GovChime
Notice ID: 3c0d0944536946878d60320c610179eeCombined Synopsis/SolicitationArchived

6530--VA Community Living Center Specialized Medical Beds Miles City, MT

Archived on July 15, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM MDT
Posted
June 23, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
NETWORK CONTRACT OFFICE 19 (36C259)
Place of performance
VA CLC (New Location) 2300 Wilson St., Miles City, Montana, 59301
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
36C25926Q0542
Notice ID
3c0d0944536946878d60320c610179ee

Description

Page 1 of Amendment to a Previous Combined Solicitation Page 9 of 9 Amendment to a Previous Combined Solicitation Page 1 of 9 DESCRIPTION Amendment 001 to Solicitation #36C25926Q0542 VA Community Living Center Specialty Beds This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Also, Questions and Answers: The RFQ states that the requirement is Brand Name or Equal to Umano OOK SNOW Models. Will the Government accept a quote that includes equivalent products from more than one manufacturer, provided the quoted package meets or exceeds all listed salient characteristics, includes all required accessories/services, and is quoted on an all-or-nothing basis? Yes, multiple brands can be accepted as long as the full requirement is provided for and all aspects meet or exceed salient characteristics. If an offeror proposes a mixed-manufacturer solution, such as one manufacturer for the standard low-height beds and another manufacturer for the bariatric low-height beds, will the Government evaluate the package as acceptable so long as each quoted item meets or exceeds the applicable salient characteristics and all required documentation is provided? Yes. Unless a solicitation specifies otherwise, there are no limitations on using only one brand to meet the solicitation requirements. The vendor is responsible for providing the authorized distributor direct from each manufacturer. For equal products, should the offeror submit a line-by-line compliance matrix mapping each salient characteristic to the corresponding page/section of the manufacturer s cut sheet or specification sheet? Although it is not mandatory, it is recommended that vendors provide some form of documentation that directly addresses each salient characteristic and how their proposed brand meets or exceeds the salient characteristics and SOW. Regardless of the format, vendors must ensure documentation of some kind is provided that will allow the Government to verify all salient characteristics are met for the requirement. For CLINs involving accessories, patient controls, bed-control units, trapeze systems, mattresses, nurse-call connectivity cables, and support-surface components, may functionally equivalent accessories from the offered bed manufacturer be quoted, provided they meet the intended clinical, functional, compatibility, and safety requirements? Vendors must provide each line item with products that meet or exceed salient characteristics. The RFQ requires the bed design to not include side rails or for side rails to be removable upon delivery and installation. Please confirm whether an equal product is acceptable if the manufacturer ships the bed with side-rails but the contractor removes/configures the bed without side-rails during installation prior to Government acceptance. The final, installed beds must not have siderails. Vendors may either propose a product that is designed without siderails OR the vendor may remove them once delivered during the installation process. Siderails must be completed removed prior to acceptance for the item. The entire siderail must be removed, not just a part of the side rails. The RFQ requires bed-to-nurse-call connectivity cables and functional testing of bed-exit outputs. Please identify any known nurse-call system, connection standard, facility interface, or existing system requirement at the Miles City CLC that offerors should account for in pricing and technical documentation. The current nurse call system is West-Com Novus Connect platform. Per the specs from this system, the beds should be able to connect to the system with a 37-pin bed connector with standard mounting nuts. **Updated SOW attached which specifies 37-pin nurse call connector The RFQ requires onsite, face-to-face training for Nursing and Biomedical Engineering. May the prime contractor satisfy this requirement through OEM-certified manufacturer personnel or OEM-authorized service/training personnel, with the prime contractor coordinating scheduling, documentation, and acceptance? The vendor may determine which entity provides the training as long as the training results in VA staff being able to operate and manage the equipment in accordance with the OEM guidance. Please confirm whether training must be completed before final acceptance and invoicing, or whether the Government will allow milestone/partial invoicing for equipment delivery before final installation, functional testing, training, and acceptance. Since training is a separate line item, it may be invoiced at a later date. However, final acceptance is contingent upon ensuring the product is fully functional with no defects or missing components. The Government cannot accept equipment until they are able to confirm the equipment is installed since installation is necessary to test the equipment. Delivery alone is not sufficient for the Government to take possession of and accept items for payment. Although vendors are able to submit invoices, invoices will not be processed for payment until the equipment is considered fully functional and acceptable. Please confirm whether the Government will allow partial or milestone invoicing for this requirement, including separate invoicing after delivery, installation/configuration, functional testing, onsite training, and final acceptance. If not, should offerors assume payment will occur only after full delivery, installation, training, documentation, and Government acceptance? Vendors may submit invoices when they deem appropriate. However, those invoices shall not be processed nor paid until the Government has determined the action/item has been completed. Payment for the items occur after the items have been delivered, installed, and tested to verify no defects. Invoices for training shall be processed upon completion of the training - all relevant VA staff have been trained fully. The RFQ states that delivery and installation are contingent upon the lease/start of the facility, approximately December 2026, to be discussed post-award. Should offerors base delivery lead time on the number of calendar days after written notice to proceed or after the facility is made available for