS Code 339112 d. Do you (offer) manufacture the product yourself or a distributor of the items being researched above?____ e. Are you an authorized distributor/reseller? Provide evidence from original equipment manufacturer (OEM). f. Do you (offer) supply a product manufactured by another domestic small business, if it is a nonmanufacturer? g. Do you (offer) supply the product of any sized manufacturer if SBA has granted a waiver to the nonmanufacturer rule? h. Is your (offer) Buy American Certificate completed in SAM? Please provide evidence with response. i. Is your (offer) Trade Agreement Certificate completed in SAM? Please provide evidence with response. j. Information for the name brand or equal product being requested, is it manufactured outside the US-Domestic non-available? k. Information for the name brand or equal product being requested, is it a foreign manufactured end product under the trade agreement? l. What is your schedule of delivery after receipt of order for the name brand or equal product? m. For the name brand or equal product required, Is your company available under any; Government Wide Agency Contract (GWAC) General Services Administration Schedules (GSA) Indefinite Delivery Indefinite Quantity (IDIQ) Blanket Purchase Agreement (BPA) If so, please list the contract number for name brand or equal product. n. Provide descriptive literature demonstrating ability to meet all of the requirement/salient characteristics listed if other than brand name product is being offered. Please provide list of contracts for commercial, federal, state, and local governments. Listed contracts shall provide communication on the government requirement illustrating the capability for comparison. to the name brand or equal product meeting the specific requirements per the draft Statement of Work. o. Contractors shall provide an estimated industry pricing for name brand product for market research and budgetary purposes. 5. Opportunity: NCO 16 is seeking information from potential contractors on their ability to provide this service. THIS IS A SOURCES SOUGHT FOR REQUEST INFORMATION (RFI) ONLY. Small Business Concerns are encouraged to provide responses to this Sources Sought in order to assist the MEDVAMC in determining potential levels of competition available in the industry. Contractors shall possess the capability to meet all requirements and objectives. 6. Instructions and Response Guidelines: Sources Sought responses are due by Nov 11, 2026, at 10:00 AM(CST) via email to rhonda.gibson2@va.gov. All Questions shall be submitted by Nov 9, 2026, at 10:00 AM (CST) via email to Rhonda.gibson2@va.gov. Telephone requests or inquires will not be accepted. Public Information will not be provided and shall be utilized to the full extent possible. This a New Requirement. The subject line shall read: 36C25627Q0134-RFI-Sources Sought- Stryker PowerPro2 Ambulance Cot System Overton Brooks Medical Center, Shreveport, LA 71101. NO SOLICITATION EXISTS AT THIS TIME. There is no page limitation on subparagraphs 5(a) - 5(o). Please provide the information you deem relevant in order to respond to the specific inquiries of the Sources Sought. Information provided will be used solely by MEDVAMC as "market research" and will not be released outside of the MEDVAMC Purchasing and Contract Team. This Sources Sought notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ), and it is not to be construed as a commitment by the Government to enter into a contract, nor will the Government pay for the information submitted in response to this request. All information contained in this Sources Sought is preliminary as well as subject to modification and is in no way binding on the Government. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the U.S. Government to form a binding contract. If a solicitation is released, it will be synopsized on Contracting Opportunities (https://beta.sam.gov/) website or GSA. It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this Sources Sought, or future RFP/RFQ. 7. Contact Information: Contract Specialist, Rhonda Gibson Email address: Rhonda.gibson2@va.gov Your responses to this notice are appreciated. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES/PROPOSALS; however, any firm that believes it can meet the requirements may provide answers, responses and give written notification prior to the response due date and time. Supporting evidence and responses must be furnished in enough detail to demonstrate the ability to perform the requirements. ***** End Word Document ******* | 63% | Market Research | 11/11/2026 |
63% | Awarded | Open | |
THIS IS A SOURCES SOUGHT NOTICE ONLY: This announcement seeks information from the industry, which will be used for preliminary planning purposes for procurement. No proposals are being requested or accepted with this synopsis. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. THIS IS STRICTLY MARKET RESEARCH. Patient safety lifts The purpose of this synopsis is to gain knowledge of interest, capabilities, and qualifications of various members of industry, who have the capability to provide Patient safety lifts. All interested firms must be registered in SAM (System for Award Management) to be eligible for the award of Government contracts. Interested parties responding to this Sources Sought request shall submit the following information at a minimum: (1) Company name and address point of contact with phone number and SAM UEI. (2) Documentation relating to performance capability, current point of contact, and phone number). (3) Socio-economic status to identify the business class as a large business, SDVOSB, VOSB, small business, Woman Owned, etc. (4) Place of manufacture (5) Any other pertinent company documentation prior to