Notice ID: 2a752416b9684ef1ab6569f2e76e52bdSpecial Notice
5660--Notice of Intent to Sole Source Two TechGate Auto MRI Door Protection Systems 36C249-20-AP-2488 - LOCKING DEVICE ACCESS TECH-GATE2
Archived on July 1, 2020. Full description on SAM.gov.
Overview
- Posted
- June 16, 2020
- Notice type
- Special Notice
Notice details
- Office
- 249-NETWORK CONTRACT OFFICE 9 (36C249)
- Last updated
- Dec 6, 2025
Identifiers
- Solicitation number
- 36C24920Q0267
- Notice ID
- 2a752416b9684ef1ab6569f2e76e52bd
Description
The Department of Veterans Affairs, Network Contracting Office 09, hereby provides notice of its intent to award a sole source, firm fixed contract to Aegys LLC., 5313 Poplar Glen CT, Plainfield, IL 60586-6620. The contract is expected to be awarded under the authority of 41 U.S.C. 3304(a)(1), as implemented by FAR 13.106-1(b) Soliciting from a Single Source. A Justification for Single Source Awards for Other Than Full and Open Competition has been prepared. The anticipated award date is June 29, 2020. The contractor will provide two TechGate Auto MRI Doorway Protection Systems, miscellaneous hardware, remote controlled transmitters, infrared sensors, shipping, installation and a training program to staff after installation is complete. The TechGate is an automatically deployed safety barrier with LED lights and warning signage to prevent unscreened access to MRI suites. The proprietary hinged break-away arm allows for rapid access in the event of an emergency. The device is automatic requiring no manual operations of chains and belts. The versatility of the LED warning message allows multiple message to be conveyed such as: MRI no longer operating, being serviced, repaired or the room is being cleaned. The flashing Magnet is Always On signage on the TechGate while the barrier is down, communicates the increased risk while chain and belts offer no warning when not engaged. These services will be performed at the Memphis VA Medical Center, 1030 Jefferson Avenue, Memphis, TN 38104. NAICS code: 339950 Sign Manufacturing (SBA Size Standard 500 Employees) PSC: 5660 Fencing, Fences, Gates and Components THIS NOTICE OF INTENT IS NOT A SOLICITATION OR REQUEST FOR COMPETITIVE QUOTES. However, interested parties may identify their interest and capability to respond to this requirement within five calendar days after publication of this notice. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government. Information received will normally be considered solely for determining whether to conduct a competitive procurement. The Department of Veterans Affairs will NOT be responsible for any costs incurred by interested parties in responding to this notice of intent. Only written responses will be considered. All responses from responsible sources will be fully considered. As a result of analyzing responses to this notice of intent, the Government shall determine if a solicitation will be issued. Any prospective contractor must be registered in the System for Award Management (SAM) to be eligible for award. Interested parties are encouraged to furnish information by email only with RESPONSE TO INTENT TO SOLE SOURCE 36C24920Q0267 in the subject line. All documents submitted will not be returned. All interested parties shall submit clear and convincing documentation demonstrating their capabilities to satisfy the requirements listed above to Jennifer Harper, Contract Specialist, by email at Jennifer.Harper2@va.gov NO LATER THAN June 19, 2020 @ 4:00PM CST. The capability documentation should include general information and technical background describing in detail the prospective contractor's capabilities and experience that will demonstrate the ability to support these requirements.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
36C24920Q0267- Special NoticeCurrentJun 16, 2020
5660--Notice of Intent to Sole Source Two TechGate Auto MRI Door Protection Systems 36C249-20-AP-2488 - LOCKING DEVICE ACCESS TECH-GATE2
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amended to include set aside code and change NAICS. Fence Supplies | 46% | Combined Synopsis | 07/30/2026 |
Astro turf | 46% | Combined Synopsis | 03/17/2026 |
Amended to change NAICS Diamond Quality Door .70 EK706 1 meter x 2.12 meter, color black:Tech Specs: 100% Steel Solar Protection Paint 52kg Steel Frame 4 Reinforced Steel Hinges;Hidden with 5 screws Single Key mechanism for total security lockdown Insulated material and counter acustic interior 20 Security bolts 7 Keys 100% steel with coded security | 42% | Combined Synopsis | 07/31/2026 |
