Notice ID: 9634e741c72542379d032a3ab06db501Sources Sought
6515--541-26-3-250-0366 - CABLES TO GO
Archived on November 2, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM EDT
- Posted
- September 1, 2026
- Notice type
- Sources Sought
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 335921: Fiber Optic Cable Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Office
- 250-NETWORK CONTRACT OFFICE 10 (36C250)
- Place of performance
- VAMC CLEVELAND 10701 EAST BLVD., CLEVELAND, Ohio, 44106
- Last updated
- Nov 2, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 36C25026Q0967
- Notice ID
- 9634e741c72542379d032a3ab06db501
Description
SOURCES SOUGHT NOTICE THIS REQUEST FOR INFORMATION (RFI/Sources Sought) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 10.002(b)(2), FAR 12.101, FAR 12.103 & FAR 12.202(a). DISCLAIMER This request for information, sources sought (RFI/Sources Sought) is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 10.002(b)(2), FAR 12.101, FAR 12.103 & FAR 12.202(a), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. This is NOT a solicitation announcement. This is a sources sought/RFI only. The purpose of this sources sought/RFI is to gain knowledge of potential qualified Small Businesses under NAICS 332510, (Hardware Manufacturing), but does not exclude others from responding. Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought, a solicitation announcement may be published. Responses to this source sought synopsis are not considered adequate responses for a solicitation announcement. SOURCES SOUGHT DESCRIPTION The Department of Veterans Affairs, Network Contracting Office 10, Louis Stokes Cleveland VA Medical Center, is seeking sources that can provide a Cables To Go for Clinical Care that meets the following: PART NUMBER DESCRIPTION QUANTITY/UNIT CAB39878 CABLES TO GO 1 EA CHIPAC810 CHIEF CHIPAC810 1 EA CRECENSWPOE26 CRESTRON CRECENSWPOE26 1 EA INOSHARE2 1 EA MIDCBSERK25 Middle Atlantic Caster Base for 25 Inch Deep ERK Series 1 EA MIDERK3525 35 RU ERK Series Rack 1 EA MIDERKRR35 MIDDLE ATLANTIC RACK RAIL 1 EA MIDLVFD35 MIDDLE ATLANTIC MIDLVFD35 1 EA MIDMW10FTFC MIDDLE ATLANTIC MIDMW10FTFC 1 EA MIDUTR1 MIDDLE ATLANTIC MIDUTR1 3 EA RDLTXJ3 RADIO DESIGN LABS 1 EA SHUQLXD1H50 SHUQLXD1H50 2 EA SHUQLXD2SM58H50 SHUQLXD2SM58H50 2 EA SHUQLXD4H50 SHUQLXD4H50 2 EA SHUSB900C SHUSB900C 4 EA SHUUA221 SHUUA221 1 EA SHUUA834WB SHUUA834WB 2 EA SHUUA850 SHUUA850 2 EA SHUUABIASTUS SHUUABIASTUS 2 EA SHUWL184MBSTQG SHUWL184MBSTQG 2 EA VAD5352000206 VADDIO INC VAD5352000206 1 EA VAD99999600100W VADDIO INC VAD99999600100W 2 EA Install Materials Install Materials 1 EA Labor and Integration Labor and Integration 1 EA CONTRACT TITLE: Audio-Visual System Upgrade CARES B Conference Room 3. BACKGROUND The VA Northeast Ohio Healthcare System (VANEOHS), External Affairs Service, requires a comprehensive upgrade to the CARES B Conference Room Audio-Visual (AV) system to replace outdated and unsupported equipment with a modern, fully integrated conferencing solution. The existing system no longer meets operational needs due to limitations in audio quality, video performance, system reliability, and compatibility with current collaboration platforms. These deficiencies negatively impact communication, reduce meeting efficiency, and increase reliance on technical support. This project will modernize the space into a fully functional hybrid collaboration environment, capable of supporting both in-person and remote participants through seamless Microsoft Teams integration. The upgraded system will provide high-definition video, clear and intelligible audio, intuitive user controls, and improved system reliability. In addition to enhancing day-to-day operations, the modernization effort will reduce long-term maintenance requirements and present a more professional and effective communication environment. Please state where each item is manufactured due to the Buy American Act. 4. SCOPE Upgrading the CARES B/ SCI Dining Room from outdated equipment to more reliable, modern technology prevents common technical issues like poor audio or connection problems, saving time and reducing frustration. Crystal-clear audio and high-definition video ensure participants can see and hear clearly, which minimizes miscommunication and the need for repetition. Modern AV systems are often more user-friendly, sometimes controlled via apps, allowing everyone to share content easily without needing constant tech support. A modern system is more flexible and scalable, allowing it to adapt to the organization's changing needs in the future The rise of hybrid meetings means a conference room must support seamless virtual participation, which a modern AV system enables. Advanced features like integrated microphones and high-quality displays make it easier for teams to collaborate on projects and share information effectively, regardless of their location. High-quality visuals and audio make presentations more engaging, helping to capture audience attention. Creates a positive impression: Upgraded technology presents a more professional image to doctors, nurses, administrators, and new hires. While there is an upfront cost, upgrading can reduce long-term spending on maintenance and repairs for older equipment. The Contractor shall provide a complete, turnkey upgrade of the CARES B Conference Room AV system, transforming the existing environment into a fully integrated conferencing and presentation space. This effort includes the removal of existing legacy AV equipment, integration of