Notice ID: 8d46b15fe75746dba3283572463c537fSources Sought
5963--678-23-1-671-0001 TUC_DIRECTORS CONF RM AV EQUIP (VA-22-00103882)
Archived on February 25, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:30 PM UTC−08:00
- Posted
- December 20, 2022
- Notice type
- Sources Sought
Notice details
- Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262)
- Place of performance
- Southern Arizona VA Health Care System 3601 S. 6th Ave Tucson, AZ, 85723
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- 36C26223Q0325
- Notice ID
- 8d46b15fe75746dba3283572463c537f
Description
This is a SOURCES SOUGHT ANNOUNCEMENT ONLY. It is neither a solicitation announcement nor a request for proposals or quotes and does not obligate the Government to award a contract. Requests for a solicitation will not receive a response. Responses to this sources sought must be in writing. The purpose of this sources sought announcement is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified Service-Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses interested and capable of providing the services described below. Documentation of technical expertise must be presented in sufficient detail for the Government to determine that your company possesses the necessary functional area expertise and experience to compete for this acquisition. Responses to this notice shall include the following: (a) company name (b) address (c) point of contact (d) phone, fax, and email (e) UEI number (f) Cage Code (g) Tax ID Number (h) Type of small business, e.g. Services Disabled Veteran Owned small Business, Veteran-owned small business and (i) must provide a capability statement that addresses the organizations qualifications and ability to perform as a contractor for the work described below. The Southern Arizona Veterans Health Care System (SAVAHCS) has a requirement, located at 3601 S. 6th Ave. Tucson, AZ 85723 for the installation of A/V System installation for the Southern Arizona VA Health Care System (SAVAHCS). Requirements: The Southern Arizona VA Health Care System requires a service agreement to provide preventive maintenance, semi-annually and annually that encompasses calculation and analysis of the various rooms described in the Statement of Work. 1. Contract Title. A/V System installation for Bldg.1 Director Conference Room (DCR) 2. Background. As part of the DCR A/V upgrade, the Southern Arizona VA Health Care System (SAVAHCS) has a requirement for a Crestron Certified (Certified Programmer or Crestron Certified Master Programmer) Integrator/Vendor to purchase and install Audio/Video equipment (A/V), Vtel equipment, and required infrastructure. 3. Scope. Integrator/Vendor will provide all necessary parts, equipment, tools, labor, and other required resources to install an integrated A/V system and Vtel system in one location of the DCR A/V upgrade project. NOTE: All Crestron modules, excluding cables and speakers, will be provided by the ET Section; see item 8.3 for full listing. The Integrator/vendor will program all equipment with inputs from the ET Section. An ET Section employee will assist in the design/layout/appearance of the TSW-760-B-S control panel. A copy of all programming code will be given to the ET Section via DVD, or USB device prior to the Integrator/Vendor leaving the facility. The A/V systems will need to be Teams compatible and if necessary separate microphone(s) will be utilized. The Integrator/Vendor will install all equipment and infrastructure in accordance with (IAW) industry standards; unless superseded by local policy. All wiring infrastructure will be routed inside the wall or ceiling. All wiring entry and exit points on the wall(s) will be properly covered with an ivory faceplate. Any wiring that is required to be routed above the ceiling will be placed in a cable tray if available. If no cable tray is available, wiring must be routed and secured in a such manner that it is not in contact with the ceiling grid, any electrical conduits, or sprinkler system piping. Wire bundles, both in the ceiling and in the A/V rack, will be secured/bundled with double sided Velcro. Zip ties will not be used. Any above ceiling junction boxes will have a cover plate. See 9.1.2 for specific Integrator/Vendor certification requirements; proof of certification required. 4. Specific Tasks. 4.1 Task 1: Check-in. Before doing any work, the Integrator/Vendor will check-in with Biomedical Engineering/ Electronics Technician Section every day they are on-site. 4.1.1 Subtask 1- Assigning a person of contact. There will be a person of contact (COR &/or ET) from Biomedical Engineering to oversee the work accomplished. 