GovChime
Notice ID: 94243efbf40649b79f43b076f8e2b6e8Award NoticeAwardedArchived

6515--Mobile UV Disinfection Device

Awarded on September 17, 2026. The description is published on SAM.gov: Full description on SAM.gov.

Awarded tounder 36C26226P1742 (source: SAM.gov award notice)• $371.0K

Overview

Posted
September 18, 2026
Notice type
Award Notice
Set-aside
Small Business Set Aside - Total
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of Veterans Affairs

Notice details

Office
262-NETWORK CONTRACT OFFICE 22 (36C262)
Place of performance
Long Beach, California, 90822
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov
Award date
Sep 17, 2026
Award amount (SAM.gov award notice)
$371.0K

Identifiers

Solicitation number
36C26226Q1445
Notice ID
94243efbf40649b79f43b076f8e2b6e8
Award number (PIID)
36C26226P1742

Description

No description in the SAM.gov data feed for this notice.

Full description on SAM.gov

Award Overview

Award Number

36C26226P1742

Award Amount (SAM.gov award notice)

$371.0K

Award Date

Sep 17, 2026

Awardee

Awardee UEI

SKLJHJWJK2D4

Awardee CAGE Code

7AW03

Awardee Address

WAUKESHA, WI 53188, WI

Original Solicitation

Notice ID: 94243efbf40649b79f43b076f8e2b6e8

Posted Date: Sep 18, 2026

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

3
  • 36C26227C0024
    SURFACIDE, LLC
    Department of Veterans AffairsNAICS 339113
    $39.0KSigned Oct 12, 2026
  • 36C24826P1080
    SURFACIDE, LLC
    Department of Veterans AffairsNAICS 339113
    $350.0KSigned Jul 23, 2026
  • 36C24426P0379
    SURFACIDE, LLC
    Department of Veterans AffairsNAICS 339113
    $345.0KSigned Jun 30, 2026

Contacts

Contracting Officer

Primary Contact

Hestia Sim
Contracting Officer

Documents

Files (1)

