GovChime
Notice ID: 16b4e455f5f349d9bacbe87fedca106fSpecial Notice

6515--VISN 12 Implant Tracking Software for six locations

Archived on July 24, 2021. Full description on SAM.gov.

Overview

Posted
June 24, 2021
Notice type
Special Notice
NAICS
511210: Classification Not Available
Agency
Department of Veterans Affairs

Notice details

Office
252-NETWORK CONTRACT OFFICE 12 (36C252)
Last updated
Dec 6, 2025

Identifiers

Solicitation number
36C25222Q0002
Notice ID
16b4e455f5f349d9bacbe87fedca106f

Description

Notice of Intent to Sole-Source an Acquisition Under Statutory Authority U.S.C. 253(c)(1) the Government anticipates entering into sole-source procurement negotiations with LPIT Solutions to continue leasing their TrackCore Software for the Milwaukee VA Medical Center, the Edward Hines Jr. VA Hospital, the Jesse Brown VA Medical Center, the North Chicago FHCC, the Madison VA Hospital, and the Iron Mountain VAMC. The above authority is cited and justification made based on the determination that the Government's minimum needs can best be satisfied by services available from one source. This announcement is for services for which the Government intends to solicit and negotiate with only one source under FAR 6.302-1. Other persons may identify their interest and capability by responding to this requirement by June 30, 2021, 0900 Local Time. This notice of intent is not a request for competitive proposals. However, all interest received on or before June 30, 2021, 0900 Local Time will be considered by the Government. A determination by the Government not to open the requirement to competition based upon responses to this notice is solely within the discretion of the Government. Information received as a result of the notice of intent will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. No solicitation document is available

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C25222Q0002
  1. Special NoticeCurrentJun 24, 2021

