Notice ID: e76e0e49fb3e4e3693d94e618309ee53Combined Synopsis/SolicitationArchived
6515--CAVHS Medical Air Compressors
Archived on September 2, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM CDT
- Posted
- August 5, 2026
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 339113: Surgical Appliance and Supplies Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Office
- 256-NETWORK CONTRACT OFFICE 16 (36C256)
- Place of performance
- Central Arkansas Veterans Healthcare System 2200 Ft. Roots building 182, North Little Rock, AR, 7211
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 36C25626Q1057
- Notice ID
- e76e0e49fb3e4e3693d94e618309ee53
Description
Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) (FAR) subpart 12.2, Solicitation, Evaluation, and Award as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2026-01 (eff. 03/13/2026) FAR Deviation JAN 2026 (eff. 01/22/2026) VAAR DEVIATION FEB 2026 (eff. 03/17/2026) VAAM Alert 26-02 (eff. 10/28/2025) Acquisition Policy Flash 26-26 eff. 03/17/2026) 4. This solicitation is for the purchase of Medical Air Compressors, and the solicitation number is 36C25626Q1057. This solicitation is unrestricted, and the Government anticipates awarding a firm-fixed price supply order from this solicitation. The associated North American Industrial Classification System (NAICS) code for this procurement is 339113, with a small business size standard of 800 employees. The FSC/PSC is 6515. The Central Arkansas Veterans Healthcare System is seeking to purchase the Medical Air Compressors IAW with attached statement of work. All interested companies shall provide quotations for the following: Supplies/Services: See Section B.2, Cost/Price Schedule Place of Performance/Place of Delivery Address: CAVHS 2200 Fort Roots Drive Building 182 (Warehouse) North Little Rock, Arkansas 72114 Postal Code: 72114 All questions are due by August 12, 2026 12PM CST. All quoters shall submit the following: Quotes should be emailed to joseph.warren@va.gov and received no later than 3:00 PM CST, August 18, 2026. Email subject line shall include, RFQ 36C25626Q1057 Medical Air Compressors . Quotes shall be submitted IAW Provision 52.212-1 Instruction to Offerors. Point of Contact Joseph Warren Contracting Officer joseph.warren@va.gov
Award Overview
Possible prior contract
Inferred, not confirmedInferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.
Contract end date
Jul 31, 2026
NAICS
339113
Agency
Department of Veterans Affairs
Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.
Contacts
Contracting Officer
Primary Contact
Documents
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
6515--CAVHS Medical Air Compressors
Other notices for this solicitation
- Market ResearchRelated noticeJul 14, 2026
6515--CAVHS Medical Air Compressors
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded. | 83% | Combined Synopsis | 10/30/2026 |
80% | Awarded | Open | |
Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format Revolutionary FAR Overhaul (RFO) in Federal Acquisition Regulation (FAR) subpart 12.202, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular, FAC Number 2026-01, effective date 03/13/2026. This solicitation is set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The associated North American Industrial Classification System (NAICS) code for this procurement is 339113, with a small business size standard of 800 employees. The FSC/PSC is 6515. Objective: The Department of Veterans Affairs (VA), VISN 02 Network Contracting Office, is seeking sources that can provide FIVE (5) Smart Hospital Stretchers that at a minimum meets the following salient characteristics: Smart, versatile hospital stretchers designed for fall prevention, patient comfort, in-stretcher procedures, and clinician support across emergency, perioperative, and transport settings. Chair Position, 19" Low Height 1-Touch Siderail Release Zero Transfer Gap OB/Pelvic Position Solution Integrated O2 Solution, 32" Wide Surface Phone & Urinal Holders Head-Of-Bed Angle Display 700 lb. Safe Working Load 3/4" Standard IV Pole Sockets 6 Transport Strap Locations Full Trend and Reverse Trend 4-Corner Brake and Steer 2 Foldable Transport Handles 8" Tente Carpet Casters Pneumatic Head & Knee Section Standard Two-Year Warranty Included Options: Accumax Surface 32x76x5 Intellidrive Electric Hi-Lo Height Integrated Scale Power Plug: NEMA5-15P (US) USB Port Enhanced 3-Mode Bed Exit Electric Patient Controls Coiled Power Cord SafeView®+ w/ IllumiGuide Permanent IV Pole Horizontal O2 Tank Holder English Language Labels SafeView+ Visual Indicators: At-a-glance status lights displaying bed-exit status, battery level, and lowest position. Three-Mode Bed-Exit System: Features silence, auto-reset (auto-rearm), or verbal prompts, with optional integration to Voalte Nurse Call and EMR systems. Low Deck Height: Drops down to a 19-inch low height to help mitigate patient falls and ease entry/exit. Articulations & Handling: Electric or