Notice ID: 7b1eefcf10e34fc18b8f1ff40c392348Award NoticeAwarded
6525--DERMATOLOGY MICROSCOPE
Awarded on September 12, 2023. Full description on SAM.gov.
Awarded tounder 36C26223P2368 (source: SAM.gov award notice)• $35.3K
Overview
- Posted
- September 13, 2023
- Notice type
- Award Notice
- NAICS
- 339112: Surgical and Medical Instrument Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Place of performance
- Department of Veterans Affairs Greater Los Angeles Healthcare System 11301 Wilshire Blvd., Los Angeles, 90073
- Last updated
- Sep 9, 2025
- Award date
- Sep 12, 2023
- Award amount (SAM.gov award notice)
- $35.3K
Identifiers
- Solicitation number
- 36C26223Q1484
- Notice ID
- 7b1eefcf10e34fc18b8f1ff40c392348
- Award number (PIID)
- 36C26223P2368
Description
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26222Q1484 is issued as a Request for Quotation (RFQ). (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular. (iv) This solicitation is to be fulfilled through a 100% SDVOSB set aside, using NAICS Code 339112 having a size standard of 1,000 employees. (v) Vendor must be a verified SDVOSB in VETBIZ.gov at the time of solicitation. SCHEDULE OF SUPPLIES: (vi) The US Government, Veterans Affairs (VA) seeks to make a procurement for the VA Greater Long Beach Healthcare System Offeror quotations must demonstrate meeting the salient physical, functional, or performance characteristic specified in this solicitation, otherwise it will be considered non-responsive. The technical specifications for this requirement are listed for Brand Name or Equal per FAR 52.211-6. The information identified provided is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the brand name or equal to supplies being requested. PARTICIPATING VA HEALTHCARE SYSTEM: VA GLA Healthcare System 11301 Wilshire Blvd. Los Angeles, CA, 90073 2. ROUTINE ORDERS Routine orders require delivery the next business day, unless specified elsewhere in this contract. 3. EMERGENCY ORDERS An emergency delivery requires same day delivery and with the time specified during the placement of order. 4. DELIVERY LOCATION, NORMAL WORK HOURS AND INSTRUCTIONS: Time of delivery specified or mutually agreed to at the time of receipt of telephone orders shall become mandatory upon the Contractor s acceptance to commitment. Delivery of supplies by the scheduled time will be complete except as otherwise authorized by Government personnel. If the Contractor cannot make delivery and an outside source must be utilized, the Contractor will be responsible for paying the difference in cost. 5. RECALLED AND DEFECTIVE PRODUCTS The Contractor will immediately notify the Point of Contact and Contracting Officer of any recalls of product or other important product safety issues. As appropriate, the Contractor will replace and/or reimburse recalled / defective products at no cost to the Government. The Contractor may be liable for costs of processing recalls, i.e. administrative and clinical services to replace recalled / defective products. 6. SAFETY GUIDELINES AND REQUIREMENTS Delivery personnel shall be trained in Radiation Safety Techniques, Nuclear Regulatory Commission, Joint Commission safety guidelines and Department of Transportation requirements. 7. NATIONAL HOLIDAYS OBSERVED BY THE GOVERNMENT New Year s Day January 1 Martin Luther King s Birthday 3rd Monday in January Presidents Day 3rd Monday in February Memorial Day Last Monday in May Independence Day July 4 Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day December 25th The President of the United States of America may declare additional days as a Federal holiday, and if so, this holiday will automatically be added to the list above. When a holiday falls on a Sunday, the following Monday shall be observed as a Federal holiday. When a holiday falls on a Saturday, the preceding Friday shall be observed as a Federal Holiday. 8. CONTRACTOR DELIVERY PERSONNEL All contractor personnel are required to wear clothing bearing the name of the Contractor and wear a badge that has the Contractor name. Contractor personnel must have a picture I.D. and must be able to speak English. 9. PARKING AND SPEED LIMIT Park only in areas designated by the POC or otherwise directed by Police and Security Service personnel. The Contractor shall display on each of its vehicles the company name in a size that is clearly visible. Upon receipt of award, the Contractor shall submit a list of employees and vehicles to the POC of each facility. The Contractor shall conform to the speed limit set at each Government facility. Should Contractor personnel receive a citation for parking, speeding or other infraction from VA Police and Security, the offenses will be handled in Federal Court as they are Federal offenses. 10. PLACEMENT OF VERBAL ORDERS Contractors shall provide on a separate sheet of paper, the name, location, and telephone number of the office where the participating VA facility/POC will call to place orders. 11. INVOICE AND PAYMENT No advanced payments will be authorized. The contractor shall submit invoices on a monthly basis. The invoice must have at a minimum, the contract number, assigned purchase order, assigned obligation number, date order was placed, date order was shipped, and any additional necessary detailed information to identify service rendered. Payment on invoice may be delayed in invoice(s) are not completed properly. 12. PERSONNEL POLICY The parties agree that the contract personnel working this contract shall not be considered VA employees for any purpose and shall be considered employees of the contractor. 13. SMOKING POLICY Smoking is permitted only in designated areas. SALIENT CHARACTERISTICS: 1.Must have stable long-life LED with written 5 year Warranty. 2.Microscope must offer Blue-Light Blocking Filter. 3.Must have Ergonomic Binocular Tube system that offers Tilt, Telescopic adjustment. 4.Must have custom Ergo Binocular Tube height risers. 5.Must have Right and Left Dual Diopters to adjust for User Eye Strength. 6.Must have Dual Height Stage for Ergonomic Adjustment. 7.Must have 2x, 4x, 10x, 20x, and 40x Plan Apo/Fluor Objective and 100x Plan Fluor Objectives. 8.Must have Swing-out 1-100x Triple Lens Condenser with White Viewing Top Lens. 9.Must have Gout Polarizing Analysis capability. 10.Must provide automatic calibration for Scale Bar and Measurement for Camera Software. 11.Must have a Stage that has a rack-and-pinion mechanism for precise movement control. 12.Must have 4 Friction-Free Feet for easy desktop placement. 