    6515--VISN 12 Implant Tracking Software for six locations

    Notice 16b4e455f5f349d9bacbe87fedca106f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
NOTICE OF INTENT TO AWARD SOLE SOURCE. THIS IS NOT A REQUEST FOR COMPETITIVE QUOTES. This is a notice of intent to solicit and award a sole source contract set forth in accordance with the Revolutionary FAR Overhaul (RFO) 12.102(a), Restricting competition. The Department of Veteran Affairs, Veterans Health Administration, Network Contracting Office 12 (NCO-12) Great Lakes Acquisition Center, intends to negotiate a sole source Firm-Fixed Price to Imagine Milling Technologies Inc: 607 S Euclid St, Fullerton, CA, 92832 IAW Federal Acquisition Regulation/Revolutionary FAR Overhaul 12.102. This is for procurement of the GmbH Dental Exoplan/Exocad System for the Dental Department located at Clement J. Zablocki Veterans Affairs Medical Center: 5000 West National Avenue, Milwaukee, WI 53295-0001. The North American Industry Classification System (NAICS) for this requirement is: 513210- Software Publishers. The Product of Service Code for this requirement is: 6515 -Medical/Surgical Instruments, equipment and supplies. The Small Business Administration (SBA) size standard for this sector is: $47.0 million. Sole Source Justification of GmbH Dental Exoplan/Exocad System Rationale: Pursuant to RFO 12.102(a), there is “only one source reasonably available” to provide the requested end-product under this acquisition. Background The Milwaukee VA Medical Center (VAMC) Dental Laboratory requires the renewal of twenty-one (21) Exocad/Exoplan software licenses for a sixty (60)-month period covering December 31, 2026, through December 30, 2031. These licenses support the Dental Laboratory's digital dentistry and 3-D printing operations at both the Milwaukee VAMC and the Milo C. Huempfner VA Health Care Center. Justifications: Pursuant to RFO 12.102(a), there is only one source reasonably available to provide the required end-product under this acquisition. Award to Imagine Milling Technologies, Inc is justified on a sole source basis because the vendor previously supplied and configured the existing GmbH Exocad/Exoplan software licenses, as well as the associated computers, monitors, scanners, and related equipment currently utilized by the Dental Laboratory. The existing hardware and software environment operates as an integrated system specifically configured to function with the currently licensed GmbH Exocad/Exoplan platform. Obtaining software licenses through a different vendor would create substantial duplication of cost to the Government that is not expected to be recovered through competition. A different source would likely require the acquisition of new licenses and potentially additional compatible hardware, resulting in significant unnecessary expense. Furthermore, the Government has already invested in the current scanners, computers, monitors, and associated equipment that were purchased to operate with the existing software configuration. Failure to renew the current licenses would render portions of the existing equipment unusable for their intended purpose, resulting in wasted Government resources and the premature replacement of otherwise functional assets. Additionally, transitioning to an alternate solution would create operational disruptions to the Milwaukee VAMC Dental Laboratory's workflow and could negatively impact the production of patient-specific dental appliances produced through the laboratory's 3-D printing process. Any lapse in licensing or interruption in software functionality would jeopardize the Dental Laboratory's ability to continue providing essential services and could result in a shutdown of critical digital design and manufacturing operations. Renewal of the existing GmbH Dental Software licenses through Imagine Milling Technologies, Inc ensures continuity of operations, maintains compatibility with the current equipment infrastructure, protects the Government's prior investment, and prevents unnecessary costs associated with replacing functional hardware and software systems. The renewal will provide uninterrupted access to the GmbH Dental Exocad/Exoplan platform through 2031 and enable continued support of dental laboratory services at both facilities. For these reasons, Imagine Milling Technologies, Inc. is the only source capable of providing the required renewal services without substantial duplication of cost to the Government and unacceptable disruption to agency operations. No other product can meet the Dental Department’s operational and clinical requirements. Procuring any system other than the GmbH Dental Exocad/Exoplan software licenses system would introduce unacceptable clinical risk and negatively impact patient care. Award to Imagine Milling Technologies, Inc. is in the best interest of the Government because it ensures continued compatibility with the existing dental laboratory infrastructure, avoids substantial additional costs, prevents waste of Government-owned equipment, and maintains uninterrupted mission-critical dental laboratory operations. This announcement is being issued for information purposes only and does not constitute a solicitation or request for competitive proposals. If a firm believes it is capable of meeting the Government's requirement and capable of providing an authorized letter to perform supply/services on this end-product, it may identify their interest and capability to the Contracting Officer within five (5) calendar days of this publication by contacting the Contracting Officer, Arneil Genus via email only at arneil.genus@va.gov. Telephone inquiries will not be accepted. Respondents who submit proprietary data shall clearly mark the data with appropriate markings. Those interested firms must indicate whether they are large, small, small-disadvantaged, 8(a) or woman owned business and whether they are U.S. or foreign owned. The Government will not pay for any information submitted as a result of this announcement. This special notice shall not be construed as an obligation on the part of the Government to acquire any products or services. Responses are due no later than Thurday, Nov. 5, 2026 at 1:00 PM Central Standard Time. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses received to this notice is solely within the discretion of the Government. If no written response is received within the closing date of this notice, a sole source award will be made to Imagine Milling Technologies, Inc. without any further notice.