Government- and Owner-furnished equipment, provision and installation of new system components, and full configuration, programming, testing, and commissioning of the upgraded system. The final system shall support: Microsoft Teams-based conferencing Multi-camera video capture and switching Advanced audio processing and microphone coverage Centralized system control through a user-friendly interface Seamless integration of all AV components into a unified platform All work shall be performed in a manner that minimizes disruption to facility operations and complies with VA IT, network, and security requirements. Video System: The Contractor shall implement a high-definition video system designed to support hybrid conferencing and presentation functionality. This includes installation of two (2) PTZ cameras positioned to capture both presenters and audience participants. The system shall allow dynamic camera selection and support multi-camera display configurations such as picture-in-picture and multi-view layouts. An owner-furnished conferencing computer shall be integrated into the system to provide Microsoft Teams functionality. A streaming device shall also be integrated as a content source. All video sources shall be routed through a centralized system to ensure consistent and reliable display and transmission. Audio System: The Contractor shall implement a fully integrated audio system designed to provide clear and intelligible sound for both in-room and remote participants. The system shall include wireless microphone systems supporting both handheld and lavalier use, along with charging and antenna distribution components. Ceiling-mounted microphone arrays shall be integrated to capture participant audio for conferencing purposes. Audio processing shall be managed through a digital signal processor capable of echo cancellation, mixing, and equalization. The system shall also include amplification components to support existing speakers and subwoofers. The final audio configuration shall support simultaneous conferencing and program audio while maintaining clarity and minimizing feedback or distortion. Control System: The Contractor shall install a modern control system to replace the existing unsupported platform. The system shall include a centralized control processor and a touchscreen user interface. The interface shall provide intuitive control over all AV system functions, including: System power Source selection Display operation Conferencing controls Camera operation and presets Audio levels and DSP settings The Contractor shall develop and submit the control interface design to the Government for review and approval prior to implementation. The final interface shall be user-friendly and require minimal technical expertise to operate. Network and Infrastructure: The Contractor shall install a managed network switch to support AV system communications and provide Power over Ethernet (PoE) to connected devices. The Contractor shall also provide and install an equipment rack system to house AV components. The rack shall include thermal management, cable organization, and power distribution systems to ensure long-term reliability and maintainability. 5. SPECIFIC TASKS Existing System Decommissioning: As part of the upgrade, the existing AV system will be partially decommissioned. VA personnel will remove select infrastructure components, including the projection system, wall control interfaces, and associated mounting hardware. The Contractor shall coordinate with VA staff to ensure proper sequencing of removal activities. The Contractor shall remove all remaining AV equipment associated with the legacy system, including audio processors, switching equipment, control systems, and signal distribution components. All removal activities shall be conducted carefully to avoid damage to existing infrastructure and to prepare the space for installation of the new system. Equipment Integration Strategy: The upgraded system will be constructed through a combination of existing equipment reuse, repurposed components, and newly provided equipment. The Contractor shall integrate existing Government-furnished equipment, including display systems, speakers, and select media devices, ensuring they function seamlessly within the upgraded AV environment. Additionally, the Contractor shall retrieve and integrate Owner-furnished equipment from VA storage, including AV-over-IP infrastructure, digital signal processing equipment, microphone arrays, control systems, and power distribution components. All repurposed equipment shall be inspected, tested, and verified for operational readiness prior to integration. Any deficiencies shall be reported to the Contracting Officer s Representative (COR). The Contractor shall also provide all new equipment necessary to complete the system, including cabling, network infrastructure, mounting hardware, wireless audio systems, and camera systems. All Contractor-furnished equipment shall be new, OEM-certified, and fully compatible with the system design. Existing Equipment (In-Room Reuse): The Contractor shall integrate the following existing equipment currently installed within the CARES B Conference Room: 85 Samsung display with articulating mount Panasonic Blu-ray player eVideon patient care IPTV receiver (LG player) Tascam CD player Atlas ceiling speakers Atlas ceiling subwoofers Crestron C2N-IO control port expansion module This equipment shall be: Inspected and tested for operational readiness Integrated into the upgraded AV system Configured to