GovChime
Notice ID: b48f8889a8ee4f98bcae6375d00383b3Award NoticeAwarded

4240--537-23-1-5176-0004 Battle Steel Level IIIA 4'x6' Ballistic Blanket Black/Coyote (VA-23-00024911)

Awarded on September 21, 2023. Full description on SAM.gov.

Awarded tounder 36C25223P1177 (source: SAM.gov award notice)• $227.7K

Overview

Posted
September 20, 2023
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of Veterans Affairs

Notice details

Place of performance
Jesse Brown VAMC Department of Veterans Affairs 820 S Damen Ave, Chicago, IL, 60612
Last updated
Sep 9, 2025
Award date
Sep 21, 2023
Award amount (SAM.gov award notice)
$227.7K

Identifiers

Solicitation number
36C25223Q0933
Notice ID
b48f8889a8ee4f98bcae6375d00383b3
Award number (PIID)
36C25223P1177

Description

Effective Date: 02/01/2022 Page 14 of 14 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-08 (effective 10/28/2022). This solicitation is set-aside for Small Businesses. The associated North American Industrial Classification System (NAICS) code for this procurement is 339113PA, Protective Apparel, with a small business size standard of 800 employees. The FSC/PSC is 4240, Safety and Rescue Equipment. Requirement The Jesse Brown VA Medical Center (VAMC), Police Services, located at 820 S. Damen Avenue, Chicago, IL 60612-4223 is seeking to purchase a USA or American Trade agreement product that meets the specifications of the 300 Battle Steel Level IIIA 4FT x 6FT Ballistic Blankets. The Government intends to award a firm fixed-price purchase order to the quoter offering the lowest prices technically acceptable quote. Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. All interested contractors shall provide quotations for the following: Line Item Description Part Number Qty Total Price 1 Battle Steel Level IIIA 4'x6' Ballistic Blanket Black/Coyote BattleSteel-BBIIIA- 300 Total Cost The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services (NOV 2021) Refer to Attachment 1 ADDENDUM to FAR 52.212-1 FAR 52.204-7, System for Award Management (OCT 2018) FAR 52.204-16, Commercial and Government Entity Code Reporting (AUG 2020) FAR 52.211-6, Brand Name or Equal (AUG 1999) FAR 52.214-21, Descriptive Literature (APR 2002) FAR 52.225-2, Buy American Certificate (OCT 2022) End of Addendum to 52.212-1 FAR 52.212-3, Offerors Representations and Certifications Commercial Items Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Items (NOV 2021) Addendum to FAR 52.212-4 FAR 52.204-13, System for Award Management Maintenance (OCT 2018) FAR 52.204-18, Commercial and Government Entity Code Maintenance (AUG 2020) FAR 52.227-19, Commercial Computer Software-Restricted Rights (DEC 2007) FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (NOV 2021) (DEVIATION AUG 2020) VAAR 852.211-72, Technical Industry Standards (NOV 2018) VAAR 852.212-70, Provisions and Clauses Applicable to VA Acquisition of Commercial Items (APR 2020) VAAR 852.203-70, Commercial Advertising VAAR 852.211-70, Equipment Operations and Maintenance Manuals VAAR 852.232-72, Electronic Submission of Payment Requests VAAR 852.246-71, Rejected Goods VAAR 852.270-1, Representatives of Contracting Officers VAAR 852.242-71, Administrative Contracting Officer (OCT 2020) VAAR 852.247-71, Delivery Location (OCT 2018) VAAR 852.247-72, Marking Deliverables (OCT 2018) End of Addendum to 52.212-4 FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Products and Commercial Services (OCT 2022) (JUL 2021) (DEVIATION) Refer to attached FAR 52.212-5 for subparagraphs the contractor shall comply with the following clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services. All quoters shall submit the following: Quotation in accordance with addendum to FAR 52.212-1, Instructions to Offerors, Attachment 1: Tailored FAR 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services Authorization letter or other documents from the OEM verifying offeror is an authorized dealer, distributor or reseller Completed Buy American Certificate found at FAR 52.225-2, Buy American Certificate Statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information or reject the terms and conditions of the solicitation may be excluded from consideration. All quotes shall be sent to the Contracting Officer, Erica Grimslid at Erica.Grimslid@va.gov. The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Award will be based upon lowest priced technically acceptable quote in accordance with the Simplified Acquisition Procedures of FAR 13. Responses should contain your best terms, conditions. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoters shall list exception(s) and rationale for the exception(s), if any. Submission of your response shall be received not later than 5:00pm on September 08, 2023. Responses should be sent to the Contracting Officer, Erica Grimslid at Erica.Grimslid@va.gov. Hand delivered responses will not be accepted. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact Erica Grimslid Contracting Officer Network Contracting Office 12 Erica.Grimslid@va.gov

