Notice ID: 47ff3b31231e452eb16553b69782455aCombined Synopsis/SolicitationArchived
6515--Surgical Slush Machine
Archived on July 4, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM PDT
- Posted
- May 27, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 339113: Surgical Appliance and Supplies Manufacturing
- Agency
- Department of Veterans Affairs
Notice details
- Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262)
- Place of performance
- Department of Veterans Affairs VA Tucson Healthcare System, Tucson, Arizona, 85723
- Last updated
- Oct 29, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 36C26226Q0869
- Notice ID
- 47ff3b31231e452eb16553b69782455a
Description
This is a combined synopsis/solicitation of total small business set aside for commercial supplies prepared in accordance with the format in Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a request for quotes under solicitation number: 36C26226Q0869 The Department of Veterans Affairs Network Contracting Office (NCO) 22 is looking for a contractor who can supply Surgical Slush Machine equivalent to Microtek Hush Slush 2.0, 4L Slush Basin Capacity with warmer and its draping. VA Tucson Healthcare System located at 3601 S. 6th Avenue, Tucson, AZ 85723. The Contractor shall furnish all supplies/services to VA Tucson Healthcare System. Shipping term is FOB Destination. Shipping must be included in the unit cost. VAAR 852.212-71 Gray Market and Counterfeit Items applies on this acquisition. No remanufacturers or gray market items will be acceptable. Vendor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other documents from the OEM signed. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all the manufacturer s products. This letter must be on the manufacturer s letterhead and contains the signature of an authorized official for the manufacturer. NOTE: Potential offers must be aware that the items being acquired are procured as Brand Name or Equal. For those items that are or equal , a description of the salient characteristics is outlined below. It is offeror s responsibility to demonstrate its offer meeting the salient physical and functional characteristics included in this solicitation. If the offer does NOT demonstrate, the offer will be considered non-responsive. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can satisfy the requirement by providing the brand name or equal to the supplies being requested. Line Item Description Qty UOM 0001 Surgical Slush Machine equivalent to Microtek Hush Slush 2.0, 4L Slush Basin Capacity with warner Model# ESW7L 3 EA 0002 Slush Machine Drape equivalent to Microtek ESD340 (24EA/CS) 1 CS The solicitation will be in accordance with FAR Part 12 and 19, Acquisition of Commercial Items, Simplified Acquisition Procedures, Small Business Programs, and Veteran Affairs Acquisition Regulations as supplemented with additional information in this notice. The North American Industrial Classification System (NAICS) code for this requirement is 339113, Size Standard 800 Employees. The Contractor shall adhere to all federal and state laws and regulations in effect during the term of this contract. The Government intends to award a firm-fixed-price contract. The Contract begins on the date of award. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications Commercial Products and Commercial Services. Contracting officers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM. In advancement of Section 2 of Executive Order 14208, the removal of requirements related to Executive Order 14057 eliminates all non-statutory sustainability requirements or preferences in purchases of food service wares, including paper straws. In addition to removing requirements related to Executive Order 14057, the attachment also reflects recent updates to Code of Federal Regulation citations for the U.S. Department of Agriculture s BioPreferred® Program, a statutory purchasing preference program. Key solicitation milestones are: Submit any questions regarding this procurement via email to Hestia.Sim@va.gov no later than 10am Pacific Local Time Monday, June 1, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. Due to time constraints, responses to the solicitation shall be due on Thursday, June 4, 2026 at 10:00 Pacific Time. Offerors are advised that it is your responsibility to review and monitor the website frequently to ensure you have the most up to date information, including amendments. Correspondence or questions may be directed to Hestia Sim, Contracting Specialist at Hestia.Sim@va.gov with " 36C26226Q0869, Surgical Slush Machine in the subject line within 48 hours of release of this notice. Telephone inquiries will not be honored. Inquiries after the allotted period may not be responded to due to the time constraints of the procurement. All offerors must be registered in www.sam.gov to do business with the Government. Ensure your registration is correct, current and has not expired. Interested contractors must submit the following at a minimum: Complete quote specifying the brand name and model number For equal to products, documentation, proofs, and/or product brochure demonstrating that their equal to products meet all listed salient characteristics Product lead time An authorized distributor letter signed by the original equipment manufacturer (OEM) that is less than a year old.