4.1.2 Subtask 2-Filling out the log book. The Integrator/Vendor will fill out a log provided by Biomedical Engineering that states: the contractor s credentials, the nature of the visit, and the timeframe of the visit. The Integrator/Vendor will receive a SAVAHCS contractor s badge when they check-in and will return the badge when they check-out. Integrator/Vendor must fill out the logbook everyday even if his/her badge is good for multiple days (five (5) days max). 4.2 Task 2: Check-Out. Integrator/Vendor will return their SAVAHCS contractor s badge upon checking out, before they leave the site. If the contractor returns his/her badge outside of normal duty hours, the contractor is to leave it in the Biomedical Engineering drop box. Normal duty hours are defined as Monday-Thursday, 0800-1630, excluding federal holidays. Deliverables: Contractor s badge 4.3 Task 3: The integrator shall provide the labor, materials, and tools needed to install the following in the DCR: 4.3.1 Subtask 1- Audio/Video Equipment. 4.3.1.1 Three (3) each 85 Sony Television, KD-85X85J or similar (locations will be marked). The inputs video input shall be extended from the Crestron DMPS3-4K-300-C to the monitor. Monitor will be mounted on the wall. 4.3.1.2 One (1) each Crestron 4K DigitalMedia 8G+ Transmitter 202 DM-TX-4K-202-C to integrate with Crestron DMPS3-4K-300-C. 4.3.1.3 One (1) each Denon DN500BD Blu-Ray player with output connected to the Crestron DMPS3-4K-300-C. 4.3.1.4 One (1) each Crestron DMPS3-4K-300-C (inputs will be the Cisco SX80 and Blu-Ray player). Programming by a certified Creston Programmer will be required to fully integrate all inputs and outputs. 4.3.1.5 One (1) each TSW-760-B-S control panel mounted on wall and connected to the Crestron DMPS3-4K-300-C. Programming by a certified Creston Programmer will be required to fully integrate all inputs and outputs. 4.3.1.6Three (3) each Pyle 6.5 In Ceiling Dual Stereo Speaker PDIC66, ceiling speakers and wiring will be installed in a manner that best provides audio coverage for the entire space. 4.3.1.7 Three (3) each ceiling microphones (ClearOne 910-001-014-W, or similar) and wiring will be installed in a manner that allows all audience members to participate in all Teams & Vtel calls. NOTE: If necessary separate microphone(s) for Teams will be utilized and connected directly to the PC. 4.3.1.8 One (1) each Dual-channel Modular Power Amplifier (100w/Ch. 70 v) will be connected to the line out of the DMPS3-4K-300-C. The output of this amplifier will be connected to the ceiling speakers. 4.3.1.9 Three (3) Sony SRG-120D 12X PTZ Desktop Cameras SRG120DS to be wall mounted. Cameras and wiring will be install in a manner that best provides audio coverage for the entire space. 4.3.2 Subtask 2- Vtel Equipment. 4.3.2.1 One (1) each Cisco Webex Tele Presence System with front and rear Cisco TelePresence Precision HD cameras. The Cisco SX80 output will be connected to the Crestron DMPS3-4K-300-C. Cameras will be wall mounted and centered above the front and rear monitors. 4.3.3 Subtask 3- Equipment Rack. 4.3.3.1 One (1) each 12U pull out rack. Rack will be installed in a credenza. 4.4 Task 4: The Integrator/Vendor shall comply with all the following: 4.4.1 Subtask 1. ANSI/EIA/TIA 568-B (Commercial Building Telecommunications Standard) 4.4.2 Subtask 2. ANSI/EIA/TIA 569-A (Commercial Building Standards for Telecommunications Pathways and Spaces) 4.4.3 Subtask 3. ANSI/EIA/TIA 606-A (Administration Standard for the Telecommunications Infrastructure of Commercial Buildings) 4.4.4 Subtask 4. ANSI/EIA/TIA-607 (Grounding and Bonding Requirements for Telecommunications in commercial Buildings) 5. Performance Monitoring 5.1 A Biomedical Engineering Department Electronics Technician (ET) will monitor all aspects of the Integrator s/Vendor s work. An initial inventory of equipment will be performed to ensure the equipment required matches the equipment received. Once on the worksite, the ET will ensure all VA safety and cleanliness requirements are met. In process inspections will also be conducted to ensure that the contract requirements are being met. Following the installation of all equipment an operational check of the systems will be performed. 6. Security Requirements 6.1 The area of work is not in a security-sensitive location. 7. Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). 7.1 IT will provide a PC for each location. Model number, Serial Number, or EE# will not be known until the equipment is installed by IT. 7.2 Interior Design will order the credenza where the A/V rack will be installed. 7.3 The ET Section will provide the following equipment for this location. Manufacturer Material Description Manufacturer Part Number Crestron 7" Touch Screen, Black Smooth TSW-760-B-S Crestron 3 Series 4K DigitalMedia Presentation System 300 DMPS3-4k-300-C Crestron 4K DigitalMedia 8G Receiver and Room Controller w/Scaler DM-RMC-4K-SCALER-C Crestron Avia 12x8 Digital Signal Processor w/ Dante, USB, Audio, AEC, and Conferencing Interface DSP-1283 Crestron Dual-Channel Modular Power Amplifier, 100w/Ch., 70v AMP-2100-70 Crestron 150W PoDM Power Pack for DM 8G+ I/O Blades and DMPS3-4K-200/300-C PW-4830DUS Crestron 5-Port PoE Switch CEN-SW-POE-5 8. Other Pertinent Information or Special Considerations. 