GovChime
Notice ID: fa59c8d3be7b4ea98fb6372bc9f99cccSources Sought

REQUEST FOR INFORMATION (RFI) FOR GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
3:00 PM EST
Posted
October 23, 2026
Notice type
Sources Sought
NAICS
334220: Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAIR.NAVAIR HQS.NAVAL AIR SYSTEMS COMMAND
Place of performance
0, Maryland, 20670
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
fa59c8d3be7b4ea98fb6372bc9f99ccc

Description

DISCLAIMER 

THIS REQUEST FOR INFORMATION (RFI) IS FOR INFORMATIONAL AND PLANNING PURPOSES ONLY. IT IS A MARKET RESEARCH TOOL BEING USED IN ACCORDANCE WITH FEDERAL ACQUISITION REGULATION (FAR) PART 10 TO IDENTIFY FIRMS POTENTIALLY CAPABLE OF PROVIDING THE CAPABILITIES DESCRIBED HEREIN AND TO INFORM POTENTIAL FUTURE ACQUISITION PLANNING. 

THIS RFI IS NOT A REQUEST FOR PROPOSAL, INVITATION FOR BID, REQUEST FOR QUOTATION, SOLICITATION, OR COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND CANNOT BE ACCEPTED BY THE GOVERNMENT TO FORM A BINDING CONTRACT. THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT OR ISSUE A FUTURE SOLICITATION AS A RESULT OF THIS RFI. 

ANY QUANTITIES OR DELIVERY SCENARIOS REFERENCED IN THIS RFI ARE PROVIDED SOLELY TO SUPPORT MARKET RESEARCH AND CAPACITY PLANNING AND DO NOT CONSTITUTE A GOVERNMENT REQUIREMENT, ACQUISITION FORECAST, MINIMUM OR MAXIMUM PURCHASE QUANTITY, OR COMMITMENT TO PROCURE ANY QUANTITY. 

RESPONSE TO THIS RFI IS STRICTLY VOLUNTARY. THE GOVERNMENT WILL NOT REIMBURSE RESPONDENTS FOR ANY COSTS ASSOCIATED WITH PREPARING OR SUBMITTING A RESPONSE, PROVIDING SUPPORTING INFORMATION, PARTICIPATING IN FOLLOW-UP DISCUSSIONS, OR PARTICIPATING IN ANY SUBSEQUENT MARKET RESEARCH ACTIVITY. INFORMATION SUBMITTED IN RESPONSE TO THIS RFI WILL NOT BE RETURNED. 

FAILURE TO RESPOND TO THIS RFI WILL NOT PRECLUDE A COMPANY FROM PARTICIPATING IN ANY FUTURE MARKET RESEARCH EFFORT, TECHNICAL DEMONSTRATION, OR COMPETITIVE ACQUISITION RELATED TO GROUP 1 AND GROUP 2 UAS TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS. THE GOVERNMENT IS NOT OBLIGATED TO PROVIDE FEEDBACK OR COMMENTS REGARDING ANY RESPONSE. NO TELEPHONE RESPONSES WILL BE ACCEPTED. 

INTRODUCTION 

The Aircraft Project Management Office (AIR PMO), under the Direct Reporting Portfolio Manager Robotic Autonomous Systems (DRPM RAS), is conducting market research regarding commercially available and emerging Group 1 and Group 2 Unmanned Aircraft System (UAS) Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. 

For market research and planning purposes, the Government is seeking information regarding industry’s ability to provide and support these capabilities at scale. Potential future demand could involve thousands of training devices, simulator stations, software licenses, or equivalent deployed units. However, no procurement quantity, acquisition strategy, or requirement has been established, and any quantities referenced in this RFI are illustrative planning assumptions only. 

The Government requests white papers from interested parties with commercially available or emerging capabilities. Responses will assist the Government in identifying potential solutions; understanding technical approaches, system maturity, interoperability, scalability, implementation considerations, and business models; refining capability objectives and potential requirements; and informing acquisition planning and potential procurement strategies. 

This RFI follows the Air PMO virtual Industry Day conducted on 03 September 2026. Participation in the Industry Day is not a prerequisite for responding to this RFI. Interested parties may respond regardless of whether they attended the event. 