Award Overview
Possible prior contract
Inferred, not confirmedInferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.
Vendor
INTERIOR FUSION LLCContract end date
Sep 28, 2025
NAICS
339113
Agency
Department of Veterans Affairs
Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.
Contacts
Contracting Officer
Primary Contact
Hestia Sim
Contract Specialist
Documents
Files (1)
- Download
36C26226Q0869.docx
105 KBAdded in Combined Synopsis/Solicitation version 3Posted
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
6515--Surgical Slush Machine
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Surgical implants were purchased from Mandatory SAC Contract #36C10G24D0041, which Howmedica Osteonics Corp currently holdsThis procurement for Implant Supplies falls under statutory Authority Title 38, U.S.C. 8123 per VHA Directive 1081.1 as per physician order in accordance with VAAR 808.002. | 80% | Awarded | Open |
Surgical Eye Stretchers needed, see Statement Of w/ork | 78% | Market Research | 07/28/2025 |
ANESTHESIA MACHINES | 76% | Market Research | 10/30/2026 |
Sources Sought Notice Sources Sought Notice Page 16 of 16 Sources Sought Notice *= Required Field Sources Sought Notice Page 1 of 16 REQUEST FOR INFORMATION 1. DESCRIPTION The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Surgical Tissue Management System product line as a candidate for a VA-wide (otherwise referred to as national ) single Requirements contract award. The Department of Veterans Affairs (DVA) Office of Procurement, Acquisition and Logistics (OPAL) Strategic Acquisition Center (SAC) on behalf of VHA is issuing this Sources Sought Notice in accordance with the FAR 10.001(b) to determine the availability and technical capabilities of qualified sources. The SAC in conjunction with VHA is seeking a qualified source to provide Olympus ESG-410 brand name or equal for the Surgical Tissue Management System on an agency wide basis. VA intends to award a Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contract to a supplier of this equipment. Vendors will be required to deliver the Surgical Tissue Management System to VA medical centers and facilities throughout the United States and its territories. The anticipated period of performance is for one (1) 12-month base period with four (4) 12-month option periods from the date of award. However, the Government's decision as to whether to continue with the contract, upon annual review, will be based upon successful performance during each previous year and continued need. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 - Surgical Appliance and Supplies Manufacturing, Product Service Code: 6515 Medical and Surgical Instruments, Equipment, and Supplies and the associated size standard is 1,000 employees. The FAR Provision found at 52.204-7(b)(1) requires that All interested Offerors must be registered in SAM.gov prior to submitting an offer or quotation. You may access the website at SAM.gov | Home. All offerors must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB offerors must be verified in the SBA database at: https://veterans.certify.sba.gov/#search at the time of quote submission. This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This Sources Sought Notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to their current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes. 2. SCOPE OF WORK: