GovChime
Notice ID: 9caa2051a98c4c6aa03d7a855e6a5fc1JustificationAwardedArchived

4250--FOOD COMPOST/ RECYCLE COMPACTORS

Awarded on December 5, 2025. Full description on SAM.gov.

Awarded tounder 36C26126P0168 (source: SAM.gov award notice)• $558.7K

Overview

Posted
December 11, 2025
Notice type
Justification
NAICS
333310: Commercial and Service Industry Machinery Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
261-NETWORK CONTRACT OFFICE 21 (36C261)
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov
Award date
Dec 5, 2025
Award amount (SAM.gov award notice)
$558.7K

Identifiers

Solicitation number
36C26126Q0114
Notice ID
9caa2051a98c4c6aa03d7a855e6a5fc1

Description

Justification and Approval (J&A) authorizes and approves an exception to fair opportunity; basis as shown in Attachment 1.

Full description on SAM.gov

Award Overview

Award Number

36C26126P0168

Award Amount (SAM.gov award notice)

$558.7K

Award Date

Dec 5, 2025

Awardee

Awardee Address

TRACY, CA 95304, CA

Delivery Order Number

36C26126P0168

Original Solicitation

Notice ID: 9caa2051a98c4c6aa03d7a855e6a5fc1

Posted Date: Dec 11, 2025

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

1
  • 36C24624P1320
    SAN-I-PAK PACIFIC, INC.
    Department of Veterans AffairsNAICS 333310
    —Signed Nov 27, 2024

Contacts

Contracting Officer

Primary Contact

Mohammed Hussain
Contracting Officer
Fax: N/A

Documents

Files (2)