8.1 Crestron equipment must be used. This facility moving to a standardized conference room system using Crestron equipment controlled by Crestron Fusion software. 8.1.2 Certification requirements (proof of certification required). 8.1.2.1 Crestron Certified Programmer (minimum) 8.1.2.2 Crestron Master Programmer (preferred) 8.2 All cables will be labeled to annotate device connection. For example, the HDMI cable from the Blu-Ray player to the Crestron DMPS3-4K-300-C will have either Blu-Ray or DVD annotated on it near the output end of the cable. 8.3 Identification of Potential Conflicts of Interest (COI). 8.3.1 There is no known. conflict of interest 8.4 Packaging, Packing and Shipping Instructions. 8.4.1 Equipment required for this project will be delivered to Bldg. 14 Warehouse and then stored in Bldg. 16 until the work begins. 8.5 Inspection and Acceptance Criteria. 8.5.1 Prior to certification a final walk through will be performed by a Biomedical Engineering Supervisor, ET, and the contractor. During this walk through all equipment will be inspected and a system operational check will be completed. 8.5.2 All programming and codes used to program the Crestron Equipment will be given to the ET section prior to the final inspection. 8.6 A pre-bid walk through shall be performed. 9. Risk Control 9.1 OSHA 29 CFR 1926 and 1910 standards will be followed. 10. Place of Performance. 10.1 All work will be performed in Bldg. 1 on the main SAVAHCS campus located in Tucson AZ. 11. Period of Performance. 11.1 Work to be started within 90 days of contract award. Award date, start date, and estimated completion date TBD. The delivery of gray market items to the VA in the fulfillment of an order/award constitutes a breach of contract. Accordingly, the VA reserves the right enforce any of its contractual remedies. This includes termination of the contract or, solely at the VA s election, allowing the Vendor to replace, at no cost to the Government, any remanufactured or gray market item(s) delivered to a VA medical facility upon discovery of such items. Important information: The Government is not obligated to nor will it pay for or reimburse any costs associated with responding to this sources sought synopsis request. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. The Government will in no way be bound to this information if any solicitation is issued. The VA is mandated by Public Law 109-461 to consider a total set-aside for Service-Disabled Veteran Owned Small Business set aside. However, if response by Service -Disabled Veteran Owned Small Business firms proves inadequate, an alternate set-aside or full and open competition may be determined. No sub-contracting opportunity is anticipated. The North American Classification System (NAICS) code for this acquisition is 811210 Electronic and Precision Equipment Repair and Maintenance ($34.0Mil). Notice to potential offerors: All offerors who provide goods or services to the United States Federal Government must be registered in the System for Award Management (SAM) at www.sam.gov and complete Online Representations and Certifications Application (ORCA). Additionally, all Service- Disabled Veteran Owned Businesses or Veteran Owned Businesses who respond to a solicitation on this project must be registered with the Department of Veterans Affairs Center for Veterans Enterprise VetBiz Registry located at http://vip.vetbiz.gov. All interested Offerors should submit information by e-mail to william.cornick@va.gov. All information submissions shall be received no later than 4:30 PM Pacific Standard Time on Thursday, December 27, 2022. After review of the responses to this announcement, the Government intends to proceed with the acquisition and a subsequent solicitation may be published.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
36C26223Q0325- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentDec 20, 2022
5963--678-23-1-671-0001 TUC_DIRECTORS CONF RM AV EQUIP (VA-22-00103882)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Department of Veterans Affairs, Network Contracting Office 23 intends to award a sole source contract under the authority of FAR 6.103-1/FAR Overhaul 12.102(a) Only one responsible source and no other services will satisfy agency requirements to Draeger, Inc., to provide Anesthesia Equipment Maintenance Service for the Veterans Integrated Service Network 23. This notice of intent is not a request for quotations; interested parties may express their interest by providing a capabilities statement no later than November 6th, 2026 at 16:30 CT. The capabilities statement must provide clear and unambiguous evidence to substantiate the capability of