GovChime
Notice ID: a8268821588a46bfbce0a4da18928e26Combined Synopsis/SolicitationArchived

6515--Dermatology Exam Tables

Archived on April 19, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM PDT
Posted
March 12, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Service-Disabled Veteran-Owned Small Business Set Aside
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
262-NETWORK CONTRACT OFFICE 22 (36C262)
Place of performance
VAMC Long Beach Supply Warehouse Bldng 149, Long Beach, CA, 90822
Last updated
Nov 2, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
36C26226Q0488
Notice ID
a8268821588a46bfbce0a4da18928e26

Description

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 -- Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26226Q0488 is issued as a Request for Quote (RFQ) in conjunction with FAR -- Part 13 Simplified Acquisition Procedures and supplemented with additional information included in this notice. The Government intends to award a single, Firm-Fixed Price (FFP) award contract. (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular 2025-03, January 1, 2025. (iv) This solicitation will be a total Service-Disabled Veteran Owned Small Business Set-Aside, to a business associated with The North American Industry Classification System (NAICS) Code, 339113, and the Small Business Administration s (SBA) size standard of 800 employees. (v) The Department of Veterans Affairs (VA) seeks to make a procurement for dermatology exam tables for the VA Long Beach Healthcare System. This solicitation is being procured as a brand name or equal IAW 52.211-6 -- Brand Name or Equal. The submissions must meet the following salient characteristics: Must: 1. Must be a barrier-free, Americans with Disability Act-accessible examination chair 2. Must have a minimum seat height of 18 inches or less to support safe wheelchair transfers Must provide electric power adjustment for: Height, Backrest, Tilt including pelvic tilt positioning 3. Must support a minimum patient weight capacity of 450 lbs 4. Must include a wired hand control for precise positioning 5. Must include a stable, non-tip base design for clinical safety 6. Must include medical-grade, seamless upholstery Must be fluid-resistant Must be constructed with seamless, non-porous materials that allow cleaning and disinfection in accordance with VHA Directive 1131(2), Infection Prevention and Control Program, and compatible with VA-approved disinfectants used in clinical environments. 7. Must include a cleaning mobility system such as but not limited to: a Clean Assist Roller System or equal 8. Must include integrated electrical receptacles/outlets for powered dermatology instruments 9. Must include a minimum of one (1) integrated storage drawer with heater for warming supplies 10. Must operate using standard 120V hospital-grade power 11. Must be clinically rated for daily use in a VA dermatology clinic 12. Must support patient positioning for full-body dermatologic examinations and procedures 13. Must allow unobstructed clinical access to head, neck, torso, and extremities 14. Must be compatible with minor dermatologic procedures (such as but not limited to: biopsies, excisions, lesion removals) The information identified above is intended to be descriptive, not restrictive and to indicate the quality and services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the services that fulfill the required specifications. If a solicitation is published, a site walk thru may be available in order to address key details. See attached SF 1449 Solicitation for Statement of work (SOW), applicable clauses / provisions, and other pertinent information relative to this solicitation. Place of Performance: VA Long Beach Healthcare System Supply Warehouse, 5901 E. 7th Street, Long Beach, CA 90822. Period of Performance: Within 90 days of placing order. Provisions 52.212-1, Instructions to Offerors Commercial and 52.212-2, Evaluation Commercial Items are applicable to this acquisition. Furthermore, Provision 52.212-2 is utilizing the Lowest Price Technically Acceptable (LPTA) on an Acceptable/Unacceptable evaluation process. Submitting Quote: Offeror(s) shall submit their quote on company letterhead and shall include the completed pricing forms, along with name, address, telephone number of the offeror, firm s DUNS#, total price and a completed copy of FAR Clause 52.212-3 Offerors Representations and Certifications - Commercial Items or a copy of offeror s annual offeror representations and certifications (ORCA) document from www.sam.gov as required by FAR Clause 52.212-3 Offerors Representations and Certifications - Commercial Items. As an alternative, Offeror(s) may use the Price/Cost Schedule of the attached SF 1449 for quote submission. Submit all question(s) to Nate Munson at Nathan.Munson@va.gov no later than March 18, 2026, 4:00 PM Pacific Standard Time (PST). Ensure to reference solicitation # 36C262262Q0488 within subject line of the email. Quotes must be received by March 20, 2026 by 4:00 PM PST. Email your quote to Nate Munson at Nathan.Munson@va.gov. Ensure to reference solicitation # 36C262262Q0488 within subject line of the email. Quote(s)/offer(s) received after the prescribed deadline, shall be considered non-responsive and will not be considered for award. CLAUSES FAR Number Title Date 52.209-6 PROTECTING THE GOVERNMENT S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT AUG 2013 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS FEB 2012 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS ALTERNATE II (JUL 2012) AUG 2012 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER SYSTEM FOR AWARD MANAGEMENT JUL 2013 52.252-2 CLAUSES INCORPORATED BY REFERENCE FEB 1998 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC 2013 52.233-1 DISPUTES MAY 2014 52.233-3 PROTEST AFTER AWARD AUG 1996 852.203-70 COMMERCIAL ADVERTISING JAN 2008 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS NOV 2012 852.237-70 CONTRACTOR RESPONSIBILITIES APR 1984 852.215-70 SERVICE-DISABLED VETERAN-OWNED AND VETERAN-OWNED SMALL BUSINESS EVALUATION FACTORS JUL 2016 PROVISIONS 52.211-6 52.212-1 BRANDNAME OR EQUAL INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS AUG 1999 APR 2014 52.212-2 EVALUATION--COMMERCIAL ITEMS OCT 2014 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS NOV 2014