-Special Notice11/05/2026
Revision: 01 Effective Date: 11/15/2024 Acquisition ID#36C252-27-AP-0957 Page 1 of 2 Please note that this is not a request for proposal nor a request for quote as there is no solicitation document available. Therefore, this is a notice of intent issued by the Department of Veterans Affairs to negotiate a limited source contract with Iramed Corporation. DEPARTMENT OF VETERANS AFFAIRS Justification for Single Source Awards RFO FAR 12.102 For Over Micro-Purchase Threshold but Not Exceeding the SAT ($250K) Acquisition Plan Action ID: 36C252-27-AP-0957 Contracting Activity US Department of Veterans Affairs Great Lakes Acquisition Center (GLAC) VISN 12 115 S. 84th Street Milwaukee, WI 53214 2237: 556-27-1-2993-0011 Brief Description of Supplies/ Services required and the intended use/Estimated Amount: The Captain James A. Lovell Federal Healthcare Center (FHCC), Building 556, Nursing Services, is requesting the acquisition of one MRI-compatible IV infusion pump system for the Intensive Care Unit (ICU). MRI-compatible infusion pumps are medically necessary for ICU patients who require continuous vasoactive or sedative titratable infusions while undergoing magnetic resonance imaging (MRI) to support the diagnosis and evaluation of complex disease processes. Estimated Amount: $105,270.20 Unique characteristics that limit availability to only one source, with the reason no other supplies or services can be used: The availability of this equipment will enable FHCC to perform medically necessary MRI examinations on-site, reducing the need to transfer patients to outside facilities. Currently, these patients are often taken for CT scans; however, CT imaging may not provide the comprehensive diagnostic information required for certain conditions Standardization and compatibility with the MRI IV infusion equipment currently installed at the facility are essential requirements for this acquisition. The requested system is intended to integrate with the existing equipment and support established clinical workflows, training, maintenance, and operational procedures. Substituting products from another manufacturer could result in incompatibility, require additional accessories or system modifications, necessitate staff retraining, and increase costs to the facility. Therefore, procurement of the compatible MRI IV Infusion Pump System is justified to maintain system continuity, operational efficiency, and patient-care capabilities. Description of market research conducted and results or statement why it was not conducted: Market Research Findings: An SBA.gov search under NAICS code 339112 identified zero (5) SDVOSBs and (13) VOSBs. Two additional searches were conducted on sba.gov by combining NAICS code 339112 with the keywords Quad Non-Magnetic IV Pump System and Non-Magnetic IV Pump System and applying specific filters for SDVOSBs and VOSBs. Both searches yielded zero (0) results. A search on GSA Advantage using the keywords Non-Magnetic IV Pump System produced several results that does not appear to meet the requirement. The Contracting Officer (CO) searched Google.com using the keywords Non-Magnetic IV Pump System and identified several vendors, including BD, BioSpace, Hospital & Healthcare management, Iradimed, InMed, MDPI, and Ivenix. Although several alternative vendors were identified, their products are not compatible with the MRI IV infusion equipment currently installed at the facility. Standardization and compatibility are essential requirements for this acquisition. The requested system is designed to integrate with the existing equipment and support established clinical workflows, training, maintenance, and operational procedures. Substituting products from another manufacturer could lead to compatibility issues, require additional accessories or system modifications, necessitate staff retraining, and increase facility costs. Therefore, procuring the compatible MRI IV infusion pump system is justified to ensure system continuity, operational efficiency, and uninterrupted patient-care capabilities. CO received a letter of authorization from the vendor that certifies Iradimed Corporation is the sole manufacturer and authorized seller of the MRidium 3870 MRI Infusion System and its accessories. Due to proprietary considerations, Iradimed Corporation is also the exclusive source for replacement parts for the MRidium MRI Infusion Pump System. The MRidium 3870 MRI Infusion System is the only nonmagnetic, MRI-compatible IV infusion pump currently available on the market. Contracting Officer's Certification: Purchase is approved in accordance with RFO FAR 12.102. I certify that the foregoing justification is accurate and complete to the best of my knowledge and belief. Vernise L. Newton Contracting Officer
-Special Notice11/17/2026