13.Must include Face-to-Face/FTF, and Side-by-Side/SBS Teaching Head with Ergonomic Binocular Tube with Dual Diopter Right and Left Eyepieces. 14.Teaching Head must be LED, with Red/Green Color option, 360 degree arrow Orientation, and Power Indicator. 15.Must have 5.9MP HD+ Color Digital Camera with integrated Photo Tube that connects directly to Main Binocular Tube for parfocality and ease-of-use. 16.Must have free-standing Controller/Camera with PixelSense Screen for Ultra HD viewing, and fast and easy capture, store and share software. 17.Must have software that provides Annotation, Measurement and Graticule Overlays. 18.Must have a small footprint of no more than 515mm depth; 330mm width; and 604mm nominal height because of limited space and design. 19.Must weigh no more than 65 lb (vii) Delivery Requirements: Place of Delivery VA GLA Healthcare System | 11301 Wilshire Blvd. | Los Angeles, CA, 90073 (viii) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. FAR 52.212-1 Addendum: All offeror quotes for this solicitation must be received electronically through email no later than Thursday, July 27, 2023, 4:00 PM PST. Ensure to reference solicitation number 36C26222Q1484 within subject line of the email. Any offeror quotes received after the prescribed date/time shall be considered late and will not be considered for award. Any questions regarding this solicitation must be received electronically through email no later than Monday, July 24 ,2023, 12:00 PM PST. Offers shall be sent by email to Hanan Chaaban at Hanan.chaaban@va.gov (ix) The provision at FAR 52.212-2, Evaluation -- Commercial Items (Oct 2014), applies to this solicitation. FAR 52.212-2 Addendum / Replacement: (a) The Government will award a contract resulting from this solicitation to the responsive and responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all salient characteristics that is both responsive and responsible. Acceptability of equipment/services shall be established by review of each submitted quotation by the designated evaluator(s) and verification that any equal-to items meet the salient characteristics included in this solicitation. Submissions to this solicitation must show clear, compelling and convincing evidence that equal-to items meet all the salient characteristics. Offers that include any items that are not determined as Brand Name or Equal shall result in an unacceptable offer. See 52.211-6 Brand Name or Equal for additional information. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) AUTHORIZED DISTRIBUTOR LETTER (ADL) Any suppliers, distributors and/or resellers who participate in this solicitation, must be authorized to provide the supplies by the Original Equipment Manufacturer (OEM). An Authorized Distributor Letter (ADL) from the manufacturer shall be included with your response to be considered for award. If the potential Authorized Supplier is not the OEM, the Authorized Supplier must provide an Authorized Distributor Letter from the OEM signed within the last 90 days. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all of the manufacturer s products. This letter must be on the manufacturer s letterhead and contain the signature of an authorized official for the manufacturer. (x) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. (xi) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (OCT 2018) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment. (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments (9) The specification. (t) [Reserved] (u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an I agree click box or other comparable mechanism (e.g., click-wrap or browse-wrap agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. (v) Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of Clause) (xii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL ITEMS (JUN 2020) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204 23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115 91). (3) 52.204 25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115 232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [] (1) 52.203 6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). [] (2) 52.203 13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509). [] (3) 52.203 15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) [] (4) 52.204 10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109 282) (31 U.S.C. 6101 note). [] (5) [Reserved] [] (6) 52.204 14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (7) 52.204 15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (8) 52.209 6, Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note). [] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313). [] (10) [Reserved] [] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-3. [X] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-4. [] (13) [Reserved] [] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020). [] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020) of 52.219-7. [] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)). [] (17)(i) 52.219 9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)). [] (ii) Alternate I (NOV 2016) of 52.219-9. [] (iii) Alternate II (NOV 2016) of 52.219-9. [] (iv) Alternate III (JUN 2020) of 52.219 9. [] (v) Alternate IV (JUN 2020) of 52.219 9. [] (18) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)). [] (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)). [] (20) 52.219-16, Liquidated Damages Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). [X] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f). [] (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C 632(a)(2)). [] (ii) Alternate I (MAR 2020) of 52.219-28. [] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)). [] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (MAR 2020) (15 U.S.C. 637(m)). [] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)). [] (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)) [] (27) 52.222-3, Convict Labor (June 2003) (E.O. 11755). [] (28) 52.222 19, Child Labor Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126). [] (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015). [] (30)(i) 52.222 26, Equal Opportunity (SEP 2016) (E.O. 11246). [] (ii) Alternate I (FEB 1999) of 52.222-26. [] (31)(i) 52.222 35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212). [] (ii) Alternate I (JULY 2014) of 52.222-35. [] (32)(i) 52.222 36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793). [] (ii) Alternate I (JULY 2014) of 52.222-36. [] (33) 52.222 37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212). [] (34) 52.222-40, Notificatio...