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Jun 30, 2026

NAICS

339113

Agency

Department of Veterans Affairs

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Contracting Officer

Primary Contact

Nate Munson
Contract Specialist

Documents

Files (2)

  • S02 - RFQ 36C26226Q0488 - Dermatology Exam Tables - SDVOSB Set Aside.docx

    127 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • 36C26226Q0488_1.docx

    19 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    6515--Dermatology Exam Tables

    Notice a8268821588a46bfbce0a4da18928e26 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
STATEMENT OF NEED (SON) 1. Introduction The VA Pittsburgh Healthcare Systems (VA PHCS) located at University Drive, Pittsburgh PA has a brand name or equal (BNOE) requirement for six (6) exam tables throughout the 2 East location. 2. Background and Specifications The vendor shall deliver (6) exam tables fully assembled with the criteria listed below. All equipment shall be delivered together. Refurbished or used equipment is not acceptable. In order to meet spacing restraints, provider preference, and infection control guidelines, the brand name for reference is the Oakworks EA General 2 Section Ultrasound Table. Salient characteristics for replacement tables are: Capacity of at least 550 lbs Must be electrical powered Must have foot and hand controls Size requirements: no larger than 32 w x 74 L no less than 27 w x 70 L Must have locking casters Must have electric leg and backrest Sapphire Blue fabric covering must be able to be cleaned with either PDI Super Sani Wipes or Clorox Disinfecting Wipes 3. Scope The contractor will coordinate all deliveries with the technical POC provided below. All deliveries will be made to the University Drive address of the VA HCS address. The contractor will provide: Removal and disposal of all packaging materials and shipping debris Delivery of new tables to each provider room as designated by the POC Operation and maintenance manuals for the new exam tables 4. Period of Performance. 30 Days after receipt of order 5. Delivery Location VA Pittsburgh Healthcare System University Drive C Pittsburgh, PA 15240 2 East REQUEST FOR INFORMATION INSTRUCTIONS: The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications mentioned above. Responses to this RFI should include company name, address, point of contact, phone number, and point of contact e-mail, UEI Number, Cage Code, size of business pursuant to North American Industrial Classification System (NAICS) 339112 (size standard of 1000 employees). Please answer the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? Is your company considered small under the NAICS code identified under this RFI? Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? If not, can you provide additional information shown below. This is to confirm compliance with the non-manufacturer rule IAW 13 CFR 121.406(b) Nonmanufacturers. Does your company exceed 500 employees; Primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; Obtained an individual or class waiver? If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? Must have an authorized distributor letter from the original equipment manufacture. If you intend to subcontract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to subcontracted work and completion of job. Does your company have an FSS contract with GSA or the NAC or are you a contract holder with any other federal contract? If so, please provide the contract number. If you are an FSS GSA/NAC contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. Please submit your capabilities in regard to the salient characteristics detailed above and any information pertaining to equal to items to establish capabilities for planning purposes? Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. Equipment manufacture, Country of origin Please provide your UEI number. This RFI will be conducted in accordance with Federal Acquisition Regulation (FAR) Part 12. Telephone responses will not be accepted. Responses must be received via e-mail to andrew.taylor3@va.gov no later than, 4:00 PM Eastern Time (ET) on November 12, 2026. This notice will help the VA in determining available potential sources only. Do not contact VA Medical Center staff regarding this requirement, as they are not authorized to discuss this matter related to this procurement action. All questions will be addressed by the Contracting Officer, Andrew Taylor. Questions or responses will include the Source Sought number 36C24427Q0034 in the subject line. All firms responding to this Request for Information are advised that their response is not a request for proposal, therefore will not be considered for a contract award. Any interested business concern must submit a no longer that 10-page capability statement addressing its ability to meet the requirements listed above to Capability Statement shall include a statement regarding how the business concern is engaged in wholesale trade and normally sells the item being supplied and how the business concern will take ownership of the items being