The purpose of this Sources Sought is to conduct market research to identify companies capable of providing installation services of a cable rail fence system for the Department of Veterans Affairs, Network Contracting Office (NCO) 21, on behalf of VA Southern Nevada Health Care System. (1) The Government does not intend to award a contract based on this Sources Sought Notice or to otherwise pay for the information solicited. (2) Although “proposal,” “offeror,” “contractor,” and “offeror” may be used in this source sought notice, any response will be treated as information only. It shall not be used as a proposal. (3) The purpose of this sources sought is to conduct market research to support the procurement of providing installation services of a Cable Rail Fence System for the VA Southern Nevada Health Care System at 6900 N Pecos Rd, North Las Vegas, NV 89086. This notice serves to survey the market to ascertain whether or not sources are capable of providing the requested installation services of cable rail fence system. This notice allows potential contractors/vendors to submit a non-binding statement of interest and documentation demonstrating their capability. The sources sought effort is intended to assess industry capabilities and develop/support the intended direction of acquisition planning. The Network Contracting Office (NCO 21) is requesting responses from qualified business concerns: the qualifying NAICS code for this effort is 238990 All Other Specialty Trade Contractors and Size Standard of $19M. 4) This source sought notice to gain knowledge of potential qualified sources and their size classifications (Service Disabled/Veteran Owned Small Business (SDVOSB/VOSB), Hub zone, 8(a), small, small disadvantaged, woman-owned small business, or large business) relative to NAICS 238990. Responses to this notice will be used by the Government to make appropriate acquisition decisions. After a review of the responses to this notice, a solicitation announcement may be published. Responses to this notice are not considered adequate responses to any corresponding solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this notice. (5) Any information received from a contractor in response to this Sources Sought Notice may be used in creating a solicitation. Any information received that is marked with a statement, such as “proprietary” or “confidential,” intended to restrict distribution will not be distributed outside of the Government, except as required by law. Scope of Statement of Work (SOW) 1. GENERAL 1.1 Title: Installation of Government-Furnished Cable Rail Fence, Approximately 250 Linear Feet 1.2 Background: The Department of Veterans Affairs (VA) requires installation of a cable rail fence system at North Las Vegas Medical Center. All fence materials (posts, cable, hardware, fittings) have been procured and are on-site/in VA storage. This SOW covers labor, equipment, and incidental materials required to install the Government-furnished fence system only. 1.3 Location: The area is in front of building 5 along the parking lot sidewalk. A site walk is recommended prior to quote/proposal submission. 1.4 Period of Performance: Estimated duration: 15 work days. 1.5 Work Hours: Normal VA business hours are [0700–1630], Monday–Friday, excluding federal holidays, unless otherwise coordinated with the VA COR/Facility Engineer. Work in active patient care, parking, or pedestrian areas may require after-hours scheduling — to be confirmed at the site visit. 2. SCOPE OF WORK The Contractor shall furnish all labor, tools, equipment, consumables, and supervision necessary to install approximately 250 linear feet of cable rail fencing, Government-furnished, including: Site layout and staking of fence line per VA-approved drawing/marked layout. Excavation and setting of fence posts (line posts, corner posts, end posts, gate posts if applicable) to manufacturer specification and depth. Setting posts in concrete footings per manufacturer's installation instructions (concrete to be furnished by Contractor unless otherwise noted — confirm in RFQ). Installation of horizontal cable rail infill, including tensioning hardware, turnbuckles, and fittings per manufacturer specifications. Final tensioning, alignment, and plumb/level check of all posts and rails. Site cleanup, removal of excavation spoils, and disposal of packaging/debris (GFM packaging return to VA if required). Restoration of disturbed turf/landscaping/pavement to pre-existing condition or better. Out of Scope: Procurement of fence material, design/engineering of fence layout. electrical/grounding work. 3. GOVERNMENT-FURNISHED MATERIAL (GFM) Item Furnished By Notes Cable rail posts (line, corner, end) VA On-site / in storage on site Cable rail, fittings, turnbuckles, hardware VA Quantity to match 250 LF run Concrete for footings Contractor Unless otherwise specified Fasteners/consumables beyond kit contents Contractor Contractor is responsible for proper handling, staging, and security of GFM once received, and shall report any shortage, damage, or non-conforming material to the COR immediately upon receipt/inspection. Contractor shall return unused GFM to the VA POC upon completion. 4. APPLICABLE CODES, STANDARDS & VA REQUIREMENTS Note: Verify current edition/revision of all codes and standards against the official source prior to execution, as these are subject to periodic update. Manufacturer's published installation instructions for the specific cable rail system (governs post spacing, embedment depth, cable tension specs). OSHA 29 CFR 1926 – Excavation (Subpart P) if post holes exceed 5 ft depth or trenching is involved; general construction safety. ADA/ABA Accessibility Guidelines – if fence is adjacent to an accessible route, confirm no encroachment on required clear width. Local building code / VA Master Specification Section for site fencing, if a controlling spec exists at this facility (check with VA Facility Engineer/COR). VA Directive/Handbook requirements for construction/renovation activities on VA property, including ICRA and ILSM screening (below). 