GovChime
Notice ID: 0928cd3c4a0d3419e3e8df85421b8c08Sources Sought

J--Ziehm C-arm Preventative Maintenance

Archived on August 18, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 AM UTC−05:00
Posted
June 5, 2019
Notice type
Sources Sought

Notice details

Office
NETWORK CONTRACT OFFICE 19 (36C259)
Place of performance
VA Medical Center;921 NE 13th. St.;Oklahoma City, Ok 73104-5007 73104-5007 USA
PSC
J: MAINT, REPAIR, REBUILD EQUIPMENT
Last updated
Dec 3, 2025

Identifiers

Solicitation number
36C25919Q0312
Notice ID
0928cd3c4a0d3419e3e8df85421b8c08

Description

Performance Work Statement (PWS) Preventive Maintenance and Repair on Ziehm Vision RFD 3D C-ARM Department of Veterans Affairs (VA) Veterans Health Administration (VHA) PURPOSE: Veterans Affairs requires a contractor to provide annual Preventive Maintenance (PM), and Repair Support Services, on an as-needed basis, for the Ziehm Vision RFD C-arm at the Oklahoma VA Health Care System. Services are to be performed in accordance with this PWS and to OEM standards, with the intent of ensuring the equipment operates as the original manufacturer intended, uninterrupted (95% uptime), with the latest updates, in a cost-effective, efficient manner, contributing to the VA Mission. Services are required on the government-owned equipment listed in this PWS for the period of performance and at the location outlined in this PWS. This Contract will be a non-personal services contract. The Contractor, its employees, agents and subcontractors shall not be considered government employees for any purpose. Contractor shall furnish all labor, materials, parts, equipment, tools, transportation, and supervision to provide services in accordance with this Performance Work Statement (PWS). Period of Performance: refer to the Price/Schedule or page 1 of this contract, SF 1449 Location of performance: refer to page 1 of this contract, SF 1449 BACKGROUND: Equipment: The VA owned Ziehm Vision RFD 3D C-arm is used for image guided surgery and imaging in the Operating Rooms at the VA Medical Center. The following pieces of equipment require service under this contract: Equipment Description Brand & Model Original Equipment Manufacturer (OEM) Serial Number VA PMI Number C-arm Ziehm Vision RFD 3D Ziehm 21159 68502 SUMMARY OF REQUIREMENTS Contractor shall provide OEM-trained technicians to perform OEM-standard services on equipment in this PWS. Services on the equipment include maintenance support, corrective maintenance repair, 24x7 emergency phone support, provision of parts (comprehensive parts coverage), and service and modification as required due to safety or reliability. All OEM software updates shall be included. The scheduled month for annual preventative maintenance shall be November. Tasks and Requirements Performance and Repairs: All work performed shall be in accordance with manufacturer s specifications, including but not limited to: adjustments, calibrating, cleaning, lubricating, testing, disassembly, checkout, replacement of parts, etc. required to keep the equipment in operating condition. Contractor must guarantee 95% up time for the equipment. Contractor shall guarantee that all equipment covered by this contract shall be in optimum working condition at the completion of each contracted Period of Performance. Contractor will make every attempt to maintain and repair equipment on-site within a reasonable time, unless local environment prohibits on-site attendance. Failing this, contractor will provide substitute equipment in the event a repair continues beyond the reasonable time frame. A reasonable time frame ensures the VA mission continues uninterrupted with no loss, damage or suffering to VA patients and resources. Preventive Maintenance: Contractor shall provide annual preventive maintenance service on equipment, in scheduled month of each contracted Period of all work between Standard Business Hours, weekend hours, and non-standard hours, and arranged through the COR. The contractor shall work with the COR and Surgery service to not disrupt patient care by scheduling PM visits in advance. The visits will include equipment verification by an OEM-trained technician. Before the expiration of each period of performance, the contractor shall provide the COR with a report certifying the equipment listed in this PWS has been calibrated to O.E.M. standards not less than annually during the contract period. All parts shall be O.E.M. standard or certified. Service Call: Unscheduled service should be conducted at no additional cost during standard business hours, Monday through Friday, 8:00 AM 5:00 PM. Non-emergency service (machine still able to run with no increased patient risk) should be available, with a technician onsite at location, within 48 hours notice from the COR. If support call for repair service is deemed mission-critical, contractor will be on-site performing corrective action response to service calls within 24 hours of notice from COR, barring special circumstances. 24 hour service call center support should be available to schedule corrective service calls. Technical phone support shall be available weekdays from 7:00 AM 7:00 PM at no additional charge. Software Updates: Contractor shall provide any software updates, as they become available, for all equipment, at no additional cost. All software changes made become the property of the VA. Help Desk Support: Contractor shall provide emergency telephone support during Standard Business Hours, as a minimum at no additional charge, with phone calls returned no later than 2 hours after a voice message has been left by the COR. Modifications: If contractor or external hazard assessment/notification by the FDA, NCPS, or CEOSH determines that a modification is necessary to address safety concerns or reliability, installation and modification will be performed at no additional charge. Parts: As part of the OEM-standard of service required on this contract, contractor must provide unique and/or high mortality replacement parts. All parts will be O.E.M. recommended parts. Shipment: Contractor shall be responsible for shipment of repair parts and substitute equipment at no expense to the government, with FOB destination terms applicable in these circumstances, and in favor of the VA Medical Center at this location. GOVERNMENT FURNISHED EQUIPMENT / PROPERTY (GFE / GFP) Government Property is any real property at the VAMC accessed by the Contractor in the performance of services in accordance with the PWS. Condition of Equipment The Contractor shall accept responsibility for the equipment in "as is" condition. Failure to inspect