This RFI is an independent Air PMO market research effort and is not associated with or conducted in support of the Drone Dominance Program. Respondents should address the capability areas and information requested in this RFI without assuming any relationship to that program’s requirements, acquisition approach, funding, schedule, or procurement quantities. 

BACKGROUND 

Simulation-based training has the potential to enhance operator proficiency, improve training availability, increase training throughput, reduce operational risk, and provide realistic Mission Planning and Mission Rehearsal capabilities for Group 1 and Group 2 UAS. These capabilities may enable operators to safely practice in realistic and challenging operational and threat environments, emergency procedures, and degraded system behaviors that may be impractical, unsafe, or cost-prohibitive to execute using live aircraft. 

Simulation-based training may also reduce operational impacts associated with range availability, airspace restrictions, spectrum congestion, weather delays, aircraft maintenance requirements, and logistical constraints while supporting standardized, repeatable, and scalable training across multiple UAS platforms. The Government seeks to understand current industry capabilities, technology maturity, innovative approaches, best practices, and limitations relevant to these objectives. 

MARKET RESEARCH PROCESS 

This RFI represents the white-paper phase of Air PMO's market research effort. The Government may use information received to support capability development, requirements refinement, acquisition planning, evaluation of commercially available and emerging solutions, and potential procurement strategies. 

Following review of submitted white papers, the Government may invite selected respondents to participate in follow-up discussions or technical demonstrations to further assess the maturity, suitability, and applicability of proposed solutions. Selection for, or participation in, a follow-up activity does not constitute a competitive range determination, source-selection decision, commitment to procure, or preference for any future acquisition. Any invitation and associated instructions will be issued separately. The Government may elect not to conduct follow-up activities and is not obligated to provide feedback to respondents. 

INFORMATION REQUESTED 

Respondents should provide a concise white paper describing how their solution addresses the capability areas in this RFI. Responses should identify current capabilities separately from planned, developmental, or partner-provided capabilities. At a minimum, the white paper should address the following: 

  • Company profile, business size and socioeconomic status, Commercial and Government Entity (CAGE) code, Unique Entity Identifier (UEI), and primary point(s) of contact. 

  • Executive summary of the proposed solution and the operational or training problem it addresses. 

  • Description of the complete solution, including software, hardware, peripherals, hosting or deployment model, licensing, and any Government-furnished equipment or services required. 

  • A capability cross-reference identifying each applicable Capability Area of Interest as currently available, configurable, developmental, not available, or provided by a third party. For developmental capabilities, identify the anticipated availability date and key dependencies. 

  • Supported Group 1 and Group 2 UAS platforms, flight models, ground control stations, hand controllers, payloads, mission-planning tools, and training environments, including the approach and estimated effort to add new aircraft or configurations. 

  • Technical maturity and commercial availability, including Technology Readiness Level or equivalent maturity evidence, operational use, customer base, relevant contracts, and available test or performance data. 

  • System architecture, interfaces, data formats, application programming interfaces, standards, modularity, and approach to integration with Government or third-party systems. 

  • Training-management, instructor, evaluation, after-action review, records-management, and qualification-management functionality. 

  • Cybersecurity, identity and access management, data protection, software-update, cloud or on-premises deployment, and authority-to-operate status or experience, as applicable. 

  • NDAA and supply-chain compliance status, including identification of any noncompliant components, planned remediation, dependencies, or assumptions. 

  • Implementation approach, schedule, lead times, training and support model, sustainment, warranties, upgrades, and product roadmap. 

  • Production, licensing, integration, deployment, and delivery capacity, as applicable to the proposed solution. Identify the unit of measure or configuration used to describe capacity; current sustainable monthly capacity; the number of complete and operational units that could be delivered or deployed within the first 30 calendar days after receipt of an order; and the estimated time required to deliver or deploy a cumulative quantity of 2,000 units. If the respondent cannot currently support that quantity, describe the time, resources, facilities, workforce, suppliers, capital investment, Government actions, or other conditions required to achieve and sustain the necessary capacity. For solutions not delivered as individual hardware devices, provide equivalent information using the most appropriate unit of measure, such as simulator stations, training seats, software licenses, concurrent users, sites, or enterprise deployments. 