delivery and installation? Due to the station only having an approximate date well in advance vendors should provide the Government with a current delivery/lead time upon receipt of award BUT should communicate with the manufacturer that any potential delivery of the item would be delayed until approx.. December 2026. This would enable the manufacturer to prioritize and plan accordingly to the tentative timeline. For the required five-year warranty, the RFQ states that standard manufacturer warranty alone is not acceptable and that the warranty must cover parts and labor for normal wear and tear as well as damage resulting from unintentional negligence and misuse. Please confirm whether an OEM-provided extended warranty/service plan satisfies this requirement if it is included as a fixed-price line item and covers all 17 bed systems. Since different manufacturers may include different things in their warranties (regular, extended, service plan, etc.) the offeror would need to provide detailed information on the warranty they are offering. If the proposed warranty does not provide what is requested in the SOW, the warranty component would be considered unacceptable. For the five-year warranty/service requirement, must service personnel be local to Montana, or is manufacturer/OEM-authorized onsite service acceptable if response times and coverage terms are clearly stated in the quote? The offeror if awarded would be responsible for all work and services performed on this contract. Therefore, representatives are not required to be local to Montana. Ultimately, as long as the services can be provided timely and completely in accordance with the contract, the awardee should be able to send the most appropriate representative if sufficient communication occurs with the station prior to the site visit. For VAAR 852.212-71(c), if the offeror is not the OEM, please confirm that an OEM authorization letter is required from each manufacturer whose products are included in the quote. Correct, offerors MUST provide an authorized distributor letter (ADL) directly from the OEM(s) of the products they are proposing in their quote. Lack of ADL from each manufacturer, whose products are included in the quote, may result in the offeror s quote package being considered incomplete. If a quote includes products from more than one manufacturer, will the Government require separate OEM authorization letters from each manufacturer, or will one authorization letter from the primary bed manufacturer be sufficient? Letters must be provided from any/all manufacturers whose products are included in the quote. If only one product/brand is in the quote, only one letter is required. If three (3) different product/brands are included in the quote, all 3 manufacturer authorized distributor letters must be provided. The RFQ is a 100% small business set-aside under NAICS 339113. For a small business reseller/nonmanufacturer proposing brand-name or equal medical beds manufactured by an OEM, will the Government apply the non-manufacturer rule to this procurement? If applicable, has a waiver been issued or requested for this requirement? No waiver is available for NAICS 339113. However, NMR does not typically apply to small business set-asides under SAT. Therefore, we do not anticipate any issues with resellers offering products from large business manufacturers. The RFQ includes FAR 52.225-1 and requires FAR 52.225-2 Buy American Certificate. Please confirm that foreign end products are not automatically excluded if properly identified in the Buy American Certificate, and that such products will be evaluated in accordance with FAR Part 25. Correct. Vendors should fill out the Country of Origin for each line item for full transparency. Quotes with foreign items will not be disqualified from this requirement but the information provided will be taken into consideration during the evaluations phase. However, vendors who knowingly or unknowingly provide incorrect COO information may be considered ineligible for further consideration for this requirement. The RFQ states that priority may be given to products made in the United States. Please clarify how Buy American status will be considered in the comparative analysis relative to technical capability, price, delivery lead time, and other evaluation factors. Unable to specify. All factors will be reviewed to determine the best course of action. The Buy American Act urges the Government to purchase domestic products whenever possible. However, different factors may be impact the final decision and providing domestic items may have impact on final selection for award. For FOB Destination, the RFQ states freight shall be added to CLIN 0001 and not listed as its own line item. If an offeror quotes products from multiple manufacturers or multiple shipping origins, should all freight still be rolled into CLIN 0001, or should freight be allocated across applicable equipment CLINs while remaining included in line-item pricing? Offerors may use their best judgement with how to allocate the freight fees associated. In this requirement, there is a delivery and installation line item. Some vendors have added their freight fees to this lien item as part of the delivery component. Overall, there should be no new, additional lien item for freight fees only. Please confirm whether the Government will permit equivalent model numbers and part numbers that differ from the listed Umano MPNs, provided the quoted items meet or exceed the salient characteristics and are clearly identified by brand, make, and model number. Offerors shall use their best judgement when determining what products to include in their quotes. As long as the items meet or exceed all salient characteristics and documentation is provided to clearly verify this, the Government shall not limit an offeror to only one specific configuration/model/brand/etc. Please confirm whether the Government requires all quoted beds, mattresses, accessories, connectivity cables, controls, support-surface systems, and service/warranty coverage to be from one manufacturer, or whether compatible products from multiple authorized OEM sources are acceptable. Products from more than one manufacturer is permitted as long as documentation is provided (brochures/specs/other information for salient characteristics, Authorized Distributor Letter(s), etc.) Are refurbished beds with new mattresses acceptable? Or would all new equipment be required? The intent is to acquire completely new equipment from this solicitation. Refurbished equipment should NOT be included in any offers.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Stephanie Cahill
Contracting Officer

Documents

Files (3)