5. SAFETY & RISK CONSIDERATIONS (Flagged Items) Underground Utility Locate (Dig Permit): Mandatory call to 811/One-Call and completion of a VA Excavation/Dig Permit prior to any post hole excavation, regardless of depth. Contractor shall not break ground until utility clearance and VA permit are obtained. Excavation Safety: If any post holes exceed 5 feet in depth or trenching is required for cable runs, OSHA Subpart P (protective systems, competent person designation) applies. ICRA (Infection Control Risk Assessment): Required if work occurs near or has potential dust/vibration impact on patient care areas. Coordinate with VA Infection Control prior to mobilization. ILSM (Interim Life Safety Measures): Required if the work affects a means of egress, fire lane, or life safety system access — confirm fence location does not obstruct emergency egress routes or fire department access. PPE: Standard PPE (hard hat, safety glasses, gloves, high-visibility vest) required; steel-toe footwear if heavy posts/equipment are being handled. Cable Tensioning Hazard: Cable rail tensioning under load presents a whip/recoil hazard — Contractor shall follow manufacturer tensioning procedure and keep personnel clear of load path during final tensioning. Traffic/Pedestrian Control: If work is near parking areas, roadways, or pedestrian paths, Contractor shall provide barricades, cones, and signage per MUTCD as applicable. Concrete Work: Standard PPE for concrete handling (eye/skin protection); confirm disposal method for excess concrete/spoils. 6. SUBMITTALS Prior to start of work, Contractor shall submit for VA COR approval: Certificate of Insurance Site-specific safety plan / Job Hazard Analysis (JHA) Schedule of work / proposed sequencing Manufacturer's installation instructions for the cable rail product (for VA record) 7. QUALITY ASSURANCE / ACCEPTANCE CRITERIA All posts plumb within manufacturer tolerance (typically ±1/4" over post height — verify against spec). Cable rails tensioned to manufacturer specification, no visible sag. Post spacing consistent with layout drawing and manufacturer maximum span. Concrete footings cured per manufacturer minimum time before load/tensioning. Site restored to pre-work condition (turf, pavement patch, debris removal). Final walkthrough and sign-off with VA COR/Facility Engineer required for acceptance. 8. DELIVERABLES Fully installed, tensioned, and inspected cable rail fence, 250 LF (approx.), per manufacturer spec and VA-approved layout. Site restoration complete. Closeout documentation: as-built notes (if layout deviated from plan), warranty information (labor), and return of unused GFM/packaging. PLEASE INDICATE WHETHER YOU HOLD A GSA FEDERAL SUPPLY SCHEDULE CONTRACT THAT COVERS THESE SERVICES AND, IF SO, THE CONTRACT NUMBER. PROVIDE BUSINESS SIZE AND SOCIO-ECONOMIC STATUS. ALSO, PLEASE BE SURE TO INDICATE PLACE OF MANUFACTURE IN YOUR RESPONSE. (a) Company name, Address, Point of Contact (POC) name, email address, and phone number (b) Indicate whether your business is large or small. (c) Indicate if your firm is a certified Service-Disabled Veteran Owned Small Business (SDVOSB) or Veteran Owned Small Business (VOSB). (d) Include the Unique Entity Identifier (UEI) number of your firm. (e) State whether your firm is registered with the System for Award Management (SAM) at http://www.sam.gov and/or the VetCert Registry at Veteran Small Business Certification (sba.gov). If not, please NOTE that any future solicitation could only be awarded to a contractor who is registered in SAM, and to receive the award based on VOSB or SDVOSB status you must be registered in the VetCert Registry. (f) Provide current commercial pricing for all items listed in the attached salient characteristics and any applicable discounts. (g) Link to the respondent’s General Services Administration (GSA) schedule, or attached file of same, if applicable. (h) Capabilities Statement (i) Place of manufacturing (this includes leased equipment of where they are manufactured) (j) Authorized Distributorship letter issued from the manufacturer (if applicable) (k) Citation of any current or past customers (i.e., within the past two (2) years) to include contract number, point of contact telephone number, or e-mail address; and The response is due no later than 3:00 PM Pacific Standard Time on November 04, 2026 2026. Please submit e-mail responses to Victoria Torres, Contract Specialist, at victoria.torres@va.gov. Please place “Sources Sought Installation Services of a Cable Rail Fence System” in the subject line of the email. Your response should include a Company POC, CAPABILITIES STATEMENT, GSA SCHEDULE INFORMATION, UEI#, BUSINESS SIZE, AND SOCIO-ECONOMIC STATUS information as explained above. This notice is to assist the VA in determining sources only. NOTES: Issuance of this notice does not constitute any obligation whatsoever on the part of the Government to procure these services, or to issue a solicitation, nor to notify respondents of the results of this notice. No solicitation documents exist at this time; however, in the event, that the acquisition strategy demonstrates that GSA is a viable option for procuring a solution, the RFQ shall be posted to GSA eBuy where only those firms who currently hold a GSA Schedule with the applicable SIN will be able to respond. The Department of Veterans Affairs is neither seeking quotes nor accepting unsolicited quotes, and responses to this notice cannot be accepted as offers. Any information the vendor considers proprietary should be marked as such. The U.S. Government will not pay for any information or administrative costs incurred in response to this Sources Sought Notice. | 41% | Market Research | 11/04/2026 |
