GovChime
Notice ID: 3902ab60d1c84dcbb436ad727ebb2d21Sources SoughtArchived

Replacement of the Tropical Wind Tunnels Wind Fan Motor and Bypass Fan Motor

Archived on August 20, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:30 PM EDT
Posted
July 31, 2026
Notice type
Sources Sought
Set-aside
Small Business Set Aside - Total
NAICS
333413: Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
W6QK ACC-APG NATICK
Place of performance
Natick
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
3902ab60d1c84dcbb436ad727ebb2d21

Description

Sources Sought Notice Department of the Army U.S. Army DEVCOM Soldier Center Tropical Wind Tunnel Wind Fan and Bypass Fan System Modernization THIS IS NOT A SOLICITATION OR REQUEST FOR PROPOSALS Notice Type Sources Sought Notice PSC H342 – Quality Control, Test, Inspection, and Technical Representative Services-Machinery and Equipment NAICS 333413 – Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing 1. Introduction The U.S. Army Combat Capabilities Development Command (DEVCOM) Soldier Center is conducting market research in accordance with FAR Part 10 to identify qualified businesses capable of engineering, designing, manufacturing, integrating, removing, installing, testing, commissioning, and training personnel on a modernized Tropical Wind Tunnel Wind Fan Motor and Bypass Fan System at Building 2, Natick Soldier Systems Center. This notice is for market research only and is not a solicitation. 2. Purpose Determine industry capability, assess small business participation, and support acquisition planning. 3. Project Description The project includes engineering analysis of the existing wind tunnel and bypass fan systems, evaluation of reusable components, modernization of motors and drives, VFD integration, alignment, balancing, testing, commissioning, preventive maintenance documentation, and operator training. 4. Anticipated Scope Engineering evaluation; electrical and mechanical design; motor sizing; fan performance analysis; direct-drive or gearbox replacement; VFD integration; removal and installation; testing; commissioning; as-built drawings; training. 5. Desired Performance Maintain approximately 40 MPH wind speed with an alternate design capable of approximately 65 MPH while improving reliability, maintainability, efficiency, and lifecycle cost. 6. Contractor Capabilities Experience with industrial fan systems, wind tunnels, rotating equipment, industrial controls, VFDs, balancing, commissioning, and DoD or industrial research facilities. 7. Period of Performance Anticipated completion no later than 31 December 2026. 8. Security/Safety Capability to comply with Army installation access, EM 385-1-1, OSHA, NFPA, Lockout/Tagout, confined space, and applicable environmental requirements. 9. Requested Information Provide company information, UEI, CAGE, socioeconomic status, capability statement (15 pages max), relevant projects, engineering capabilities, manufacturing facilities, quality certifications, and points of contact. 10. Questions for Industry Comment on the suitability of NAICS 333413 and PSC H342, recommended technical approach, manufacturing lead times, and commercial technologies. 11. Disclaimer Issued solely for market research under FAR Part 10. No contract will be awarded from this notice and no costs incurred in responding will be reimbursed.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 4
    Version 4Sources SoughtArchivedCurrent