The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Surgical Tissue Management System product line as a candidate for a VA-wide (otherwise referred to as national ) Requirements contract. The Surgical Tissue Management System is an advanced, energy-based surgical platform used across Veterans Affairs Medical Centers (VAMCs) in operating rooms, procedural suites, and endoscopy units to perform precise tissue coagulation, devitalization, cutting, and vessel sealing. The system delivers radiofrequency (RF) energy and ultrasonic energy through specialized electrodes and hand instruments to support uniform, noncontact coagulation with minimal tissue penetration, improved visualization, and reduced bleeding. Units that provide both radio frequency power to drive electrosurgical instruments and mechanical vibrations to power ultrasonic surgical instruments used in the process of joining or sealing blood vessels together. The unit typically features receptacle ports, various output settings, power levels, and control mechanisms to adjust the energy delivered to the surgical site. It may also have features such as audible alarms, power monitoring, and temperature regulation. This universal platform provides multiple energy modalities (ultrasonic, bipolar, and RF) to support a broad range of open, laparoscopic, and endoscopic procedures in general surgery, urology, and gynecology, helping reduce the number of separate generators and instruments required in the operating room. It is designed to enhance surgical efficiency, improve hemostasis, and support consistent, replicable outcomes across diverse clinical applications The primary hand instrument is a hybrid ultrasonic and bipolar electrosurgical device intended for use in open and laparoscopic procedures to cut, seal, coagulate, and dissect with two distinct modes of action: Seal & Cut and Seal Only. It is indicated for ligation and division of vessels (up to and including 7 mm), lymphatics, and tissue bundles, and may be used in minimally invasive or open surgical procedures where vessel sealing and tissue division are desired. The device is intended for single use only and has not been shown to be effective for tubal sterilization or tubal coagulation for sterilization procedures. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Surgical Tissue Management Systems to be used by clinicians throughout the VA medical centers and facilities. The period of performance is for a base of 12-months with four 12-month option periods. 3. REQUIREMENT This requirement will be solicited and awarded as a Brand Name or Equal which requires the quoter indicate that each product being offered as an equal product to the Olympus ESG-410 Surgical Tissue Management System. For each equal product, the offeror must include a description reflecting the salient characteristics (SC) and level of quality that will satisfy the salient physical, functional, or performance characteristics of the equal product(s) specified in the solicitation. The quoter must also clearly identify the item by brand name (if any) and make/model number. Finally, the quoter must include descriptive literature, such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer and clearly describe any modifications it plans to make to a product to make it conform to the solicitation requirements. Contract Line Items Manufacture Part Number Description Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4 