  • 36C26226P1742_1.docx

    13 KBAdded in Award Notice version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Award NoticeArchivedCurrent

    6515--Mobile UV Disinfection Device

    Notice 94243efbf40649b79f43b076f8e2b6e8 on SAM.gov

Other notices for this solicitation

  1. Combined SynopsisRelated noticeSep 3, 2026

    6515--Mobile UV Disinfection Device

    Notice ee44d6bd02ee4dd388b47a4bfc6de70e on SAM.gov

  2. Combined SynopsisRelated noticeSep 11, 2026

    6515--Mobile UV Disinfection Device

    Notice 84b17ad53ddc46ceb586431818c906ab on SAM.gov

  3. Combined SynopsisRelated noticeSep 14, 2026

    6515--Mobile UV Disinfection Device

    Notice 60360e6bffb24ac9950307c5d24e51c0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 3 of 3 Page 1 of Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 3 Page 1 of 1 1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Omnicell Pharmacy 1.B. Project Location: VA Long Beach Healthcare System 5901 East 7th Street, Long Beach, CA 90822 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26227Q0078. 1.D. Set Aside: This solicitation is Unrestricted Open Market 1.E. Applicable NAICS code: 339113, Surgical Appliances and Supplies Manufacturing 1.F. Small Business Size Standard: 1000 Employees 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 365 days from award of date 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to victor.oliveros@va.gov no later than 12:00 Pacific Local Time, November 11, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, November 17, 2026, to victor.oliveros@va.gov . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items
-Combined Synopsis11/17/2026
Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 3 of 3 Page 1 of Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 3 Page 1 of 1 1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Omnicell Pharmacy 1.B. Project Location: VA Long Beach Healthcare System 5901 East 7th Street, Long Beach, CA 90822 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26227Q0078. 1.D. Set Aside: This solicitation is Unrestricted Open Market 1.E. Applicable NAICS code: 339113, Surgical Appliances and Supplies Manufacturing 1.F. Small Business Size Standard: 1000 Employees 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 365 days from award of date 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to victor.oliveros@va.gov no later than 12:00 Pacific Local Time, November 11, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, November 17, 2026, to victor.oliveros@va.gov . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items
-Combined Synopsis11/17/2026
Page 2 of 2 Please see below for answers to questions received regarding solicitation 36C26226Q1325. All other terms and conditions remain unchanged. Clarification of the correct proposal/solicitation response due date Responses are due Friday, September 11, 2026. Clarification and reconciliation of the Period of Performance and initial delivery schedule The period of performance will be for one year Due to the complexity and customization of this product, custom surgical packs shall take no more than 24 weeks to produce, sterilize, and deliver for the initial order after commencement of the forthcoming contract. Confirmation of whether any option periods are identified for this requirement There are no option periods for this requirement. Review and reconsideration of the standard delivery timeline, consistent with industry standard of 2 3 days Pack deliveries shall be made two business days after receipt of an order if placed before 1:00 p.m. PST, and within three (3) calendar days for orders placed after 1:00 p.mAre the two and three days the amount of days they have to ship the items, or the items have to be delivered? The comment was correct that requirement as almost impossible for non-local vendors to meet. They must get adequate processing time for each order. GLA will have to be responsible and take process and shipping times into consideration when placing orders. Keeping it this way greatly reduces competition. . Orders shall be delivered no more than three (3) business days. Consideration of a purchasing commitment of at least 60 days in connection with the three-month inventory requirement The contractor must maintain at least three (3) months completely assembled custom packs onpacks on hand at all times, The government will make no purchasing commitments above the minimum dollar threshold identified in the requirements contract. Clarification or reconsideration of the monthly-in-arrears invoicing structure Per government regulations payment is due 30 days after the latter of receiving a proper invoice or government acceptance of the items. Billing monthly ensures a streamlined and consistent process for managing payments .payments. Inclusion of FAR 52.225-1, Buy American Supplies, consistent with the stated Buy American Act evaluation factor See pages 3-6 for inclusion of FAR 52.225-1, Buy American Supplies and FAR 52.225-2, Buy American Certificate. Additionally, Factor 2 of the Evaluation Factors on page 41 of the RFQ now reads: ii. Factor 2 The Offeror shall identify the percentage of items within the proposed custom surgical and non surgical packs that are manufactured in the United States. The Offeror shall also identify the percentage of items manufactured in each foreign country, clearly listing the countries of origin and the proportion of total components sourced from each location. The Offeror must ensure the percentages provided are accurate and reflect the total composition of each pack. In addition, the Offeror shall complete and submit the Buy American Certificate and Made in America Certificate PPE included in this solicitation. Removal or clarification of the Non-Manufacturer Rule Compliance evaluation factor in light of the standing waiver Per VA regulation, a certification is still required for SDVOSB/VOSB set asides. Evaluation factor #3 will remain in the solicitation unchanged. Clarification on Make PPE in America Act applicability to sterile surgical gowns A waiver for all non-domestic items relevant to this acquisition is under review. Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (Oct 2022). As prescribed in 25.1101 (a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): The cost of its components mined, produced, or manufactured in the United States exceeds 65%  percent of the cost of all its components. (End of clause) 52.225-2 Buy American Certificate As prescribed in 25.1101(a)(2), insert the following provision: Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b)Foreign End Products: Line Item No. Country of Origin Exceeds 65% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) 852.225-70 MADE IN AMERICA-PPE ([MAY 2026]) (DEVIATION) (a) Definitions. As used in this clause Component, as applied to an item described in subsection (b) of this clause, means an article, material, or supply incorporated directly into PPE. Domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE, including the materials and components thereof, that is grown, reprocessed, reused, or produced in the United States. Foreign-made domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE that is assembled outside the United States containing only materials and components that are grown, reprocessed, reused, or produced in the United States. Foreign PPE means PPE other than domestic PPE or foreign-made domestic PPE. PPE, as applied to an item described in subsection (b) of this clause, means surgical masks, respirator masks and powered air purifying respirators and required filters, face shields and protective eyewear, gloves, disposable and reusable surgical and isolation gowns, head and foot coverings, and other gear or clothing used to protect an individual from the transmission of disease. United States, as applied to an item described in subsection (b) of this clause, means the 50 States, the District of Columbia, and the possessions of the United States. (b) The Contractor must deliver only domestic PPE, unless it