function as part of the unified control and signal distribution architecture Owner-Furnished Equipment (Repurposed from Storage): The Contractor shall retrieve, validate, and integrate equipment repurposed from other VA projects, including: Crestron DM NVX AV-over-IP infrastructure (chassis, encoder, decoder cards) Extron MediaPort scaling bridge (HDMI/audio to USB) Rack mounting hardware and accessories Shure networked docking station Biamp Tesira Forte DSP (AEC/VoIP capable) Shure MXA910 ceiling microphone arrays QSC 4-channel amplifier Crestron 4-Series control system Crestron 7 tabletop touch panel Power distribution units and rack accessories HDMI cabling All repurposed equipment shall be: Verified operational prior to installation Fully integrated into system architecture Reported to the COR if any deficiencies are identified System Configuration and Functional Requirements: Video System: The Contractor shall implement a multi-source, multi-camera video system supporting both presentation and conferencing environments. The system shall include: Integration of an owner-furnished Microsoft Teams PC installed within the AV rack Integration of a streaming device (Firestick) connected to the display Installation of two (2) HD PTZ cameras: One mounted to capture audience participants One ceiling-mounted to capture presenters The Contractor shall provide and integrate a multi-camera switching processor capable of: Dynamic camera switching Dual-camera output for conferencing Layout control including: Picture-in-Picture (PiP) Picture-over-Picture (PoP) Multi-view configurations The system shall allow: Seamless switching between camera feeds Integration with conferencing software Control via touchscreen interface Additionally, an audio signal conversion interface shall be installed to convert display audio output into a balanced signal for system-wide audio integration. Audio System (Integrated Conferencing + Program Audio): The Contractor shall provide and implement a comprehensive audio system designed to support both conferencing and in-room audio playback. This includes: Wireless Audio Two (2) digital wireless microphone systems Each consisting of: One (1) handheld microphone One (1) bodypack with lavalier microphone Charging stations and antenna distribution systems Ceiling Audio Capture Integration of Shure MXA910 ceiling microphone arrays Configured specifically for conferencing audio pickup Not used for in-room speech reinforcement Audio Processing Integration of Biamp Tesira Forte DSP providing: Echo cancellation (AEC) Audio mixing Signal routing Equalization Amplification Installation of a 4-channel amplifier to power: Existing ceiling speakers Subwoofers System shall support flexible power allocation across channels The audio system shall: Deliver clear and intelligible speech for remote participants Support simultaneous program and conferencing audio Eliminate feedback and distortion Control System: The Contractor shall replace the existing control system with a modern Crestron-based control platform, including: Crestron PRO4 processor 7 touchscreen interface mounted on rack pull-out shelf The Contractor shall design and submit a custom touchscreen interface for VA approval prior to implementation. The control system shall provide centralized operation of all AV functions, including: System power (On/Off) Display control Source selection Microsoft Teams conferencing controls Camera controls: Selection PTZ movement Presets Layout configuration eVideon system control (as available) Audio DSP controls: Individual source volume Microphone levels Master volume The interface shall be: Intuitive Role-based if required Designed to minimize user error and training requirements Network and System Infrastructure: The Contractor shall install a 24-port managed PoE+ switch to support: Ceiling microphones DSP Control system Cameras Touch interface The network shall: Support AV-over-IP communication Provide reliable and secure device connectivity Align with VA network requirements Equipment Rack and System Housing: The Contractor shall provide and install a 35-space AV equipment rack to house all system components. The rack shall include: Locking front and rear doors Thermal management system Rack rails and mounting hardware Vertical power distribution units The rack shall: Support proper cable management Ensure system accessibility for maintenance Provide long-term system stability and organization Installation, Programming, and Commissioning: The Contractor shall perform all installation, system configuration, and programming necessary to deliver a fully operational AV system. Following installation, the Contractor shall conduct comprehensive system testing, including verification of audio performance, video quality, conferencing functionality, and control system operation. The Contractor shall demonstrate full system functionality to the Government prior to acceptance. Deliverables: MANUFACTURER MODEL NUMBER QTY CABLES TO GO CAB39878 1 CHIEF CHIPAC810 1 CRESTRON CRECENSWPOE26 1 INOGENI INOSHARE2 1 MIDDLE ATLANTIC MIDCBSERK25 1 MIDDLE ATLANTIC MIDERK3525 1 MIDDLE ATLANTIC MIDERKRR35 1 MIDDLE ATLANTIC MIDLVFD35 1 MIDDLE ATLANTIC MIDMW10FTFC 1 MIDDLE ATLANTIC MIDUTR1 3 RADIO DESIGN LABS RDLTXJ3 1 SHURE SHUQLXD1H50 2 SHURE SHUQLXD2SM58H50 2 SHURE SHUQLXD4H50 2 SHURE SHUSB900C 4 SHURE SHUUA221 1 SHURE SHUUA834WB 2 SHURE SHUUA850 2 SHURE SHUUABIASTUS 2 SHURE SHUWL184MBSTQG 2 VADDIO INC VAD5352000206 1 VADDIO INC VAD99999600100W 2 6. Performance Monitoring The COR will verify items that have been delivered and installed in accordance with the contractual agreement and delivery schedule and ensure that acceptance and tagging of the equipment is completed. 