001 Olympus WA91327U ESG-410 Surgical Energy Platform (SEP) 10 10 10 10 10 002 Olympus WA91302W Footswitch Double Pedaled, Wireless 10 10 10 10 10 003 Olympus WA91301W Footswitch Double Pedaled, Wired 10 10 10 10 10 004 Olympus WA95622A Power Cable, 4.5M, with angled plug 10 10 10 10 10 005 Olympus TC-E410 Cart 10 10 10 10 10 006 Olympus 784515 784515 PK FRONT LOADING SUPERSECT 5EA 10 10 10 10 10 007 Olympus WA22739S ESG PlasmaLoop - Long, Angled 10 10 10 10 10 008 Olympus WA22644S SP PlasmaNeedle - Long, Right-Angled 10 10 10 10 10 009 Olympus WA22742S ESG PlasmaLoop - Long, Small 10 10 10 10 10 010 Olympus WA22744S ESG PlasmaNeedle - Long, Right-Angled 10 10 10 10 10 011 Olympus WA22641S SP Plasma-OvalButton - Long 10 10 10 10 10 012 Olympus WA22666S SP Plasma-OvalButton 10 10 10 10 10 013 Olympus WA22741S ESG Plasma-OvalButton - Long 10 10 10 10 10 014 Olympus WA22766S ESG Plasma-OvalButton 10 10 10 10 10 015 Olympus 786500 786500 PK FRONT LOADING BUTTON 5EA 10 10 10 10 10 016 Olympus WA22657S SP PlasmaButton 10 10 10 10 10 017 Olympus WA22637S SP PlasmaLoop - Long, Medium 10 10 10 10 10 018 Olympus WA22638S SP PlasmaRoller - Long 10 10 10 10 10 019 Olympus WA22639S "SP PlasmaLoop - Long, Angled" 10 10 10 10 10 020 Olympus WA22737S ESG PlasmaLoop - Long, Medium 10 10 10 10 10 021 Olympus WA22738S ESG PlasmaRoller - Long 10 10 10 10 10 022 Olympus 784415 784415 FRONT LOADING SUPER-LOOP 5EA 10 10 10 10 10 023 Olympus WA22602S SP PlasmaLoop - Medium, 12 10 10 10 10 10 024 Olympus WA22603S SP PlasmaLoop - Large, 12 10 10 10 10 10 025 Olympus WA22606S SP PlasmaLoop - Medium, 30 10 10 10 10 10 026 Olympus WA22607S SP PlasmaLoop - Large, 30 10 10 10 10 10 027 Olympus WA22621S SP PlasmaBand - 12 10 10 10 10 10 028 Olympus WA22623S SP PlasmaBand - 30 10 10 10 10 10 029 Olympus WA22632S SP PlasmaLoop - Angled 10 10 10 10 10 030 Olympus WA22651S SP PlasmaRoller 10 10 10 10 10 031 Olympus WA22655S SP PlasmaNeedle - Angled 10 10 10 10 10 032 Olympus WA22605S SP PlasmaLoop - Small, 30 10 10 10 10 10 033 Olympus WA22702S ESG PlasmaLoop - Medium, 12 10 10 10 10 10 034 Olympus WA22703S ESG PlasmaLoop - Large, 12 10 10 10 10 10 035 Olympus WA22706S ESG PlasmaLoop - Medium, 30 10 10 10 10 10 036 Olympus WA22707S ESG PlasmaLoop - Large, 30 10 10 10 10 10 037 Olympus WA22721S ESG PlasmaBand - 12 10 10 10 10 10 038 Olympus WA22723S ESG PlasmaBand - 30 10 10 10 10 10 039 Olympus WA22732S ESG PlasmaLoop - Angled 10 10 10 10 10 040 Olympus WA22751S ESG PlasmaRoller 10 10 10 10 10 041 Olympus WA22755S ESG PlasmaNeedle - Angled 10 10 10 10 10 042 Olympus WA22760S ESG PlasmaButton 10 10 10 10 10 043 Olympus WA22640S SP PlasmaNeedle - Right-Angled 10 10 10 10 10 044 Olympus WA22642S SP PlasmaLoop - Long, Small 10 10 10 10 10 045 Olympus WA22705S ESG PlasmaLoop - Small, 30 10 10 10 10 10 046 Olympus WA22740S ESG PlasmaNeedle - Right-Angled 10 10 10 10 10 047 Olympus A22265C A22265C KNIFE 24-28FR 12/30 DEG 10 10 10 10 10 048 Olympus A22221C A22221C HF BAND 24 FR 12 DEG 10 10 10 10 10 049 Olympus A22257C A22257C HF CYL GROOVES 24-28FR 12/30DEG 10 10 10 10 10 050 Olympus WA22037C WA22037C HF LOOP 12DEG 12EA 10 10 10 10 10 051 Olympus WA22038C WA22038C HF ROLLER LONG 12DEG 12EA 10 10 10 10 10 052 Olympus WA22039C WA22039C HF ANGLED LOOP LONG 12EA 10 10 10 10 10 053 Olympus A22258C A22258C HF ROLLER LARGE 24-28FR 12/30DEG 10 10 10 10 10 054 Olympus A22205C