the equipment prior to contract award shall not relieve the Contractor from performance of the requirements of this contract. Storage Storage for Contractor equipment is not provided at the VAMC. The Contractor is responsible for the security of its equipment. The Government is not responsible for the security of Contractor equipment. CONTRACTOR FURNISHED EQUIPMENT / PROPERTY (CFE / CFP) Service Manuals/Tools/Equipment The VAMC shall not provide tools, (test) equipment, service manuals or service diagnostic software to the contractor. The contractor shall obtain, have on file, and make available to its FSE's all operational and technical documentation (such as; operational and service manuals, schematics, and parts list) which are necessary to meet the performance requirements of this contract. The location and listing of the service data manuals, by name and/or the manuals themselves shall be provided to the CO upon request. QUALITY Conformance Standards Contractor shall ensure that their services, staff and equipment used in the performance of this contract conform and comply with the latest industry service standards, information, guidance, regulations and publications of the following: AAMI-ANSI ST-79:2010 Part 7.7 standards (Servicing and Repairs of Devices in the Health Care Facility). This can be obtained at http://www.aami.org/publications/standards/st79.html IAHCSMM - International Association of Healthcare Central Service Materiel Management US FDA US Food and Drug Administration CDC Centers for Disease Control and Prevention CDRH Center for Devices and Radiological Health ISO (As a minimum: ISO 9001:2008 Certification and ISO 13485:2003 certification (medical devices)) ASQ American Society for Quality UL Underwriters Laboratories OSHA Occupational Safety and Health Administration Safety The Contractor must perform services in accordance with: local, state and federal Occupational Safety and Health guidelines and legislation, to include Occupational Safety and Health Administration (OSHA), the American National Standards Institute (ANSI) safety guidelines, and any VA Medical Center Directives; local, state and federal Fire and Safety legislation and guidelines, to include VA Medical Center directives and legislation on Fire and Safety; all other Conformance Standards identified in this PWS Medical Center Policies Each VA Medical Center has policies that are updated from time to time. The COR can provide more detailed information to the contractor of these upon commencement of the contract and throughout the term of the contract, as needed, especially policies regarding, parking, possession of weapons, cell phone use and photography as well as smoking on VA property. Violations of such policies may result in individual fines or citation answerable in the United States (Federal) District Court. Remedy or Rework Rework or Remedy is defined as performing the Service again until the Purpose of this PWS is achieved in full. This involves less than Satisfactory Service by the Contractor and as noted by the COR. Rework or Remedy must occur within 3 business days of the notice of the rework or remedy requirement from the COR and at no additional cost to the Government. Inspection and Acceptance of Services: The Government reserves the right to inspect and test services in accordance with this PWS and the Contract. The only individual authorized to officially accept services is the COR. While inspection of services may be delegated by the COR and a shared responsibility with departmental management staff, the COR is ultimately the only authorized individual to approve and accept services on behalf of the VA. DELIVERABLES (refer also to Technical Qualification and Contact Points for additional Deliverables) Service Report (SR) Contractor is responsible for providing Service Reports for every service. A Service Report is required for all: outgoing serviced equipment with an inventory of all equipment collected by the contractor, and incoming serviced equipment with an inventory of all equipment completely serviced and delivered by the contractor and with the Service Report provided to the COR at the time of delivery of serviced equipment. Such documentation shall meet the guidelines as set forth in the Conformance Standards. In addition, each Service Report shall, at a minimum, document the following data legibly and in complete detail: Name of contractor and contract number. Name of Field Technician who performed services. Contractor s Service Report number/log number. Date and time (arrival and departure) of Field Technician on-site at VA collecting and delivering equipment VA purchase order number Description of problem reported by COR. Details of Equipment serviced: Equipment set numbers Device name, instrument type Serial number Any other manufacturer's identification numbers. PMR and Service description Signatures: Field Technician performing services described. COR acceptance signature Service Reports (Engineers Service Report (ESR) or Service Report) When the service is completed, the Field Technician shall document services rendered on a legible Service Report(s). During Check In/Check Out procedures with the COR, the Field Technician must provide the COR with the Service Report(s) for that service visit. ESR can be submitted electronically to the COR, not exceeding 5mb in size, following service completion yet before the Technician departs the location to ensure the COR has an opportunity to review and provide an acceptance signature. All Service Reports shall be submitted to the COR for an "acceptance signature". If the COR is unavailable, a signed copy of the Service Report shall be sent to the Contractor after the work can be reviewed (if requested or noted on the Service Report). The Contractor shall immediately, but no later than 24 (twenty-four) consecutive hours after discovery, notify the COR (in writing) of the existence or the development of any defects in the equipment submitted for service which the Contractor considers he/she is not responsible for under the terms of the contract and where replacement is recommended. TECHNICAL QUALIFICATIONS and PERSONNEL STANDARDS Calibration of Vendor s Equipment: Contractor must provide the COR with certification attesting that all gauging and measurement equipment used to check and calibrate the subject items of equipment has been calibrated either according to the manufacturer s specifications or within the last twelve months against a standard that is traceable to the National Bureau of Standards. Contractor must provide the COR and Contracting Office with such