manual high/low adjustment, head/foot articulation, Trendelenburg/reverse Trendelenburg controls, and low-effort steering. Contractor will provide technical support, equipment maintenance, and device repair for smart stretchers. Warranty shall be for a three (3) year period covering on-site repairs & preventive maintenance by certified technician. The Contractor shall delivery the items within thirty (30) days after award. Place of Delivery: Items to be delivered to the Castle Point VA Medical Center: Castle Point VA Medical Center 41 Castle Point Road Wappingers Falls, NY 12590-7004 * An individual NMR waiver has been approved for this solicitation. The full text of FAR provisions or clauses may be accessed electronically at http://www.va.gov/oal/library/vaar/index.asp (VAAR) https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52#FAR_52_252_2 (FAR OVERHAUL) The following solicitation provisions and clause apply to this acquisition: 52.203-17 Contractor Employee Whistleblower Rights. (NOV 2023) 52.204-7 System for Award Management Registration, with Alternate I (OCT 2018) (DEVIATION NOV 2025) 52.204-13 System for Award Management-Maintenance (OCT 2018) (DEVIATION NOV 2025) 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate (NOV 2023) (DEVIATION 2025) with Alternate II (JAN 2025) 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (MAR 2026) (DEVIATION NOV 2025) 52.222-36 Equal Opportunity for Workers with Disabilities. (JUN 2020) (DEVIATION NOV 2025) 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (DEC 2010) (DEVIATION NOV 2025) 852.219-73 VA Notice to Total Set-Aside for Certified Service-Disabled Veteran-Owned Small Businesses (JAN 2023) (DEVIATION) 852.219-76 VA Notice of Limitations on Subcontracting Certificate of Compliance for Supplies and Products. 852.232-72 Electronic Submission of Payment Requests (NOV 2018). 852.239-76 Information and Technology Accessibility (FEB 2023). FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services (SEP 2023) (DEVIATION AUG 2025). (a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include (1) The solicitation number; (2) The name, address, telephone number of the Offeror; (3) The Offeror s Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator; (4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation; (5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and (6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments. (b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (c) Late submissions, modifications, revisions, and withdrawals of offers. (1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation. (2) Any offer, modification, or revision received after the time specified for receipt of offers is late and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted. (3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (4) Offerors may withdraw their offers by written notice to the Government received at any time before award. (d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror s initial offer should contain the Offeror s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received. (e) Debriefings. If a post award debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable: (1) The agency s evaluation of the significant weak or deficient factors in the debriefed Offeror s offer. (2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror. (3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award. (5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror. (6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities. (End of provision) FAR 52.222-90 Addressing DEI Discrimination by Federal Contractors. As prescribed in 22.2203, insert the following clause: Addressing DEI Discrimination by Federal Contractors (Deviation DATE) (a) Definitions. As used in this clause Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor. Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources. (b) In connection with the performance of work under this contract, the Contractor agrees as follows: (1) The Contractor will not engage in any racially discriminatory DEI activities; (2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause; (3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts; (4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and (5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause. (6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4). (c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States. (End of clause) *The Government will not consider offers for award from offerors that do not provide the Buy American certification with their bid, quotation, or proposal, and all such responses will be deemed ineligible for evaluation and award. Certificate must be filled out, signed, and submitted with proposal. *The Government will not consider offers for award from offerors that do not provide the Limitations of Subcontracting document with their bid, quotation, or proposal, and all such responses will be deemed ineligible for evaluation and award. Document must be filled out, signed, and submitted with proposal. 