GovChime
Notice ID: 73aa6e5b9fd64c01bfd25d2e15909363Solicitation

Arjo Patient Lifts

Archived on October 15, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−06:00
Posted
September 16, 2021
Notice type
Solicitation
NAICS
339112: Surgical and Medical Instrument Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
NETWORK CONTRACT OFFICE 19 (36C259)
Place of performance
Salt Lake City, 84148
Last updated
Sep 25, 2026

Identifiers

Solicitation number
36C25921Q0758
Notice ID
73aa6e5b9fd64c01bfd25d2e15909363

Description

Amendment 0001 The purpose of this amendment is to: 1. Attach a PDF containing a list of questions and answers regarding this solicitaiton. 2. Remove the checkmark from 52.225-1 under 52.212-5. 3. Add a checkmark to 52.225-3 under 52.212-5. 4. Remove "Tracks are recessed into ceiling" from item 3.3 under Technical of the SOW on page 17 of the solicitation. The solicitation is not extended and is due 9/17/2021 at 2:00 PM MT. All other terms and conditions remain unchanged. ------------------------------------------------------------------------------------------------- Arjo Patient Lifts This solicitation is for products in accordance with the attached Statement of Work (SOW) and Price/Cost Schedule. Questions must be submitted to matthew.sarangay@va.gov prior to 2:00 PM MDT on 9/16/2021. Quotes must be submitted via email to matthew.sarangay@va.gov no later than 2:00 PM MDT on 9/17/2021.

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Dec 31, 2020

NAICS

339112

Agency

Department of Veterans Affairs

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:36C25921Q0758
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    SolicitationCurrentSep 15, 2021