Award Overview
Award Number
36C26223P2368
Award Amount (SAM.gov award notice)
$35.3K
Award Date
Sep 12, 2023
Awardee
Awardee UEI
FEVRGJ24CNX5
Original Solicitation
Notice ID: 7b1eefcf10e34fc18b8f1ff40c392348
Posted Date: Sep 13, 2023
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
36C26223Q1484- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisJul 20, 2023
6525--Dermatology Microscope
- AwardedCurrentSep 13, 2023
6525--DERMATOLOGY MICROSCOPE
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Microscope: Spine product line as a candidate for a VA-wide (otherwise referred to as “national”) single Requirements contract award. The microscope provides a stable, maneuverable platform with motorized zoom and focus, long working‑distance lenses, and high‑intensity illumination suitable for deep spinal corridors. It supports hybrid optical/digital viewing, allowing the surgeon to operate through traditional eyepieces or external large‑format 3D monitors. Integrated imaging capabilities provide 4K or higher‑resolution video and still capture for clinical documentation, teaching, and intraoperative collaboration. Systems of this type include fluorescence visualization options (e.g., ICG (indocyanine green)‑based vascular assessment), navigation data overlays, assistant viewing optics, and compatibility with surgical navigation platforms. The microscope is mounted on a mobile, counterbalanced stand or arm designed for smooth, low‑effort repositioning during procedures. It includes OR‑ready connectivity (HDMI/SDI), DICOM/PACS export options, and supports wireless data functions depending on configuration. This equipment is used in neurosurgery, orthopedic spine surgery, and related specialties requiring precise micro visualization during complex spinal procedures. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Microscope: Spine throughout the VA medical centers and facilities located in the Continental United States (CONUS) or Outside of the Continental United states (OCONUS). The period of performance is for a base of 12-months with four 12-month option periods. Please see the Combined Synopsis/Solicitation and Attachments for more information. | 74% | Market Research | 11/17/2026 |
1.0 DESCRIPTION THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation for bids, proposals, proposal abstracts, or quotations. The Department of Veterans Affairs (VA) Enterprise Procurement Office (EPO), formerly the Strategic Acquisition Center (SAC), is issuing this Sources Sought Notice as a means of conducting market research to identify qualified sources with the capability and resources to meet the Veterans Health Administration s (VHA) Non-Expendable Equipment National Program requirement for Microscopes, Light, Operating, Dental. The EPO in conjunction with VHA is seeking qualified sources capable of supplying the ZEISS OPMI PROergo, Microscopes, Light, Operating, Dental on an agency-wide basis. VA is contemplating the award of a single Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contracts, to a supplier of this equipment. Respondents will be required to deliver complete light operating dental microscope systems to VA medical centers and facilities throughout the United States. The associated North American Industry Classification System (NAICS) code for this procurement is 339112 - Surgical and Medical Instrument Manufacturing and the associated size standard is 1,000 employees. The FAR Provision found at 52.204-7 requires that The Offeror shall have an active Federal Government contracts registration in the System for Award Management (SAM) when submitting an offer or quotation. You may access the SAM website at SAM.gov | Home. All respondents must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB respondents must be verified in the SBA database at: https://www.sba.gov/veterans/#vetcert at the time of submission. Submissions for this Sources Sought Notice shall be submitted by email no later than October 16, 2026, at 12:00pm Eastern Time to the Contract Specialist and Contracting Officer at the following email addresses: Alanna.Wilson@va.gov Anthony.Zibolski@va.gov Email responses shall include the following subject line: Response to Sources Sought Notice 36C10X26Q0285. This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to their current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. The Government may or may not issue a solicitation as a result of this notice. There is no solicitation available at this time. 2.0 SCOPE OF WORK Microscopes, Light, Operating, Dental is a specialized magnification and illumination system used in dentistry to enhance visibility of fine anatomical details inside the mouth, especially in FboNotice canals, microsurgery, and restorative work. It is mounted on an articulating arm from the ceiling, wall, floor/mobile, between the patient and clinician, allowing the dentist to see structures at 4 to 25 times their actual size without leaning closer. The ZEISS OPMI PROergo, Microscopes, Light, Operating, Dental has been identified through VA s market research to date