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Certificate. As prescribed in 25.1101 (b)(2)(i), insert the following provision: Buy American-Free Trade Agreements-Israeli Trade Act Certificate (NOV 2023) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) or (c)(1) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(2) of this provision contains a critical component. (2) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (b) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin [List as necessary] (c) (1) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . Other Foreign End Products: Line Item No. Country of Origin Exceeds 55% domestic content (Y/N) [List as necessary] (2) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) Alternate I [Reserved] Alternate II (Jan 2025). As prescribed in 25.1101 (b)(2)(ii), substitute the following paragraph (b) for paragraph (b) of the basic provision: (b) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled Buy American Free Trade Agreements Israeli Trade Act . Israeli End Products: Line Item No. [List as necessary] Alternate III (Jan 2025). As prescribed in 25.1101 (b)(2)(iii), substitute the following paragraph (b) for paragraph (b) of the basic provision: (b) The Offeror certifies that the following supplies are Korean end products or Israeli end products as defined in the clause of this solicitation entitled Buy American Free Trade Agreements Israeli Trade Act . Korean End Products or Israeli End Products: Line Item No. Country of Origin [List as necessary] (End of provision) VAAR 852.219-76 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (JAN 2023) (DEVIATION) As prescribed in 819.7011(c), insert the following clause. The contracting officer shall tailor the clause in paragraph (a)(2)(iii) as appropriate: (a)Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Offeror check the appropriate box] (i) [ ] In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), it will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (ii) [ ] In the case of a contract for supplies from a nonmanufacturer, it will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) is granted. The offeror understands that, as provided in 13 CFR 121.406(b)(7), such a waiver has no effect on requirements external to the Small Business Act, such as the Buy American Act or the Trade Agreements Act. (2) Manufacturer or nonmanufacturer representation and certification. [Offeror fill-in check each applicable box below. The offeror must select the applicable provision below, identifying itself as either a manufacturer or nonmanufacturer]: (i) [ ] Manufacturer or producer. The offeror certifies that it is the manufacturer or producer of the end item being procured, and the end item is manufactured or produced in the United States, in accordance with paragraph (a)(1)(i). (ii) [ ] Nonmanufacturer. The offeror certifies that it qualifies as a nonmanufacturer in accordance with the requirements of 13 CFR 121.406(b) and paragraph (a)(1)(ii).The offeror further certifies it meets each element below as required in order to qualify as a nonmanufacturer. [Offeror fill-in check each box below.] [ ] The offeror certifies that it does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS code 541519, which is found at 13 CFR 121.201, footnote 18). [ ] The offeror certifies that it is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied. [ ] The offeror certifies that it will take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice. (iii) [ ] The offeror certifies that it will supply the end item of a small business manufacturer, processor, or producer made in the United States, unless a waiver as provided in 13 CFR 121.406(b)(5) has been issued by SBA. [ ] If this is a multiple item acquisition, the offeror certifies that at least 50% of the estimated contract value is composed of items that are manufactured by small business concerns. (3) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (4) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee; (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating 18 U.S.C. 1001. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract or to determine whether the offeror qualifies as a manufacturer or nonmanufacturer in compliance with the limitations on subcontracting requirement. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c)The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror s bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification: I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee:________________________________________ Printed Title of Signee:_________________________________________ Signature:___________________________________________________ Date:_______________________________________________________ Company Name and Address:___________________________________ (End of clause) All quoters shall submit the following: One (1) quote in PDF format One (1) Filled out and signed Limitations on Subcontracting in PDF format One (1) Filled out and signed Buy America Certificate in PDF format. All quotes shall be sent to the Contracting Officer at: Jonatan.Rondon@va.gov Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of RFO FAR 12. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services (NOV 2021) (DEVIATION OCT 2025). (a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered: A comparative evaluation based on price and other factors will be conducted, evaluation factors other than price when combined are significantly more important than price. The Government reserves the right to consider a quotation other than lowest price. The Government reserves the right to select quotations that provides benefits to the Government that exceeds the minimum requirements of the solicitation but is not required to do so. The following factors will be used to evaluate offers: Technical capability of the item offered to meet the Government requirement: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation. Period of Performance with Delivery: Quotations will be evaluated to the extent they can reasonably meet the Government's needs with respect to full project completion from date of award. Price: The Government will evaluate the price by adding the total of all line-item prices, including all options. The Total Evaluated Price will be that sum. (b) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) Submission of your response shall be received not later than November 20th, 2026, at 1600 EST at Jonatan.Rondon@va.gov. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact: Jonatan Rondon Contracting Officer Network Contracting Office (NCO2) Margaret Cochran Corbin VA Campus 423 East 23rd Street, 14045-W New York, NY 10010 212-686-7500 ex. 16490 Jonatan.rondon@va.gov | 75% | Combined Synopsis | 11/20/2026 |
IAW FAR 5.301 This notice is to advise the public that the VHA s Network Contracting Office 21 has awarded a contract action exceeding $25,000.00 for a Surgical Implant. This notice is not a request for competitive quotes. The procurement is classified under the North American Industry Classification System Code (NAICS) 339113. For additional information regarding this action please contact the above POC. | 73% | Awarded | Open |
Sources Sought Notice Sources Sought Notice Sources Sought Notice - RFI Attachment Sources Sought Notice Page 1 or 4 DISCLAIMER: THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS SYNOPSIS IS NOT A REQUEST FOR QUOTE, PROPOSAL, OR BID. This notice is not a solicitation as defined by FAR 2.101, therefore it shall not be construed as a commitment by the government to enter into a contract, nor does it restrict the government to an acquisition approach. All information contained in this Request for Information (RFI) is preliminary as well as subject to amendment and is in no way binding on the government. Information submitted in response to this notice is voluntary; the government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the government. The government is requesting that restrictive or proprietary markings not be used in response to this notice. If a solicitation is released, it will be synopsized in the Federal Contract Opportunities website or General Services Administration (GSA). It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this RFI. 1. Title: Shukla Universal Screw Extraction Systems (Brand Name or Equal) 2. Purpose: The Department of Veterans Affairs (VA), Network Contracting Office 16, is conducting market research to identify qualified sources capable of furnishing the brand-name items listed below or equal products for the Michael E. DeBakey VA Medical Center, Houston, Texas. This notice is issued for planning purposes only and is not a solicitation, request for quotation, invitation for bid, or promise of a future procurement. The Government will not pay for information submitted in response to this notice. The Operative Care Line requires orthopedic extraction and removal systems used in trauma, total joint, spine, shoulder, and related surgical procedures. The current clinical need is to replace existing instrumentation while preserving safe integration with the facility s established surgical workflows and currently owned Shukla Medical sets. Item Brand-Name Reference Description Qty/Unit 1 S9MAXI-TR Extraction System, Trauma Maxi 1 EA 2 S9MINI Removal System, Screw, Mini, Small Bone Screw V4 2 EA 3 S9SCREW Removal System, Screw, Broken & Stripped V3; extractors, 4 each; drill bits, 2 each 1 EA 4 S9KNEE Extraction System, Knee 1 EA 5 S9BLADE Blade System, Osteotome 2 EA 6 S9HIP Extraction System, Hip Stem 1 EA 7 S9SPINE-PLUS Removal System, Spine, Cervical, Thoracic, and Lumbar; includes two instrument trays V4 1 EA 8 S9SHLDR Extraction System, Shoulder 1 EA 9 S9SHLDR-BLADE Blade System, Shoulder, Flexible Osteotome 1 EA 3. Minimum Salient Characteristics for Equal Products: Provide