  • Update SOW_.docx

    32 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • 36C25926Q0542 0001.docx

    37 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • 36C25926Q0542.docx

    64 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationArchived

    6530--VA Community Living Center Specialized Medical Beds Miles City, MT

    Notice e618d7325d5d4a9bbf2a4ae1a1cafa97 on SAM.gov

  2. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    6530--VA Community Living Center Specialized Medical Beds Miles City, MT

    Notice 3c0d0944536946878d60320c610179ee on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
-Combined Synopsis10/30/2026
SOURCE SOUGHT NOTICE Rehabilitation Equipment High Low Beds and Parallel Bars This announcement requests information from industry to support market research and preliminary acquisition planning for the procurement of physical therapy/rehabilitation equipment needed for a new clinic near Indianapolis, IN. The purpose of this notice is to assess industry interest and identify potential sources with the capabilities and qualifications to meet the following requirements. This is not a solicitation for quotes. No contract will be awarded from this notice. No proposals are being requested or accepted with this notice. The government will not pay any costs for the time and effort to respond to this notice. REQUIREMENT The agency is seeking information on domestic sources of supply for two pieces of medical equipment as described below: Parallel Bars, Physical Therapy (quantity 1 each) Description: The electric platform-mounted parallel bars shall provide adjustable support for gait training, balance, mobility, and rehabilitation activities. The system shall provide powered height adjustment, adjustable width, a slip-resistant walking platform, and stable handrails to accommodate patients of varying sizes and functional abilities. Salient Characteristics: Made in America. Provides a 10-foot gait-training platform. Provides 500 lb load capacity. Electrically adjusts handrail height from approximately 26 54 in. Manually adjusts handrail width from approximately 20 34 in. Includes 1.5-in. diameter stainless-steel handrails. Includes a 48-in. wide, two-piece slip-resistant platform. Provides digital height display and four programmable height settings. Provides synchronized powered height adjustment with automatic safety shutoff. Equipment shall be new, current-production equipment suitable for professional rehabilitation applications. ETL approved. Table, Treatment, Hi-Lo, Bariatric, 500-lb capacity (quantity 3 each) Description: The bariatric hi-lo treatment table shall provide a stable, electrically powered treatment surface for patient examination, evaluation, rehabilitation, and therapeutic procedures. The table shall support safe patient transfers through powered height adjustment while providing multiple positioning options to accommodate a wide range of clinical applications. The system shall be suitable for physical therapy, occupational therapy, rehabilitation, outpatient clinics, sports medicine, and VA healthcare facilities. Salient Characteristics: Made in America Provides a powered height-adjustable treatment surface with a height range of approximately 18 to 37 inches to facilitate patient accessibility and clinician ergonomics. Supports a minimum patient weight capacity of 500 pounds. Includes a three-section upholstered treatment surface to support a variety of patient positioning and therapeutic procedures. Provides an adjustable head section with a positioning range from approximately +45 degrees to -90 degrees. Provides an adjustable lower extremity section with a positioning range from 0 to approximately 78 degrees. Features perimeter foot-operated height controls that allow clinicians to adjust table height from either side while maintaining continuous patient contact. Includes a heavy-duty frame designed to provide stability during patient treatment and transfers. Features four total-lock swivel casters to facilitate movement and secure positioning during patient care. Includes high-density foam cushioning and seamless, heavy-duty upholstered surfaces designed for patient comfort and ease of cleaning. Features rounded table edges and corners to enhance patient safety and reduce the potential for injury. Provides a low transfer height of approximately 18 inches to facilitate patient accessibility and transfers. Operates on standard 120 VAC, 60 Hz electrical service. Includes all power cords, controls, mounting hardware, and accessories necessary for complete clinical operation. Equipment shall be new, current production model equipment suitable for professional healthcare examination, rehabilitation, and therapeutic treatment applications. Interested parties who can provide the products described are requested to submit the following information: Company name, address and point of contact with phone number, SAM Unique Entity Identifier (UEI)*, Product information documenting salient characteristics, Feedback on salient characteristics, Place of manufacture, Socio-economic status to identify the business class as a large business, SDVOSB, VOSB, small business, Woman Owned, etc., and Any other pertinent product, company, or industry information. * Note: To be eligible for award of a federal contract, businesses must have an active registration in the System for Award Management (SAM). Firms that respond to this Sources Sought Notice without providing all the requested information may not be considered by the Government in making acquisition decisions. This market research is conducted for informational and planning purposes only. This notice does not constitute a solicitation and does not obligate the Government to issue a solicitation. The Government, at its sole discretion, may elect not to notify respondents of the results of this notice or otherwise release those results. Send submissions via email to Brian.Rosciszewski@VA.gov, reference 36C25027Q0044 in email subject. Thanks in advance for supporting America s veterans. ** End of Sources Sought Notice **
-Market Research10/30/2026
-AwardedOpen
UltraScan Versa Premier Tables
-Combined Synopsis09/27/2026

Additional Details

Solicitation Number

36C25926Q0542

Archive Date

Jul 15, 2026

Office Address

Greenwood Village, CO, 80111