  • Rough-order-of-magnitude pricing or commercial pricing structure, including major cost drivers, licensing basis, nonrecurring integration costs, and relevant quantity or enterprise pricing assumptions. Pricing is requested solely for market research and is not a proposal or binding offer. 

  • Known limitations, risks, dependencies, and recommended Government actions or information needed to support implementation. 

  • Readiness and recommended scope for a potential technical demonstration, including the capabilities to be demonstrated; whether the demonstration would be live, virtual, or hybrid; required facilities, equipment, connectivity, Government-furnished information or equipment, data, cybersecurity or network considerations, safety considerations, estimated preparation time, and estimated demonstration duration. 

CAPABILITY AREAS OF INTEREST 

The Government is interested in understanding industry capabilities in the following areas. These areas are provided solely for market research and do not constitute final requirements or imply a future procurement strategy. Respondents are not required to address every area and should clearly identify the areas applicable to their solution. 

Training and Qualification Management 

  • Initial operator qualification training 

  • Refresher and sustainment training 

  • Instructor-led training 

  • Student performance tracking 

  • Student training records and qualification management 

  • Automated grading and evaluation 

  • After-action review and debrief capabilities 

  • Training syllabus management 

Unmanned Aircraft Simulation and Flight Fidelity 

  • Unmanned Aircraft-specific flight models 

  • Realistic flight characteristics and handling qualities 

  • Unmanned Aircraft performance modeling 

  • Payload effects on aircraft performance 

  • Environmental and weather effects 

  • Emergency procedure training 

  • Lost-link procedures 

  • Degraded system operations 

Mission Planning and Mission Rehearsal 

  • Mission planning functionality 

  • Mission rehearsal capability 

  • Route and waypoint planning 

  • Terrain analysis 

  • Obstacle analysis 

  • Airspace planning 

  • Real-world geographic mission rehearsal 

  • Operational environment replication 

  • Import and export of mission plans, geospatial data, and mapping products 

Terrain and Synthetic Environment 

  • Global terrain databases 

  • Satellite imagery integration 

  • Digital elevation models 

  • Urban environments 

  • Maritime environments 

  • Custom training area generation 

  • Area of Responsibility (AOR) development 

  • User-generated scenarios 

Instructor and Evaluation Capability 

  • Instructor Operator Station (IOS) 

  • Scenario creation and modification 

  • Student monitoring 

  • Real-time scenario control 

  • Scenario replay 

  • Instructor evaluation tools 

  • Scenario injection capabilities 

Contested and Tactical Environment Training 

  • GPS-denied operations 

  • GPS-degraded operations 

  • Electronic warfare effects 

  • Communications degradation 

  • Adverse weather operations 

  • Tactical mission scenarios 

  • Multi-aircraft operations 

System Integration and Interoperability 

  • Integration with operational hand controllers 

  • Integration with operational Ground Control Stations (GCS) 

  • Support for multiple aircraft types 

  • Open architecture solutions 

  • Future aircraft integration 

  • Government-configurable aircraft libraries 

  • Modular system design 

  • Compatibility with commercially available and Government-furnished simulation hardware, controllers, and peripherals 

WHITE PAPER FORMAT AND SUBMISSION INSTRUCTIONS 

White papers shall conform to the following format: 

  • File format: Searchable Adobe PDF. Do not submit ZIP files or password-protected files. 

  • Page size and margins: 8.5 x 11 inches with 1-inch margins on all sides. 

  • Font: Arial or Times New Roman, 11-point or larger. Tables and figure labels may use 9-point font or larger. Condensed fonts and newspaper-column formatting are not permitted. 

  • Length: no more than 30 pages, excluding the cover page, table of contents, acronym list, and appendices containing only product literature or supporting test data. 

  • File size: no more than 20 MB per response unless coordinated in advance with the Point of Contact. 

  • One response per company or team is preferred. Respondents proposing materially different solutions may submit separate white papers. 

Submission deadline: The white-paper submission deadline is concurrent with the RFI response date. 

Submission method: Email the white paper to FoSUAS_Simulator_and_Training_RFI@us.navy.mil and the Contracting Points of Contact identified in this notice. If a response cannot be transmitted by email because of file-size or security restrictions, contact the Points of Contact before the submission deadline to coordinate a Government-approved transfer method. 

