Notice ID: 120ef2ec63334cb5a7dbefbfe2b06d8aSources Sought
6530--Guildmann OR EQUAL Patient Transfer Equipment
Archived on May 6, 2026. Sources Sought posted by VETERANS AFFAIRS, DEPARTMENT OF on March 20, 2026. Solicitation 36C26226Q0540.
NAICS 339113 (Surgical Appliance and Supplies Manufacturing). Original response deadline: . Full description on SAM.gov.
Description
THIS REQUEST FOR INFORMATION (RFI) SOURCES SOUGHT IS ISSUED SOLELY FOR MARKET RESEARCH AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION 1. Responses to this Sources Sought must be in writing. The purpose of this Sources Sought Announcement is for market research only to make appropriate acquisition decisions and to gain knowledge of Small Businesses, including Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses (SDVOSB/VOSB), who are interested in submitting proposals for this procurement and who are capable of performing the work required for this procurement. 2. The suggested NAICS for this requirement is 339113 Surgical Appliance and Supplies Manufacturing 3. The Contractor shall deliver Patient Lifts that can meet the required Statement of Work (see attached Draft SOW) to VA Medical Center located at 3350 La Jolla Village Drive, San Diego CA 92161. 4. The required services shall be provided by the contractor along with all resources necessary to accomplish the deliverables described in Statement of Work (SOW). See attached Draft SOW. 5. Interested and capable Contractors are encouraged to respond to this notice not later than Monday, April 6, 2026, at 8:00 AM Pacific Time (PT), by providing the following information via email only to Dyne.Kim@va.gov. (a) Company name (b) Address (c) Point of contact (d) Phone, fax, and email of primary point of contact (e) Contractor s Unique Entity ID (SAM) number (f) Type of small business, if applicable, (e.g. Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), 8(a), HUB-Zone, Woman Owned Small Business, Small Disadvantaged Business, or Small Business). (g) Statement indicating whether your company is considered small under the size standard for the NAICS code identified under this RFI. Responses are welcome to specify a different NAICS in which they could meet this requirement. (h) Statement indicating the brand name, model, and product description of the patient lift product referenced above that you intend to provide for this procurement. (i) Statement indicating the name of the company whose patient lift product you intend to provide, the country of origin for the patient lift product you intend to provide, and whether the company that manufactures that product is a small business under the size standard for the NAICS code identified under this RFI, or a different NAICS. Please elaborate whether the Buy American Statute and/or Trade agreement apply to the product that you intent to provide for this procurement. (j) Statement indicating whether you are an authorized distributor of the patient lift product that you intend to provide for this procurement or not. If you intend to provide a patient lift product manufactured by a company other than your own, please include an approval letter from the manufacturer accepting you as an authorized distributor and answer the following questions: Does your firm exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS Code 541519)? Is your firm primarily engaged in the retail or wholesale trade and normally sells the type of item you intend to provide? Does your firm take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? Will your firm supply the end item of a small business manufacturer, processor or producer made in the United States, or obtains a waiver of such requirement pursuant to 13 CFR 121.406(b)(5)? If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? Notice: No gray market or remanufactured items will be acceptable. Gray market items are Original Equipment Manufacturers (OEM) good sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new equipment only. The vendor shall be an OEM, authorized dealer, authorized distributor, authorized reseller, verified by an authorization letter or other documents from the OEM. (k) Statement indicating if you have a current contract to provide the patient lift product that you intend to provide for this procurement under either the General Services Administration (GSA) Federal Supply Schedule (FSS) or with the VA National Acquisition Center (NAC), National Aeronautics and Space Administration (NASA) Solutions for Enterprise-Wide Procurement (SEWP), or any other federal contract. If yes, provide the contract type and contract number, identity the federal agency with whom you hold that contract, and whether the product you intend to supply under this procurement is listed on your referenced schedule/contract. (l) Statement indicating how many calendar days after receipt of order (ARO) you estimate it would take you to deliver the patient lift product that you intend to provide for this procurement to the requesting facility. (m) General pricing for your patient lift product. This information will be used for VA internal market research purposes and pricing information received in response to this RFI will not be shared by the Contract Specialist. (n) Provide documented self-attestation/certification that the patient lift product you intend to provide for this procurement meets any regulatory expectations by the US Government (ea. The U.S. Food