Full description on SAM.gov

Award Overview

Award Number

36C25223P1177

Award Amount (SAM.gov award notice)

$227.7K

Award Date

Sep 21, 2023

Awardee

Awardee UEI

XTMDNKLLLB33

Original Solicitation

Notice ID: b48f8889a8ee4f98bcae6375d00383b3

Posted Date: Sep 20, 2023

Original Response Deadline: Not specified

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C25223Q0933
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. 2×
    Combined SynopsisAug 29, 2023

    4240--Battle Steel Level IIIA 4FT x 6FT Ballistic Blanket

    Notice a3c37c5b5e7c448281512457af39587e on SAM.gov

  2. AwardedCurrentSep 20, 2023

    4240--537-23-1-5176-0004 Battle Steel Level IIIA 4'x6' Ballistic Blanket Black/Coyote (VA-23-00024911)

    Notice b48f8889a8ee4f98bcae6375d00383b3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
-Combined Synopsis10/30/2026
-AwardedOpen
Revision: 01 Effective Date: 11/15/2024 Acquisition ID#36C252-27-AP-0957 Page 1 of 2 Please note that this is not a request for proposal nor a request for quote as there is no solicitation document available. Therefore, this is a notice of intent issued by the Department of Veterans Affairs to negotiate a limited source contract with Iramed Corporation. DEPARTMENT OF VETERANS AFFAIRS Justification for Single Source Awards RFO FAR 12.102 For Over Micro-Purchase Threshold but Not Exceeding the SAT ($250K) Acquisition Plan Action ID: 36C252-27-AP-0957 Contracting Activity US Department of Veterans Affairs Great Lakes Acquisition Center (GLAC) VISN 12 115 S. 84th Street Milwaukee, WI 53214 2237: 556-27-1-2993-0011 Brief Description of Supplies/ Services required and the intended use/Estimated Amount: The Captain James A. Lovell Federal Healthcare Center (FHCC), Building 556, Nursing Services, is requesting the acquisition of one MRI-compatible IV infusion pump system for the Intensive Care Unit (ICU). MRI-compatible infusion pumps are medically necessary for ICU patients who require continuous vasoactive or sedative titratable infusions while undergoing magnetic resonance imaging (MRI) to support the diagnosis and evaluation of complex disease processes. Estimated Amount: $105,270.20 Unique characteristics that limit availability to only one source, with the reason no other supplies or services can be used: The availability of this equipment will enable FHCC to perform medically necessary MRI examinations on-site, reducing the need to transfer patients to outside facilities. Currently, these patients are often taken for CT scans; however, CT imaging may not provide the comprehensive diagnostic information required for certain conditions Standardization and compatibility with the MRI IV infusion equipment currently installed at the facility are essential requirements for this acquisition. The requested system is intended to integrate with the existing equipment and support established clinical workflows, training, maintenance, and operational procedures. Substituting products from another manufacturer could result in incompatibility, require additional accessories or system modifications, necessitate staff retraining, and increase costs to the facility. Therefore, procurement of the compatible MRI IV Infusion Pump System is justified to maintain system continuity, operational efficiency, and patient-care capabilities. Description of market research conducted and results or statement why it was not conducted: Market Research Findings: An SBA.gov search under NAICS code 339112 identified zero (5) SDVOSBs and (13) VOSBs. Two additional searches were conducted on sba.gov by combining NAICS code 339112 with the keywords Quad Non-Magnetic IV Pump System and Non-Magnetic IV Pump System and applying specific filters for SDVOSBs and VOSBs. Both searches yielded zero (0) results. A search on GSA Advantage using the keywords Non-Magnetic IV Pump System produced several results that does not appear to meet the requirement. The Contracting Officer (CO) searched Google.com using the keywords Non-Magnetic IV Pump System and