complete, procedure-ready systems that perform the same clinical function as each corresponding brand-name reference item. Include the specialized drivers, extractors, drill bits, osteotomes, handles, adapters, and organization/sterilization trays ordinarily required for the identified system s intended surgical use. Be designed for precision removal and, where applicable, insertion of orthopedic hardware, including large bone screws and broken or stripped screws. For the spine system, support cervical, thoracic, and lumbar applications and include two instrument trays. For shoulder and osteotome systems, provide instrumentation suitable for the stated shoulder extraction or flexible osteotome function. Be compatible with the medical center s existing instruments, trays, sterilization processes, and clinical workflow without requiring undocumented adapters, modifications, or additional capital equipment. The respondent shall identify any exceptions or additional items required for full functionality. Be reusable surgical-grade instrumentation and capable of cleaning, disinfection, and steam sterilization consistent with VA facility practices. Provide the manufacturer s validated reprocessing and sterilization instructions. Be supplied new, not used or refurbished, with product labeling, instructions for use, and applicable warranty and support information. Be commercially available and compliant with all applicable FDA requirements for the offered intended use. Respondents shall identify the applicable clearance, listing, registration, or exemption status. The Small Business Administration (SBA) size standard for the North American Industry Classification System (NAICS) code is 339113 Surgical Appliance and Supplies Manufacturing with a size standard of 800 employees. Product Supply Code (PSC) 6515 Medical and Surgical Instruments, Equipment, and Supplies. The anticipated type of contract shall be a Single Award, Firm Fixed Price. 3. Responses Requested: The following questions must be answered in response to this RFI. Answers that are not provided shall be considered non-responsive to the RFI: Name of potential Contractor that possess the capability to fulfill this requirement. Contractors shall also provide the following: Point(s) of contact name: _______________________________________________ Address: ____________________________________________________ Telephone number: ___________________________________________ Email address: _______________________________________________ UEI #: ____________________________________ CAGE Code: _______________________________ Is your company considered a small business concern, SB, SDVOSB, VOSB, HUBZone, or 8A concern, with the requisite NAICS code identified above? Can your company provide training as outlined in the attached SOW? Is your company available under any Government Wide Agency Contract (GWAC), Solutions for Enterprise-Wide Procurement (SEWP), National Acquisition Center (NAC), GSA Schedule, Federal Supply Schedule (FSS), Indefinite Delivery Indefinite Quantity (IDIQ), and/or Blanket Purchase Agreement (BPA)? The VA does not accept grey market items; therefore, the Vendor must attach an Authorized Distribution Letter as an approved and authorized vendor on OEM letterhead by the manufacturer as evidence of proof to be viewed by the government to be considered as part of the Market Research and responsiveness to this Sources Sought notice. 4. Opportunity/Market Pricing: The MEDVAMC is seeking information from potential vendors on their ability to provide the required items/equipment. THIS IS A SOURCES SOUGHT REQUEST FOR INFORMATION (RFI) ONLY. Small Business concerns are encouraged to provide responses to this RFI in order to assist the MEDVAMC in determining potential levels of competition and general market pricing available in the industry. Vendors are requested to submit estimated market research pricing along with their responses to the above. The estimated pricing will be considered when determining the procurement strategy for the forthcoming solicitation. 5. RFI responses are due by 3:00pm Central Time by close date listed above The subject line shall reference that Request for Information (RFI) number above. NO SOLICITATION EXISTS AT THIS TIME. Please provide the information you deem relevant in order to respond to the specific inquiries of the RFI. Information provided will be used solely by MEDVAMC as Market Research and will not be released outside of the MEDVAMC Purchasing and Contracting Team. If no responses to this notice are received from an authorized distributor of the cited brand name items listed above, then this action will be sole sourced to the manufacturer. 6. Contact Information: Contract Specialist Robert (Dustan) Arabie robert.arabie@va.gov Your response to this notice is greatly appreciated! | 73% | Market Research | 11/12/2026 |
Additional Details
Solicitation Number
36C25626Q1057
Archive Date
Sep 2, 2026
Office Address
RIDGELAND, MS, 39157