7. Security Requirements The C&A requirements do not apply, and the Security Accreditation package is not required for this SOW. 8. Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). 85 Samsung display and articulating mount Panasonic Blu-ray player eVideon patient care IPTV receiver (LG player) Tascam CD player Atlas ceiling speakers Atlas ceiling subwoofers Crestron C2N-IO control port expansion module Crestron CARD CHASSIS, DM FOR DM-NVX-C & DMCF, 8 SLOTS Crestron ENCODER CARD, DM 4K60 4:4:4 HDR NETWORK AV Crestron ENCODER/DECODER CARD, DM NVX 4K60 4:4:4 HDR NETW Crestron ENCODER/DECODER, DM NVX 4K60 4:4:4 HDR NETWORK AV Extron MEDIAPORT SCALING BRIDGE, HDMI AND AUDIO TO USB Extron RACK SHELF KIT, 1U 9.5" DEEP - UNIVERSAL Shure 2 BAY NETWORKED DOCKING STATION Biamp TESIRA FORTE DSP, 12 X 12 CH AVB, AEC, VOIP Shure MICROPHONE, CEILING,W/ INTELLIMIX FOR 24" GRID, WHITE QSC AMPLIFIER, 4 CHANNEL 70V Crestron CONTROL SYSTEM, 4-SERIES Crestron TOUCH SCREEN, 7" TABLETOP, BLACK SMOOTH MAP POWER STRIP, 20 OUTLET 15 AMP SRG/NFY VERTICAL MAP POWER STRIP, 9 OUTS, 15A SERIES SURGE MAP SHELF, LOW PROFILE - ECONOMICAL SLIDING Crestron CABLE, 6 FT HDMI INTERFACE CABLE Crestron CABLE, 12 FT HDMI INTERFACE CABLE 9. Other Pertinent Information or Special Considerations. Due to the integrated and proprietary nature of the Audio-Visual (AV) systems included in this requirement, particularly the Crestron-based control infrastructure and associated AV-over-IP components, the Contractor shall ensure that all personnel assigned to this project possess the necessary manufacturer-level technical expertise, tools, software access, and credentials required to perform installation, configuration, programming, troubleshooting, and support activities. The Contractor must demonstrate the capability to perform programming-level modifications and system diagnostics without reliance on third-party escalation for routine system support. This includes, but is not limited to: Access to required Crestron programming environments and licensed software Ability to configure and modify control system logic, user interfaces, and device communication Experience with integration of Crestron, Shure, Biamp, and AV-over-IP systems Capability to independently troubleshoot and resolve system-level issues Given the mission-critical nature of the CARES B Conference Room and its role in supporting communication, collaboration, and operational coordination, failure to provide adequately qualified personnel with the required access and expertise may result in: Increased system downtime Delayed troubleshooting and repair activities Reduced system reliability Disruption to critical VA operations Accordingly, this requirement is considered essential to successful contract performance, and the Contractor shall ensure that appropriately qualified and authorized personnel are assigned throughout the duration of the project. a. Identification of Possible Follow-on Work. NA b. Identification of Potential Conflicts of Interest (COI). NA c. Identification of Non-Disclosure Requirements. NA d. Packaging, Packing and Shipping Instructions. NA e. Inspection and Acceptance Criteria. The COR will verify items are installed in accordance with the contract and verify that the systems are operational upon completion. 10. Risk Control General Security: Contractors, contractor personnel, subcontractors, and subcontractor personnel shall be subject to the same Federal laws, regulations, standards, and VA Directives and Handbooks as VA and VA personnel regarding information and information system security. Check - In Requirements: The Contractor Service Personnel and/or representative must report to the appropriate department Supervisor or designated point of contact (POC) to sign in with department staff before work begins. Additionally, one must submit any mobile media devices that would be used on the system for a virus scan. Upon completion of work, the Contractor Service Personnel and/or representative must report to the appropriate department Supervisor to brief that Supervisor or related department staff point of contact (POC) if Supervisor is unavailable concerning completion of service, and then to sign out. At the end of each briefing, Contractor Service Personnel and/or representative will and must sign out. SECURITY INCIDENT INVESTIGATION: The term security incident means an event that has, or could have, resulted in unauthorized access to, loss or damage to VA assets, or sensitive information, or an action that breaches VA security procedures. The contractor/subcontractor shall immediately notify the COTR and simultaneously, the designated ISO and Privacy Officer for the contract of any known or suspected security/privacy incidents, or any unauthorized disclosure of sensitive information, including that contained in system(s) to which the contractor/subcontractor has access. To the extent known by the contractor/subcontractor, the contractor/subcontractor s notice to VA shall identify the information involved, the circumstances surrounding the incident (including to whom, how, when, and where the VA information or assets were placed at risk or compromised), and any other information that the contractor/subcontractor considers relevant. LIQUIDATED DAMAGES FOR DATA BREACH: Consistent with the requirements of 38 U.S.C. §5725, a contract may require access to