    Arjo Patient Lifts

    Notice 73aa6e5b9fd64c01bfd25d2e15909363 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
-Combined Synopsis10/30/2026
This market research notice is being conducted by Network Contracting Office (NCO) 17 VHA Regional Procurement Office-West (RPOW) 5441 Babcock Road Medical Center, 302 San Antonio TX 78240 for the procurement for the Multilab Series II Roorda Vascular System W/DICOM, integration capabilities for San Antoino Veterans Health Care System VA, TX 78229 Background and Requirement: San Antiona Veteran Healthcare System, 7400 Merton Minter, San Antonio, Tx 78229 is seeking a Multilabel Series II Roodra Vascular System W/DICOM. The purpose of this procurement is to acquire, deliver, install, test, and deploy four (4) Multilabel Series II Roodra Vascular Systems with DICOM integration capabilities. The required system is the Unetix Multilab II Roorda with DICOM functionality. The objective of this procurement is to provide the surgical service with advanced vascular diagnostic equipment that seamlessly integrated with existing imaging and clinical information systems through DICOM connectivity for their vascular clinic. The Unetix Multiab II Roorda is the only known vascular diagnostic system that is fully compactable with the facility s VascuPro network and reporting platform. Procuring this equipment will ensure continuity of operations, maintain interoperability with current infrastructure, and support efficient delivery of patient care without the need for costly system modification or workflow disruptions at 7400 Merton Minter, San Antonio, Tx 78229. If this is an item your business can provide, please respond to this Sources Sought Notice by 11:00 AM Central Time on Thursday, 19 November 2026. The intent of this notice is to establish sources to define the procurement strategy (e.g. set-aside, sole source, unrestricted) for a solicitation that VA intends to post soon. Interested contractors are requested to respond in accordance with the following: a. where is the item manufactured, the VA is interested in procuring items manufactured in the United States. If you have an existing GSA or VA, Federal Supply Schedule contract, include the contract details in your response. Please note that VA is particularly interested in determining the availability of Service Disable Veteran Owned Small Business/Veteran Owned Small Business or other Small Business manufacturers or authorized distributors that can provide this item. Respond to this notice if you can provide these products listed in the table in the background and requirement section above. In response, please cite your business size status. DISTRIBUTORS: You must provide proof that you are an authorized distributor. VA does not accept gray market items. Vendors are requested to submit estimated market research pricing with their responses. The estimated pricing will be considered when determining the procurement strategy for the future solicitation. (e.g. if CO determines that capable small businesses cannot provide fair and reasonable pricing, then the solicitation will not be set-aside). Responses should include: (1) Business Name (2) Business Address (3) Point of Contact - Name - Phone Number - E-mail Address (4) SAM UID Number (5) NAICS code (6) Business Size: SMALL or LARGE (7) Type of Business: SERVICE-DISABLED VETERAN OWNED (SDVOSB), VETERAN OWNED(VOSB), 8A, HUBZone, WOMAN-OWNED (WOSB), etc. (8) Letter stating OEM authorized dealer, authorized distributor, or authorized reseller for the proposed equipment and/or services if applicable (9) GSA/FSS Contract Number if applicable All businesses eligible to provide this item are encouraged to reply as this information may be used to determine potential set-asides for the above-noted requirement. Send responses to Michelle Cunningham at michelle.cunningham@va.gov. DISCLAIMER: THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. However, Contractors may submit a capability statement, proposal, or quotation which shall be considered by the contracting officer whether to continue with the sole source procurement or to provide for competition. Due to technical issues, please allow additional time if you re using electronic means. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses received to this notice is solely within the discretion of the Government.
-Market Research11/19/2026
Good day, SDVOSB s, VOSB s & SB's Sources Sought INTENT TO SOLE SOURCE Pre-Solicitation. This Sources Sought is issued solely for informational and planning purposes only. It does not constitute the issuance of a solicitation or a promise to issue solicitation in the future. The purpose of this notice is to conduct market research and obtain information from qualified SDVOSBs VOSBs , or SBs . This is not a request for bids, quotes, offers, or proposals. The responses to this announcement will assist in determining the socio-economic status such as a SDVOSB set-aside if feasible. If insufficient SDVOSB responses are received to establish the basis for setting this requirement aside for SDVOSB s, the requirement may be solicited as a VOSB or a SB set aside, if none or not enough small business responses are received, this may be solicited as unrestricted, all interested parties responding shall be eligible to compete. Please reply in the affirmative via email if you are interested and can provide the required product/services for this requirement. Please provide your capability statement, and any other supportive documentation. I will accept responses for this Sources Sought until the 16th of November 2026 14:00 EDT, thanks. 1. General: C.W. Bill Young Veterans Medical Center Surgery Service located at 10000 Bay Pines Blvd. Bay Pines, Fl. 33744 is seeking procurement of six transducers and six trays from GE Healthcare. The department requires replacement of ultrasound transducers that have reached the end of their operational life and can no longer be repaired or supported by the manufacturer. 