documentation, as a minimum: Within 5 business days of contract award, Within 5 business days after renewal or extension of services in accordance with, and if permitted by applicable FAR clause, and and in advance of commencing services on equipment identified in this PWS. Qualifications of Contractor OEM-Trained Technicians: Contractor shall document, in writing, their experience in working on the identical make and model equipment listed in this PWS as well as the qualifications of individuals who will work on the equipment. Where the PWS requires OEM-trained technicians, demonstration of this will also be required in the documentation. Contractor must provide the COR and Contracting Office with such documentation, as a minimum: Within 5 business days of contract award, Within 5 business days after renewal or extension of services in accordance with, and if permitted by applicable FAR clause, and immediately, when previously assigned OEM-trained technicians have been replaced, and in advance of commencing services on equipment identified in this PWS. The contractor shall have sufficient staff to satisfactorily support this contract, including the PWS and its purpose. Contractor staff providing services on this contract must include a "fully qualified" Filed Service Engineer (FSE) and a "fully qualified" FSE who shall serve as the backup. "Fully Qualified" is based upon training and on experience in the field. For training, the FSE(s) has successfully completed a formalized training program, for the equipment. For field experience, the FSE(s) has a minimum of two years of experience (except for equipment newly on the market) with respect to scheduled and unscheduled preventive and remedial maintenance of the equipment in this contract The FSEs shall be authorized by the Contractor to perform the maintenance services. All work shall be performed by "Fully Qualified" competent FSEs. The Contractor shall provide written assurance of the competency of their personnel and a list of credentials of approved FSEs for each make and model the Contractor services at the VAMC. The CO may authenticate the training requirements, request training certificates or credentials from the Contractor at any time for any personnel who are servicing or installing any VAMC equipment. The CO and/or COR specifically reserve the right to reject any of the Contractor's personnel and refuse them permission to work on the VAMC equipment. If subcontractor(s) are used, they shall be approved by the CO prior to commencement of services. The Contractor shall submit any proposed change in subcontractor(s) to the CO for approval/disapproval. Contractor Employee s On-site At Location: At all times during performance of Services, in accordance with this PWS, the Contractor must ensure Contractor personnel: Be able to function professionally amongst the general public in a hospital and health care environment. Where possible, a warm-natured and humane approach is preferred. Be able to read, understand and apply printed rules, detailed orders, and instructions Be familiar with and compliant with this PWS and Contractual requirements. Be displaying VA Identification badges and Contractor-issued name tags, clearly visible to the general public Be directly and personally escorted by the Contractor s on-site Supervisor when Contractor personnel are not displaying VA Identification badges and Contractor-issued name tags Maintain a neat, clean, professional appearance Be properly attired in Contractor-issued uniforms which clearly display Contractor branding, keeping in accordance with VHA Dress Policies. Compliant with VA Safety and OSHA regulations throughout the VA Medical Center, as well as VA Medical Center policies. Compliant with parking requirements at the VAMC and park only in the designated parking areas as assigned by the COR. Maintain Decorum at all times. During the performance of services care and consideration must be given to VA visitors and staff. All Services must be performed with minimal disturbance or hindrance to VA Medical Center visitors and staff, specifically maintaining the requirements identified in the Overview of this PWS. Contractor shall not be considered government employees for any purpose. SECURITY PROCEDURES AND OPERATING HOURS Check In/Out Procedures Prior to commencement of services, and when visiting the VA Medical Center, the Contractor or Contractor s authorized Field Technician, must check in and out with the COR. Only individual VA Biomedical management staff, as delegated by the COR, can coordinate check in and check out procedures for the Contractor in the absence of the COR. Due to heightened security requirements, the Contractor or their authorized service representative will be required to wear an ID Badge which will be signed for upon arrival and turned in when leaving. All Badges must be worn at or above the waist and facing forward. This Badge must be turned in before leaving the premises; otherwise the person signing for it will be required to pay for the unreturned ID Badge. Standard Business Hours and Federal Holidays: Contract performance shall occur during standard business hours unless approved and arranged through the COR. Standard hospital hours are 8 AM to 5 PM. Contractor must coordinate all services with the COR. The Federal Government observes the following days as holidays. New Year s Day January 1st * Martin Luther King s Birthday Third Monday in January Presidents Day Third Monday in February Memorial Day Last Monday in May Independence Day July 4th * Labor Day First Monday in September Columbus Day Second Monday in October Veterans Day November 11th * Thanksgiving Day Fourth Thursday in November Christmas Day December 25th * *Holidays that fall on Saturday are observed on the preceding Friday. Holidays that fall on Sunday are observed on the following Monday. In addition to the days designated as holidays, the Government observes the following days: Any other day designated by Federal Statute Any other day designated by Executive Order Any other day designated by the President of the United States to be a Federal holiday Contractor holidays not included in the table of government holidays or other observation days listed above shall not be considered official holidays and shall be included in the contract performance as standard business days for the purposes of repairs and maintenance. CONTACT POINTS Contractor Point of Contact (POC) The Contractor shall specify an individual who shall serve as a single point of contact for all contract issues (POC). Contractor must provide the COR and Contracting Office with