sensitive personal information. If so, the contractor is liable to VA for liquidated damages in the event of a data breach or privacy incident involving any SPI the contractor/subcontractor processes or maintains under this contract. However, it is the policy of VA to forgo collection of liquidated damages in the event the contractor provides payment of actual damages in an amount determined to be adequate by the agency. Based on the determinations of the independent risk analysis, the contractor shall be responsible for paying to the VA liquidated damages in the amount of $37.50 per affected individual to cover the cost of providing credit protection services to affected individuals consisting of the following: (1) Notification. (2) One year of credit monitoring services consisting of automatic daily monitoring of at least 3 relevant credit bureau reports. (3) Data breach analysis. (4) Fraud resolution services, including writing dispute letters, initiating fraud alerts and credit freezes, to assist affected individuals to bring matters to resolution. (5) One year of identity theft insurance with $20,000.00 coverage at $0 deductible; and (6) Necessary legal expenses may incur to repair falsified or damaged credit records, histories, or financial affairs. Place of Performance: The place of performance was at: Cleveland VAMC 10701 East Blvd Cleveland, OH 44106 If you are interested and can provide the sought-out supplies/services, please provide the requested information indicated below. Response to this notice should include company name, address, point of contact, DUNS number, and size of business pursuant to the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.) Is your company considered small under the NAICS code identified under this RFI? If not, is your company considered small under a related NAICS code? Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). If you re a small business and you are an authorized distributor/reseller for the items identified above (or an equivalent solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions you are providing information for available on your schedule/contract? Please provide general pricing of your products/solution for market research purposes. Please submit your capabilities in regard to the salient characteristics being provided and any information pertaining to brand name or equal to items to establish capabilities for planning purposes. No re-manufactures or gray market items will be acceptable. Vendor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other documents from the OEM. SUBMISSION Responses to this notice shall be submitted via email to kevin.peeples@va.gov and Robert.blasko@va.gov . Telephone responses shall not be accepted. Responses must be received no later than September 3 2026, at 4:00pm EST, (Eastern Standard Time). If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (1)
- Download
36C25026Q0967.docx
48 KBAdded in Sources Sought version 1Posted
Links (1)
- Veterans Affairs Home Pagewww.va.govPosted
Lifecycle
- 1Version 1Sources SoughtCurrent
6515--541-26-3-250-0366 - CABLES TO GO
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THIS IS A PRE-SOLCITATION NOTICE: The Network Contracting Office 10 intends to solicit a firm fixed price, purchase order for uninterruptible power supply (UPS) systems for the new East Indianapolis VA Clinic. The solicitation will be a brand-name request as allowed per FAR 12.102(a).  Brand-Name Description: 3 each - Medi-Products Silent Sentry SSA2080V 1 each - Medi-Products Silent Sentry SSA30180V Set-Aside - the Solicitation is anticipated to be set aside for a Small Business. NAICS Code 335999 All Other Misc. Electrical Equipment and Component Manufacturing. NAICS Size Standard is 600 employees. The Product Service Code is 6130 Converters, Electrical, Nonrotating This solicitation shall be conducted in accordance with FAR Overhaul Procedures outlined in RFO Part 12. Award will be made to a responsible small business with the lowest price. All potential quoters MUST be registered and active in SAM.gov. The solicitation will be issued electronically and will be available only via the Contract Opportunities / System for Award Management website No fax bid packages shall be accepted. The solicitation will be publicized on or about November 10, 2026.  No phone, fax or email inquiries will be accepted for this Pre-Solicitation Notice | - | Pre-Solicitation | Open |
Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice DESCRIPTION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. This solicitation is a Brand Name Only Small Business set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 333914. The FSC/PSC is 6515. The NCO 10 for Cleveland VA Medical Center is seeking to purchase the UltraSAFE Unit: Automatic Formalin Dispensing System for the Surgical Department. This solicitation closes on September 24, 2026 @ 16:00 PM. Quotes should be submitted to Kevin Peeples kevin.peeples@va.gov Please reference 36C25026Q1068 1. Contracting Officer s Representative (COR) NA 2. CONTRACT TITLE: UltraSAFE Unit: Automatic Formalin Dispensing System 3. BACKGROUND The VA Northeast Ohio Healthcare System (VANEOHS) is requesting the purchase of Brand Name Only, UltraSafe formalin dispensing system to include all accessories included with purchase. This system will allow Cleveland VAMC to be compliant with VA guidelines and have the equipment to keep our veterans and OR staff safe in case of a Formalin spill. There have been issues with the current hood system and PPE