as the only known surgical dental microscope capable of a magnification range from 2.0x to 39x, with motorized magnification and focal adjustments for wide-field or detailed views. The following Contract Line Items (CLINs) are being considered: Contract Line Items Manufacturer Part Number Description 0001 Carl Zeiss 000000-2234-65701PADVAN Advanced Package 0002 Carl Zeiss 000000-2234-65701PECEPH Essential Package Halogen 0003 Carl Zeiss 000000-2234-657CENTRO S7 Centro S7 0004 Carl Zeiss 000000-2234-657DECKES7HUB Ceil. mount S7 lifting column 0005 Carl Zeiss 000000-2234-65701PECAPA Advanced Package 0006 Carl Zeiss 000000-2234-657WAND S7 LANG Wallmount S7 long 0007 Carl Zeiss 000000-2234-65701PECEPX Essential Package Xenon 0008 Carl Zeiss 000000-2234-657WAND S7 Wall mount S7 0009 Carl Zeiss 000000-2234-657BODENS7 Floor stand S7 0010 Carl Zeiss 000000-2234-65701PROERGO OPMI PROergo 0011 Carl Zeiss 000000-2234-65720COTI10 Stereo co-observation 180° 0012 Carl Zeiss 000000-2234-657DECKES7STARR Ceiling mount S7 fixed column 0013 Carl Zeiss 000000-2234-657FALT Foldable Tube not mouth switch 0014 Carl Zeiss 000000-2234-657SCHWENK 180° tiltable tube f=170 0015 Carl Zeiss 000000-2234-657SETHERAEUSZWEI Set f.two Heraeus illumin. 0016 Carl Zeiss 000000-2234-65742 VCM-Kit (only Assembly) 0017 Carl Zeiss 000000-2234-65720COST10 Stereo coobs. str. tube 10x 0018 Carl Zeiss 000000-2234-657SPEEDFOKUS-M SpeedFocus with MediLive Tabl. 0019 Carl Zeiss 000000-2234-657SPEEDFOKUS-L SpeedFocus with Lemo cable 0020 Carl Zeiss 000000-2234-65726 flexural element 0021 Carl Zeiss 000000-2234-657SPEEDFOKUS-S SpeedFocus with standard cable 0022 Carl Zeiss 000000-2234-657HD 1Chip HD camera 0023 Carl Zeiss 000000-2234-657SPEED Speedgoat GmbH 0024 Carl Zeiss 000000-2234-657SETHERAEUSEIN Set f.one Heraeus illumin. 0025 Carl Zeiss 000000-2234-657VERKLGR33 Panel pre-inst.set,higher 3,3m 0026 Carl Zeiss 000000-2234-657VERKLSTARR Paneling pre-inst.set,rigid 0027 Carl Zeiss 000000-2234-657XENO Xenon light S7 0028 Carl Zeiss 000000-2234-657WINK_MIT_ROT Angled w/ side port & rot.adap 0029 Carl Zeiss 000000-2234-657HDKAB HD Recorder with cables 0030 Carl Zeiss 000000-2234-657WINK_MIT Angled optics w/ side port 0031 Carl Zeiss 000000-2234-657HDT20 Beam splitter 20 0032 Carl Zeiss 000000-2234-657T20 Beam splitter 20 0033 Carl Zeiss 000000-2234-657FLEXIOSTILL Flexio Still Adapter 0034 Carl Zeiss 000000-2234-657T50 Beam splitter 50 0035 Carl Zeiss 000000-2234-657WINK_OHNE_ROT Angled w/ rot. adapter 0036 Carl Zeiss 000000-2234-657AT50 Beamsplitter 50 0037 Carl Zeiss 000000-2234-657FLEXIOMOTION Flexio Motion Adapter 0038 Carl Zeiss 000000-2234-657HDT50 Beamsplitter 50 0039 Carl Zeiss 000000-2234-657WINKELSCHWALBE Angled optics w.rotable adapt. 0040 Carl Zeiss 000000-2234-657HALO HALO Electronics 0041 Carl Zeiss 000000-2234-657LAMPXEN Spare lamp mod.xenon incl. 2 l 0042 Carl Zeiss 000000-2234-657SETS7STARR Adapt.set rigid S5 Ceil.anchor 0043 Carl Zeiss 000000-2234-657WINK_OHNE Angled w/o side port 0044 Carl Zeiss 000000-2234-657SETS5STARR Adapt.set rigid S5 Ceil.ancho 0045 Carl Zeiss 000000-2234-657VERPBLUE Packaging BlueBox S7 0046 Carl Zeiss 000000-2234-657WINKELSEIT Angled optics with side ports 0047 Carl Zeiss 000000-2234-657FUSS ZOOM FOCUS Foot control panel Zoom Focus 0048 Carl Zeiss 000000-2234-657ADAPTER8400 Adaptation of Canon SLR camera 0049 Carl Zeiss 000000-2234-65710MIT FOC 10x (1x with reticle Focus) 0050 Carl Zeiss 000000-2234-65712,5MIT FOC 12,5x (1x with reticle Focus) 0051 Carl Zeiss 000000-2234-657VORMONT.FLANSCH Pre-installation set 3,0m-3,8m 0052 Carl Zeiss 000000-2234-657VORGR31 Pre-inst. higher 3,1 m 0053 Carl Zeiss 000000-2234-65710MIT 10x (1x with reticle) 0054 Carl Zeiss 000000-2234-65712,5MIT 12.5x 1x format outline reticl 0055 Carl Zeiss 000000-2234-65721 Jig type 21 0056 Carl Zeiss 000000-2234-65710 Boom stand B 0057 Carl Zeiss 000000-2234-65712,5 2x Eyepiece 12.5x 0058 Carl Zeiss 000000-2234-657SETS7HUB Adapt.set lift S5 Ceil.anchor 0059 Carl Zeiss 000000-2234-657DECKENFL Ceiling flange 0060 Carl Zeiss 000000-2234-657WANDSTS7 Wall socket S7 ceiling 0061 Carl Zeiss 000000-2234-657WANDPLATTE S7 Wall plate S7 0062 Carl Zeiss 000000-2234-657VERPZER Packing fragmented 0063 Carl Zeiss 000000-2234-657BLENDE Blende 0064 Carl Zeiss 000000-2234-657STILL INTERFACE Still Interface 0065 Carl Zeiss 000000-2234-657ANBAUS7 Extension kit S7 f. MediLive 0066 Carl Zeiss 000000-2234-657VORKL31 Pre-inst. lower 3,1 m 0067 Carl Zeiss 000000-2234-657IRIS Iris diaphragm for video lense 0068 Carl Zeiss 000000-2234-657MOTION INTERFAC Motion Interface 0069 Carl Zeiss 000000-2234-657BUCHSFUS Connection kit foot control S7 0070 Carl Zeiss 000000-2234-657ASEPSEN Asepsis set Sensera 0071 Carl Zeiss 000000-2234-657VERPDECKEHUB Packaging S7 ceiling power col 0072 Carl Zeiss 000000-2234-657VERPDECKESTARR Packag. S7 ceiling rigid col. 0073 Carl Zeiss 000000-2234-657VERPEWVHF Packag. one-use w/o solid wood 0074 Carl Zeiss 000000-2234-657DRAPE01 Replace Lens Vision Guard 0075 Carl Zeiss 000000-2234-657USBDRIVE USB drive 0076 Carl Zeiss 000000-2234-657SVHS10 S-VHS