delivered. Vendors shall also provide certification, evidence that they are an authorized distributor of the Original Equipment Manufacturer. If a solicitation is issued, information will be posted on the SAM web site for all qualified interested parties at a later date and interested parties must respond to the solicitation to be considered for award. This notice does not commit the government to contract for any supplies or services. The government will not pay for any information or administrative cost incurred in response to this Request for Information. Information will only be accepted in writing by e-mail to Contracting Officer at andrew.taylor3@va.gov include 36C24427Q0034 in the subject line. DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. End of Document
91%
Market Research11/12/2026
Amendment 001 to Solicitation #36C25927Q0025 (Air-powered chiropractic tables) This amendment s purpose is to list and answer the questions submitted by the questions deadline as specified in the solicitation. Questions and Answers: CLIN 0018 is listed as "Delivery," but the solicitation states freight shall be added to another line item and not be its own line item. How should offerors handle delivery/freight pricing? Freight costs may be added to the delivery line item if the offeror deems appropriate. Is any on-site installation or assembly required at the SLC or Ogden facilities, or is this delivery of the equipment only? The expectation is that the tables are pre-assembled and will be easy to place in the clinics. However, if the tables are NOT pre-assembled, the offeror should include installation/assembly fees into the delivery line item and ensure it is noted. For an "or equal" product, will an Authorized Distributor Letter from the manufacturer of the equal product we quote satisfy VAAR 852.212-71(c), or must the letter be from Hill Laboratories specifically? The Authorized Distributor Letter must be from the manufacturer of the brand the offeror is proposing. Offerors would only need to provide a letter from Hill Laboratories IF they are offering the Government the Hill Laboratories product. Installation scope: The section is titled "Delivery and Installation," but no installation tasks are listed. Should the price include inside delivery to the treatment room, uncrating, assembly, set-up/leveling, functional testing, packaging and debris removal, and staff in-service training? If so, please name the rooms and floors at each site. The expectation is for the tables to be delivered pre-assembled to the facility. The VA staff would then take possession of the items and move them to the clinic space. The Offeror should include installation/assembly costs IF the tables are not delivered pre-assembled. Delivery windows and access: Please give the allowed delivery days and hours, receiving dock or entrance, elevator access, any check-in or escort steps, and a point of contact at each site (George E. Wahlen VAMC, 500 Foothill Dr., Salt Lake City; Ogden CBOC, 2945 South Washington Blvd., Suite 1, South Ogden). Are deliveries to the 2 sites allowed on different dates? Deliveries may occur on different dates if needed. Deliveries shall be made between 0700 and 1700 Mondays through Fridays (except on Federal holidays). Required delivery date: Is there a required or target delivery date, or a maximum lead time in calendar days after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. Freight vs. line 0018: The RFQ says freight shall be added to another line item and not be its own line item, but line 0018 is "Delivery." Should delivery/installation be priced on line 0018, or included in line 0001 with 0018 shown as "Included with line item 0001"? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Removal of existing tables: Is the contractor expected to remove and dispose of any existing tables at either site? If yes, how many, which models, and is there a VA disposal process? No removal or disposal services are required for this requirement. "Or equal" salient characteristics: The RFQ says "air powered - NOT pneumatic or hydraulic." Air-powered systems run on compressed air, which is usually described as pneumatic. Please clarify what this requirement excludes so that "equal" products can be judged fairly. Salient characteristics updated to: Must be air powered/pneumatic NOT hydraulic Option lines: For an "equal" product, may an option that is standard on that product be shown as "Included with line item 0001"? Must each brand-name part number (for example, AF-F15, 92CS, 97) be matched one for one? Each line item does not need to be matched one for one. However, the Offeror should ensure the components listed in the line items are included in the table. Please ensure a note is provided if the brochures/specification documents do not clearly show those items are included with the table. Height and width: Does a maximum height of exactly 29" meet the requirement, and is the 27" width (line 0017) the required width? The tables must be able to reach at least 29 but if the table is able to exceed this height (up to ~ 32 ) that would be preferred. The width dimension of the table must be between 27 and 33 Authorized distributor letter: Is the OEM letter (VAAR 852.212-71(c)) required for all offerors who are not the OEM, including authorized dealers? Must it name this solicitation, or is a general authorization letter on OEM letterhead acceptable? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Contractor access/PIV: Clauses 852.204-70/72 are included, but all risk levels are marked N/a. Please confirm that delivery and installation staff will not need a background check or PIV card, and that a visitor badge and escort is enough? The expectation is for the tables to be pre-assembled and the Offeror would only need to deliver the item to the warehouse dock/facility. No access to the facility is anticipated although the VA staff may accompany the Offeror if delivery/installation/assembly is needed. Warranty/service: Should on-site labor warranty or service be included, or only the minimum 1 year parts warranty? Minimum 1-year parts warranty; additional on-site and/or service warranty appreciated but not mandatory Page limits: The RFQ mentions page limitations but does not state any. Is there a page limit for any volume? No page limits are present for this solicitation. However, Offerors should be mindful of potential email size limitations. Option to Extend Services (52.217-8) and Service Contract Labor Standards (52.222-41/43) are included. Please confirm whether they apply to this one-time supply purchase with installation. FAR 52.217-8 was included in case an extension to the period of performance is needed. SCLS does not apply to this requirement. Deadline time zone. The RFQ states quotes are due 12:00 PM MST on 30 October 2026, while SAM.gov lists the response deadline at UTC-06:00 (MDT). Please confirm the controlling local time for submission. The deadline is 12pm MT on 10/30/2026. Delivery pricing. The instructions state freight shall be added to another line item and not be its own line item, yet the schedule includes line item 0018 "Delivery." Should delivery/freight be priced in line item 0018, or folded into line item 0001 with 0018 marked accordingly? Freight costs may be added to the delivery line item if the offeror deems appropriate. If the tables are not pre-assembled, the Offeror will need to include installation/assembly fees in the delivery line item total. *Be sure to make a note that installation/assembly is needed. Installation. Is installation/set-up of the tables required at either delivery location (Salt Lake City and Ogden), or is delivery only required? If set-up is required, will VA personnel escort access be arranged through the receiving facility? If the tables are pre-assembled, installation shall not be required. However, if assembly of the table is required, the Offeror should include those costs in their quote and should plan to be onsite to install/assemble each table. VA staff may escort visitors IF installation/assembly of the product is needed. This may be discussed during the post-award meeting. Authorized distributor letter. Must the VAAR 852.212-71(c) letter from the OEM name the offeror specifically, or is a general letter of authorization from the manufacturer sufficient? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Line item 0013 option code. Line item 0013 references option "92CSAF" (rocker foot pedal substitute for air at foot end). Please confirm this is the correct Hill Laboratories option code for the requested item. Yes, this is the correct code Installation: the delivery section is titled "Delivery and Installation" and asks for lead time "including installation, if applicable." Is any installation, assembly or setup required, or is delivery to the receiving area at each site sufficient? The station team will either expect the table to come pre-assembled OR the Offeror will need to plan to assemble the tables onsite. Any fees associated with installation/assembly should be included in the delivery line item. If the tables are already pre-assembled, then the VA staff will be able to take possession of the item upon delivery and then they will move the table to the clinic location. Authorized distributor letter (VAAR 852.212-71(c)): if the offeror is not the manufacturer, will a letter from the manufacturer authorizing the offeror to supply this specific order satisfy the requirement? If the Offeror is not the manufacturer of the product they are offering, they must provide an authorized distributor letter from the manufacturer. The letter must be from the manufacturer stating the Offeror is authorized to sell/distribute the manufacturer s product to the Government. The letter may be on letterhead an/or an email but it must clearly be from the manufacturer and specify the Offeror. Required delivery date: is there a required delivery date or a maximum acceptable lead time after award? A target delivery date is not available. Offerors are encouraged to provide the most accurate delivery lead time possible based on information currently available from the manufacturer. This is an evaluation factor so Offeror s information will be compared. May a small-business equipment distributor registered under NAICS 423450 submit a quotation for this solicitation, which is assigned NAICS 339113? NAICS 423450 shows a size standard of 200 employees while the NAICS for this requirement, 339113, is 800 employees. Therefore, as long as the Government is able to verify the Offeror has a NAICS in which it confirms their company size is below 800 employees, the Offeror should not be considered ineligible Does the SBA nonmanufacturer rule apply to this procurement, and if so, is a waiver available? Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. Would an authorized reseller offering the specified Hill Laboratories equipment qualify, provided all technical specifications and manufacturer authorization requirements are satisfied? Yes. Offerors who obtain an authorized distributor letter from Hill Laboratories may submit a quote package to include the Hill Laboratories products. Air system: The specifications require air power but exclude pneumatic systems. Is the Hill Air Flex II s compressed-air system acceptable? The previous specification had a typo the system should be air-powered/pneumatic system. Headpiece: CLIN 0004 specifies an air-activated forward/straight drop, while the salient characteristics require a manual drop. Which is required? Please also confirm the intended configuration for AF-F22 headpiece motion with AF-F27 automatic distraction. Air powered drop is required. The distraction motion required is intended to stretch the neck in a superior motion like a decompression table would do and requires a headpiece to attach to the table so this distraction therapy can be done. See example video of how this feature should operate. https://www.youtube.com/watch?v=NEYLT0R_meA Weight: Does the 300 lbs. maximum include all installed accessories? Is there an allowable tolerance for the fully configured brand-name table? The weight of the table can exceed 300lbs if needed because of other accessories. The table itself should not exceed 300 lbs. Delivery: Please confirm the required delivery timeframe and whether room placement, setup, functional testing, demonstration, and packaging removal are required at both locations. The delivery timeline will be discussed with the awarded vendor after award of contract. Offerors shall provide their best estimate of the delivery/lead time for the items within their quote package as this will be compared to other quotes. It is common for the tables to be pre-assembled so only delivery to the facility would be expected unless assembly is needed for a brand of table. Offerors should factor in the installation/assembly time and costs IF there are any. Freight pricing: Should delivery be priced under CLIN 0018 or incorporated into the equipment lines, given the instruction against a separate freight line? Offerors shall use their best judgement. It may be easiest to just include any delivery and installation/assembly costs under line item 0018 but that is not mandatory. Reseller authorization: Will an OEM letter authorizing __ to supply the specified equipment for this solicitation satisfy the authorization requirement? Yes. A letter or email from the OEM stating the offeror is authorized to provide their product to the Government is sufficient. Deadline time zone: Please confirm whether the October 23 question deadline and October 30 quote deadline are noon Denver local time (MDT) or noon MST. The deadlines are Mountain Time. We are currently in MDT but this shall change to MST on 11/1/2026. This acquisition is a Total Small Business Set-Aside under NAICS 339113. The referenced brand, Hill Laboratories, appears to be other than small. FAR 52.219-33 (Nonmanufacturer Rule) is listed in the clause matrix but is not marked applicable. Please confirm whether the Nonmanufacturer Rule applies, and if so, whether an SBA class waiver is in place that would permit a small business offeror to supply the Air Flex II or an equal product from a large manufacturer. Since this requirement is set-aside for small businesses, and the requirement is not expected to exceed the Simplified Acquisition Threshold, the limitations associated with the nonmanufacturer rule shall not apply. Offerors may provide products manufactured by both small and large businesses. **The manufacturer for the Air Flex II, Hill Laboratories, has been confirmed to be a small business per SAM.gov Reps and Certs. The Description states "Freight shall be added to another line item and not be its own line item," but Line Item 0018 is titled "Delivery" with a quantity of 2 EA. Please clarify where freight should be priced. The Offeror may add the cost of freight to the delivery line item (#0018) or to the first line item if appropriate. The salient characteristics cap the weight of the table and equipment at 300 lbs. Please confirm whether this applies to the base table only or to the fully configured table with all listed options. This applies to base table only. Please confirm that Line Item 0018, quantity 2 EA, represents one delivery to each of the two locations. Correct, the quantity of 2 is due to one table EACH needing