the POC contact details, to include business phone number or cell phone number and email, as a minimum: Within 5 business days of contract award, Within 5 business days after renewal or extension of services in accordance with, and if permitted by applicable FAR clause, and Within 5 business days prior to a change in the POC by the Contractor. The POC must be easily accessible by phone and return COR calls within 48 hours of a voice message left by the COR. Contracting Officer s Representative (COR) Upon contract commencement, the Contracting Officer will notify the Contractor in writing as to the COR assigned to this contract, and upon reassignment of a new COR, as applicable. Contractor shall only respond to requests for service from the COR or the CO. If service is requested from any source, other than the COR or the CO, the Contractor is to advise the individual of this requirement and refuse to respond. Any billing resulting from unauthorized service will not be paid by the government. The COR will evaluate the contractor s performance through review of the Contractor s Quality Control Procedures in accordance with this contract and PWS. Authority of the COR The Contracting Officer is the only person authorized to approve changes in any of the requirements of this contract. In the event the Contractor affects any changes at the direction of any person other than the Contracting Officer, the changes will be considered to have been made without authority and no adjustment will be made in the contract price or schedule to cover any increase in costs incurred as a result thereof. The Contracting Officer shall be the only individual authorized to accept nonconforming work, waive any requirement of the contract, and/or modify any term or condition of the contract. The Contracting Officer is the only individual who can legally obligate Government funds. No costs chargeable to the proposed contract can be incurred before receipt of a fully executed contract or specific authorization from the Contracting Officer. Any invoicing or charges resulting from unauthorized service will not be paid by the government. Government Alternate Points of Contact (POC) Emergencies Only The COR will identify Alternate Points of Contact (POC) to be used only for instances of emergencies when the COR is not easily contactable. These will be individuals in supervisory or managerial roles within the Biomed department. The contractor will be provided this information within 5 days after contract award and within 48 hours of a change to this information. An Alternate POC does not replace the COR nor do they replace the Contracting Officer during the performance and administration of this contract, nor does it relinquish or diminish the Contractor s requirements in relation to the performance of this Contract. LIABILITIES AND INSURANCES Protection from Damage Contractor shall provide all labor, materials, and equipment necessary for protection of VAMC personnel, furnishings, equipment and buildings from damage, and shall replace or repair any damage due to work performed under this contract equal to its original construction and finish. Liability Insurance Contractor must provide the COR and the CO with written confirmation that Contractor has adequate insurance protection against negligent work and other forms of liability. DEFINITIONS Acceptance Signature - COR's signature; indicates COR accepts work status as stated in Service Report. Contractor Employees has the same meaning as Contractor Personnel Contractor Personnel - has the same meaning as Contractor Employees COR Contracting Officer s Representative FDA - Food and Drug Administration (U.S. Department Of Health And Human Services) Field Technician or Field Service Engineer (FSE) - a person who is authorized by the contractor to perform PMR services on VA premises. Also known as Technically Trained Personnel. ISO - International Organization for Standardization Labor refer to Technically Trained Personnel, also Field Technician O.E.M. or OEM Original Equipment Manufacturer. The actual manufacturer and point of origin of the equipment. The OEM provides schematics and standards for maintenance and repair of the equipment and equipment shall be maintained in accordance with these practices. The OEM is identified in the Background section of this PWS. OEM-trained Technicians means contractor technicians (Technically Trained Personnel, FSE, Field Technicians), be they OEM or third party provided, who are formally trained to OEM standards to satisfactorily perform services on equipment in this PWS. Where OEM-trained technicians are required in the PWS it means that services are to be performed at no less than this criteria, for the period of performance at the location, to ensure the PWS Purpose is met in order to avoid future equipment breakdowns or malfunctions which could lead to the VA being accused of malpractice or negligence. This assists the VA in meeting its Mission. Original Equipment Manufacturer - OEM OSHA Occupational Safety and Health Administration PMI - Preventive Maintenance Inspection Service Report - a documentation of the services rendered for each incidence of work performance under the terms and conditions of the contract. Services includes Preventive Maintenance and Repair for equipment and components listed in this PWS and in accordance with this PWS SR Service Report Technically Trained Personnel are personnel and/or employees who shall be suitably knowledgeable in the field related to the services in this PWS in order to satisfactorily perform services in accordance with the PWS. The contractor shall provide personnel experienced and qualified to perform the required services in accordance with industry practices and standards. Also known as Field Technician or Field Service Engineer (FSE). For example, this could mean German-trained technicians, certified technicians etc. Technically Trained Personnel are also known as Contractor Personnel or Contractor Employees or Technicians. VAMC Veterans Affairs Medical Center Location of performance VA Medical Center 921 NE 13th. St. Oklahoma City, OK 73104-5007 IMPORTANTR NOTE: This RFI (Request for Information) is for information only; no award will be made from this RFI. Please communicate via e-mail to Mitchael.Purdom@va.gov by COB May 20, 2019 as to your company s ability to perform service per this brief Scope of Work. If interested please provide the following: Please state your company s business size Please provide DUNS number If you have a FSS/GSA contract that includes this service Provide FSS/GSA contract number if applicable