connecting cable 10m 0077 Carl Zeiss 000000-2234-657VIDSPEZIAL Special video cable for CM 0078 Carl Zeiss 000000-2234-657FUSS Foot control panel 10m 0079 Carl Zeiss 000000-2234-657KEYBOARD Keyboard 0080 Carl Zeiss 000000-2234-657USBSTICK USB memory stick 0081 Carl Zeiss 000000-2234-657DVI DVI Monitor Cable 0082 Carl Zeiss 000000-2234-657DRAPE02 VisionGuard non sterile 0083 Carl Zeiss 000000-2234-657DRAPE88 Mini drape handgrips type 88 0084 Carl Zeiss 000000-2234-657NETZWERKKABEL Ethernet cable 10m, green 0085 Carl Zeiss 000000-2234-657DRAPE70 Drape short type 70 0086 Carl Zeiss 000000-2234-657DVIMONI DVI Monitorcable, 2m 0087 Carl Zeiss 000000-2234-65715M HD-SDI-Videocable 15m 0088 Carl Zeiss 000000-2234-657LAMPHAL 2 halogen spare lamps 0089 Carl Zeiss 000000-2234-65710M HD-SDI-Videocable 10m 0090 Carl Zeiss 000000-2234-6575M HD-SDI-Videocable 5m 0091 Carl Zeiss 000000-2234-657SVHS5 S-VHS connecting cable 5m 0092 Carl Zeiss 000000-2234-657KABELBIND Set of cable binders 0093 Carl Zeiss 000000-2238-13120COTI10 Stereo co-observation 180° 0094 Carl Zeiss 000000-2238-13140UCPSLX UC Superlux 180 for S7 0095 Carl Zeiss 000000-2238-13120UCPSPL Speedfocus Lemo cable 0096 Carl Zeiss 000000-2238-13120UCPSP5 Speedfocus, standard cable 0097 Carl Zeiss 000000-2238-13120COST10 Stereo coobs. str. tube 10x 0098 Carl Zeiss 000000-2238-13110UCPHD 1 Chip HD camera f. PROergo 0099 Carl Zeiss 000000-2238-13120UCPSP Speedfocus for 1Chip HD camera 0100 Carl Zeiss 000000-2238-13120PANELL Panel pre-inst.set,higher 3,3m 0101 Carl Zeiss 000000-2238-13120PANELR Panel f.pre-inst.set, rigid 0102 Carl Zeiss 000000-2238-13120SCOOB Stereo co-observation tube 0103 Carl Zeiss 000000-2238-13120AOSPRA Angled opt. w/ s.p. & rot.adap 0104 Carl Zeiss 000000-2238-13120AOSP Angled optics w/ side port 0105 Carl Zeiss 000000-2238-13120AORA Angl.opt w/o s.p. w/ rot.adap 0106 Carl Zeiss 000000-2238-13110UCPT20 Beamsplitter 20 0107 Carl Zeiss 000000-2238-13120PRER34 Pre-instal. set 3.09 - 3.89m 0108 Carl Zeiss 000000-2238-13120FLEXMO Flexio Motion Adapter 0109 Carl Zeiss 000000-2238-13120FLEXST Flexio Still Adapter 0110 Carl Zeiss 000000-2238-13110UCPT50 Beamsplitter 50 0111 Carl Zeiss 000000-2238-13120PANEL Panel 0112 Carl Zeiss 000000-2238-13120CANONA Adaption Canon SLR 0113 Carl Zeiss 000000-2238-13120ADPT Adapt.set rigid S5 Ceil.anchor 0114 Carl Zeiss 000000-2238-13120ADRIGI Adapt.set rigid S5 Ceil.anchor 0115 Carl Zeiss 000000-2238-13120AO Angled optics w/o side port 0116 Carl Zeiss 000000-2238-13130UCPFCP UC footswitchpin + Footc.panel 0117 Carl Zeiss 000000-2238-13140UCPLX Spare lamp module xenon 0118 Carl Zeiss 000000-2238-13120PREL34 Pre-instal. set 3.1m to 3.9m 0119 Carl Zeiss 000000-2238-13120UCZOFO Foot control panel Zoom Focus 0120 Carl Zeiss 000000-2238-13120ADLIFT Adapt.set lift. S5 Ceil.anchor 0121 Carl Zeiss 000000-2238-13120WALLP Adapterplate for S7 wall mount 0122 Carl Zeiss 000000-2238-13120BRA Binocular Rotator Adapter 0123 Carl Zeiss 000000-2238-13120PRER3 Pre-instal. set lower 3.09m 0124 Carl Zeiss 000000-2238-13120MOTINT Motion Interface 0125 Carl Zeiss 000000-2238-13120UCDIA Double Iris diaphragm 0126 Carl Zeiss 000000-2238-13120STIINT Still Interface 0127 Carl Zeiss 000000-2238-13120UCS7IT Instrument tray S7 floor stand 0128 Carl Zeiss 000000-2238-13120PREL3 Pre-instal. set lower 3.1m 0129 Carl Zeiss 000000-2238-13120UCASST Sterilizable Asepsis Caps 0130 Carl Zeiss 000000-2238-13120UCDP01 VG repl. lens sterile, 20pc 0131 Carl Zeiss 000000-2238-13110UCPSCB Special video cable for CM/WM 0132 Carl Zeiss 000000-2238-13120UCFCP Connect.kit foot contr.panelS7 0133 Carl Zeiss 000000-2238-13120UCDP02 VG repl. lens, n-sterile, 10pc 0134 Carl Zeiss 000000-2238-13110UCPDV System cable DVI-D, 5m 0135 Carl Zeiss 000000-2238-13120ACAP27 6x sterilizable caps 27mm 0136 Carl Zeiss 000000-2238-13120UCDP88 drapes, type 88, pack of 20 0137 Carl Zeiss 000000-2238-13120UCDP70 drapes, type 70, pack of 5 0138 Carl Zeiss 000000-2238-13120UCHAL 2x Halogen lamp 12 V, 100 W 0139 Carl Zeiss 000000-2238-13120ACAP49 6x sterilizable caps 49mm 0140 Carl Zeiss 000000-2238-13120ACAP22 6x sterilizable caps 22mm 0141 Carl Zeiss 000000-2003-213 1yr OPTIME service Respondents should identify a complete solution including associated accessories, as required for full functionality. The following Minimum Technical Requirements (MTRs) are being considered: Magnification range shall include at least 2.5× at the low end and at least 16× at the high end, with motorized magnification and focal adjustments for wide-field or detailed views Coaxial illumination: Light travels along the same line of sight as the lens, reducing shadows and improving clarity in deep, narrow spaces Illumination at working distance > 90,000 lux, High-intensity coaxial light, micro dentistry focused Integrated optics: Apochromatic or high-fidelity lenses for accurate color, sharpness, and depth perception. Ergonomic design: Tiltable handles, adjustable arms, and upright working positions to reduce neck and back strain. Optional imaging: Many models include cameras for live video, photo capture, and patient