  • P03 FAR 13.5 Sole Source Justification - SAT-9.0M PRINT_Redacted.pdf

    132 KBAdded in Justification version 3Posted
    Download
  • 36C26126P0168_1.docx

    15 KBAdded in Justification version 3Posted
    Download

Lifecycle

  1. 3
    Version 3JustificationArchivedCurrent

    4250--FOOD COMPOST/ RECYCLE COMPACTORS

    Notice 9caa2051a98c4c6aa03d7a855e6a5fc1 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Naval Information Warfare Center, Pacific (NIWC Pacific) hereby publicizes its intention to solicit, negotiate, and award a commercial, Firm-Fixed-Price purchase order on a noncompetitive basis to CleanWay Environmental Partners, Inc. (DBA ADS, Inc.) (CAGE Code 1CAY9) located at 621 Lynnhaven Pkwy STE 160, Virginia Beach, Virginia, 23452-7383. The Government intends to negotiate solely with ADS, Inc. under the authority of FAR 12.102, only one source capable of meeting the Government requirement. The applicable NAICS code is 333310, Commercial and Service Industry Machinery Manufacturing and the business size standard is 1,000 employees. This notice is not a request for competitive quotes; however, interested parties may identify their interest and capabilities in response to this notice, and must clearly show the ability of the firm to be responsive without compromising quality, accuracy, and reliability. Capability statements, comments, questions, or concerns regarding this notice shall be submitted via e-mail. A determination by the Government not to compete the requirement based on responses to this notice is solely within the discretion of the Government. All responding vendors must be registered to the System for Award Management (SAM). Information can be found at https://www.sam.gov. Complete SAM registration means a registered UEI and CAGE Code. It is the responsibility of interested vendors to monitor https://sam.gov for any amendments, which may be issued to this announcement. To respond to this announcement, any comments, questions or concerns may be submitted via e-mail to trinity.l.anglo.civ@us.navy.mil by 23 March 2026 at 1100 Pacific. In your inquiry, please reference N66001-26-Q-6079 in the subject line. Questions by phone or fax will not be considered. Be advised that the aforementioned information is anticipatory in nature and is not binding. See attached Notice of Intent for more details regarding this requirement.
-Pre-Solicitation03/23/2026
The Naval Air Warfare Center Weapons Division at China Lake, CA intends to procure on an other than full and open competitive basis. This requirement is sole sourced to Cordin, 2460 South Main, Salt Lake City, UT 84115 as they are the only company that can make repairs on their own equipment (Model 640, Model 1231 S/N C164, and Model 1209). This is part of an existing system. This notice of intent is not a request for competitive proposals; however, any firm believing it can fulfill the requirement identified above may submit a written response to donell.e.duenassims.civ@us.navy.mil no later than 5 days after the date of publication of this notice, which shall be considered by the agency. The written response shall reference solicitation number N6893626SIMACQD550000E5500000137 and provide a capability statement that clearly indicates the firm’s experience, assets, background, and ability to perform the required work without compromising the quality, accuracy, reliability, and schedule. All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/. Going forward, all new entities registering in GSA's System for Award Management (SAM), as well as existing registrations being updated or renewed, will require the submission of an original, signed notarized letter identifying the authorized Entity Administrator for the entity associated with the Data Universal Numbering System (DUNS) number. Effective June 11, 2018, entities who create or update their registration in SAM.gov to apply only for federal assistance opportunities such as grants, loans, and other financial assistance programs, have a notarized letter on file within 30 days of registration. Additionally, Effective June 29, 2018, all non-Federal entities who create or update their registration in SAM.gov, have a notarized letter on file within 30 days of registration. It is recommended that all interested parties be aware that processing this additional information may take several days and are proactive in maintaining the SAM registrations in an "Active" status as the government cannot award to an entity without an "Active" SAM registration. More information can be found at www.gsa.gov/samupdate.
-Special Notice03/23/2026
See attached Request for Quotation (RFQ) solicitation [Document Number 36C10D27Q0011] posted on October 29, 2026. Reference the Statement of Work in Section B.3 on Pages 6-9 of this RFQ solicitation. Reference the Instructions to Offerors in Section E.2 on Pages 35-39 of this RFQ solicitation. Reference the Evaluation Factors in Section E.9 on Pages 45-46 of this RFQ solicitation. See attached Amendment of Solicitation [Document Number 36C10D27Q0011 0001] posted on November 5, 2026.
-Solicitation11/12/2026
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Combi Oven product line as a candidate for a VA-wide (otherwise referred to as “national”) Requirements contract. Combi Ovens are thermally insulated chambers used in cooking for warming, cooking, and baking food, typically fueled by either natural gas or electricity. Food service ovens have thermostatic controls, which turn the oven on and off and select the temperature at which the oven will operate, and, usually, a timer. Food service ovens may have complex, computer-based controls allowing a wide variety of operating modes. They may be freestanding or countertop units. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Combi Oven to be used by cooks within the VA medical centers and facilities, Continental United States (CONUS) and Outside the Continental United States (OCONUS). The period of performance is for a base of 12-months with four 12-month option periods. Please see the RFP and attachments for more information.