A22205C HF LOOP 24FR .35 WIRE 30 DEG 10 10 10 10 10 055 Olympus A22261A A22261A CURETTE 24-28FR 12/30 DEG 10 10 10 10 10 056 Olympus A22201C A22201C HF LOOP 24FR .35 WIRE 12 DEG 10 10 10 10 10 057 Olympus A22201D A22201D HF LOOP 24 FR .2 WIR E 10 10 10 10 10 058 Olympus A22202C A22202C HF LOOP 26FR .35 WIRE 12 DEG 10 10 10 10 10 059 Olympus A22205D A22205D HF LOOP 24FR .2 WIRE 30 DEG 10 10 10 10 10 060 Olympus A22206C A22206C HF LOOP 26 FR .35 WIRE 30 DEG 10 10 10 10 10 061 Olympus A22231C A22231C HF ANGLED LOOP 24-28FR .35 WIRE 10 10 10 10 10 062 Olympus A22251C A22251C HF ROLLER 24-28FR 12/30DEG 10 10 10 10 10 063 Olympus A22253C A22253C HF NEEDLE 90 DEG 24-28FR 12DEG 10 10 10 10 10 064 Olympus A22255C A22255C HF 45DEG NEEDLE 24-28FR 12/30DEG 10 10 10 10 10 065 Olympus VE-B VE-B VaporTrode 10 10 10 10 10 066 Olympus VE-LG VE-LG VAPORTRODE GROOVED 10 10 10 10 10 067 Olympus VE-S VE-S Spiked VaporTrode 6EA 10 10 10 10 10 068 Olympus VE-F VE-F VAPORTRODE FLUTED BAR 10 10 10 10 10 069 Olympus MLE-24-010 MLE-24-010 CUTTING LOOP 12EA 10 10 10 10 10 070 Olympus MLE-24-012 MLE-24-012 CUTTING LOOP 12EA 10 10 10 10 10 071 Olympus MLE-24-015 MLE-24-015 CUTTING LOOP 12EA 10 10 10 10 10 072 Olympus MLE-26-010 MLE-26-010 CUTTING LOOP 12EA 10 10 10 10 10 073 Olympus MLE-26-012 MLE-26-012 CUTTING LOOP 12EA 10 10 10 10 10 074 Olympus MLE-26-015 MLE-26-015 CUTTING LOOP 12EA 10 10 10 10 10 075 Olympus MLE-28-012 MLE-28-012 CUTTING LOOP 12EA 10 10 10 10 10 076 Olympus MLE-28-015 MLE-28-015 CUTTING LOOP 12EA 10 10 10 10 10 077 Olympus MLES-24-015 MLES-24-015 CUTTING LOOP 12EA 10 10 10 10 10 078 Olympus RE-28 RE-28 ROLLER ELECTRODE 28FR 10 10 10 10 10 079 Olympus BE-208 BE-208 FULG ELECT LONG TIP 105CM 6EA 10 10 10 10 10 080 Olympus BE-202 BE-202 FULGUR ELECT SHORT TIP 105CM 6EA 10 10 10 10 10 081 Olympus KE-24 KE-24 ELITE KNIFE ELECTRODE 6EA 10 10 10 10 10 082 Olympus KE-28 KE-28 KNIFE ELECTRODE 10 10 10 10 10 083 Olympus RAK-26 RAK-26 RIGHT ANGLE KNIFE ELEC 6EA 10 10 10 10 10 084 Olympus RE RE ROLLER BALL 6 EA 10 10 10 10 10 085 Olympus BE-308 BE-308 FULGURATNG ELECT LG TIP 105CM 6EA 10 10 10 10 10 086 Olympus KE-26 KE-26 ELITE KNIVE ELECTRODE 26FR 6EA 10 10 10 10 10 087 Olympus 287 287 Flexible Electrode 10 10 10 10 10 088 Olympus BE-302 BE-302 FULGUR ELECT SHORT TIP 105 CM 6EA 10 10 10 10 10 089 Olympus A3559 A3559 KNIFE SEMI-CIRC FLEX TIP FOR A3550 10 10 10 10 10 090 Olympus RCE-336 RCE-336 RITECUT CUTTING ELECTRODE 10 10 10 10 10 091 Olympus RCE-3115 RCE-3115 RITECUT CUTTING ELECTRODE 10 10 10 10 10 092 Olympus DAC DAC ELITE & USA DISPOSABLE AC TIVE CORD 10 10 10 10 10 093 Olympus A3556 A3556 KNIFE SEMI-CIRC 4FR CHAN FOR A3550 10 10 10 10 10 094 Olympus A3555 A3555 KNIFE LANCET TYPE FOR A3550 10 10 10 10 10 095 Olympus A3557 A3557 KNIFE SERRATED FOR A3550 10 10 10 10 10 096 Olympus A3558 A3558 KNIFE SEMI-CIRCULAR FOR A3550 10 10 10 10 10 097 Olympus WA35057A WA35057A KNIFE SERRATED TYPE FOR A3550 10 10 10 10 10 098 Olympus 00107 00107 BUTTON ELECTRODE 4FR 10 10 10 10 10 099 Olympus 00108 00108 BUTTON ELECTRODE, 5FR 10 10 10 10 10 100 Olympus 00110 00110 BUTTON ELECTRODE, 7FR 10 10 10 10 10 101 Olympus 00111 00111 FLEX BUTTON ELECTRODE 8FR 10 10 10 10 10 102 Olympus A37020A A37020A PED HF ELECT BUTTON 3FR X 280MM 10 10 10 10 10 103 Olympus WA35055A WA35055A KNIFE LANCET CENTERED FOR A3550 10 10 10 10 10 104 Olympus 00109 00109 BUTTON ELECTRODE, 6FR 10 10 10 10 10 