    Replacement of the Tropical Wind Tunnels Wind Fan Motor and Bypass Fan Motor

    Notice 3902ab60d1c84dcbb436ad727ebb2d21 on SAM.gov

  2. 6
    Version 6Combined Synopsis/SolicitationArchived

    Type changed from Sources Sought to Combined Synopsis/Solicitation

    Replacement of Tropical Wind Tunnels Wind Fan Motor and Bypass Fan Motor

    Notice 3a9589c325044356ab6f4af23f9d4892 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Drum Fan Reason for amendment was to update salient characteristics to 4 blades. aluminum or polyethylene 2 speeds. 8 inch wheels or higher for easy transport 120 Volts Belt drive motor CFM 12,800 or higher OSHA Compliant 2 speed toggle or rotary switch coated steel or polyethylene housing Color: Black is preferred
49%
Combined Synopsis07/14/2026
Portable Misting Cooler, 65600 PB4MAX Portable misting coolers QTY 10
47%
Combined Synopsis08/03/2026
Sources Sought Notice DESCRIPTION OF INTENT This is a SOURCES SOUGHT NOTICE/MARKET RESEARCH SURVEY to request information for Government planning purposes only. The Army Contracting Command – Detroit Arsenal (ACC-DTA) is seeking to gain knowledge of interest, capabilities and qualifications of various members of the community, to include both small and large businesses, for production of the item identified below. Responses to this Sources Sought Notice/Market Research Survey will assist ACC-DTA in planning its acquisition strategy for a potential future acquisition. NOUN: Vaneaxial Fan Assembly NSN: 4140-01-284-5722 PART NO.: 12268231 ESTIMATED QUANTITY YEAR 1: 381 EA YEAR 2: 103 EA YEAR 3: 102 EA END ITEM: Howitzer, Full Tracked, Self-Propelled 155MM M109 TECHNICAL DATA PACKAGE There is a Technical Data Package (TDP) associated with this procurement. It is distribution code D which limits access to Department of Defense (DoD) and U.S. DoD contractors only. The TDP will be made available to contractors when a sources sought is released and if/when a solicitation is released. To be eligible to gain access to the TDP, the vendor must have a current DD 2345, Militarily Critical Technical Data Agreement certification on file with the Defense Logistics Information Service (DLIS). If the vendor has a current certification, they are required to submit a request to access the TDP in SAM.gov. Access will be granted, pending verification of the contractor’s active registration in Joint Certification Program (JCP). Upon completion of the purposes for which Government Technical Data has been provided, the offeror, and all subcontractors, vendors, and sub-vendors of the offeror, are required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed. Destruction of this technical data shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files. FIRST ARTICLE TESTING: Yes NOTE: All survey input is voluntary, and no compensation will be made for your firm’s participation. Since this is a Sources Sought Notice, and not a solicitation for receipt of proposals or quotations, the Government does not encourage questions concerning this market research. Furthermore, the Government is not obligated to issue a solicitation or award a contract as a result of this announcement. INSTRUCTIONS FOR COMPLETING THE SURVEY You may respond in total, or in part, to this survey. However, all responses must be received no later than 02 November 2026. All completed surveys shall be sent via e-mail to: Kaitlyn Fruhner Contract Specialist, ACC-DTA E-mail: kaitlyn.n.fruhner.civ@army.mil Subject Line: Sources Sought, W912CH-27-R-A025 Relevant sales media and product manuals may be included as attachments with your submission. Please clearly mark all proprietary information. The front page of your response package should state "PROPIETARY INFORMATION CONTAINED WITHIN" (all caps), if applicable. Also, please provide a release statement indicating that the proprietary information may be distributed to Army personnel involved with this survey. CONFIDENTIAL INFORMATION & LABELING The Government acknowledges its obligations under 18 USC §1905 to protect information qualifying as confidential. Pursuant to this statute, the Government is willing to accept any trade secret or confidential restrictions placed on qualifying data forwarded in response to the survey questions, and to protect it from unauthorized disclosure subject to the following: Clearly and conspicuously mark qualifying data as trade secret or confidential with the restrictive legend “CONFIDENTIAL” (all caps), including any explanatory text, so that the Government is clearly notified of what data needs to be protected. In marking such data, please take care to mark only those portions of the data or materials that are truly trade secret or confidential (overbreadth in marking inappropriate data as “CONFIDENTIAL” may diminish or eliminate the usefulness of your response). Use circling, underscoring, highlighting, or any other appropriate means to indicate those portions of a single page that need to be protected. The Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the Government will not be