-Solicitation10/21/2026
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. AMENDMENT 01 Hi, The following Addendum is being issued for the subject Request for Quotation: 368931_DispersiveMirror_SAMPOST Clarification Questions: Yes a brand Name or Equal product would be acceptable. Certain manufacturers designate the primary HR/GDD coating on S2 rather than S1, while maintaining the specified S1 surface quality (5/3 × 0.04) and flatness (PV < &lambda;/10). Would this configuration be considered technically acceptable, provided the optic meets all other specified performance and dimensional requirements? As long as the HR side meets requirements, then yes. Angle of Incidence (AOI): Would an optic specified for an operating AOI range of 5°–6° satisfy the stated 5° AOI requirement? Yes, 5 degrees acceptable. Please provide a price and lead time quotation by COB 11/9/2026. This Addendum modifies the Request for Quotation and must be acknowledged. Failure to acknowledge all addenda could make your proposal non-responsive. Please confirm that the submitted proposal is not changed because of this addendum. If proposal sent is revised because of this, please submit the revised proposal. The following changes are hereby made to the appropriate documents containing the above-mentioned Request for Quotation (RFQ). All other terms and conditions of the RFQ remain the same. Kind regards, Marissa Tanomrat Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Email: marissat@slac.stanford.edu Please review the listed requirements and provide your best and final offer for both price and lead-time. The follow has been attached for you to complete and review: Representations & Certifications Rider Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023) Confirm Attached SLAC terms are accepted: SLAC General Terms and Conditions Supplemental Rider (Rev. August 2026) Request for Quote: Required item(s) listed below: HD120+AR Ultra Precision (FS 38.1mm dia. X 12.7mm thk. Pl (192)) QTY: 150 CM2699 (FS 38.1mm dia. X12.7mm thk,PL (192) QTY: 80 Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA). Technical evaluation criteria are as follows: Highly Dispersive Mirrors HD120+AR Ultra Precision (FS 38.1mm dia. X 12.7mm thk. Pl (192)) Features: Optics Type: Highly Dispersive Mirror Design Name: HD120 Central Wavelength CW (nm): 1030 Minimal Wavelength WLmin (nm): 935 Maximal Wavelength WLmax (nm): 1125 GDDr (fs²): -200 Angle of Incidence AOI (deg): 5 Minimal Reflectance Rmin (%): 99.9 Polarization: p Surface 2: AR Stress Compensation Substrate (pre-coat spec.) Material: Corning 7980 0F Dimensions: 38.1mm dia. x 12.7mm thk. Diameter tolerance: +0/-0.1mm Thickness tolerance: +/-0.1mm Configuration: Pl/Pl Radius: S1&S2: Infinity S1 & S2 polished, other surfaces fine ground Surface quality: S1: 5/3x0.04, S2: Commercial polish Flatness: S1: PV<1/10L@632.8nm within CA, S2 NA Clear aperture: >80% Parallelism: <10arcmin Chamfer: Break sharp edges Standard: ISO 10110 Marking: UFI log and arrow to S1, 6-digit serial number tracked Qty 150. Chirped mirrors: CM2699 (FS 38.1mm dia. x 12.7mm thk. Pl (192)) Features: Optics Type: Chirped Mirror Design Name: CM2699 Central Wavelength CW (nm): 1035 Minimal Wavelength WLmin (nm): 950 Maximal Wavelength WLmax (nm): 1120 GDDr (fs²): -50 Minimal Reflectance in Average Raver,min (%): 99.9 Angle of Incidence AOI (deg): 5 Polarization: p Surface 2: AR Stress Compensation Substrate (pre-coat spec.) Material: Corning 7980 0F Dimensions: 38.1mm dia. x 12.7mm thk. Diameter tolerance: +0/-0.1mm Thickness tolerance: +/-0.1mm Configuration: Pl/Pl Radius: S1&S2: Infinity S1 & S2 polished, other surfaces fine ground Surface quality: S1: 5/3x0.04, S2: Commercial polish Flatness: S1: PV<1/10L@632.8nm within CA, S2 NA Clear aperture: >80% Parallelism: <10arcmin Chamfer: Break sharp edges Standard: ISO 10110 Marking: UFI log and arrow to S1, 6-digit serial number tracked Qty 80 Past performance: The Offeror will be evaluated for successful completion and delivery of parts of a similar size and complexity in the last four (4) years based on the documentation submitted on prior manufacturing and test plans. SLAC will consider the historical reliability and performance of such parts integration into SLAC systems, if available. Manufacturing capabilities and capacity (including lower-tier subcontractors) Offeror shall submit a manufacturing plan demonstrating that the Offeror’s resources and project management support are adequate to deliver the system on schedule, using a quality-controlled manufacturing process, adequate procurement capabilities, fabrication facilities and testing facilities. Please provide a price and lead time quotation by COB 11/5/2026 Please be advised that the requirement was also posted on SAM.gov. Send quote to marissat@SLAC.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. Buy American Act Certification (BAA) applies to items that have a unit price that is over $15,000. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. Please include in your proposals the Harmonized Tariff Schedule (HTS Code) & ECCN if applicable. All subcontractors are required to register in the System for Award Management (www.sam.gov). The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) and SLAC General Terms and Conditions Supplemental Rider (Rev. August 2026) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 (SLAC is unable to make advance payments and or Prepayments). For Small Business, SLAC offers Net 15. Freight terms will be FOB Destination Prepaid and Add Foreign Vendors Shipments will be made CIP SLAC, Menlo Park, and Duty Unpaid. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind regards, Marissa Tanomrat Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Email: marissat@slac.stanford.edu
-Solicitation11/05/2026

Additional Details

Solicitation Number

36C26126Q0114

Archive Date

Feb 9, 2026

Office Address

MATHER, CA, 95655