being used and the new system will address all issues. The Safety Department performed a walk-thru in the OR and a safety concern was raised by the safety department because of a lack of an Ultrasafe Formalin Dispenser. Not having this UltraSafe dispense could cause harm to patients/OR staff if Formalin spills and is not handled properly Cleveland VAMC is the only surgical facility in the VISN that does not have one. 4. SCOPE Government market research and justification studies consistently indicate that the UltraSAFE system occupies a unique Brand Name Only operational niche. It regularly outcompetes alternative or manual methods due to a proprietary, fully enclosed ecosystem. Proprietary Valve Technology: It utilizes custom buckets designed with a non-return quadricuspid safety valve, allowing automatic injection of formalin without letting toxic fumes escape. Traceability Integration: Unlike generic chemical dispensers, it features built-in scales, barcode readers, and thermal printers to automate documentation, recording the exact tissue weight, time to fixation, and formalin volume. Independent Infrastructure: Features built-in charcoal and HEPA filters, allowing it to function as a standalone unit without requiring expensive modifications to a facility's external HVAC or exhaust lines. The Purchase of the UltraSAFE Unit will allow Cleveland VAMC OR department to be compliant with VA guidelines also have the equipment needed to keep our veterans and OR staff safe in case of a Formalin spill there have been issues with the hood system and PPE being used and this new system would address all those concerns. 5. Specific Tasks UltraSafe is the only system that could meet all needs. It is a zero-formalin exposure it will fill .5L containers and print off labels with employee info and sample information. All the other manufacturers researched could not meet these needs. The item MUST have the following: Fully ventilated enclosure Have items automated by weight Label print & LIMS Data Zero operator Fume escape UltraSafe is a proprietary system manufactured and exclusively supplied by Milestone Medical. UltraSafe is the only system that could meet all needs of a zero-formalin exposure system that prints off labels with employee and sample info and the entire operation is also fume-free. Core Safety Characteristics: Enclosed & Vented Chamber: The entire dispensing process happens inside an auto-locking, fully enclosed chamber equipped with charcoal and HEPA H14 filters. This design removes the need to hook the workstation into external building ventilation lines Patented One-Way Valve Lids: Specimens are placed into custom buckets that seal immediately. The system uses an automatic injection nozzle that penetrates a special quadricuspid valve in the lid to inject the fluid, ensuring fumes cannot escape and preventing any backflow or spillages Weight-Based Automated Dispensing: The unit features a built-in scale. It detects the weight of the biospecimen and automatically dispenses the perfect volume of formalin to match preset laboratory ratios (e.g., a 1:3 specimen-to-fixative ratio) Data Logging & Traceability: A built-in barcode reader logs bucket IDs and case numbers. An integrated thermal printer automatically outputs detailed labels recording the specimen weight, exact formalin volume, and the precise time to fixation to maintain a strict chain of custody 6. Performance Monitoring Biomedical Engineering staff will work with warehouse staff to ensure delivery and incoming inspection to determine fitness for use. 7. Security Requirements The requirements do not apply; The contractor will not have access to VA sensitive information. 8. Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). There will be no government-Furnished equipment of information. 9. Other Pertinent Information or Special Considerations. The requested equipment shall be interoperable/usable with current workflows and technology deployed and used within the clinical atmosphere and existing BX Microscopes and associated accessories. a. Identification of Possible Follow-on Work. NA b. Identification of Potential Conflicts of Interest (COI). NA c. Identification of Non-Disclosure Requirements. NA d. Packaging, Packing and Shipping Instructions. NA e. Inspection and Acceptance Criteria. Biomedical Engineering staff will work with warehouse staff to ensure delivery and incoming inspection to determine fitness for use. 10. Risk Control The Surgical Service will follow any safety recommendations given by the vendor and Biomed for the equipment. 11. Place of Performance. Delivery Location: Louis Stokes Cleveland VA Medical Center 10701 East Boulevard Cleveland, OH 44106 12. Period of Performance NA 13. Delivery Schedule. One time buy SUBMISSION Responses to this solicitation shall be submitted via email to kevin.peeples@va.gov. Telephone responses shall not be accepted. Responses must be received no later than September 24 2026, at 16:00 pm EST, (Eastern Standard Time). CLAUSES FAR Number Title Date 52.209-6 PROTECTING THE GOVERNMENT S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT JAN 2025 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS NOV 2023 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS APR 2026 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER SYSTEM FOR AWARD MANAGEMENT OCT 2018 52.252-2 CLAUSES INCORPORATED BY REFERENCE FEB 1998 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS MAR 2023 52.233-1 DISPUTES MAY 2014 52.233-3 PROTEST AFTER AWARD AUG 1996 852.219-76 852.203-70 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING-CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (DEVIATION) COMMERCIAL ADVERTISING JAN 2023 MAY 2018 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS NOV 2018 852.237-70 CONTRACTOR RESPONSIBILITIES OCT 2019 PROVISIONS 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS SEP 2023 52.212-2 EVALUATION--COMMERCIAL ITEMS NOV 2021 | - | Combined Synopsis | 09/24/2026 |