to be delivered to two separate locations. Therefore, delivery would be completed as two jobs. For the VAAR 852.212-71(c) manufacturer authorization, is a signed letter from the OEM on its letterhead (naming __ as an authorized distributor for this solicitation) sufficient, or is a specific format required? No specific format. Just some letter/email from the OEM stating the Offeror is authorized to sell their product to the Government. If an "equal" product is offered, should the authorization letter come from that product's manufacturer? Yes. An authorization letter is only needed from the OEM of the brand product the Offeror is offering. Is a delivery lead time after award stated in days (e.g., ARO) acceptable for Volume III, or is there a required delivery date? Yes. Offerors shall indicate the estimated number of days After Receipt of Order (ARO) of the contract in which the Offeror would be able to deliver the product to the locations once they receive the awarded contract. A specific date is not needed as the Government understands that it would be difficult to calculate since we do not know the specific date in which this requirement will be awarded.
80%
Combined Synopsis10/30/2026
Page 2 of 2 Please see below for answers to questions received regarding solicitation 36C26226Q1325. All other terms and conditions remain unchanged. Clarification of the correct proposal/solicitation response due date Responses are due Friday, September 11, 2026. Clarification and reconciliation of the Period of Performance and initial delivery schedule The period of performance will be for one year Due to the complexity and customization of this product, custom surgical packs shall take no more than 24 weeks to produce, sterilize, and deliver for the initial order after commencement of the forthcoming contract. Confirmation of whether any option periods are identified for this requirement There are no option periods for this requirement. Review and reconsideration of the standard delivery timeline, consistent with industry standard of 2 3 days Pack deliveries shall be made two business days after receipt of an order if placed before 1:00 p.m. PST, and within three (3) calendar days for orders placed after 1:00 p.mAre the two and three days the amount of days they have to ship the items, or the items have to be delivered? The comment was correct that requirement as almost impossible for non-local vendors to meet. They must get adequate processing time for each order. GLA will have to be responsible and take process and shipping times into consideration when placing orders. Keeping it this way greatly reduces competition. . Orders shall be delivered no more than three (3) business days. Consideration of a purchasing commitment of at least 60 days in connection with the three-month inventory requirement The contractor must maintain at least three (3) months completely assembled custom packs onpacks on hand at all times, The government will make no purchasing commitments above the minimum dollar threshold identified in the requirements contract. Clarification or reconsideration of the monthly-in-arrears invoicing structure Per government regulations payment is due 30 days after the latter of receiving a proper invoice or government acceptance of the items. Billing monthly ensures a streamlined and consistent process for managing payments .payments. Inclusion of FAR 52.225-1, Buy American Supplies, consistent with the stated Buy American Act evaluation factor See pages 3-6 for inclusion of FAR 52.225-1, Buy American Supplies and FAR 52.225-2, Buy American Certificate. Additionally, Factor 2 of the Evaluation Factors on page 41 of the RFQ now reads: ii. Factor 2 The Offeror shall identify the percentage of items within the proposed custom surgical and non surgical packs that are manufactured in the United States. The Offeror shall also identify the percentage of items manufactured in each foreign country, clearly listing the countries of origin and the proportion of total components sourced from each location. The Offeror must ensure the percentages provided are accurate and reflect the total composition of each pack. In addition, the Offeror shall complete and submit the Buy American Certificate and Made in America Certificate PPE included in this solicitation. Removal or clarification of the Non-Manufacturer Rule Compliance evaluation factor in light of the standing waiver Per VA regulation, a certification is still required for SDVOSB/VOSB set asides. Evaluation factor #3 will remain in the solicitation unchanged. Clarification on Make PPE in America Act applicability to sterile surgical gowns A waiver for all non-domestic items relevant to this acquisition is under review. Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (Oct 2022). As prescribed in 25.1101 (a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): The cost of its components mined, produced, or manufactured in the United States exceeds 65%  percent of the cost of all its components. (End of clause) 52.225-2 Buy American Certificate As prescribed in 25.1101(a)(2), insert the following provision: Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b)Foreign End Products: Line Item No. Country of Origin Exceeds 65% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) 852.225-70 MADE IN AMERICA-PPE ([MAY 2026]) (DEVIATION) (a) Definitions. As used in this clause Component, as applied to an item described in subsection (b) of this clause, means an article, material, or supply incorporated directly into PPE. Domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE, including the materials and components thereof, that is grown, reprocessed, reused, or produced in the United States. Foreign-made domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE that is assembled outside the United States containing only materials and components that are grown, reprocessed, reused, or produced in the United States. Foreign PPE means PPE other than domestic PPE or foreign-made domestic PPE. PPE, as applied to an item described in subsection (b) of this clause, means surgical masks, respirator masks and powered air purifying respirators and required filters, face shields and protective eyewear, gloves, disposable and reusable surgical and isolation gowns, head and foot coverings, and other gear or clothing used to protect an individual from the transmission of disease. United States, as applied to an item described in subsection (b) of this clause, means the 50 States, the District of Columbia, and the possessions of the United States. (b) The Contractor must deliver only domestic PPE, unless it specified delivery of foreign-made domestic or foreign PPE in the provision of the solicitation entitled Made in America Certificate PPE". (c) The Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (End of clause) 852.225-71 MADE IN AMERICA CERTIFICATE PPE (MAY 2026) (DEVIATION) (a)(1) The Offeror certifies that each item of PPE is either domestic, foreign made domestic, or foreign. (2) The terms domestic PPE, foreign-made domestic PPE, foreign PPE, and PPE, are defined in the clause of this solicitation entitled Made in America PPE . (3) The Offeror understands that the Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (b) The Offeror must list all offered PPE in the table and indicate the category of PPE (domestic, foreign-made domestic, or foreign). Line Item No. Country of Origin Domestic PPE, Foreign-made PPE, Foreign PPE ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (c) In the event the Department of Veterans Affairs determines both domestic personal protective equipment and foreign-made domestic personal protective equipment are not available due to nonavailability or unreasonable cost, the Contractor shall comply with the clauses at Federal Acquisition Regulation (FAR) 52.225-1 Buy American Supplies or 52.225-3 Buy American Free Trade Agreements Israeli Trade Act and the provisions at FAR 52.225-2 Buy American Certificate or 52.225-4 Buy American Free Trade Agreements Israeli Trade Act Certificate or the clause at FAR 52.225-5 Trade Agreements and the provision at FAR 52.225-6 Trade Agreements Certificate, as identified in the solicitation. (End of provision)]
74%
Combined Synopsis09/11/2026
SIX (6) MIDMARK 626 BARRIER FREE EXAM CHAIRS
72%
Market Research11/19/2026
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339113 (size standard of 800 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) San Diego Healthcare System is seeking sources capable of providing medical grade bed covers equivalent to Stryker IsoTour. The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required. Statement of Work: Bed Covers Introduction: The purpose of this Statement of Work (SOW) is to establish a firm fixed-price Blanket Purchase Agreement (BPA) to procure bed covers equivalent to Stryker IsoTour covers for base plus four option years. This requirement is intended to streamline the acquisition of these specific components to ensure the continued operational readiness of medical equipment. Scope of Work: The contractor shall provide the necessary parts as specified in the technical requirements section of this SOW. This is a BPA intended for recurring requirements; the government will issue individual delivery orders against this agreement as need arises during the period of performance. Period of Performance: The BPA shall remain in effect for a base period of one (1) year from the date of establishment, with four (4) optional one-year renewal terms, subject to government funding and performance evaluation. Base: 1/1/2027 12/31/2027 Option Year 1 (OY1): 1/1/2028 12/31/2028 Option Year 2 (OY2): 1/1/2029 12/31/2029 Option Year 3 (OY3): 1/1/2030 12/31/2030 Option Year 4 (OY4): 1/1/2031 12/31/2031 Deliverables: The chart below is estimated quantities for base and all option years; quantities are not a contractual statement of precise quantities that the Government will order. The quantities given are estimated only, and no guarantee of their accuracy is either given or implied. The Government will only pay for quantities that are actually ordered per each delivery order and for which the services are fulfilled. Item Description Base Estimated Quantity OY1 Estimated Quantity OY2 Estimated Quantity OY3 Estimated Quantity OY4 Estimated Quantity Top Covers Equivalent to Stryker IsoTour 63 63 251 63 63 Bottom Covers Equivalent to Stryker IsoTour 63 63 251 63 63 Salient Characteristics: NOTE: All parts must be new, unused, and in their original manufacturer packaging. No refurbished or third-party alternative parts will be accepted. VAAR 852.212-71 Gray Market and Counterfeit Items clause applies on this acquisition. No remanufacturers or gray market items will be acceptable. The contractor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other signed documents from the OEM. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all the manufacturer s products. This letter must be on the manufacturer s letterhead and contains the signature of an authorized official for the manufacturer. If the offerors fail to provide a signed letter from the OEM (unless the contractor is the OEM), your quote will not be evaluated for award. If you are the OEM, state so in your quote response. Bed covers shall not void or adversely affect any existing manufacturer warranties applicable to the Stryker Model 2872 IsoTour Gel Support Surface. The contractor shall provide documentation demonstrating compatibility with the OEM mattress system and that use of the replacement cover will not negatively impact warranty coverage. Bed covers shall be fully compatible with the Stryker Model 2872 IsoTour Gel Support Surface and shall fit the existing mattress without modification to the mattress or stretcher system. Bed covers must be medical grade. Bed covers must be fluid-resistant or fluid proof. Bed covers shall permit normal use of all existing mattress attachment mechanisms. Top covers shall be designed to fit IsoTour Gel Support Surface mattresses measuring 78.75" (200 cm) L x 35.5" (90.2 cm) W x and 9.5" (24.1 cm) H. Bottom covers shall be designed to fit mattresses measuring 84.25 (213.9 cm) in L x 35.5" (90.2 cm) W and shall securely interface with the corresponding top cover to maintain intended mattress function and patient support. Schedule: Deliverables shall be provided upon the issuance of a BPA delivery order. The contractor shall provide the following: Order Acknowledgement: Within two (2) business days of receiving the order. Shipping Notification: Including tracking numbers and expected delivery dates. The following delivery addresses are applicable, and the vendor will be instructed where to deliver order. Place of Performance: The contractor will be instructed where to deliver each delivery order. VA San Diego Healthcare System 3350 La Jolla Village Drive San Diego, CA 92161 Delivery hours 7am-3pm M-F, Federal holidays excepted VA Off-Site Warehouse 9755 Birch Canyon Pl, Ste 100 San Diego, CA 92126 Delivery hours: 7am-3pm M-F, Federal holidays excepted Federal Holidays: New Year s Day January 1 Martin Luther King s Birthday 3rd Monday in January Presidents Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth Day June 19 Independence Day July 4 Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day November 11 Thanksgiving Day 4th Thursday in November Christmas Day December 25th The President of the United States of America may declare additional days as a Federal holiday, and if so, this holiday will automatically be added to the list above. When a holiday falls on a Sunday, the following Monday shall be observed as a Federal holiday. When a holiday falls on a Saturday, the preceding Friday shall be observed as a Federal Holiday. Quality Assurance and Inspection: The government reserves the right to inspect all delivered items. Any parts that arrive damaged, incorrect, or fail to meet the OEM specifications defined in Section 3.0 will be rejected and returned at the vendor's expense. Replacement parts must be provided within ten (10) business days of the rejection notice. Special Instructions Invoicing: Invoices shall be submitted electronically via Tungsten or the designated government payment system, referencing the specific purchase order numbers, which shall be provided on each delivery order. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of SOW requirements. For instances where your company cannot meet the SOW requirement(s), please explain. For instances where your company can meet the SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) Please indicate whether your product conforms to the requirements of the Buy American Act? (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained. (15) Does your organization offer a leasing solution? Please elaborate. (16) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (17) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (18) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (19) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to Hestia.Sim@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, November 20, 2026, by 10 AM Pacific Local Time. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
70%
Market Research11/20/2026

Additional Details

Solicitation Number

36C26226Q0488

Archive Date

Apr 19, 2026

Office Address

Gilbert, AZ, 85297