submission of offers to a solicitation. Any SD/VOSB firms responding to this Sources Sought Notice must also provide proof of registration in the SBA Vet Cert prior to submitting offers to a solicitation. This market research is for informational and planning purposes. This is not a solicitation and does not obligate the Government to issue a solicitation. Please be advised that the government will not pay any costs for responses and information submitted. All submissions are acceptable via email to kurt.fritz@va.gov RESULTS INFORMATION: Respondents will not be notified of the results, and it is at the discretion of the Government to utilize results. Firms responding to this Sources Sought announcement, who fail to meet all requirements as stated above, and who fail to provide ALL the required information requested, will not be used to help the Government make the acquisition decision, which is the intent of this sources sought announcement. Salient characteristics (QTY 21) Patient Safety Lifts All ceiling mounted hoists, rails, and components must comply with ISO 10535:2021 xy Systems Must be able to be flush mounted to a structural ceiling, integrated Into Suspended (Drop) Ceilings, or wall mounted. Cover 5m X 10m area with trainer (QTY 1) Cover 4m X 4m area (QTY 9) Cover 4m x 3m area (QTY 2) Cover 3m x 3m area (QTY 1) Linear Tracks Must be able to be flush mounted to a structural ceiling, integrated Into Suspended (Drop) Ceilings, or wall mounted. 3m Linear Track (QTY 3) Must be made from Aluminum 6063 T6 or better. Must have an anodized surface finish or better. Must support up to 550 lbs. or better 4m Linear Track (QTY 4) Must be made from Aluminum 6063 T6 or better. Must have an anodized surface finish or better. Must support up 825 lbs. or better 6m Linear Track (QTY 1) Must be made from Aluminum 6063 T6 or better. Must have an anodized surface finish or better. Must support up to 550 lbs. or better Patient Lift Supports minimum 550 lbs. (QTY 17) Motor Speed: 60 millimeters every second or better. Horizontal Motor Option: Can include a motorized horizontal traverse along the ceiling rail, operated via hand control or IR remote. Digital System Integration: Supports Wi Fi connectivity for usage monitoring, service alerts, and data logging through a centralized digital platform. Safety Features: Includes mechanical and electrical emergency lowering, emergency stop, and overload protection. Manual Position Locks. Operating Noise: 50 to 60 dB(A). Battery System: Uses 24 V NiMH batteries with automatic activation, soft start/stop, and charge times of about 2 hours (for this capacity class). Main body dimensions: 580 mm × 345 mm × 156 mm. Impact resistant. Flame retardant housing. Continuous In-Rail Charging. LCD screen capable of displaying patient weight and lift usage information. Patient Lift Supports minimum 825 lbs. (QTY 4) Motor Speed: 60 millimeters every second or better. Horizontal Motor Option: Can include a motorized horizontal traverse along the ceiling rail, operated via hand control or IR remote. Digital System Integration: Supports Wi Fi connectivity for usage monitoring, service alerts, and data logging through a centralized digital platform. Safety Features: Includes mechanical and electrical emergency lowering, emergency stop, and overload protection. Manual Position Locks. Operating Noise: 50 to 60 dB(A). Battery System: dual 24 V NiMH batteries with automatic activation, soft start/stop, and charge times of about 4 hours or better Main body dimensions: 580 mm × 345 mm × 156 mm. Impact resistant. Flame retardant housing. Continuous In-Rail Charging. LCD screen capable of displaying patient weight and lift usage information. Medium Hanger Bar (QTY 21) Lifts up to 825 lbs. Four attachment points for a safe, stable, and comfortable lift. Works with ceiling and mobile lifts and fits standard slings. Strong, rust resistant metal covered with soft, easy to clean foam. Lightweight (4 lbs.) and easy to handle. Medium size (~24 wide) Trainer Module Motor (QTY 1) Reducing bodyweight, relieves up to 100 kg (220 lbs.), Built into the ceiling hoist added to system, controlled via the hand control interface. Safe exercise sessions: positioning lock and fall protection, enabling standing exercises, squats, steps, balance training, and sit-to-stand movements. 30-minute training limit: each session lasts up to 30 minutes per full battery charge, with clear indicators for weight relief and remaining time. After session, will automatically resume normal lift mode. Battery management: 1 hour of charge delivers about 10 minutes of training time. When training ends, it reverts to standard lifting and resumes charging. Installation (QTY 21) Install lift systems in 21 rooms. Labor and the hardware necessary to install the lift systems. Must support up to Level II that is identified in the Infection Control Risk Assessment (ICRA). Perform weight testing and certification of the installed lift systems. Removal of 18 existing lift systems. Design / Drafting (QTY 1) Stamped Engineering Calculations Slings (QTY 84) Support 450 lbs. or better Made from polypropylene material Disposable Limb Sling (QTY 1 per system) Disposable Basic High sling (QTY 1 per system) Disposable Twin Turner (QTY 1 per system) Disposable Repositioning Sling (QTY 1 per system) User Training (QTY 1) | 63% | Market Research | 09/10/2026 |
This amendment incorporates GSAM Clause 552.238-120 Economic Price Adjustment – Federal Supply Schedule Contracts (Tailored) (Sep 2024), updates Responsibility Evaluation dated October 2025, and updates the Signature Authority form dated August 2025. | 63% | Combined Synopsis | 03/26/2023 |
Additional Details
Solicitation Number
36C24826Q0093
Archive Date
Dec 31, 2025
Office Address
TAMPA, FL, 33637