6515--541-26-3-250-0303 - Olympus BX43 Pathology Microscope Brand Name Only Small Business Set-Aside Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice DESCRIPTION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. This solicitation is a Small Business set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112. The FSC/PSC is 6515. The NCO 10 for Cleveland VA Medical Center is seeking to purchase the Olympus BX Microscope for the Cytology Department. This solicitation closes on September 25, 2026 @ 13:00 AM. Quotes should be submitted to Kevin Peeples kevin.peeples@va.gov Please reference 36C25026Q1066 1. Contracting Officer s Representative (COR NA 2. CONTRACT TITLE: BX43-1-3 Cytology Microscopes 3. BACKGROUND The Department of Veterans Affairs Northeast Ohio Healthcare System (VANEOHS) has an immediate requirement for the procurement of two (2) brand name Evident (formerly Olympus) BX43-1-3 cytology microscopes, inclusive of the True Color LED light source compatible with BX43F, BX46F, and BX63F platforms, and all required Original Equipment Manufacturer (OEM) components and accessories necessary for full clinical activation and use. The requested microscopes are additional units to the currently deployed Evident BX-series microscopes within the Cytology Section of Pathology & Laboratory Management Services (PALMS). The laboratory s diagnostic workflows, digital imaging systems, standardized operating procedures, educational protocols, and preventative maintenance programs are fully based upon the Evident BX-series platform. The Cytology laboratory s diagnostic workflows, digital imaging systems, standardized operating procedures, educational platforms, and preventative maintenance programs are built upon the BX-series architecture. The Cytology Section performs high-resolution visualization and evaluation of: Cellular morphology Cytological abnormalities Microbiological organisms Inflammatory processes Neoplastic pathologies These diagnostic evaluations are mission-critical to accurate, timely, and actionable patient diagnoses. This acquisition is required to maintain full operational capacity, mitigate diagnostic backlog, maximize utilization of existing Government-owned assets, and ensure uninterrupted cytopathology services. 4. SCOPE The Contractor shall provide two (2) new, current production BX43-1-3 microscopes, inclusive of the True Color LED light source and all requested and associated OEM components, accessories, modules, assemblies, and consumables required for immediate clinical deployment within the Cytology Section. The Contractor shall provide on-site installation, configuration, and operational verification of all microscopes and associated OEM components at the Louis Stokes Cleveland VA Medical Center, Pathology & Laboratory Management Services Cytology Section. Installation shall include full assembly, alignment of optical components, calibration of the illumination system, verification of mechanical stage functionality, confirmation of imaging integration (if applicable), and validation of overall system performance for clinical diagnostic use. All equipment shall be fully operational and ready for immediate patient care application upon completion of installation. Any deficiencies identified during installation or inspection shall be corrected by the Contractor at no additional cost to the Government prior to final acceptance. The microscopes and components shall meet or exceed the following operational, optical, interoperability, and performance requirements: Optical and Imaging Performance: UIS2 infinity-corrected optical system Plan Apochromat or Plan Fluorite objectives optimized for cytology applications High numerical aperture objectives suitable for oil immersion cytopathology 100x oil immersion capability Wide field number (FN 22 or greater) High-resolution visualization suitable for evaluation of cellular morphology, cytologic abnormalities, infectious organisms, and neoplastic processes OEM camera adapter compatibility for integration with existing digital imaging systems Illumination System: True Color LED light source compatible with BX43F, BX46F, and BX63F Daylight-balanced illumination to support accurate cytologic color interpretation Flicker-free, stable output LED lifespan 20,000 hours Intensity memory function Uniform illumination across full field of view Ergonomic and Mechanical Features: Ergonomic observation tube with adjustable inclination Low-position coaxial focus knobs Coarse and fine focus with tension adjustment Precision mechanical stage with fine movement control Stage inserts compatible with cytology slide preparation Configuration optimized for prolonged microscopic review Required OEM Accessories and Components: The Contractor shall provide all OEM components necessary to ensure full functionality and activation, including but not limited to: Proprietary stage inserts Light modules Camera adapters Immersion oil kits (OEM approved) Dust covers Power cords Calibration and setup materials Required mounting hardware Any additional OEM components necessary for clinical operation All