105 Olympus A0275 A0275 BUTTON ELECTRODE 9FR 10 10 10 10 10 106 Olympus A37010A A37010A PEDI KNIFE STRT FOR A37014A 10 10 10 10 10 107 Olympus A3753 A3753 LOOP ELECTRODE PEDIATRIC 10 10 10 10 10 108 Olympus A00010A A00010A HF CABLE UNIPOLAR 4M OLYMPUS 10 10 10 10 10 109 Olympus A00012A A00012A HF CABLE UNIPOLAR 4M VALLEYLAB 10 10 10 10 10 110 Olympus A37009A A37009A PEDIATRIC KNIFE HOOK FOR A37014A 10 10 10 10 10 111 Olympus A37011A A37011A PED HF RESECT ELECT FOR A37014A 10 10 10 10 10 112 Olympus A37013A A37013A PED HF ELECTRODE HOOK A37014A 10 10 10 10 10 113 Olympus WA00393S HF cable, monopolar, 4m single use 10 10 10 10 10 114 Olympus 253F6 253F6 FLEX FULG ELECT DOMED TIP 37 CM 10 10 10 10 10 115 Olympus 253F8 253F8 FLEX FULG ELECT SOMED TIP 37 CM 10 10 10 10 10 116 Olympus 256F6 256F6 FLEXIBLE FULG ELECT CON TIP 37CM 10 10 10 10 10 117 Olympus 256F8 256F8 FLEXIBLE FULG ELECT CON TIP 37CM 10 10 10 10 10 118 Olympus 257F6 257F6 FLEX ELECTRODE 10 10 10 10 10 119 Olympus 257F8 257F8 FLEX FULG ELECT BALL TIP 37 CM 10 10 10 10 10 120 Olympus A00011A A00011A HF CABLE UNIPOLAR 4M ERBE/MARTIN 10 10 10 10 10 121 Olympus ET ET TUBING FOR ELLIK/TOOMEY ADAPT 6EA 10 10 10 10 10 122 Olympus RAK-24 RAK-24 RIGHT ANGLE KNIFE ELEC 6EA 10 10 10 10 10 123 Olympus RB RB ROLLER BAR 6EA 10 10 10 10 10 124 Olympus 243 243 Flexible Bugbee Electrode, 37C M 10 10 10 10 10 125 Olympus 245 245 FLEX BALLENGER Follicle ELECT 37CM 10 10 10 10 10 126 Olympus WT630111 WT630111 Suction tube, for smoke evacuation 10 10 10 10 10 127 Olympus HYVV120 OR-VAC Surgical Smoke Evacuator 10 10 10 10 10 128 Olympus MAJ-1939 MAJ-1939 SMOKE EVACUATION FOOT SWITCH 10 10 10 10 10 129 Olympus TD-SB400 TD-SB400 SONICBEAT Transducer 10 10 10 10 10 130 Olympus SB-0520FC SB-0520FC (EN) SET (5PCS) 10 10 10 10 10 131 Olympus SB-0535FC SB-0535FC (EN) SET (5PCS) 10 10 10 10 10 132 Olympus SB-0545FC SB-0545FC (EN) SET (5PCS) 10 10 10 10 10 133 Olympus SB-0545PC SB-0545PC SONICBEAT 45cm, 5mm, pistol 10 10 10 10 10 134 Olympus PS-0523CJDA "POWERSEAL 5MM, 23CM, CURVED JAW SEALER 10 10 10 10 10 135 Olympus PS-0537CJDA "POWERSEAL 5MM, 37CM, CURVED JAW SEALER 10 10 10 10 10 136 Olympus PS-0544CJDA "POWERSEAL 5MM, 44CM, CURVED JAW SEALER 10 10 10 10 10 137 Olympus UHI-4 UHI-4 45L HIGHFLOW INSUFFLATION UNIT 10 10 10 10 10 138 Olympus WA90500US Pneumoliner Containment System 10 10 10 10 10 The Department of Veterans Affairs (VA) is seeking vendors who can provide Olympus ESG-410 Surgical Tissue Management System or equal as listed above which meet all the salient characteristics listed below. Vendors may quote any product solution or configuration so long as they meet the salient characteristics. Products quoted in the technical volume must be captured on the Vendor s pricing volume (Attachment A, Price Cost Schedule) of the solicitation. Vendors may quote any additional ancillary products which they deem to be essential to the functionality of the proposed solution; these items must be captured in the Vendor s pricing volume with a quantity of zero. CLIN s 0001-0005 apply to the following SC s SC # SALIENT CHARACTERISTICS METHOD OF EVALUATION SC Literature Map Olympus ECG-410 ConMed System SC 1 Must be cleared by the U.S. Food and Drug Administration (FDA) Literature Review FDA 510k look up search page 1 FDA 510k look up search page 1 SC 2 Must provide Hybrid Energy, Advanced Bipolar, Ultrasonic Energy, Monopolar