and Drug Administration (FDA) classification system of medical devices, places ceiling lifts as Class I category. Class I devices are deemed to be low risk, and manufacturers/authorized distributors are allowed to self-declare that they conform to all required standards.) (o) A capability statement that provides detailed information for one or more reference contracts that demonstrate your experience providing patient lift product that meets the requirements described in the attached Draft Salient Characteristics. GENERAL STATEMENTS OF CAPABILITY ARE NOT ACCEPTABLE. Respondents must provide the following information for each reference contract the respondent identifies as evidence of the respondent s capability to perform the work required by this procurement. Respondents must provide the following information for each reference contract: (1) the legal name of entity with whom the respondent held the contract; (2) the contract number; (3) a description providing details of the specific tasks the respondent performed under that contract other than delivery of the requested product; (4) the dates during which the respondent performed the contract; (5) the name, phone number, and email address of a person at the entity with whom the respondent held the contract who can verify the information the respondent provides regarding this reference contract. NOTE: The information requested above is required for the Government to evaluate whether there are sufficient small business concerns of a particular type who are capable of performing the work required by this procurement to determine if this procurement should be set aside for a given type of small business concern. failure to submit all of the information requested above to support a respondent s claimed experience may be viewed by the government as evidence that the respondent lacks the ability to provide the patient lift product required by this procurement. this, in turn, may affect the government s determination about whether the requirements for a set-aside procurement have been met. 5. All Offerors who provide goods or services to the United States Government must be registered in the System for Award Management (SAM) database found at https://www.sam.gov. Registration must include Representations and Certifications. --End of Sources Sought Announcement-- DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
Overview
Agency:
Department of Veterans Affairs
Office:262-NETWORK CONTRACT OFFICE 22 (36C262)
Posted:March 20, 2026
NAICS:339113: Surgical Appliance and Supplies Manufacturing
Last Updated:Aug 21, 2026
PSC:6530: HOSPITAL FURNITURE, EQUIPMENT, UTENSILS, AND SUPPLIES
Response Deadline:
Set-Aside:Not specified
Type:Sources Sought
Place of Performance:VA San Diego Healthcare System Jennifer Moreno Medical Center
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Documents
Select documents to download
Showing 2 of 2 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Sources Sought | VETERANS AFFAIRS, DEPARTMENT OF | Mar 20, 2026 | 20.75 KB | |||
| Sources Sought | VETERANS AFFAIRS, DEPARTMENT OF | Mar 20, 2026 | 158.31 KB |
Lifecycle
Solicitation:
36C26226Q0540- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentMar 20, 2026
6530--Guildmann OR EQUAL Patient Transfer Equipment
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
| Awarded | 339113 | No Set-Aside | 09/17/2026 | Open | - | ||
| Awarded | 339113 | No Set-Aside | 09/24/2026 | Open | - | ||
| Awarded | 339113 | No Set-Aside | 09/24/2026 | Open | - | ||
| Awarded | 339113 | Total Small Business Set-Aside | 09/18/2026 | Open | - | ||
Page 2 of 2 Please see below for answers to questions received regarding solicitation 36C26226Q1325. All other terms and conditions remain unchanged. Clarification of the correct proposal/solicitation response due date Responses are due Friday, September 11, 2026. Clarification and reconciliation of the Period of Performance and initial delivery schedule The period of performance will be for one year Due to the complexity and customization of this product, custom surgical packs shall take no more than 24 weeks to produce, sterilize, and deliver for the initial order after commencement of the forthcoming contract. Confirmation of whether any option periods are identified for this requirement There are no option periods for this requirement. Review and reconsideration of the standard delivery timeline, consistent with industry standard of 2 3 days Pack deliveries shall be made two business days after receipt of an order if placed before 1:00 p.m. PST, and within three (3) calendar days for orders placed after 1:00 p.mAre the two and three days the amount of days they have to ship the items, or the items have to be delivered? The comment was correct that requirement as almost impossible for non-local vendors to meet. They must get adequate processing time for each order. GLA will have to be responsible and take process and shipping times into consideration when placing orders. Keeping it this way greatly reduces competition. . Orders shall be delivered no more than three (3) business days. Consideration of a purchasing commitment of at least 60 days in connection with the three-month inventory requirement The contractor must maintain at least three (3) months completely assembled custom packs onpacks on hand at all times, The government will make no purchasing commitments above the minimum dollar