the party to provide the required services. A determination not to compete this proposed contract upon responses to this notice is solely within the discretion of the Government. Verbal responses are not acceptable and will not be considered. When responding to this announcement, respondents should refer to Announcement, Notice of Intent. If after November 6th, 2026 no viable responses have been received in response to this announcement, Department of Veterans Affairs shall negotiate solely with Draeger, Inc. This notice of intent to award a sole source contract is not a request for competitive quotes. There will be no solicitation available for competitive quotes. Phone calls will not be accepted. All responses must be received by 16:30 PM CST on Friday, November 6th, 2026. Responses shall be submitted electronically to Traci Johannes via email at traci.johannes@va.gov. Fax responses and Telephone inquiries will not be accepted. | 56% | Special Notice | 11/06/2026 |
PM IMAGINE UPS SERVICE CONTRACT | 46% | Solicitation | 12/07/2026 |
PM Imaging UPSs Service | 46% | Pre-Solicitation | 11/18/2026 |
ALCON CONSTELLATION LXT PHACOEMULSIFICATION UNITS AND EMBEDDED LASERS PMI SERVICES | 46% | Combined Synopsis | 11/27/2026 |
J065--ALCON CONSTELLATION LXT PHACOEMULSIFICATION UNITS AND EMBEDDED LASERS PMI SERVICES | 2026-2031 This is a SOURCES SOUGHT ANNOUNCEMENT ONLY. It is neither a solicitation announcement nor a request for proposals or quotes and does not obligate the Government to award a contract. Requests for a solicitation will not receive a response. Responses to this Sources Sought must be in writing. The purpose of the sources sought announcement is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified Service-Disabled Veteran Owned Small Businesses and Veteran Owned Small Businesses interested and capable of providing the services described below. Documentation on technical expertise must be presented in sufficient detail for the Government to determine that your company possesses the necessary functional area expertise and experience to compete for this acquisition. The North American Classification System (NAICS) code for this acquisition is NAICS: 811210 Electronic and Precision Equipment Repair and Maintenance ($34M). PSC: J065 Maintenance, Repair, and Rebuilding of Equipment Medical, Dental, and Veterinary Equipment and Supplies. Responses to this notice shall include the following: (a) Company name (b) Address (c) Point of contact (d) Phone, fax, and email (e) DUNS number (f) Cage Code (g) Tax ID Number (h) Type of small business, e.g. Services Disabled Veteran Owned Small Business, Veteran owned small business (i) Must provide a capability statement that addresses the organization s qualifications and ability to perform as a contractor for the work described below. (j) Provide estimated pricing if you were to price today. The Veterans Health Administration (VHA) has a requirement at the Long Beach VA Medical Center, located at 5901 E 7th Street, Long Beach, CA 90822, for ALCON CONSTELLATION LXT PHACOEMULSIFICATION UNITS AND EMBEDDED LASERS PMI SERVICES. STATEMENT OF WORK ALCON CONSTELLATION LXT PHACOEMULSIFICATION UNITS AND EMBEDDED LASERS PMI SERVICES Background: The Long Beach VA Healthcare system requires preventative maintenance and inspection services for the Government Owned Alcon Constellation LXT Phacoemulsification units and embedded lasers. Scope: The services to be provided by the contractor under this agreement shall consist of furnishing all necessary parts, labor, and transportation required to repair and maintain the Government-owned Alcon Constellation LXT Phacoemulsification Units and Embedded Lasers under the terms and conditions of a full-service contract. All services shall cover the following VA Long Beach owned equipment: Constellation LXT EE: 123087/SN: 1501747401X Embedded laser EE: 123433/SN: 1501827501X Constellation LXT EE: 140760/SN: 1901579701X Embedded laser EE: 140761/SN: 1901784401X Services to be Provided: Ongoing Support Services: Technical Telephone Support. Monday through Friday, between 8:00 a.m. and 5:00 p.m. Pacific Standard Time Preventative Maintenance: Preventative Maintenance Inspections (PMIs) will be done at the Original Equipment Manufacturer s recommended frequency in accordance with the VA Long Beach s maintenance schedule and OEM standards. Preventive maintenance should be scheduled during normal hours with, at minimum, three (3) days in advance with Biomedical Engineering s Point of Contact. A check-up of the covered products including wear and tear parts check according to manufacturer s guidelines during system inspection and calibration. It is the sole responsibility of the contractor to perform all preventive maintenance inspections. The VA will not assume the responsibility of reminding the contractor that a preventive maintenance inspection