specified delivery of foreign-made domestic or foreign PPE in the provision of the solicitation entitled Made in America Certificate PPE". (c) The Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (End of clause) 852.225-71 MADE IN AMERICA CERTIFICATE PPE (MAY 2026) (DEVIATION) (a)(1) The Offeror certifies that each item of PPE is either domestic, foreign made domestic, or foreign. (2) The terms domestic PPE, foreign-made domestic PPE, foreign PPE, and PPE, are defined in the clause of this solicitation entitled Made in America PPE . (3) The Offeror understands that the Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (b) The Offeror must list all offered PPE in the table and indicate the category of PPE (domestic, foreign-made domestic, or foreign). Line Item No. Country of Origin Domestic PPE, Foreign-made PPE, Foreign PPE ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (c) In the event the Department of Veterans Affairs determines both domestic personal protective equipment and foreign-made domestic personal protective equipment are not available due to nonavailability or unreasonable cost, the Contractor shall comply with the clauses at Federal Acquisition Regulation (FAR) 52.225-1 Buy American Supplies or 52.225-3 Buy American Free Trade Agreements Israeli Trade Act and the provisions at FAR 52.225-2 Buy American Certificate or 52.225-4 Buy American Free Trade Agreements Israeli Trade Act Certificate or the clause at FAR 52.225-5 Trade Agreements and the provision at FAR 52.225-6 Trade Agreements Certificate, as identified in the solicitation. (End of provision)]
-Combined Synopsis09/11/2026
Surgical implants were purchased from Mandatory SAC Contract #36C10G24D0041, which Howmedica Osteonics Corp currently holdsThis procurement for Implant Supplies falls under statutory Authority Title 38, U.S.C. 8123 per VHA Directive 1081.1 as per physician order in accordance with VAAR 808.002.
-AwardedOpen
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES. DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339113, Surgical Appliances and Supplies Manufacturing (size standard of 1,000 employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs Network Contracting Office 22 is seeking a contractor to provide Air Innovations SSC4500DX Sterile Storage Cabinets and Installation for the Greater Los Angeles VAMC, Los Angeles, CA. The prospective contractor must be able to provide supplies that meet or exceed the following requirements: STERILE STORAGE CABINET SALIENT CHARACTERISTICS The Sterile Storage Cabinets must have UV-C light is located above the HEPA filter and floods the filter with intense UV-C rays, which will sterilize airborne viruses and bacteria on the HEPA filter. The Sterile Storage Cabinets must allow user(s) to remotely monitor the temperature, humidity, and pressure of the Sterile Storage Cabinet from another room through 0-10 VDC signal. The Sterile Storage Cabinets must exceed requirements of VA Directive 1116(2); ANSI/AAMI ST79-2006; ANSI/ASHRAE/ASHE Standard 170-2017. The Sterile Storage Cabinets must conform with UL60601-1. The Sterile Storage Cabinets must be able to maintain 66°F to 72°F Temperature. The Sterile Storage Cabinets must maintain Humidity at 20% to 60% RH. The Sterile Storage Cabinets must have steam humidification utilizing standard demineralized water. The Sterile Storage Cabinets must maintain positive pressure of +0.03 WC. The Sterile Storage Cabinets must meet IEC 60601-1, Medical Standard for Power Supplies. The Sterile Storage Cabinets must have 120V hospital grade plug-in-cord. The Sterile Storage Cabinets must have cleanable 304 stainless steel payload construction with cleanable white powder coated. The Sterile Storage Cabinets must have HEPA Filtration designed to exceed ISO 6 Cleanliness. The Sterile Storage Cabinets must have ducted heat exhaust and must come with exhaust connection kit/parts to allow venting though a ceiling tile and waste heat from the cabinet can be discharged to the large spaces above the ceiling. The Sterile Storage Cabinets must have 230 air changes per hour or better. The Sterile Storage Cabinets must sterilize airborne viruses and bacteria on the HEPA filter through intense UV-C rays. The Sterile Storage Cabinets must have integrated condensate control system. The Sterile Storage Cabinets must be capable to interface with VA network environmental monitoring system via an access port. ITEM INFO LINE ITEM DESCRIPTION Part# QTY 0001 Air Innovations Sterile Storage SSC4500DX 41 0002 UV-C light (Bathes HEPA filter) 99C0177-00 SSCUV 41 0003 Air Innovations Ceiling heat rejection Package SSCHR24 41 0004 Installation: Includes uncrating and moving to designated location SSC4000-OSAI 41 0005 Dock to Dock/Freight Must be included in product pricing - PERIOD OF PERFORMANCE The anticipated period of performance will be for six weeks starting on the date of award. The period of performance will end after all units have been installed and training has been completed. DELIVERY (Multiple Locations) Delivery will be coordinated with GLA Warehouse Bldg. 297 on the delivery date and time with the selected vendor. Vendor shall deliver materials to job in manufacturer's original sealed containers with brand name marked thereon. Vendor shall package to prevent damage or deterioration during shipment, handling, and storage. All delayed delivery arrangements, within 60 days, shall be at no additional cost to the Government. Locations: GLA Building 297 Warehouse, 11301 Wilshire Blvd., Los Angeles, CA 90073 Liftgate is required for all location along with two step ladders and a skinny (narrow) pallet jack. INSTALLATION This equipment requires installation and will be delivered to each location and installed by the vendor. The RMD Coordinators will accompany the vendor to the location to ensure proper installation and to answer any questions. The installation process will take approximately 12 to 24-hours per cabinets to properly acclimate to the installation area. Installation should be completed after delivery to each location listed below: WARRANTY All equipment shall be covered under standard one (1) year warranty from the first day of delivery. TRAINING Training will be provided by the technician after the cabinets have been installed, inspected, and tested at the final destination. The training will be performed the next day after all requirements have been met for use of the cabinets. The vendor will coordinate with the RMD Coordinators (14.2) as the point of contacts for training. ANNUAL PREVENTIVE MAINTENANCE The vendor will provide a one (1) year of Preventive Maintenance (PM) for factory authorized Annual PM contract for (4) SSC cabinets to include all parts listed below, labor, transportation, and lodging. After the initial PM contract that is being provided, a new PM contract will be submitted to contracting for base and option years. The initial PM contract that is include in the order will end a year after the equipment has been received and installed. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement. (Example: Requirement #1, Meet, Description/Explanation). Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. Is your company considered small under the NAICS code identified in this RFI? Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? Please indicate whether your product conforms to the requirements of the Buy American Act. Please indicate and provide the proof of country of origin. What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. What is estimated life span of your solution? What support/services does that entail? Does your organization offer a leasing solution? Please elaborate. Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to victor.oliveros@va.gov. Telephone responses will not be accepted. Responses must be received no later than November 9, 2025 by 15:00 PST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research11/09/2026

Additional Details

Solicitation Number

36C26226Q1445

Archive Date

Oct 18, 2026

Office Address

Gilbert, AZ, 85297