documentation. For each product identified in the response (brand name and part number), the response must include descriptive literature demonstrating that the product meets or exceeds the MTRs specified above. The Government's intent is to include all ancillary items necessary to ensure the equipment can function as designed by the OEM and as required. Respondents are encouraged to identify any additional accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated system. These items must be clearly identified by brand name and part number. Responses to this Sources Sought Notice shall include the following: Full name and address of company. SAM Unique Entity Identifier (UEI). Business Size and socioeconomic status, if applicable (e.g., SDVOSB, VOSB, WOSB, HUBZone, 8(a)). Manufacturer or Distributor: If distributor, provide the full name, business size and address of the manufacturer. If distributor, provide evidence that your firm is currently an authorized distributor for the manufacturer of the products proposed, e.g. an authorized distributor letter with current date certified by the OEM. Country of Origin designation for all products proposed. Describe the firm s ability to provide uninterrupted supply of products on a national scale. Technical literature clearly demonstrating that the proposed product(s) meets the identified minimum technical requirements identifying the page number(s) where each requirement is met. Does respondent offer an annual service plan, Yes or No? If Yes: Describe what the plan covers? Identify whether the plan covers software updates, parts repair/replacement, or both Provide literature or other documentation describing the service plan. Identify whether service is provided by the OEM or a subcontractor. Identify any additional product, accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated system. Include the applicable brand name and part number. Item pricing information of products, inclusive of flat rate shipping. Include any quantity discounts, noting at what order quantity the Government should expect tiered price reductions, if any. NOTE: In order for the Contracting Officer to determine whether a set-aside can be pursued, it is essential to provide pricing information. Without this information, the Contracting Officer will be unable to assess whether there is a reasonable expectation of receiving fair and reasonable pricing from socio-economic concerns. Does your firm anticipate any subcontracting opportunities for this requirement? If yes, identify the type and approximate scope of work that could be subcontracted. Identify any federal contract vehicles held by your firm through which your firm can provide this equipment. Are there any further standards or criteria VA should consider in a procurement action for this equipment? Are the Government s specifications unduly restrictive? If yes, identify the specific requirement(s) considered unduly restrictive and provide supporting rationale and recommended alternative language. Any additional information the Government should know prior to issuing a solicitation. Describe any minimum order quantities, geographic limitations, delivery constraints, lead times, or other limitations that could affect the firm's ability to support the requirement on a nationwide basis. | 73% | Market Research | 10/16/2026 |
6515--541-26-3-250-0303 - Olympus BX43 Pathology Microscope Brand Name Only Small Business Set-Aside Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice DESCRIPTION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. This solicitation is a Small Business set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112. The FSC/PSC is 6515. The NCO 10 for Cleveland VA Medical Center is seeking to purchase the Olympus BX Microscope for the Cytology Department. This solicitation closes on September 25, 2026 @ 13:00 AM. Quotes should be submitted to Kevin Peeples kevin.peeples@va.gov Please reference 36C25026Q1066 1. Contracting Officer s Representative (COR NA 2. CONTRACT TITLE: BX43-1-3 Cytology Microscopes 3. BACKGROUND The Department of Veterans Affairs Northeast Ohio Healthcare System (VANEOHS) has an immediate requirement for the procurement of two (2) brand name Evident (formerly Olympus) BX43-1-3 cytology microscopes, inclusive of the True Color LED light source compatible with BX43F, BX46F, and BX63F platforms, and all required Original Equipment Manufacturer (OEM) components and accessories necessary for full clinical activation and use. The requested microscopes are additional units to the currently deployed Evident BX-series microscopes within the Cytology Section of Pathology & Laboratory Management Services (PALMS). The laboratory s diagnostic workflows, digital imaging systems, standardized operating procedures, educational protocols, and preventative maintenance programs are fully based upon the Evident BX-series platform. The Cytology laboratory s diagnostic workflows, digital imaging systems, standardized operating procedures, educational platforms, and preventative maintenance programs are built upon the BX-series architecture. The Cytology Section performs high-resolution visualization and evaluation of: Cellular morphology Cytological abnormalities Microbiological organisms Inflammatory processes Neoplastic pathologies These diagnostic evaluations are mission-critical to accurate, timely, and actionable patient diagnoses. This acquisition is required to maintain full operational capacity, mitigate diagnostic backlog, maximize utilization of existing Government-owned assets, and ensure uninterrupted cytopathology services. 