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C25919Q0312
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. Market ResearchCurrentJun 5, 2019

    J--Ziehm C-arm Preventative Maintenance

    Notice 0928cd3c4a0d3419e3e8df85421b8c08 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
RFQ 36C25927Q0032 Full-service Preventive Maintenance and Repairs on Siemens Symbia S Gamma Camera
82%
Solicitation10/28/2026
Full-service Preventive Maintenance and Repairs on Siemens Symbia S Gamma Camera
82%
Pre-Solicitation10/22/2026
SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION (RFI) Eaton Battery Replacement & Preventative Maintenance Michael E. DeBakey VA Medical Center Houston, TX DISCLAIMER: This is a Sources Sought Notice only. This notice is not a Request for Quote (RFQ), Request for Proposal (RFP), Invitation for Bid (IFB), or any form of solicitation as defined in FAR 2.101. This notice shall not be construed as a commitment by the Government to award a contract, nor does it restrict the Government s acquisition strategy. All information contained in this Sources Sought is preliminary and subject to change. Responses are strictly voluntary; the Government will not reimburse any costs associated with providing information in response to this notice. Respondents are requested not to submit proprietary or business confidential information. If a solicitation is issued at a later date, it will be published on the Federal Contract Opportunities website (SAM.gov) or the General Services Administration (GSA) portal. Interested parties are responsible for monitoring these sites for additional information. 1. Title Eaton Battery Replacement & Preventative Maintenance 2. Purpose The purpose of this Sources Sought is to identify qualified and capable sources that can support the Department of Veterans Affairs in determining an appropriate procurement strategy (e.g., set aside, sole source, or unrestricted) for a forthcoming solicitation. The Michael E. DeBakey VA Medical Center (MEDVAMC) in Houston, Texas, has an upcoming requirement for Eaton Battery Replacement & Repair in accordance with the Draft Statement of Work Statement (SOW). The contractor shall provide all labor, tools, equipment, materials, and supervision required to perform the following services on the Government equipment. This market research will assist the Government in assessing industry capability, availability of competition, and potential socioeconomic participation. The anticipated NAICS code is 811210 Electronic and Precision Equipment Repair and Maintenance, with a size standard of $34.0 million, and PSC J061 Maintenance Repair and Rebuilding of Equipment: Wire and Power Distribution Equipment. The Government anticipates awarding a single award, firm fixed price contract with all services to be completed within 60 days ARO. 3. Responses Requested Interested firms are requested to submit a capabilities statement responding to the items below. Failure to answer the questions may result in being considered non responsive to this Sources Sought. A. Company Information Provide the following: Legal Business Name Point(s) of Contact Address Telephone Number Email Address Unique Entity Identifier (UEI) CAGE Code B. Business Size / Socioeconomic Status Indicate whether your firm qualifies as any of the following under NAICS 811210: Small Business Service Disabled Veteran Owned Small Business (SDVOSB) Veteran Owned Small Business (VOSB) HUBZone 8(a) C. Capability Questions Does your company possess the capability to perform all services described in the Draft Statement of Work, including a complete preventive maintenance evaluation and replacement of all batteries in the Eaton 93PM-160-200 Uninterruptible Power Supply, serial number EQ275UXX06? Can your company provide all management, supervision, labor, transportation, tools, diagnostic equipment, materials, OEM parts, and other resources necessary to complete the preventive maintenance evaluation, battery replacement, and final performance testing within 60 days after contract award? Can your company provide technicians who are currently trained and certified by Eaton to service the specific UPS model identified in the Draft Statement of Work? If yes, describe the applicable certifications and provide evidence of recent successful completion of Eaton factory training. Does your company have continuous access to the current Eaton proprietary software, service procedures, technical updates, manufacturer recommendations, and OEM planned maintenance and replacement parts required to service and test the UPS? Can your company place the UPS in bypass mode and perform the preventive maintenance and battery replacement without interrupting MRI operations? Describe your proposed approach to coordinating the work with Imaging Service, Biomedical Engineering Service, and, if necessary, Siemens Healthineers. Does your company currently perform comparable UPS preventive maintenance and battery replacement services for other VA medical centers, federal agencies, healthcare facilities, or commercial clients? If yes, identify the UPS manufacturer and model, scope of work, contract number, period of performance, contract value, and customer point of contact. Provide estimated pricing or price ranges for the services described in the Draft Statement of Work, including the preventive maintenance evaluation, replacement batteries, labor, testing, documentation, transportation, removal and environmentally responsible recycling of the existing batteries, and any work performed after normal business hours or on weekends. Clearly identify any assumptions or separately priced items. Indicate whether your company holds any contract vehicles such as: . Government-Wide Acquisition Contracts (GWACs) SEWP National Acquisition Center (NAC) vehicles GSA Schedule / Federal Supply Schedule (FSS) Indefinite Delivery, Indefinite Quantity (IDIQ) contracts Blanket Purchase Agreements (BPAs)
74%
Market Research11/18/2026