components must be new, OEM-manufactured, and fully compatible with existing Evident BX-series microscopes currently deployed within the laboratory. Interoperability Requirements: The Cytology Section is standardized on the Evident BX-series microscope platform. All diagnostic workflows, imaging protocols, training materials, and maintenance programs are built upon this system. The requested microscopes are additional to the currently deployed fleet and must: Integrate seamlessly with existing BX-series equipment Maintain optical consistency across the microscope fleet Preserve manufacturer warranty protections Support existing service contracts and maintenance protocols Require no retraining due to platform change Non-OEM or alternate-brand equipment would: Disrupt standardized diagnostic workflow Introduce optical variability affecting diagnostic consistency Invalidate manufacturer warranties Require retraining of cytotechnologists and pathologists Undermine fleet uniformity and serviceability Warranty: Equipment shall include the manufacturer s standard warranty covering optical, mechanical, and illumination systems for a minimum of one (1) year. 6. Performance Monitoring The Government will monitor contractor performance to ensure compliance with all requirements outlined in this Statement of Work. Performance monitoring will include verification of timely delivery, proper installation, system functionality, completion of required training, and successful commissioning of the equipment in accordance with manufacturer specifications. Government representatives, including Pathology & Laboratory Medicine Service personnel and designated technical staff, will validate that the system operates as intended and meets operational and functional requirements prior to acceptance. Any deficiencies identified during delivery, installation, or operational verification shall be corrected by the Contractor at no additional cost to the Government. The Contractor shall coordinate all activities with the designated Government point of contact to ensure minimal disruption to laboratory operations and adherence to agreed installation schedules. 7. Security Requirements The C&A requirements do not apply, and the Security Accreditation package is not required for this SOW. 8. Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). There will be no government-Furnished equipment of information. 9. Other Pertinent Information or Special Considerations. The requested equipment shall be interoperable/usable with current workflows and technology deployed and used within the clinical atmosphere and existing BX Microscopes and associated accessories. a. Identification of Possible Follow-on Work. NA b. Identification of Potential Conflicts of Interest (COI). NA c. Identification of Non-Disclosure Requirements. NA d. Packaging, Packing and Shipping Instructions. NA e. Inspection and Acceptance Criteria. Government acceptance will occur upon: Successful installation Demonstrated operational functionality Completion of training if applicable Readiness for clinical laboratory use 10. Place of Performance. Delivery Location: Louis Stokes Cleveland VA Medical Center Pathology & Laboratory Management Services Cytology 10701 East Boulevard Cleveland, OH 44106 11. Period of Performance NA 12. Delivery Schedule. The Contractor shall deliver all required equipment and system components within ninety (90) calendar days from the date of contract award. Installation, configuration, and commissioning activities shall be coordinated with Government personnel and completed within the same 90-day period unless otherwise agreed upon in writing by the Contracting Officer. SUBMISSION Responses to this solicitation shall be submitted via email to kevin.peeples@va.gov. Telephone responses shall not be accepted. Responses must be received no later than September 25 2026, at 13:00 pm EST, (Eastern Standard Time). CLAUSES FAR Number Title Date 52.209-6 PROTECTING THE GOVERNMENT S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT JAN 2025 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS NOV 2023 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS APR 2026 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER SYSTEM FOR AWARD MANAGEMENT OCT 2018 52.252-2 CLAUSES INCORPORATED BY REFERENCE FEB 1998 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS MAR 2023 52.233-1 DISPUTES MAY 2014 52.233-3 PROTEST AFTER AWARD AUG 1996 852.219-76 852.203-70 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING-CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (DEVIATION) COMMERCIAL ADVERTISING JAN 2023 MAY 2018 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS NOV 2018 852.237-70 CONTRACTOR RESPONSIBILITIES OCT 2019 PROVISIONS 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS SEP 2023 52.212-2 EVALUATION--COMMERCIAL ITEMS NOV 2021 | - | Combined Synopsis | 09/25/2026 |
Proposed procurement for NSN 6140015485478 BATTERY,STORAGE: Line 0001 Qty 33 UI EA Deliver To: DLA DISTRIBUTION PUGET SOUND By: 0113 DAYS ADO Approved source is 0XBF7 ETI0002-0801. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically. | - | Combined Synopsis | 11/18/2026 |
Proposed procurement for NSN 5930014906723 SWITCH,PROXIMITY: Line 0001 Qty 38 UI EA Deliver To: DLA DISTRIBUTION SAN DIEGO By: 0512 DAYS ADO Approved sources are 08748 8-827-02; 76301 5M2885-002. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/19/2026 |
Additional Details
Solicitation Number
36C25026Q0967
Archive Date
Nov 2, 2026
Office Address
DAYTON, OH, 45428