is due to be carried out. If a PM is not performed within the month specified, the amount corresponding will be deducted from the contractor s payments. No other parts and/or test equipment shall be provided by the Government for the performance of this contract. Contractor shall, without exception, provide all hand tools, diagnostic test equipment, ladders, and anything else necessary to perform the work. Corrective Maintenance: Repair and labor time to correct an equipment in case of malfunction. When repairs are needed between regular scheduled service. Service also includes all necessary intervening service calls required to replace any worn or defective parts needed due to instrument failure and maintain equipment in optimum operating condition. Parts: The contractor will supply, at its own expense, necessary factory-certified equipment manufactured parts, if replacement of the parts is required because of normal wear and tears, or outright failure or as otherwise deemed necessary by the contractor. Hardware and software upgrades will be scheduled and performed during normal working hours, at no additional charge to the VA. These upgrades are those required for the correct function of the system; not those purchased to enhance function. The contractor shall supply and install software updates to include periodic updates, enhancements and corrections to the software so as to cause the software to perform according to its specification, documentation, or demonstrated claims Labor: The contractor will provide all labor associated with the repair of the equipment covered under the contract agreement. Inadequate or improper repairs performed by the contractor will be correctly repaired at a time convenient to the VA at no additional expense to the VA. There will be no limitation to the number of labor hours provided within the stipulated timeframes of contract coverage. Response Times: Contractor will acknowledge requests by telephone for service within 2 hours. The contractor shall contact the Biomedical Engineering Point of Contact, (562) 826-5977 before and after arrival at the site. If the problem cannot be corrected by phone, or via remote access, the contractor shall commence work with on-site, physical response within 24 hours of receipt of the first notification or as approved by the COR. All required repairs shall commence without undue delay with the system corrected to include replacing malfunctioning parts and retesting the system within 48 hours. The vendor agrees and understands that before any connection to these devices using vendor supplied equipment (laptop or USB drive devices) those devices must be scanned for malicious code or other malware by the Biomedical engineer or ISO. Reporting Procedures: The Contractor must report to the Biomedical Engineering Department (Building 5, Room 138) to sign the visitor logbook. In addition to signing-in, the Contractor personnel shall wear their VA issued badge and identify him/herself to the Using Service before proceeding to the job site. For services to be performed outside normal working hours, the Contractor must obtain approval from the Biomedical Engineering Point of Contact prior to performing any afterhours work. If the afterhours request is approved, the Contractor must report to the Biomedical Engineering Department (Building 5, Room 138) to sign the visitor logbook and pick up a visitor badge. In addition to signing-in, the Contractor personnel shall identify him/herself to the Using Service before proceeding to the job site. Prior to leaving the facility, the Contractor shall communicate status of equipment to the Using Service and sign out of the logbook in the Biomedical Engineering Department. Note: To ensure proper equipment history documentation, the contractor will forward all preventive maintenance records within 5 working days of completion to Biomedical Engineering. Documentation: For Preventive Maintenance, Contractor will provide a PM checklist to VA Long Beach Biomedical Engineering, listing each action taken to complete the maintenance. Contractor will provide individual results which describe services performed (in sufficient detail to be acceptable to the field inspectors of The Joint Commission). The following information must be provided in each report: Date of service Summary of problem and action taken Parts replaced Labor hours Travel time Equipment serviced (description, Equipment ID #, serial number, etc.) Purchase order number Note: This report must be approved and signed by Biomedical Engineering personnel or their representative. The service report must be provided to Biomedical Engineering within 5 business days of service provided. A copy of each report will be left with Biomedical Engineering. In the event that Biomedical Engineering is not available to receive the service report (outside normal working hours), the