Sources Sought Notice Sources Sought Notice Sources Sought Notice Sources Sought Notice This is NOT a solicitation or request for quote (RFQ). This is NOT a request for proposal (RFP). This is NOT a job advertisement for hiring employees. The VA is seeking QUALIFIED VENDORS to provide a very brief response to this notice including only just what is asked for in this notice below. This is sources sought notice to industry and the only information is posted on Contract Opportunities web page at SAM.gov. Sources sought means seeking qualified vendors. The attachments included on the Contract Opportunities page do not include any additional information. If your company is interested, please read this notice entirely and submit the required information, as requested herein. Xerox Copier Maintenance Agreement BRIEF SCOPE OF WORK (This is for information only) IMPORTANT NOTE: This Sources Sought is for market research purposes only (to determine the socioeconomic status of interested companies). No award will be made off this posting. 1). Scope of Work/Services: The contractor shall provide all personnel, material, equipment, supplies, tools, and non-personal services necessary to perform full-service preventive maintenance and repair services for the Government owned copier as defined in this Statement of Work (SOW). The contractor shall furnish all repair parts, labor, transportation, and supplies required to accomplish inspecting, cleaning, lubricating, adjusting, calibrating, vacuuming (if required), and repairing of equipment. Contractor shall maintain Government-owned equipment in the resultant contract at levels necessary to provide the specified functions to meet the manufacturer s current equipment specifications. 2). Background: The Department of Veterans Affairs has Xerox C8055HG Multifunctional Devices that requires a maintenance and repair service contract to maintain the equipment in good working order and to be operationally ready with unlimited printing. 2.1 The Vet center locations are: VC# VC Name Phone Address  Suite City State Zip 500 Continental District Office PH: 303-577-5205 789 Sherman Street Suite 570 Denver CO 80203 501 Cheyenne Vet Center PH: 307-778-7370 2617 E Lincolnway Suite C Cheyenne WY 82001 504 Denver Vet Center PH: 303-326-0645 4100 E Mississippi Ave Suite 310 Denver CO 80246 509 Billings Vet Center PH: 406-657-6071 2795 Enterprise Avenue Suite 1 Billings MT 59102 514 Salt Lake City Vet Center PH: 801-266-1499 84 W 4800 S Suite 100 Murray UT 84107 5141 Ogden Outstation Station PH: 801-737-9737 5957 Fashion Point Dr Suite 101 South Ogden UT 84403 519 Casper Vet Center PH: 307-261-5355 1030 North Poplar Street Suite B Casper WY 82601 525 Colorado Springs Vet Center PH: 719-471-9992 3920 N Union Blvd Suite 310 Colorado Springs CO 80907 526 Grand Junction Vet Center PH: 970-245-4156 561 25 Road Suite 101 Grand Junction CO 81505 527 Boulder Vet Center PH: 303-440-7306 4940 Pearl East Circle Suite 100 Boulder CO 80301 528 Missoula Vet Center PH: 406-721-4918 910 Brooks Suite 101 Missoula MT 59801 532 Provo Vet Center PH: 801-377-1117 360 S. State Street, Bldg C Suite 103 Orem UT 84058 538 Great Falls Vet Center PH: 406-452-9048 2208 21st Avenue South  Great Falls MT 59405 5381 Helena Outstation PH: 406-457-8060 1301 Elm St Suite C Helena MT 59601 539 Kalispell Vet Center PH: 406-257-7308 690 North Meridian Road Suite 101 Kalispell MT 59901 540 St. George Vet Center PH: 435-673-4494 1664 South Dixie Drive Suite C-102 Saint George UT 84770 542 Pueblo Vet Center PH: 719-538-4058 1515 Fortino Boulevard Suite 130 Pueblo CO 81008 543 Fort Collins Vet Center PH: 970-221-5176 702 West Drake Road Building C Fort Collins CO 80526 702 Amarillo Vet Center PH: 806-354-9779 3414 Olsen Boulevard Suite E Amarillo TX 79109 707 El Paso Vet Center PH: 915-772-0013 1155 Westmoreland Drive Suite 121 El Paso TX 79925 714 Lubbock Vet Center PH: 806-792-9782 5107 82nd Street Suite 100 Lubbock TX 79424 716 Midland Vet Center PH: 432-697-8222 4001 W. Illinois Midland TX 79703 718 Oklahoma City Vet Center PH: 405-456-5184 6804 N. Robinson Avenue Oklahoma City OK 73116 723 Tulsa Vet Center PH: 918-237-4200 6130 East 81st Street Suite 200 Tulsa OK 74137 728 Lawton Vet Center PH: 580-585-5880 10 SW 2nd St. Suite 4 Lawton OK 73501 733 Abilene Vet Center PH: 325-232-7925 4281 Treanor Dr  Abilene TX 79602 2.2 Xerox C8055HG Multifunctional Device serial numbers: City State Model # Serial Number Denver CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068966 Cheyenne WY C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071171 Denver CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068950 Billings MT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071416N Murray UT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071590 South Ogden UT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071588 Casper WY C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071162 Colorado Springs CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068835 Grand Junction CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068964N Boulder CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068961 Missoula MT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071539 Orem UT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071227 Great Falls MT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071462 Helena MT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071440 Kalispell MT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071550 Saint George UT C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071059N Pueblo CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB069076 Fort Collins CO C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB068957 Amarillo TX C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071262 El Paso TX C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071217 Lubbock TX C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071226 Midland TX C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071150 Oklahoma City OK C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071126 Tulsa OK C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071131 Lawton OK C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071129 Abilene TX C8055HG Multifunctional Device (Xerox TAA C8055H) 8TB071060 3). Period of Performance: The period of performance shall be for one year beginning 12/1/2026 and four (4) option years, ultimately ending 11/30/2031. 4). General Safety Requirements: While in performance of the resultant contract, the contractor shall maintain safety and health standards compliant with requirements of the Occupational Safety and Health Administration (OSHA) and adhere to VAAR 852.237-70 Contractor responsibilities. 