2. Background: These transducers are vital to patient diagnostic and procedural imaging. The existing probes have been evaluated by Biomedical Engineering and determined to be non-functional, unrepairable, and beyond economical repair. Without replacements, the service cannot maintain adequate imaging capacity to support patient care. 2.Scope of Work: This requirement needs to provide six (P/N: 9018) E14C4T Triplane endo transducers and six (P/N:UA2511) trays. 3.Place of Performance: The product is requested to be delivered to Surgery Service, building 100, MOR. 10,000 Bay Pines Blvd, Bay Pines, Florida 33744, via the Warehouse Building 36 for Equipment. 4.Period of Performance: The product is requested to be delivered no later than December 19th. 5.Type of Contract: Supply: Firm, Fixed Price. 6.Requirement Overview: The Contractor shall provide the full requested quantity of products listed below. 6.1 Salient Characteristics NAME BRAND - Equipment Requirement: GE Healthcare QTY. 6 - (P/N: 9018) E14C4T Triplane Endo Transducer QTY. 6 (P/N: UA2511) Reprocessing Trays for E14C4T Equipment Requirement: Minimum Required Features and Specifications Type / Intended Use: Must be a transrectal ultrasound transducer specifically designed for prostate imaging and biopsy guidance in urology applications. Must provide multi-plane (triplane) imaging capability allowing visualization of transverse, sagittal, and end-fire planes without changing probes. Frequency & Imaging Performance: Must operate within a frequency range of approximately 4 MHz to 14 MHz to provide both high-resolution and deep-penetration imaging of the prostate. Must support B-mode, M-mode, Color Doppler, and Power Doppler imaging modes (with optional elastography and contrast imaging if supported by the connected ultrasound system). Biopsy and Procedural Capability: Must include or support an integrated biopsy guide channel that allows both biplane and end-fire biopsy procedures without requiring probe exchange. Must accommodate standard 17- or 18-gauge biopsy needles through compatible biopsy guide attachments. Must permit real-time needle visualization during transrectal or transperineal prostate biopsy procedures. 4. Design & Ergonomics Must be a compact, endocavity-style probe suitable for patient comfort and operator ergonomics during transrectal use. Must include a control ( Smart ) button or equivalent for hands-free freezing, storing, or switching imaging planes directly from the probe handle. Must be designed for one-handed operation and compatible with sterile probe covers. 5. Compatibility Must be fully compatible with BK Medical ultrasound systems, including bk3000, bk5000, bkActiv, and bkSpecto platforms. Must connect using the appropriate BK Medical proprietary connector interface without the need for modification or adapters. 6. Cleaning & Sterilization Must be fully immersible and validated for standard high-level disinfection or sterilization processes used for endocavity probes. Must be compatible with approved sterile covers and disinfection solutions specified in the manufacturer s reprocessing guide. 7. Construction & Safety Must be constructed of biocompatible materials suitable for internal use (per ISO 10993 or equivalent standards). Must comply with applicable IEC/EN 60601-1 electrical safety and ultrasound acoustic output limits. Must be supplied new, manufacturer-certified, and covered under OEM warranty for clinical use. Summary Table Feature Category Requirement Type Triplane transrectal prostate ultrasound transducer Frequency 4 14 MHz Imaging Modes B, M, Color Doppler, Power Doppler (Elastography optional) Biopsy Capability Integrated dual-plane biopsy guide Needle Compatibility 17 18 G Operation One-handed, Smart Button on probe Sterilization Fully immersible, high-level disinfectable Compatibility bk3000, bk5000, bkActiv, bkSpecto Intended Use Prostate imaging and biopsy guidance Condition New OEM product, OEM warranty
-Market Research11/16/2026
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTE. The NCO 12, Great Lakes Acquisition Center, 115 S. 84th Street, Suite 101, Milwaukee, WI 53214, is performing market research to determine if there is a sufficient number of qualified: (1) Service Disabled Veteran Owned Small Business (SDVOSB); (2) Veteran Owned Small Business (VOSB); or (3) Small or emerging small business firms, or (4) Other Than Small business firms, to provide Humidifier Heater base, Humidifier Sensor Cartridge, and Humidifier Expiratory Heater to the , Captain James A. Lovell Federal Health Care Center in North Chicago, IL. General Requirements: Brand Name or Equal The below products are known to meet the governments needs all equal parts will be considered. 950 Humidifier Heater base, 950 Humidifier Sensor Cartridge, and 950 Humidifier Expiratory Heater Wire Adapter or Equal Salient Characteristics: Therapy Profiles: Must support Invasive ventilation Must support Noninvasive ventilation Must support Nasal High Flow therapy. Temperature Probes: Must have no external temperature probes Must incorporate internal temperature probes that do not require special disinfection processing Circuit Compatibility: Must be compatible with single heated circuits for non-invasive ventilation. Must be compatible with double heated circuits for invasive ventilation. User Interface: Must have a simple user interface Must include touch screen monitors to create setting modifications Must allow mode changes Must allow comfort setting adjustments Must display and troubleshoot alarms Must provide access to Information and Service menus Alarms: Must have built-in alarms for various conditions including but not limited to: 1. High Temperature alarms 2. Low