Email subject line: "RFI White Paper - Group 1 and Group 2 UAS Training and Simulation - [Company Name]" 

The body of the submission email should identify the company name, white-paper title, primary point of contact, telephone number, email address, business size and socioeconomic status, CAGE code, and UEI.  

Do not submit classified information.  All material provided in response to this RFI shall be UNCLASSIFIED. 

Respondents are responsible for accurately marking all data with applicable proprietary, data-rights, distribution, and export-control markings. Restrictive markings should be applied only to the specific portions requiring protection and not to the response in its entirety. The Government will protect properly marked information from unauthorized disclosure in accordance with applicable laws and regulations but cannot ensure the protection of information that is not clearly marked. 

QUESTIONS REGARDING THIS RFI 

Questions 

Interested parties wishing to submit questions regarding this RFI shall use the RFI Question Submission Link provided as an attachment to this RFI on SAM.gov. 

Questions should be submitted sufficiently in advance of the RFI response date to allow the Government time to respond. The Government will make reasonable efforts to provide timely responses; however, the RFI response date will not be extended solely because a question remains unanswered. 

If a company is unable to access or submit questions using the RFI Question Submission Form due to technical difficulties, questions may be submitted by email to FoSUAS_Simulator_and_Training_RFI@us.navy.mil. Email question submissions shall include the following information: 

  • Company Name  

  • Point of Contact (POC) Name  

  • Point of Contact (POC) Title  

  • Point of Contact (POC) Email Address  

  • Point of Contact (POC) Telephone Number  

  • Question(s)  

Email question submissions shall include the following subject line: 

“Questions – RFI for Group 1 and Group 2 UAS Training and Simulation – [Company Name]” 

Questions shall not include proprietary, competition-sensitive, classified, Controlled Unclassified Information (CUI), export-controlled, or other restricted information, as questions and corresponding Government responses may be consolidated and published on SAM.gov. 

Telephone inquiries regarding this RFI will not be accepted. 

NDAA COMPLIANCE AND SMALL UAS REUSABLE ARCHITECTURE (SRA) AWARENESS 

Information obtained through this RFI may be used to inform future market research activities, acquisition planning, and procurement decisions. Respondents should identify the current compliance status of their proposed solutions with applicable statutory and regulatory requirements, including, as applicable, NDAA FY2020 Section 848, NDAA FY2023 Section 817, NDAA FY2019 Section 889, and the American Security Drone Act of 2023 (FY2024 NDAA, Public Law 118-31, Division A, Title XVIII, Subtitle B, Section 1821). Respondents should also describe any planned pathway to achieve compliance and the associated schedule, risks, and dependencies. 

To support transparency and traceability of NDAA compliance, respondents may, at their discretion, leverage the Navy's Small UAS Reusable Architecture (SRA) framework to document system components, supply-chain attributes, and applicable security controls. The SRA provides Government-backed tools and self-assessment mechanisms that enable vendors to evaluate alignment with applicable DoD-approved benchmarks and facilitate review of compliance artifacts during market research activities. Additional information is available at https://sra.navair.navy.mil. 

The SRA website is Public Key Infrastructure (PKI) enabled and requires a Department of Defense Common Access Card (CAC) or DoD External Certificate Authority (ECA) certificate for access. Additional information, including instructions for obtaining an ECA certificate, is available at https://www.cyber.mil/eca. Accordingly, access to the SRA website may be limited for some respondents. Use of the SRA framework and associated tools is not required to respond to this RFI and is provided for awareness and informational purposes only. 

PROPRIETARY INFORMATION AND GOVERNMENT SUPPORT CONTRACTORS 

Government Support Contractors may assist with the receipt, handling, review, analysis, and administration of responses. These contractors have executed Non-Disclosure Agreements with the Government that prohibit unauthorized disclosure of proprietary information obtained through this market research effort. 

Respondents are responsible for clearly identifying and marking proprietary or competition-sensitive information in their white papers, attachments, and correspondence. The Government will protect properly marked information from unauthorized disclosure in accordance with applicable law and regulation. Respondents should not place restrictive legends on the entire response when only portions contain protected information. 