5). Security Requirements: A security clearance is not required for contractor personnel performing work during the maintenance service visits and when delivering consumable supplies. The designated contractor personnel will be required to contact the site manager at each location as identified as the POC upon arrival when reporting for service calls or delivering supplies. The contractor shall be responsible for the security of all organizational information. The contractor shall not disclose or cause to disseminate any information concerning operations of Department of Veterans Affairs. Such action(s) could result in violation of the contract and possible legal actions. All inquiries, comments, or complaints arising from any matter observed, experienced, or learned of as a result of or in connection with the performance of the contract, the resolution of which may require the dissemination of official information, shall be directed to the government s designated representative. 6.0). Specific Tasks: 6.1 Service Calls: The contractor shall respond to service calls during normal working hours, Monday through Friday between 8:00 a.m. and 4:30 p.m. local, excluding holidays observed by the Federal Government. The contractor shall respond to verbal service calls and is expected to initiate the repairs within four (4) working hours after notification of malfunction. The response time on a service call starts when the service call is placed to the contractor. The service technician shall report to the service requestor and notify of his/her arrival and verify the problem for which the service call was made. If the service call is not completed, the service technician shall contact the government s designated representative and provide a detailed explanation as to why the equipment was not repaired and provide an estimated time for completion of the required repairs. The contractor shall complete the repairs and satisfactorily resolve the problem by effectively restoring the equipment to normal operating capability within 24 hours of responding or if part is not in stock then 48. 6.2 Preventive Maintenance: The contractor shall provide, at a minimum, one quarterly preventive maintenance service call to ensure that all Government-owned equipment are maintained in fully operational condition. Contractor shall maintain the equipment in the resultant contract at levels necessary to provide the specified functions to meet the manufacturer s current equipment specifications. 6.3 On or about the same day of each month, the contractor shall ensure that the printer is furnished with sufficient consumable supplies, (excluding paper and staples) to produce a volume of copies equal to the levels necessary to provide the specified functions to meet the manufacturer s current equipment specifications. 6.3.1 The contractor shall respond to verbal requests for additional consumable supplies under the following conditions: 6.3.2 The government s designated representative may make emergency requests for consumable supplies verbally. Orders will state the quantity and type of consumable supplies required and the location and serial number of the copier for which the additional consumable supplies are being ordered. 6.3.3 The contractor shall deliver additional consumable supplies within a period of twenty-four (24) hours after receipt of verbal order. 6.3.4 Supplies from the contractor shall be delivered between 8:00 a.m. and 4:30 p.m. local time , Monday through Friday (excluding Federal holidays) directly to the copier location. 7.0. Contractor-Furnished Items and Services The contractor shall furnish all personnel, materials, supplies including toner and developer, and equipment required to perform work under the contract, to include but not limited to, tools and expendable items with the exception of paper and staples. 7.1 The contractor shall furnish a designated point of contact (POC) to the government s designated representative for coordination of supplies, delivery, and/or maintenance. The POC will be empowered to make daily decisions to ensure that the contract implementation and day-to-day maintenance meets the terms and conditions of this contract. 7.2 The contractor shall provide a toll-free telephone number for service calls which must be answered during at least eight working hours, between 8:00 am and 4:30 pm, Monday through Friday MT. 7.3 Consumable Supplies: The contractor shall provide consumable supplies to include all parts, toner, developer, photoconductors, labor and all consumable items for the press identified. 7.4. In order to ensure the availability of consumable supplies, the contractor shall be required to establish and maintain a full stock of all such supplies as described. The Government shall not be responsible for either the inventorying or issuance of the contractor-furnished supplies. 7.5. Parts/Supplies Availability: The contractor shall have an inventory of parts in quantities sufficient to effectively service the resulting contract. The contractor shall have an internal inventory system and delivery system for the parts. The inventory and delivery system must be sufficient to service the contract in accordance with the maintenance response times specified in paragraph 4.1 and the supply delivery times specified in paragraphs 4.3.3 and 4.3.4. 7.6. Personnel Qualifications: The contractor shall be required to provide fully qualified and manufacturer trained or certified service, delivery, and management personnel in sufficient numbers to actively and efficiently service and support the equipment in place during the contract period. 7.7. Contractor s Unauthorized Work Performance: The contractor shall not perform work that deviates from contract requirements and specifications. If the contractor deviates from contract requirements and specifications without approval of the government s designated representative, such deviations shall be at the risk of the contractor and any cost related thereto, shall be borne by the contractor. IMPORTANT NOTE: This RFI (Request for Information) is for information only. No award will be made from this RFI. QUALIFIED VENDOR: A qualified source has the a) necessary equipment, vehicles, personnel, resources and current operations as well as b) recent experience (within past 3 years) of performing services of a comparable size, scope and complexity, AND c) OEM certified technicians to perform services with unrestricted access to the facility during inclement weather, as well as immediate access to OEM software updates. A qualified source also has current and valid registration in System for Award Management (SAM), https://www.sam.gov). A qualified source will also be able to comply with Limitations of