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTE. The NCO 12, Great Lakes Acquisition Center, 115 S. 84th Street, Suite 101, Milwaukee, WI 53214, is performing market research to determine if there is a sufficient number of qualified: (1) Service Disabled Veteran Owned Small Business (SDVOSB); (2) Veteran Owned Small Business (VOSB); or (3) Small or emerging small business firms, or (4) Other Than Small business firms, to provide Humidifier Heater base, Humidifier Sensor Cartridge, and Humidifier Expiratory Heater to the , Captain James A. Lovell Federal Health Care Center in North Chicago, IL. General Requirements: Brand Name or Equal The below products are known to meet the governments needs all equal parts will be considered. 950 Humidifier Heater base, 950 Humidifier Sensor Cartridge, and 950 Humidifier Expiratory Heater Wire Adapter or Equal Salient Characteristics: Therapy Profiles: Must support Invasive ventilation Must support Noninvasive ventilation Must support Nasal High Flow therapy. Temperature Probes: Must have no external temperature probes Must incorporate internal temperature probes that do not require special disinfection processing Circuit Compatibility: Must be compatible with single heated circuits for non-invasive ventilation. Must be compatible with double heated circuits for invasive ventilation. User Interface: Must have a simple user interface Must include touch screen monitors to create setting modifications Must allow mode changes Must allow comfort setting adjustments Must display and troubleshoot alarms Must provide access to Information and Service menus Alarms: Must have built-in alarms for various conditions including but not limited to: 1. High Temperature alarms 2. Low Temperature alarms 3. Water Out alarms 4. Circuit Disconnect alarms 5. Reverse Gas Flow alarms 6. System check alarms Compatibility: Must be compatible with all ventilation and gas flow delivery devices that is currently used at FHCC, Specifically, must be compatible with Medtronic 980 ventilators Specifically, must be compatible with Philips V60 BiPAP devices Specifically, must be compatible with Nihon Kohden 330, 440, and 550 ventilator systems All interested firms who can meet the requirements stated above should respond, in writing, INCLUDING ALL THE FOLLOWING: Company name. Address. Point of contact (name/title/telephone number/e-mail address). FSS / SEWP Contract number, if applicable. SAM Unique ID number. Tax ID number. Indication of which business category (SDVOSB, VOSB, Small Business or Other Than Small Business) for which the organization qualifies. A capability statement that addresses the organizations qualifications and ability to provide the requirement depicted above. Documentation from manufacturer (i.e. correspondence from manufacturer) of your firm being an authorized distributor for the manufacturer. Submit responses to the Contracting Specialist, Ryan Nugent, at Ryan.Nugent@va.gov no later than 8:00 AM (Central Standard Time), 23 November 2026. 36C25227Q0090 950 Humidifier Heaterbase shall be referenced on all correspondence regarding this announcement. TELEPHONIC INQUIRIES WILL NOT BE ACCEPTED. The NAICS Code 339112, Surgical and Medical Instrument Manufacturing, is applicable to this acquisition; the size standard is 1,000 employees. Interested firms are reminded that in accordance with FAR 4.12, prospective contractors shall complete electronic annual representations and certifications in conjunction with FAR 4.11 required registration in the Systems for Award Management (SAM) database prior to award of a contract. The Government will use responses to this notice to make an appropriate acquisition decision. This is the only notice; no other copies of this notice will be provided.
-Market Research11/23/2026
This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of Other than Small Businesses and Small Businesses, including VetCert-certified Veteran-Owned Small Business (VOSB) or Service-Disabled Veteran-Owned Small Business (SDVOSB). The William S. Middleton Memorial Veterans Hospital in Madison, WI has the requirement for a brand name GE Healthcare TEC 850 Anesthesia Vaporizers. The Government is requesting that Other Than Small Businesses and Small Businesses, including VetCert-certified VOSB or SDVOSB sources respond if it can meet the description below on a brand name only basis (GE Healthcare TEC 850 Anesthesia Vaporizers): CLIN Item Description Qty Unit 0001 1177-9850-SEV TEC 850 Sevoflurane Vaporizer 3 EA 0002 1177-8350-000 TEC 850 SEVO Calibrated Assembly 3 EA 0003 M7209012 Easy-Fil Sevoflurance Filler 3 EA 0004 M7209024 TEC 850 SEVO GE 3 EA 0005 2106572-003 Easy-fil Bottle Adapter, Sevoflurane 3 EA 0006 2095452-001 TEC 850 English URM 3 EA 0007 1177-9850-ISO TEC 850 Isoflurane Vaporizer 2 EA 0008 1177-8150-000 TEC 850 ISO Calibrated Assembly 2 EA 0009 M7209011 EASY-FIL Isoflurance Filler 2 EA 0010 M7209022 TEC 850 ISO GE 2 EA 0011 2106572-001 Easy-fil Bottle Adapter, Isoflurane 2 EA 0012 2095452-001 TEC 850 English URM 2 EA Interested Other Than Small Businesses and Small Businesses including VetCert-certified VOSBs and SDVOSBs are required to submit an e-mail delineating: Qualifications, capabilities, and experience for providing this product; Business size/Socioeconomic status; Manufacture location; If the product is on the Federal Supply Schedule or the Open Market; and Memo or correspondence which authorizes distributor to distribute the manufacturer s products (if applicable). This is not a Request for Proposal or an announcement of a solicitation and no solicitation currently exists. Your responses will be used solely for market research purposes of the Government. The Government will not pay for any materials provided in response to this notice and submissions will not be returned to the sender. VOSBs and SDVOSBs must be registered and verified in VetCert for set-aside consideration. Responses are to be submitted by e-mail to Patrick Trzeciak at patrick.trzeciak@va.gov. The information requested must be received no later than 3:00 p.m. CDT on 11/06/2026.
-Market Research11/06/2026
-Awarded10/25/2022

Additional Details

Solicitation Number

36C25222Q0002

Archive Date

Jul 24, 2021

Office Address

MILWAUKEE, WI, 53214