service report will be left with the supervising official of the equipment that was serviced; the supervising official will forward the service report to Biomedical Engineering (138M) the next working day. Qualifications: Contractor shall be engaged full-time in the service and support of the equipment listed in Section I. Contractor shall have access to complete service manuals. Contractor shall have access to software diagnostic keys. Contractor shall provide certified licensed technicians suitable for PMI on Alcon related equipment and devices and must provide proof of certification. Contractor shall have, at minimum, two years of experience providing PMI services related to Alcon vision devices and equipment and must provide proof of experience. Contractor Badging: Compliance with VA Handbook 0735 HSPD-12 Program. To comply with Department of Veterans Affairs (VA) Handbook 0735, Homeland Security Presidential Directive 12 (HSPD-12) requirements, the Prime Contractor shall coordinate with the Program Office Point of Contact regarding all site visits to the VA Long Beach Healthcare System. Badges are mandatory for all contractors and subcontractors entering the facility. The Prime Contractor is responsible for ensuring that all required information and documentation are submitted to the COR with sufficient lead time to allow for proper processing of badge requests. No contractor or subcontractor may begin work onsite without an approved badge, except under emergency conditions as outlined below. Processing Time: Badge issuance may take up to 30 calendar days due to required background checks. The Prime Contractor must begin coordination with the COR immediately upon contract award to avoid repair, service, or project delays. Onsite Visits for Badging: Contractors should anticipate at least two separate onsite visits: One visit for fingerprinting. One visit to pick up the issued badge. Mandatory Training: All contractors and subcontractors must complete mandatory training assigned through the VA s electronic Training Management System (TMS) before badges are issued. This training typically requires approximately two (2) hours to complete. Badge issuance and retention are contingent upon successful completion of this training. Emergency Repairs Exception: In cases where an emergency repair or service is required and the contractor or subcontractor has not yet been issued a permanent VA badge, a temporary day badge may be issued by VA Police for that emergency only. The Prime Contractor must still ensure that permanent badging is pursued without delay following the emergency event. Hours of Coverage: Normal hours of coverage will be Monday through Friday from 7am to 5pm PST. All service/repairs will be performed during stipulated hours of coverage unless requested or approved by Biomedical Engineering. Federal Holidays observed by the VAMC are: Date Holiday Monday, January 01 New Year s Day Monday, January 15 Birthday of Martin Luther King, Jr. Monday, February 19Â * Washington s Birthday Monday, May 27 Memorial Day Wednesday, June 19 Juneteenth National Independence Day Thursday, July 04 Independence Day Monday, September 02 Labor Day Monday, October 14 Columbus Day Monday, November 11 Veterans Day Thursday, November 28 Thanksgiving Day Wednesday, December 25 Christmas Day Important information: The Government is not obligated to nor will it pay for or reimburse any costs associated with responding to this Sources Sought synopsis request. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. The Government will in no way be bound to this information if any solicitation is issued. The VA is mandated by Public Law 109-461 to consider a total set-aside for Service-Disabled Veteran Owned Small Business set aside. However, if response by Service-Disabled Veteran Owned Small Business firms proves inadequate, an alternate set-aside or full and open competition may be determined. No sub-contracting opportunity is anticipated. Notice to potential offerors: All offerors who provide goods or services to the United States Federal Government must be registered in the System for Award Management (SAM) at www.sam.gov and complete Online Representations and Certifications Application (ORCA). Additionally, all Service- Disabled Veteran Owned Businesses or Veteran Owned Businesses who respond to a solicitation on this project must be listed as verified on the Veteran Small Business Certification (VetCert) database at https://veterans.certify.sba.gov/. All interested Offerors who meet the criteria above should submit information by e-mail to naomi.meza@va.gov. All information submissions shall be received no later than 12:00 PM Pacific Standard Time on Wednesday, October 28, 2026. | 46% | Market Research | 10/28/2026 |
Additional Details
Solicitation Number
36C26223Q0325
Archive Date
Feb 25, 2023
Office Address
Gilbert, AZ, 85297