identified several vendors, including BD, BioSpace, Hospital & Healthcare management, Iradimed, InMed, MDPI, and Ivenix. Although several alternative vendors were identified, their products are not compatible with the MRI IV infusion equipment currently installed at the facility. Standardization and compatibility are essential requirements for this acquisition. The requested system is designed to integrate with the existing equipment and support established clinical workflows, training, maintenance, and operational procedures. Substituting products from another manufacturer could lead to compatibility issues, require additional accessories or system modifications, necessitate staff retraining, and increase facility costs. Therefore, procuring the compatible MRI IV infusion pump system is justified to ensure system continuity, operational efficiency, and uninterrupted patient-care capabilities. CO received a letter of authorization from the vendor that certifies Iradimed Corporation is the sole manufacturer and authorized seller of the MRidium 3870 MRI Infusion System and its accessories. Due to proprietary considerations, Iradimed Corporation is also the exclusive source for replacement parts for the MRidium MRI Infusion Pump System. The MRidium 3870 MRI Infusion System is the only nonmagnetic, MRI-compatible IV infusion pump currently available on the market. Contracting Officer's Certification: Purchase is approved in accordance with RFO FAR 12.102. I certify that the foregoing justification is accurate and complete to the best of my knowledge and belief. Vernise L. Newton Contracting Officer
-Special Notice11/17/2026
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTE. The NCO 12, Great Lakes Acquisition Center, 115 S. 84th Street, Suite 101, Milwaukee, WI 53214, is performing market research to determine if there is a sufficient number of qualified: (1) Service Disabled Veteran Owned Small Business (SDVOSB); (2) Veteran Owned Small Business (VOSB); or (3) Small or emerging small business firms, or (4) Other Than Small business firms, to provide Humidifier Heater base, Humidifier Sensor Cartridge, and Humidifier Expiratory Heater to the , Captain James A. Lovell Federal Health Care Center in North Chicago, IL. General Requirements: Brand Name or Equal The below products are known to meet the governments needs all equal parts will be considered. 950 Humidifier Heater base, 950 Humidifier Sensor Cartridge, and 950 Humidifier Expiratory Heater Wire Adapter or Equal Salient Characteristics: Therapy Profiles: Must support Invasive ventilation Must support Noninvasive ventilation Must support Nasal High Flow therapy. Temperature Probes: Must have no external temperature probes Must incorporate internal temperature probes that do not require special disinfection processing Circuit Compatibility: Must be compatible with single heated circuits for non-invasive ventilation. Must be compatible with double heated circuits for invasive ventilation. User Interface: Must have a simple user interface Must include touch screen monitors to create setting modifications Must allow mode changes Must allow comfort setting adjustments Must display and troubleshoot alarms Must provide access to Information and Service menus Alarms: Must have built-in alarms for various conditions including but not limited to: 1. High Temperature alarms 2. Low Temperature alarms 3. Water Out alarms 4. Circuit Disconnect alarms 5. Reverse Gas Flow alarms 6. System check alarms Compatibility: Must be compatible with all ventilation and gas flow delivery devices that is currently used at FHCC, Specifically, must be compatible with Medtronic 980 ventilators Specifically, must be compatible with Philips V60 BiPAP devices Specifically, must be compatible with Nihon Kohden 330, 440, and 550 ventilator systems All interested firms who can meet the requirements stated above should respond, in writing, INCLUDING ALL THE FOLLOWING: Company name. Address. Point of contact (name/title/telephone number/e-mail address). FSS / SEWP Contract number, if applicable. SAM Unique ID number. Tax ID number. Indication of which business category (SDVOSB, VOSB, Small Business or Other Than Small Business) for which the organization qualifies. A capability statement that addresses the organizations qualifications and ability to provide the requirement depicted above. Documentation from manufacturer (i.e. correspondence from manufacturer) of your firm being an authorized distributor for the manufacturer. Submit responses to the Contracting Specialist, Ryan Nugent, at Ryan.Nugent@va.gov no later than 8:00 AM (Central Standard Time), 23 November 2026. 36C25227Q0090 950 Humidifier Heaterbase shall be referenced on all correspondence regarding this announcement. TELEPHONIC INQUIRIES WILL NOT BE ACCEPTED. The NAICS Code 339112, Surgical and Medical Instrument Manufacturing, is applicable to this acquisition; the size standard is 1,000 employees. Interested firms are reminded that in accordance with FAR 4.12, prospective contractors shall complete electronic annual representations and certifications in conjunction with FAR 4.11 required registration in the Systems for Award Management (SAM) database prior to award of a contract. The Government will use responses to this notice to make an appropriate acquisition decision. This is the only notice; no other copies of this notice will be provided.
-Market Research11/23/2026
This Sources Sought Notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government at this time. This notice is intended strictly for market research. The purpose of this Sources Sought notice is to determine interest and capability of Other than Small Businesses and Small Businesses, including VetCert-certified Veteran-Owned Small Business (VOSB) or Service-Disabled Veteran-Owned Small Business (SDVOSB). The William S. Middleton Memorial Veterans Hospital in Madison, WI has the requirement for a brand name GE Healthcare TEC 850 Anesthesia Vaporizers. The Government is requesting that Other Than Small Businesses and Small Businesses, including VetCert-certified VOSB or SDVOSB sources respond if it can meet the description below on a brand name only basis (GE Healthcare TEC 850 Anesthesia Vaporizers): CLIN Item Description Qty Unit 0001 1177-9850-SEV TEC 850 Sevoflurane Vaporizer 3 EA 0002 1177-8350-000 TEC 850 SEVO Calibrated Assembly 3 EA 0003 M7209012 Easy-Fil Sevoflurance Filler 3 EA 0004 M7209024 TEC 850 SEVO GE 3 EA 0005 2106572-003 Easy-fil Bottle Adapter, Sevoflurane 3 EA 0006 2095452-001 TEC 850 English URM 3 EA 0007 1177-9850-ISO TEC 850 Isoflurane Vaporizer 2 EA 0008 1177-8150-000 TEC 850 ISO Calibrated Assembly 2 EA 0009 M7209011 EASY-FIL Isoflurance Filler 2 EA 0010 M7209022 TEC 850 ISO GE 2 EA 0011 2106572-001 Easy-fil Bottle Adapter, Isoflurane 2 EA 0012 2095452-001 TEC 850 English URM 2 EA Interested Other Than Small Businesses and Small Businesses including VetCert-certified VOSBs and SDVOSBs are required to submit an e-mail delineating: Qualifications, capabilities, and experience for providing this product; Business size/Socioeconomic status; Manufacture location; If the product is on the Federal Supply Schedule or the Open Market; and Memo or correspondence which authorizes distributor to distribute the manufacturer s products (if applicable). This is not a Request for Proposal or an announcement of a solicitation and no solicitation currently exists. Your responses will be used solely for market research purposes of the Government. The Government will not pay for any materials provided in response to this notice and submissions will not be returned to the sender. VOSBs and SDVOSBs must be registered and verified in VetCert for set-aside consideration. Responses are to be submitted by e-mail to Patrick Trzeciak at patrick.trzeciak@va.gov. The information requested must be received no later than 3:00 p.m. CDT on 11/06/2026.
-Market Research11/06/2026

Additional Details

Solicitation Number

36C25223Q0933

Archive Date

Nov 19, 2023

Office Address

MILWAUKEE, WI, 53214