4. SCOPE The Contractor shall provide two (2) new, current production BX43-1-3 microscopes, inclusive of the True Color LED light source and all requested and associated OEM components, accessories, modules, assemblies, and consumables required for immediate clinical deployment within the Cytology Section. The Contractor shall provide on-site installation, configuration, and operational verification of all microscopes and associated OEM components at the Louis Stokes Cleveland VA Medical Center, Pathology & Laboratory Management Services Cytology Section. Installation shall include full assembly, alignment of optical components, calibration of the illumination system, verification of mechanical stage functionality, confirmation of imaging integration (if applicable), and validation of overall system performance for clinical diagnostic use. All equipment shall be fully operational and ready for immediate patient care application upon completion of installation. Any deficiencies identified during installation or inspection shall be corrected by the Contractor at no additional cost to the Government prior to final acceptance. The microscopes and components shall meet or exceed the following operational, optical, interoperability, and performance requirements: Optical and Imaging Performance: UIS2 infinity-corrected optical system Plan Apochromat or Plan Fluorite objectives optimized for cytology applications High numerical aperture objectives suitable for oil immersion cytopathology 100x oil immersion capability Wide field number (FN 22 or greater) High-resolution visualization suitable for evaluation of cellular morphology, cytologic abnormalities, infectious organisms, and neoplastic processes OEM camera adapter compatibility for integration with existing digital imaging systems Illumination System: True Color LED light source compatible with BX43F, BX46F, and BX63F Daylight-balanced illumination to support accurate cytologic color interpretation Flicker-free, stable output LED lifespan 20,000 hours Intensity memory function Uniform illumination across full field of view Ergonomic and Mechanical Features: Ergonomic observation tube with adjustable inclination Low-position coaxial focus knobs Coarse and fine focus with tension adjustment Precision mechanical stage with fine movement control Stage inserts compatible with cytology slide preparation Configuration optimized for prolonged microscopic review Required OEM Accessories and Components: The Contractor shall provide all OEM components necessary to ensure full functionality and activation, including but not limited to: Proprietary stage inserts Light modules Camera adapters Immersion oil kits (OEM approved) Dust covers Power cords Calibration and setup materials Required mounting hardware Any additional OEM components necessary for clinical operation All components must be new, OEM-manufactured, and fully compatible with existing Evident BX-series microscopes currently deployed within the laboratory. Interoperability Requirements: The Cytology Section is standardized on the Evident BX-series microscope platform. All diagnostic workflows, imaging protocols, training materials, and maintenance programs are built upon this system. The requested microscopes are additional to the currently deployed fleet and must: Integrate seamlessly with existing BX-series equipment Maintain optical consistency across the microscope fleet Preserve manufacturer warranty protections Support existing service contracts and maintenance protocols Require no retraining due to platform change Non-OEM or alternate-brand equipment would: Disrupt standardized diagnostic workflow Introduce optical variability affecting diagnostic consistency Invalidate manufacturer warranties Require retraining of cytotechnologists and pathologists Undermine fleet uniformity and serviceability Warranty: Equipment shall include the manufacturer s standard warranty covering optical, mechanical, and illumination systems for a minimum of one (1) year. 6. Performance Monitoring The Government will monitor contractor performance to ensure compliance with all requirements outlined in this Statement of Work. Performance monitoring will include verification of timely delivery, proper installation, system functionality, completion of required training, and successful commissioning of the equipment in accordance with manufacturer specifications. Government representatives, including Pathology & Laboratory Medicine Service personnel and designated technical staff, will validate that the system operates as intended and meets operational and functional requirements prior to acceptance. Any deficiencies identified during delivery, installation, or operational verification shall be corrected by the Contractor at no additional cost to the Government. The Contractor shall coordinate all activities with the designated Government point of contact to ensure minimal disruption to laboratory operations and adherence to agreed installation schedules. 