and Bipolar, Plasma energy types/modes Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 3 Must provide a centralized color touchscreen user interface that allows the operator to select, monitor, and adjust at minimum: Electrosurgical mode (e.g., monopolar cut, monopolar coag, bipolar); Output power settings (watts); Application-relevant parameters; and Treatment or activation time (timer or activation counters). Literature Review Instruction Manual page 2 System 2450 user manual Page 2-2 SC 4 Must have Contact quality monitoring (CQM) that detect these three types of insufficiencies regarding the neutral electrode. The neutral electrode is detaching from the patient. The neutral electrode is disconnected. Short circuit of the neutral electrode. Literature Review Instruction Manual Page 28 System 2450 user manual Page 2-7 SC 5 Must provide monopolar, bipolar and universal connection Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 6 Must provide both wireless and wired footswitch options Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 7 Must be compatible with smoke evacuation and insufflation systems Literature Review Instruction Manual Page 23 System 2450 user manual Page 2-3 SC 8 Output energy monopolar cut > 300W monopolar coag >200W bipolar cut > 100W (320 saline) bipolar coag > 120W (200 saline) Literature Review ECRI Market Intelligence Report Page 2 ECRI Market Intelligence Report Page 2 SC 9 Must include a minimum one year manufacturer warranty covering parts and labor Literature Review ESG-410 Urology Brochure Page 2 System 2450 user manual Page 2 Design Design features and functions of the offered device will be evaluated for its ability to aid in the performance of its intended function. Areas include but are not limited to the following: Ability to integrate with other Surgical Equipment Probe functions/versatility Customization for various procedures (options) Irrigation options/availability Number and variety of input/outputs connection/ports for peripheral devices Types of procedures supported Performance The Device will be evaluated for its ability to perform its intended function. Areas included but are not limited to: Touch Screen features and ease of use Workflow performance of complete system Types/modes of energy (above and beyond what is in the SCs) Power adjustability Safety The device will be assessed for patient safety features, including, but not limited to, the following areas: Audible tones and visual alarms Contact monitoring data display Quality/Service /Training Training - Availability and options Service - Terms and conditions Warranty Terms and conditions Again, for each product (brand name and part number), the response must include descriptive literature demonstrating the product meets or exceeds the salient characteristics specified above. The Government's intent is to include all ancillary items to ensure the equipment can function as designed by the Original Equipment Manufacturer (OEM) and as clinically required. Vendors are encouraged to provide any product solution or configuration so long as they meet the salient characteristics. Additionally, responses can include any additional product that may be beneficial. These items must be clearly identified by brand name and part number. Responses to this Sources Sought Notice shall include the following: Does vendor offer an annual service plan, Yes or No? If