2 Sources Sought Notice (Request for Information) Interior Directional Signage Corporal Michael J. Crescenz Department of Veterans Affairs Medical Center Purpose The Department of Veterans Affairs (VA) is conducting market research to identify capable and interested sources for Interior Directional Signage at the Corporal Michael J. Crescenz VA Medical Center (CMCVAMC). This notice is issued for informational and planning purposes only and does not constitute a solicitation or a request for proposals. Response Instructions Telephone responses will not be accepted. Responses must be received via email to Contracting Officer Benjamin Villasenor at benjamin.villasenor@va.gov no later than 4:00 PM Eastern Time on Monday, November 12, 2026. Use the subject line "RFI Response Interior Directional Signage CMCVAMC [ Your company Name]." Vendor Questionnaire Please indicate the size status and representations of your business (e.g., Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman-Owned Small Business (WOSB), Small Business, Large Business). Is the required equipment available on a Federal Supply Schedule (FSS) or Government-Wide Acquisition Contract (GWAC)? If so, include the schedule or contract number. Are you the manufacturer, a distributor/reseller, or proposing an equivalent solution to the items referenced? If not the manufacturer, provide the information requested below to confirm compliance with the Nonmanufacturer Rule (see 13 CFR 121.406(b)). Nonmanufacturer Rule Compliance Attestation (13 CFR 121.406):** If you are not the manufacturer, affirm whether you comply with the Nonmanufacturer Rule. Your attestation must address employee count ( 500), nature of business (primarily engaged in retail/wholesale trade selling the type of item), ownership/possession consistent with industry practice, and whether the product supplied is manufactured by a small business (or identify an applicable SBA waiver). Does your company have more than 500 employees? Is your company primarily engaged in the retail or wholesale trade, and does it normally sell the type of item being supplied? Will your company take ownership or possession of the items with its own personnel, equipment, or facilities, in a manner consistent with industry practice? Will the items you provide be made by a small business manufacturer? If so, identify that manufacturer. If your company is a large business, do you have authorized small business distributors? If so, provide each one's company name, phone number, point of contact, and size status, if available. If you are an authorized distributor or reseller of the items, do you alter, assemble, or modify them in any way? If yes, describe what is altered, assembled, or modified, and how. Are the items you would supply manufactured in the United States? Identify the country of origin for each item. Please submit your capabilities with respect to the salient characteristics (see Attachment A) and any information pertaining to product to establish capabilities for planning purposes. Review the salient characteristics/Statement of Need (Attachment A) and provide feedback or suggestions. If none, reply N/A. Provide your UEI number. Important Notices and Disclaimers This Request for Information (RFI) will be conducted in accordance with FAR Part 12. This notice is solely to help the VA determine available potential sources. Do not contact VA Medical Center staff regarding this requirement; they are not authorized to discuss matters related to this procurement action. All firms responding are advised that their response is not an offer and will not be considered for a contract award. If a solicitation is issued, it will be posted on SAM.gov, and interested parties must respond to the solicitation to be considered for award. This notice does not commit the Government to contract for any supplies or services. The Government will not pay for any information or administrative costs incurred in response to this RFI. Information will only be accepted in writing via email. DISCLAIMER: This RFI is issued solely for informational and planning purposes and does not constitute a solicitation. Information marked as proprietary will be handled accordingly. Responses cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. | 41% | Market Research | 11/12/2026 |
Additional Details
Solicitation Number
36C24920Q0267
Archive Date
Jul 1, 2020
Office Address
MURFREESBORO, TN, 37129