7. Security Requirements The C&A requirements do not apply, and the Security Accreditation package is not required for this SOW. 8. Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). There will be no government-Furnished equipment of information. 9. Other Pertinent Information or Special Considerations. The requested equipment shall be interoperable/usable with current workflows and technology deployed and used within the clinical atmosphere and existing BX Microscopes and associated accessories. a. Identification of Possible Follow-on Work. NA b. Identification of Potential Conflicts of Interest (COI). NA c. Identification of Non-Disclosure Requirements. NA d. Packaging, Packing and Shipping Instructions. NA e. Inspection and Acceptance Criteria. Government acceptance will occur upon: Successful installation Demonstrated operational functionality Completion of training if applicable Readiness for clinical laboratory use 10. Place of Performance. Delivery Location: Louis Stokes Cleveland VA Medical Center Pathology & Laboratory Management Services Cytology 10701 East Boulevard Cleveland, OH 44106 11. Period of Performance NA 12. Delivery Schedule. The Contractor shall deliver all required equipment and system components within ninety (90) calendar days from the date of contract award. Installation, configuration, and commissioning activities shall be coordinated with Government personnel and completed within the same 90-day period unless otherwise agreed upon in writing by the Contracting Officer. SUBMISSION Responses to this solicitation shall be submitted via email to kevin.peeples@va.gov. Telephone responses shall not be accepted. Responses must be received no later than September 25 2026, at 13:00 pm EST, (Eastern Standard Time). CLAUSES FAR Number Title Date 52.209-6 PROTECTING THE GOVERNMENT S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT JAN 2025 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS NOV 2023 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS APR 2026 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER SYSTEM FOR AWARD MANAGEMENT OCT 2018 52.252-2 CLAUSES INCORPORATED BY REFERENCE FEB 1998 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS MAR 2023 52.233-1 DISPUTES MAY 2014 52.233-3 PROTEST AFTER AWARD AUG 1996 852.219-76 852.203-70 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING-CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (DEVIATION) COMMERCIAL ADVERTISING JAN 2023 MAY 2018 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS NOV 2018 852.237-70 CONTRACTOR RESPONSIBILITIES OCT 2019 PROVISIONS 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS SEP 2023 52.212-2 EVALUATION--COMMERCIAL ITEMS NOV 2021 | 61% | Combined Synopsis | 09/25/2026 |
59% | Awarded | Open | |
Page 2 of 4 THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) is seeking sources capable of providing Avanti Polar Ganglioside GM1-SHP 25MG for the Phoenix Veterans Affairs Health Care System. The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (12) What is estimated life span of your solution? What support/services does that entail? (13) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained. (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. Buy America Compliance Respondents shall provide sufficient detail to determine compliance with the Buy American Act, including country of origin, domestic content, and availability of domestic alternatives. Responses should be complete and supported with verifiable information. Please identify the country of origin for the end product(s) being offered. Include the location of final assembly/manufacture. Please provide the percentage of domestic content (by cost) for each product(s). Describe the origin of the major components. Does your product qualify as a domestic end product in accordance with the Buy American Act? If the proposed product is not compliant, are you able to provide a BAA-compliant domestic alternative? Please identify the manufacturer name and location for the product(s). Confirm whether the manufacturer is U.S.-based. Identify the country of origin of each product and indicate whether the product qualifies as a U.S.-made or designated-country end product in accordance with the Trade Agreements Act Responses to this notice shall be submitted via email to wilbert.parks@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, October 9, 2024 by 4:00 PM EST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement. | 59% | Market Research | 10/21/2026 |
Additional Details
Solicitation Number
36C26223Q1484
Archive Date
Nov 12, 2023
Office Address
Gilbert, AZ, 85297