protected once in the public domain. Data already in the Government’s possession will be protected in accordance with the Government’s data rights. Confidential data transmitted electronically, whether by physical media or not, whether by the respondent or by the Government, shall contain any restrictive legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for portions only of an electronic file, use the restrictive legends “CONFIDENTIAL DATA BEGINS:” and “CONFIDENTIAL PORTION ENDS”. In any reproductions of technical data or any portions thereof subject to asserted restrictions, the Government shall also reproduce the asserted restriction legend and any explanatory text. The Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain confidential information may receive only limited or no consideration since the respondent’s marking of data as “CONFIDENTIAL” will preclude disclosure of same outside the Government, and therefore will preclude disclosure to support contractors assisting with the evaluation effort. QUESTIONNAIRE / SURVEY Vendor Profile. Please complete the yellow-highlighted fields below: COMPANY NAME: MAILING ADDRESS: CAGE CODE: POC NAME / TITLE: PHONE NUMBER: E-MAIL ADDRESS: WEBSITE: Business type for NAICS 333413 (Please check all that apply.) 8(a) Small Disadvantaged HUBZone Women-owned Large Business None of the Above. Please Explain: ________________ _______________________ Service-disabled Veteran-owned Small Business *If claiming small business status, the information must be verifiable in SAM.gov Please indicate if the NAICS code selected is appropriate, if not, please explain why. Nonmanufacturer Rule. To qualify as a small business concern for set-aside or sole source supply contracts, a small business must meet at least one of the qualifications listed below. Please indicate which qualification, if any, applies to your firm: Manufacture the product itself; or Supply a product manufactured by another small business if it is a nonmanufacturer; or Supply the product of any sized manufacturer if the Small Business Administration has granted a waiver to the nonmanufacturer rule. A current DD 2345, Military Critical Technical Data Agreement, must be on file with the Defense Logistics Information Service (DLIS) to access and view the TDP associated with this procurement. Does your firm have a current DD 2345 on file with DLIS? Yes No Approval Pending. Application submitted on: [MM/DD/YYYY] Requirement-specific Information. Please complete the questions below: (These are general questions. Please add or remove as applicable to your buy.) NOUN: Vaneaxial Fan Assembly NSN: 4140-01-284-5722 PART NO. : 12268231 Has your firm manufactured this item for a U.S. Government agency in the past? If so, please list the contract number(s) and agency(s). Is your firm currently capable of manufacturing this item? Statements of your firm’s expertise should include reference to relevant contracts performed (including a description of the scope, quantity manufactured, and point of contact with phone number). If your firm was awarded a contract for this item, where would production take place? Does your firm have experience with first article testing (FAT)? If so, please provide a brief summary of the experience. What is your firm’s production lead time for this item after receipt of award? (Please respond in number of calendar days.) What is your firm’s minimum, normal and maximum sustainable monthly production rates for this item? What is your firm’s current price per unit for this item? Please identify your firm’s current quality management system. Also, is your firm independently certified in that system? Please provide a summary of the item’s commercial availability. Is there any other pertinent information that your firm would like to disclose? If so, please list below and/or include as a Microsoft Word (.doc or .docx) or Adobe Acrobat (.pdf) attachment with your submission.
43%
Market Research11/02/2026
Flanders HEPA Filter
42%
Combined Synopsis09/12/2026
Amendment 0002. Need to add: must include Puget Sound Clean Air Agency notice of construction permit. Because of this, extending the solicitation for a week. Amended to add set aside code. Shaker filter / baghouse style dust collection system capable of allowing multiple high-demand machines (belt sanders, CNC routers, planers, saws) to run simultaneously without starving the system of static pressure and provide 99.9% pure air return into facility. Must be able to retrofit into ductwork from a 2006 Murphy-Adams Shaker Style dust collection system (model MRSE-20-6D) for a 5,000 square foot facility. Installation, electrical components, and air compression (as needed) requested for inclusion in the total cost. CFM requirements based on attached ductwork schematic. Must meet federal and Washington State environmental requirements. Delivery and installation required.
42%
Combined Synopsis09/07/2026

Additional Details

Solicitation Number

W911QY-26-R-Tropical_Wind_Tunnels

Archive Date

Aug 20, 2026

Office Address

NATICK, MA, 01760-5011