GovChime
Notice ID: 371a69810dc64581bf73ef5897c3a597Combined Synopsis/Solicitation

6515--Laboratory Balance

Archived on September 11, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−07:00
Posted
August 7, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
339112: Surgical and Medical Instrument Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
262-NETWORK CONTRACT OFFICE 22 (36C262)
Place of performance
Department of Veterans Affairs VA New Mexico Healthcare System 1501 San Pedro DR., Albuquerque, 87108
Last updated
Dec 6, 2025

Identifiers

Solicitation number
36C26224Q1712
Notice ID
371a69810dc64581bf73ef5897c3a597

Description

Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 21 of 21 Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 21 (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26224Q1712 is issued as a Request for Quotation (RFQ). (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular. (iv) This solicitation is UNRESTRICTED using NAICS Code 339112 having a size standard of 1000 employees. (v) Product Information: **Manufacturer is Mettler-Toledo, LLC** Description Product ID QTY Balance XPR56 30355535 1 Balance XPR205 30355411 1 Balance XPR5003S 30316990 1 Balance XPR32000L 30316485 1 Software LabX Balance Server 11153121 1 License LabX Balance 1 instrument 11153220 3 Desktop/Monitor Data Collection System 63057273 1 EQPac Comprehensive Qualification - XPR56 1 ExtendedCare Warranty - XPR56 1 EQPac Comprehensive Qualification - XPR205 1 ExtendedCare Warranty - XPR205 1 EQPac Comprehensive Qualification - XPR5003S 1 ExtendedCare Warranty - XPR5003S 1 EQPac Comprehensive Qualification - XPR32000L 1 ExtendedCare Warranty - XPR32000L 1 Consult Solution HR LabX Installation 1 Zone travel charge 1 Service Plan - 1 Visit(s) - Software care LabX Balance Server 1 Service Plan - 1 Visit(s) - Software care LabX Balance 3 Order Handling fee 1 Salient Characteristics: The below equipment is used by chemists performing chemical analysis on pharmaceutical products manufactured in a DEA/FDA registered pharmaceutical manufacturing facility and must be the grade of equipment suitable for this function (meet 21 CFR Part 211 requirements). Balance 1 Maximum Capacity 52 g Readability 0.001 mg Repeatability, typical 0.0007 mg Minimum Weight (USP, 0.1%, typical) 1.4 mg 21 CFR Part 11 Compliant Weighing Ethernet port Balance 2 Maximum Capacity 220 g Readability 0.01 mg Repeatability, typical 0.007 mg Minimum Weight (USP, 0.1%, typical) 14 mg Repeatability 0.015 mg Repeatability (Test Weight) 10 g Guaranteed Repeatability 0.015 mg 21 CFR Part 11 Compliant Weighing Ethernet port Balance 3 Maximum Capacity 5.1 kg Readability 1 mg Repeatability, typical 0.9 mg Minimum Weight (U=1%, k=2), typical 180 mg Repeatability 1.4 mg Repeatability (Test Weight) 2 kg 21 CFR Part 11 Compliant Weighing Ethernet port Balance 4 Maximum Capacity 32.1 kg Readability 1 g Repeatability, typical 400 mg Repeatability 600 mg Repeatability (Test Weight) 10 kg 21 CFR Part 11 Compliant Weighing Ethernet port All balances must be able to be connected via ethernet ports to a server. When used the balances will send the weighing data to the software installed on the server to record results meeting 21 CFR Part 11 requirements. Software to record results must be 21 CFR Part 11 compliant software and Good Weighing Practice (GWP) compliant Desktop computer/monitor with ethernet port capable of supporting the software All balances require industry standard qualifications (installation/functional qualification) services after delivery Offeror quotations must demonstrate meeting the salient physical, functional, or performance characteristic specified in this solicitation, otherwise, it will be considered non-responsive. The technical specifications for this requirement are listed for Brand Name or Equal per FAR 52.211-6. The information identified provided is intended to be descriptive, not restrictive and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can provide the brand name or equal to supplies being requested. (vii) Delivery Requirements: Place of Delivery VA New Mexico Healthcare System | 1501 San Pedro DR. | Albuquerque NM, 87108 Period of Performance/Delivery Timeframe: Deliver items no later than 60 days from the award date. (viii) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. FAR 52.212-1 Addendum: All offeror quotes for this solicitation must be received electronically through email no later than Monday, August 12, 2024, at, 1:00 PM PST. Ensure to reference solicitation number 36C26224Q1712 within the subject line of the email. Any offeror quotes received after the prescribed date/time shall be considered late and will not be considered for award Offers shall be sent by email to Carlo Manuel at Carlo.manuel@va.gov . (ix) The provision at FAR 52.212-2, Evaluation -- Commercial Items (Oct 2014), applies to this solicitation. FAR 52.212-2 Addendum / Replacement: (a) The Government will award a contract resulting from this solicitation to the responsive and responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest priced quotation that meets all salient characteristics that is both responsive and responsible. Acceptability of equipment/services shall be established by review of each submitted quotation by the designated evaluator(s) and verification that any equal-to items meet the salient characteristics included in this solicitation. Submissions to this solicitation must show clear, compelling and convincing evidence that equal-to items meet all the salient characteristics. Offers that include any items that are not determined as Brand Name or Equal shall result in an unacceptable offer. See 52.211-6 Brand Name or Equal for additional information. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) AUTHORIZED DISTRIBUTOR LETTER (ADL) Any suppliers, distributors and/or resellers who participate in this solicitation, must be authorized to provide the supplies by the Original Equipment Manufacturer (OEM). An Authorized Distributor Letter (ADL) from the manufacturer shall be included with your response to be considered for award. If the potential Authorized Supplier is not the OEM, the Authorized Supplier must provide an Authorized Distributor Letter from the OEM signed within the last 90 days. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all of the manufacturer s products. This letter must be on the manufacturer s letterhead and contain the signature of an authorized official for the manufacturer. (x) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Items, with this solicitation or ensure SAM.gov is updated with current information. (xi) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition. 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (OCT 2018) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment. (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 41 U.S.C. 4712 and 10 U.S.C. 2409 relating to whistleblower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments (9) The specification. (t) [Reserved] (u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an I agree click box or other comparable mechanism (e.g., click-wrap or browse-wrap agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. (v) Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of Clause) (xii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, applies to this acquisition. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL ITEMS (JUN 2020) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204 23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115 91). (3) 52.204 25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115 232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [] (1) 52.203 6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (OCT 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). [] (2) 52.203 13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509). [] (3) 52.203 15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) [] (4) 52.204 10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109 282) (31 U.S.C. 6101 note). [] (5) [Reserved] [] (6) 52.204 14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (7) 52.204 15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111 117, section 743 of Div. C). [] (8) 52.209 6, Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note). [] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313). [] (10) [Reserved] [] (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-3. [X] (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). [] (ii) Alternate I (MAR 2020) of 52.219-4. [] (13) [Reserved] [] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020). [] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644). [] (ii) Alternate I (MAR 2020) of 52.219-7. [] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)). [] (17)(i) 52.219 9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)). [] (ii) Alternate I (NOV 2016) of 52.219-9. [] (iii) Alternate II (NOV 2016) of 52.219-9. [] (iv) Alternate III (JUN 2020) of 52.219 9. [] (v) Alternate IV (JUN 2020) of 52.219 9. [] (18) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)). [] (19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)). [] (20) 52.219-16, Liquidated Damages Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). [] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f). [] (22)(i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C 632(a)(2)). [] (ii) Alternate I (MAR 2020) of 52.219-28. [] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)). [] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (MAR 2020) (15 U.S.C. 637(m)). [] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)). [] (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)) [] (27) 52.222-3, Convict Labor (June 2003) (E.O. 11755). [] (28) 52.222 19, Child Labor Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126). [] (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015). [] (30)(i) 52.222 26, Equal Opportunity (SEP 2016) (E.O. 11246). [] (ii) Alternate I (FEB 1999) of 52.222-26. [] (31)(i) 52.222 35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212). [] (ii) Alternate I (JULY 2014) of 52.222-35. [] (32)(i) 52.222 36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793). [] (ii) Alternate I (JULY 2014) of 52.222-36. [] (33) 52.222 37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212). [] (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). [X] (35)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627). [] (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). [] (36) 52.222-54, Employment Eligibility Verification (OCT 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) [] (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) [] (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) [] (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693). [] (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693). [] (40)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514). [] (ii) Alternate I (OCT 2015) of 52.223-13. [] (41)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514). [] (ii) Alternate I (JUN 2014) of 52.223-14. [] (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007)(42 U.S.C. 8259b). [] (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). [] (ii) Alternate I (JUN 2014) of 52.223-16. [X] (44) 52.223 18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513). [] (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693). [] (46) 52.223-21, Foams (JUN 2016) (E.O. 13693). [] (47) (i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a). [] (ii) Alternate I (JAN 2017) of 52.224-3. [] (48) 52.225-1, Buy American Supplies (MAY 2014) (41 U.S.C. chapter 83). [] (49)(i) 52.225-3, Buy American Free Trade Agreements Israeli Trade Act (MAY 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. [] (ii) Alternate I (MAY 2014) of 52.225-3. [] (iii) Alternate II (MAY 2014) of 52.225-3. [] (iv) Alternate III (MAY 2014) of 52.225-3. [] (50) 52.225 5, Trade Agreements (OCT 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). [X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). [] (52) 52.225 26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). [] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). [] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergenc...