Subcontracting pursuant to FAR 19.507. Please communicate via e-mail to heather.chase2@va.gov by 15:00 MST on October 30, 2026 as to your company s ability to perform service per this brief Scope of Work. If interested, please provide the following: Provide company s capability statement describing ability to provide equipment that meets or conforms to the salient characteristics listed above *include specification or brochure documents for confirmation of equivalent products* Company s business size in relation to NAICS 811210 and socio-economic category (SDVOSB/VOSB/WOSB/Large Business): SAM UEI: FSS/GSA contract # (if applicable): Estimated lead time: Where are the products manufactured/COO: Only written responses, to items 1 through 6 above, will be accepted at this stage. Information is being gathered for market research purposes only. Industry exchanges and vendor teleconferences are at the discretion of the Contract Specialist. This is not a request for quotes. DISCLAIMER: This is a Request for Information (RFI) from industry in accordance with Federal Acquisition Regulation (FAR) 15.201(e) and on the requirement, that exists for the VA Medical Center(s) identified in this RFI. This is not a request for quote and not a contract. This announcement is not a request for proposals; therefore, responses to the RFI are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responders are solely responsible for all expenses associated with responding to this RFI. No classified information should be included in the RFI response. Should you have concerns regarding this RFI you may request to contact the Contracting Office that will be assigned this requirement by emailing the sender of this RFI. Questions must be addressed in writing to the Contract Specialist. Requests for VA-business sensitive information, to include VA budget information, VA acquisition planning information, acquisition methods, strategies and set-asides must be addressed via the VA FOIA process: https://www.va.gov/foia/ Thank you for your interest in doing business with the VA. To learn more about the VA Mission, Vision, Core Values & Goals visit https://www.va.gov/about_va/mission.asp To understand the latest updates on the Veterans First Contracting Program visit https://www.va.gov/osdbu/verification/veterans_first_contracting_program_adjustments_to_reflect_the_supreme_court_kingdomware_decision.asp To find out how to do business with the VA visit https://www.va.gov/osdbu/library/dbwva.asp
63%
Market Research10/30/2026
Amendment 0001 hereby corrects response due date from 10/15/226 to 10/22/2026. In accordance with GSA Acquisition Regulation (GSAR) 538.7104-3(b)(1)(ii), this Notice of Intent is to inform all parties the Department of Veterans Affairs, Network Contracting Office (NCO) 19 located at 6162 South Willow Drive Suite 300, Greenwood Village, CO 80111 intends to award a sole source procurement for the following requirement to the large business, Original Equipment Manufacturer (OEM), Agilent Technologies, Inc., located at 2850 Centerville Rd., Wilmington, Delaware, 19808-1610. ITEM # DESCRIPTION OF SUPPLIES TO BE SOLE SOURCED FROM MULTIPLE AWARD SCHEDULE (GS-07F-0564X) QTY UNIT OF ISSUE 0001 JW 6465 Triple Quadrupole LC/MS Enhanced CROSSLAB SILVER PERIOD OF PERFORMANCE: BASE YR 11/01/2026 10/31/2027 OPTION 1 11/01/2027 10/31/2028 OPTION 2 11/01/2028 10/31/2029 OPTION 3 11/01/2029 10/31/2030 OPTION 4 11/01/2030 10/31/2031 5 YR 0002 VV 6465 Triple Quadrupole LC/MS Enhanced-CROSSLAB SILVER PERIOD OF PERFORMANCE: BASE YR 11/01/2026 10/31/2027 OPTION 1 11/01/2027 10/31/2028 OPTION 2 11/01/2028 10/31/2029 OPTION 3 11/01/2029 10/31/2030 OPTION 4 11/01/2030 10/31/2031 5 YR 0003 MW 6465 Triple Quadrupole LC/MS Enhanced-CROSSLAB SILVER PERIOD OF PERFORMANCE: BASE YR 11/01/2026 10/31/2027 OPTION 1 11/01/2027 10/31/2028 OPTION 2 11/01/2028 10/31/2029 OPTION 3 11/01/2029 10/31/2030 OPTION 4 11/01/2030 10/31/2031 5 YR 0004 Other MVS Direct Delivery Systems CROSSLAB PASSTHROUGH SERVICES PERIOD OF PERFORMANCE: BASE YR 11/01/2026 10/31/2027 OPTION 1 11/01/2027 10/31/2028 OPTION 2 11/01/2028 10/31/2029 OPTION 3 11/01/2029 10/31/2030 OPTION 4 11/01/2030 10/31/2031 5 YR 0005 Other MVS Direct Delivery Systems CROSSLAB PASSTHROUGH SERVICES PERIOD OF PERFORMANCE: BASE YR 11/01/2026 10/31/2027 OPTION 1 11/01/2027 10/31/2028 OPTION 2 11/01/2028 10/31/2029 OPTION 3 11/01/2029 10/31/2030 OPTION 4 11/01/2030 10/31/2031 5 YR In accordance with GSAR 538.7104-3(b)(1)(ii): Only one source is capable of providing the supplies or services required at the level of quality required because the supplies or services are unique or highly specialized; Agilent is the sole source for proprietary instrument firmware, software updates, engineering upgrades, and written maintenance and repair procedures. Third-party providers are not authorized to install or support these updates and do not have access to Agilent s proprietary instrument diagnostic and troubleshooting tools. Agilent provides proprietary remote support capabilities designed to improve first-call resolution and maximize instrument uptime. These capabilities include factory-supported remote diagnostics, firmware tools, virtual assistance technologies, and Agilent-specific compliance and qualification platforms. Certain tools and platforms are available exclusively to Agilent service contract customers and are not licensed for third-party use. The associated North America Classification Systems (NAICS) Code is 811210 and the Business Size Standard is $34 Million. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. Interested parties may identify their interest and capability to respond to this requirement no later than 4:00 PM Mountain Standard Time, Thursday, October 22, 2026. Information received in response to this notice must clearly demonstrate the capability of meeting the Government s need as stated above. Include any relevant information (specifications, cut sheets, brochures, capability statement, etc.) confirming the ability to supply the products and/or any services outlined in this notice. Responses to this notice are to be sent to Lindsey.Zwaagstra@va.gov. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government. The Government is not responsible for any potential costs incurred from interested parties desiring to respond to this notice.
62%
Special Notice10/22/2026

Additional Details

Solicitation Number

36C25919Q0312

Archive Date

Aug 18, 2019

Office Address

Greenwood Village, CO, 80111