Temperature alarms 3. Water Out alarms 4. Circuit Disconnect alarms 5. Reverse Gas Flow alarms 6. System check alarms Compatibility: Must be compatible with all ventilation and gas flow delivery devices that is currently used at FHCC, Specifically, must be compatible with Medtronic 980 ventilators Specifically, must be compatible with Philips V60 BiPAP devices Specifically, must be compatible with Nihon Kohden 330, 440, and 550 ventilator systems All interested firms who can meet the requirements stated above should respond, in writing, INCLUDING ALL THE FOLLOWING: Company name. Address. Point of contact (name/title/telephone number/e-mail address). FSS / SEWP Contract number, if applicable. SAM Unique ID number. Tax ID number. Indication of which business category (SDVOSB, VOSB, Small Business or Other Than Small Business) for which the organization qualifies. A capability statement that addresses the organizations qualifications and ability to provide the requirement depicted above. Documentation from manufacturer (i.e. correspondence from manufacturer) of your firm being an authorized distributor for the manufacturer. Submit responses to the Contracting Specialist, Ryan Nugent, at Ryan.Nugent@va.gov no later than 8:00 AM (Central Standard Time), 23 November 2026. 36C25227Q0090 950 Humidifier Heaterbase shall be referenced on all correspondence regarding this announcement. TELEPHONIC INQUIRIES WILL NOT BE ACCEPTED. The NAICS Code 339112, Surgical and Medical Instrument Manufacturing, is applicable to this acquisition; the size standard is 1,000 employees. Interested firms are reminded that in accordance with FAR 4.12, prospective contractors shall complete electronic annual representations and certifications in conjunction with FAR 4.11 required registration in the Systems for Award Management (SAM) database prior to award of a contract. The Government will use responses to this notice to make an appropriate acquisition decision. This is the only notice; no other copies of this notice will be provided.
-Market Research11/23/2026
This is a SOURCES SOUGHT NOTICE ONLY. This SOURCE SOUGHT NOTICE is for the purpose of Market Research. Response to this notice will be used for information and planning purposes. No proposals or quotes are being requested or accepted with this notice. THIS IS NOT A SOLICITATION FOR PROPOSALS or QUOTES and NO CONTRACT SHALL BE AWARDED FROM THIS NOTICE. This notice shall NOT be construed as solicitation or as an obligation on the part of the Department of Veterans Affairs (VA). Response to this notice is not a request to be added to a prospective bidders list or to receive a copy of the solicitation. The Central Arkansas Veterans Health Care System is seeking preferably Service-Disabled Veteran Owned Small Businesses (SDVOSB), or Small Businesses (but will accept other than small business for market research purposes), capable of providing Medtronic ManoScan Eso Z catheters for the Central Arkansas Veterans Health Care System. It is noted that Limitations on Subcontracting requirements will apply to a future solicitation and contract for this requirement. Contractors who are contemplating their interest and/or participation in this procurement should familiarize themselves with these requirements as adherence will be required. See DRAFT Performance Work Statement for detailed description of this requirement. The Government s intent is to identify vendors capable of providing the Medtronic ManoScan Eso Z catheters that meets or exceeds the salient functional characteristics described in the Draft Performance Work Statement. Vendors offering equivalent products must provide product literature demonstrating how their item meets the Government s minimum essential requirements. The NAICS code is NAICS 339112 Surgical and Medical Instrument Manufacturing, and the Size Standard is 1,000 Employees. Responses must be received by no later than 12:00 p.m. Eastern Time, November 13, 2026. Responses shall be emailed to jacqueline.ambala@va.gov. Facsimile or Telephonic responses will not be accepted. Responses shall contain Capabilities Statements to include the following: Contractors shall also provide the following: Contractor name: ___________________________________________ Point(s) of contact name: ______________________________________ Address: ___________________________________________________ Telephone number: ___________________________________________ Email address: _______________________________________________ Company's business size: _______________________________________ UEI #: ______________________________ CAGE Code: _______________________________ Proof that you are an authorized dealer and/or any qualifying certifications that may be required to perform the service. Is your company considered a small business concern, Small Business (SB), Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Historically Underutilized Business Zone (HUBZone), or 8A concern under the NAICS 339112? Does your company have the services available under any Government Wide Agency Contract (GWAC), General Service Administration (GSA), Federal Supply Schedule (FSS), Indefinite Delivery Indefinite Quantity (IDIQ), and/or Blanket Purchase Agreement (BPA) contract? If so, please identify the contract number for the government to review as part of this Market Research. Note: All interested parties are reminded to be registered, active and verified in the following to be considered for Award. SAM: SAM.gov | Home SBA Small Business Search: https://search.certifications.sba.gov/ Vet 4212 (Veteran owned small Business are reminded of Reporting Requirements) VETS-4212 Federal Contractor Reporting | U.S. Department of Labor (dol.gov)
-Market Research11/13/2026

Additional Details

Solicitation Number

36C25921Q0758

Archive Date

Oct 15, 2021

Office Address

Greenwood Village, CO, 80111