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:36C26224Q1712
  1. Combined Synopsis
  1. Combined SynopsisCurrentAug 7, 2024

    6515--Laboratory Balance

    Notice 371a69810dc64581bf73ef5897c3a597 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-AwardedOpen
Page 2 of 4 THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) is seeking sources capable of providing Avanti Polar Ganglioside GM1-SHP 25MG for the Phoenix Veterans Affairs Health Care System. The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (12) What is estimated life span of your solution? What support/services does that entail? (13) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained. (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. Buy America Compliance Respondents shall provide sufficient detail to determine compliance with the Buy American Act, including country of origin, domestic content, and availability of domestic alternatives. Responses should be complete and supported with verifiable information. Please identify the country of origin for the end product(s) being offered. Include the location of final assembly/manufacture. Please provide the percentage of domestic content (by cost) for each product(s). Describe the origin of the major components. Does your product qualify as a domestic end product in accordance with the Buy American Act? If the proposed product is not compliant, are you able to provide a BAA-compliant domestic alternative? Please identify the manufacturer name and location for the product(s). Confirm whether the manufacturer is U.S.-based. Identify the country of origin of each product and indicate whether the product qualifies as a U.S.-made or designated-country end product in accordance with the Trade Agreements Act Responses to this notice shall be submitted via email to wilbert.parks@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, October 9, 2024 by 4:00 PM EST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research10/21/2026
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a RFI only. The purpose of this RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) is seeking sources capable of providing Zimmer BioMet Trays. This is a BRAND NAME ONLY action. LIN Description Qty 1 135 STR/ 3MM STEM PROV SZ 10-18 1 2 175 STR/3MM OFF STEM PROV 10-18 1 3 135/175 6MM OFF STEM PROV 10-18 1 4 TIB PREP / TRIAL LEFT TRAY ( MOD TIB ) 1 5 CONE/SLEEVE PREP TRAY 1 6 IMPLANTATION TRAY 1 7 TIB FEM PREP TRAY 1 8 CORE ART SURFACE LEFT TRAY 1 9 FEM AUG CORE UNIVERSAL 1 10 CORE FEM PREP LEFT TRAY 1 11 CORE FEM TRIALS LEFT 1 12 GENERAL INSTRUMENT TRAY 1 13 REAMER TRAY 1 14 CORE ART SURFACE RIGHT TRAY 1 15 CORE FEM PREP RIGHT TRAY 1 16 CORE FEM TRIALS RIGHT 1 17 TIB PREP/TRIAL RIGHT TRAY ( MOD TIB ) 1 18 UNIVERSAL PRIMARY CONVERSION 1 *See Attachment 1 for Bill of Materials for each tray/kit. If your company is interested and capable of providing the required supplies and services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (2) Is your company considered small under the NAICS code identified in this RFI? (3) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services? (4) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (6) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (7) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (8) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (9) Please indicate whether your product conforms to the requirements of the Buy American Act? (10) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (11) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (12) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (13) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (14) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to jasmine.pressley-barnard@va.gov. Telephone responses will not be accepted. Responses must be received no later than Monday, October 19, 2026 by 02:30 PM PT Local. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research10/19/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format Revolutionary FAR Overhaul (RFO) in Federal Acquisition Regulation (FAR) subpart 12.202, “Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06, effective 8/26/2025. This solicitation is set-aside for 100% total Service-Disabled Veteran-Owned Small Businesses (SDVOSBs). The associated North American Industrial Classification System (NAICS) code for this procurement is 339112, with a small business size standard of 1,000 Employees. The FSC/PSC is W065. The award will be made to the quote most advantageous to the Government and best meets the requirement described in the Statement of Work (SOW). The New Mexico Veterans Affairs Healthcare System (NMVAHCS) is seeking to purchase Laser Equipment Rental Services. ***Please reference the Solicitation and Attachments for additional details***
-Combined Synopsis11/20/2026
Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 3 of 3 Page 1 of Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 3 Page 1 of 1 1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Omnicell Pharmacy 1.B. Project Location: VA Long Beach Healthcare System 5901 East 7th Street, Long Beach, CA 90822 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26227Q0078. 1.D. Set Aside: This solicitation is Unrestricted Open Market 1.E. Applicable NAICS code: 339113, Surgical Appliances and Supplies Manufacturing 1.F. Small Business Size Standard: 1000 Employees 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 365 days from award of date 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to victor.oliveros@va.gov no later than 12:00 Pacific Local Time, November 11, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, November 17, 2026, to victor.oliveros@va.gov . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items
-Combined Synopsis11/17/2026

Additional Details

Solicitation Number

36C26224Q1712

Archive Date

Sep 11, 2024

Office Address

Gilbert, AZ, 85297