threshold identified in the requirements contract. Clarification or reconsideration of the monthly-in-arrears invoicing structure Per government regulations payment is due 30 days after the latter of receiving a proper invoice or government acceptance of the items. Billing monthly ensures a streamlined and consistent process for managing payments .payments. Inclusion of FAR 52.225-1, Buy American Supplies, consistent with the stated Buy American Act evaluation factor See pages 3-6 for inclusion of FAR 52.225-1, Buy American Supplies and FAR 52.225-2, Buy American Certificate. Additionally, Factor 2 of the Evaluation Factors on page 41 of the RFQ now reads: ii. Factor 2 The Offeror shall identify the percentage of items within the proposed custom surgical and non surgical packs that are manufactured in the United States. The Offeror shall also identify the percentage of items manufactured in each foreign country, clearly listing the countries of origin and the proportion of total components sourced from each location. The Offeror must ensure the percentages provided are accurate and reflect the total composition of each pack. In addition, the Offeror shall complete and submit the Buy American Certificate and Made in America Certificate PPE included in this solicitation. Removal or clarification of the Non-Manufacturer Rule Compliance evaluation factor in light of the standing waiver Per VA regulation, a certification is still required for SDVOSB/VOSB set asides. Evaluation factor #3 will remain in the solicitation unchanged. Clarification on Make PPE in America Act applicability to sterile surgical gowns A waiver for all non-domestic items relevant to this acquisition is under review. Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (Oct 2022). As prescribed in 25.1101 (a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): The cost of its components mined, produced, or manufactured in the United States exceeds 65%  percent of the cost of all its components. (End of clause) 52.225-2 Buy American Certificate As prescribed in 25.1101(a)(2), insert the following provision: Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b)Foreign End Products: Line Item No. Country of Origin Exceeds 65% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) 852.225-70 MADE IN AMERICA-PPE ([MAY 2026]) (DEVIATION) (a) Definitions. As used in this clause Component, as applied to an item described in subsection (b) of this clause, means an article, material, or supply incorporated directly into PPE. Domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE, including the materials and components thereof, that is grown, reprocessed, reused, or produced in the United States. Foreign-made domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE that is assembled outside the United States containing only materials and components that are grown, reprocessed, reused, or produced in the United States. Foreign PPE means PPE other than domestic PPE or foreign-made domestic PPE. PPE, as applied to an item described in subsection (b) of this clause, means surgical masks, respirator masks and powered air purifying respirators and required filters, face shields and protective eyewear, gloves, disposable and reusable surgical and isolation gowns, head and foot coverings, and other gear or clothing used to protect an individual from the transmission of disease. United States, as applied to an item described in subsection (b) of this clause, means the 50 States, the District of Columbia, and the possessions of the United States. (b) The Contractor must deliver only domestic PPE, unless it specified delivery of foreign-made domestic or foreign PPE in the provision of the solicitation entitled Made in America Certificate PPE". (c) The Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (End of clause) 852.225-71 MADE IN AMERICA CERTIFICATE PPE (MAY 2026) (DEVIATION) (a)(1) The Offeror certifies that each item of PPE is either domestic, foreign made domestic, or foreign. (2) The terms domestic PPE, foreign-made domestic PPE, foreign PPE, and PPE, are defined in the clause of this solicitation entitled Made in America PPE . (3) The Offeror understands that the Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (b) The Offeror must list all offered PPE in the table and indicate the category of PPE (domestic, foreign-made domestic, or foreign). Line Item No. Country of Origin Domestic PPE, Foreign-made PPE, Foreign PPE ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (c) In the event the Department of Veterans Affairs determines both domestic personal protective equipment and foreign-made domestic personal protective equipment are not available due to nonavailability or unreasonable cost, the Contractor shall comply with the clauses at Federal Acquisition Regulation (FAR) 52.225-1 Buy American Supplies or 52.225-3 Buy American Free Trade Agreements Israeli Trade Act and the provisions at FAR 52.225-2 Buy American Certificate or 52.225-4 Buy American Free Trade Agreements Israeli Trade Act Certificate or the clause at FAR 52.225-5 Trade Agreements and the provision at FAR 52.225-6 Trade Agreements Certificate, as identified in the solicitation. (End of provision)] | Combined Synopsis | 339113 | Service-Disabled Veteran-Owned Small Business Set-Aside | 09/11/2026 | 09/11/2026 | - |
Additional Details
Solicitation Number
36C26226Q0540
Archive Date
May 6, 2026
Office Address
Gilbert, AZ, 85297