Yes: What does the plan cover? Does plan cover software updates only? Does the plan cover parts repair or replacement only? Does the plan cover both software and parts? Vendors are requested to provide documentation that shows information on their service plan. Is the service provided by the OEM or a subcontractor? Full name and address of company DUNS number/ CAGE Code/ SAM UIE Business Size Manufacturer or Distributor: If distributor - provide full name, business size and address of manufacturer. Country of Origin designation for all products Ability to provide uninterrupted supply of products on a national scale. Technical Literature that clearly shows product(s) meets the identified salient characteristics and page numbers where each salient characteristic is met. Any additional product solution or configuration that would be beneficial to the clinical functionality of the product line identified. Authorized Distributor Letter Certified by OEM with a current date. Although not required, vendors responding to this Sources Sought may also submit a Capabilities Statement. | 74% | Market Research | 04/06/2026 |
This Sources Sought Notice is for the Fredericksburg HCC to determine sources for a comprehensive package of brand name or equal Aesculap Stainless-Steel Surgical Instruments to support a wide range of surgical specialties at the Fredericksburg VA Health Care Center. The instruments consists of Surgical Instrument Containers with Lids, Baskets for Surgical Instruments inside containers with lids, Silicone Mats/Cushioning Pads for Surgical Instruments placed in the containers with lids, Snap On ID Tags for inside Surgical Instrument Containers, Identification Labels to be etched with Tray Names for the Surgical Instrument and Containers, and Instrument Stringers. This is a SOURCES SOUGHT announcement only. The purpose of this notice is to conduct market research and obtain information from qualified businesses. This is not a request for bids, quotes, or proposals. All responsible sources must submit a capability statement addressing their capabilities, capacity, place of manufacture, and location which shall be considered by the agency. Â This notice shall not be construed as a commitment by the Government to ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. All information submitted in response to this announcement is voluntary; the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. Â Interested parties submitting a response to this inquiry must include the following information: Capability statement Name and address of company NAICS Code SAM.gov UEI number Business size (large or small) Place of manufacture Identify applicable socioeconomic categories (SDVOSB/VOSB etc.) any pertinent information which demonstrates the firm s ability to meet the above requirement An authorized distributor letter if the interested party is not the manufacturer Identify all the products on any schedule and provide the contract number. Identify open market products All responses shall be submitted no later than Monday, 10/24/2026, by 10:00 AM EST. Responses shall be emailed to: Tiara.White@va.gov. When replying, please include Sources Sought 36C24626Q0993 to ensure the email is reviewed in a timely manner. | 74% | Market Research | 10/21/2026 |
Additional Details
Solicitation Number
36C26226Q0869
Archive Date
Jul 4, 2026
Office Address
Gilbert, AZ, 85297