If a respondent requires a separate Non-Disclosure Agreement with Government Support Contractors, the respondent should submit the proposed agreement and instructions to the Points of Contact with its response. The Government does not guarantee that a separate agreement will be executed and may be unable to evaluate information that cannot be shared with authorized support contractors. Unless the respondent expressly states otherwise in its response, submission constitutes consent for authorized Government Support Contractors to access properly marked proprietary information for purposes of this market research effort. 

ADDITIONAL INFORMATION 

The Government may contact respondents independently for clarification or additional information. Information received may be used to refine market research, capability objectives, potential requirements, acquisition strategy, and planning documents. Respondents are responsible for monitoring SAM.gov for amendments, answers to questions, or follow-on information. Respondents that are foreign concerns, or U.S. concerns with foreign team members or partners, are responsible for compliance with all applicable export-control laws and regulations, including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). 

POINTS OF CONTACT 

 NAVAIR Procurement Group: 

  • Contracting Officer- Diana Harritt diana.k.harritt.civ@us.navy.mil  

  • Contract Specialist – John Barr john.m.barr1.civ@us.navy.mil  

  • Contract Specialist - Mariah Williams - mariah.b.williams.civ@us.navy.mil 

  • RFI Email Inbox: FoSUAS_Simulator_and_Training_RFI@us.navy.mil 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • Simulator Industry Day Q and A.docx

    56 KBAdded in Special Notice version 8Posted
    Download
  • NAVWAR HQCA-2026-A-073_AIR PMO - Group 1 and Group 2 UAS Simulator Industry Day Brief.pptx

    7.9 MBAdded in Special Notice version 6Posted
    Download

Lifecycle

  1. 2
    Version 2Special NoticeArchived

    INDUSTRY DAY FOR GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS

    Notice 2ee4119842274eb0baa8caafdca656b4 on SAM.gov

  2. 3
    Version 3Sources Sought

    Type changed from Special Notice to Sources Sought

    REQUEST FOR INFORMATION (RFI) FOR GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS

    Notice 8f2c81e8b86f44d59ee4540988491b3a on SAM.gov

  3. 4
    Version 4Sources Sought

    REQUEST FOR INFORMATION (RFI) FOR GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS

    Notice f2fb6bafa6ec4f72aeba3231e4961a44 on SAM.gov

  4. 5
    Version 5Sources SoughtCurrent

    REQUEST FOR INFORMATION (RFI) FOR GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS

    Notice fa59c8d3be7b4ea98fb6372bc9f99ccc on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
DISCLAIMER THIS INDUSTRY DAY ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP), REQUEST FOR INFORMATION (RFI), OR SOLICITATION. THIS SPECIAL NOTICE IS BEING UTILIZED IAW FAR PART 10 MARKET RESEARCH TO DETERMINE THE AVAILABILITY AND CAPABILITY OF INDUSTRY TO PROVIDE GROUP 1 AND GROUP 2 UNMANNED AIRCRAFT SYSTEM (UAS) TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS AND TO INFORM POTENTIAL FUTURE ACQUISITION STRATEGIES. THE GOVERNMENT IS NOT OBLIGATED TO AND WILL NOT PAY FOR ANY INFORMATION RECEIVED FROM INTERESTED PARTIES AS A RESULT OF THIS ANNOUNCEMENT. THIS DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES, CAPABILITY BRIEFS, TRAVEL, LODGING, PARTICIPATION IN THIS INDUSTRY DAY, OR ANY OTHER COSTS ASSOCIATED WITH THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS IS STRICTLY VOLUNTARY. FAILURE TO PARTICIPATE IN THIS INDUSTRY DAY WILL NOT PREVENT A COMPANY FROM PARTICIPATING IN ANY FUTURE MARKET RESEARCH EFFORT, REQUEST FOR INFORMATION (RFI), TECHNICAL DEMONSTRATION, OR COMPETITIVE ACQUISITION RELATED TO GROUP 1 AND GROUP 2 UAS TRAINING, MISSION PLANNING, MISSION REHEARSAL, SIMULATION, AND QUALIFICATION MANAGEMENT SYSTEMS. NO TELEPHONE RESPONSES WILL BE ACCEPTED. INTRODUCTION The Aircraft Project Management Office (AIR PMO), under the Portfolio Acquisition Executive Robotic Autonomous Systems (PAE RAS), announces an Industry Day to support market research related to commercially available and emerging Group 1 and Group 2 Unmanned Aircraft System (UAS) Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. This Industry Day is intended for representatives from industry with commercially available or emerging capabilities applicable to Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. Air PMO will use this Industry Day to present representatives from industry with an overview of the Government's current capability objectives, operational considerations, and areas of interest for Group 1 and Group 2 UAS training and simulation systems. Additionally, the Government seeks to better understand commercially available technologies, emerging capabilities, and industry trends that may inform future capability development, requirements refinement, and acquisition planning. This Special Notice is issued in accordance with Federal Acquisition Regulation (FAR) Part 10 as part of the Government's market research process to identify commercially available capabilities and assess industry's ability to support potential future requirements. This announcement is for planning and market research purposes only and does not constitute a solicitation or commitment by the Government. BACKGROUND Simulation-based training has the potential to enhance operator proficiency, improve training availability, increase training throughput, reduce operational risk, and provide realistic Mission Planning and Mission Rehearsal capabilities for Group 1 and Group 2 Unmanned Aircraft Systems (UAS). These capabilities enable operators to safely practice in realistic and challenging operational and threat environments, emergency procedures, and degraded system behaviors that may be impractical, unsafe, or cost-prohibitive to execute using live aircraft. Additionally, simulation-based training may reduce operational impacts associated with range availability, airspace restrictions, spectrum congestion, weather delays, aircraft maintenance requirements, and logistical constraints while supporting standardized, repeatable, and scalable training across multiple UAS platforms. Through this market research effort, the Government seeks to better understand commercially available and emerging technologies, assess current industry capabilities and technology maturity, identify innovative approaches and best practices, and gather information that may assist in refining future capability objectives, training requirements, and acquisition strategies for Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. MARKET RESEARCH PROCESS This Industry Day represents the first phase of Air PMO's market research effort. Subsequent phases are anticipated to include issuance of a Request for Information (RFI) requesting industry white papers, Government review of submitted white papers, and selected technical demonstrations. Information gathered throughout this market research effort may be used to support future capability development, acquisition planning, evaluation of commercially available solutions, and procurement strategies. INDUSTRY DAY Air PMO plans to host a virtual Industry Day via Microsoft Teams focused on Group 1 and Group 2 Unmanned Aircraft System (UAS) Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. The Industry Day is tentatively scheduled for 03 September 2026. Final event details, including the date, time, registration procedures, attendance limitations, and Microsoft Teams meeting information, will be provided through an amendment or attachment to this Special Notice. The event will consist of an unclassified Government presentation followed by a Question and Answer (Q&A) session. During the presentation, Air PMO will provide an overview of current capability objectives, operational considerations, areas of interest, and the overall market research process related to Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. The purpose of the Industry Day is to communicate the Government's areas of interest, provide industry with an understanding of the overall market research process, and facilitate an open exchange of information through the Question-and-Answer session. Following Industry Day, Air PMO anticipates releasing a Request for Information (RFI) requesting industry white papers to obtain additional information regarding commercially available capabilities and assess industry's ability to satisfy potential future Government requirements. Following the Government’s review of submitted white papers, selected vendors may be invited to participate in technical demonstrations to further assess the maturity, suitability, and applicability of proposed solutions. Air PMO will notify only those vendors selected to participate in the technical demonstration phase. Information obtained during the Industry Day, and subsequent market research activities may be used to support future capability development, acquisition planning, and procurement strategies. Interested parties are encouraged to submit questions in advance of the Industry Day to facilitate meaningful discussion during the event. The Government will also accept questions submitted during the live Question and Answer (Q&A) session. Responses may be provided during the event or, as appropriate, published in a consolidated Question and Answer document on SAM.gov following the Industry Day. Interested parties wishing to participate in the Industry Day shall register using the Industry Day Registration Link provided as a link to this Special Notice on SAM.gov. Registration shall be completed no later than the response date identified in this Special Notice. If a company is unable to access or submit its registration using the Industry Day Registration Link due to technical difficulties, registration information may be submitted by email to the Point of Contact identified in this Special Notice. Email registrations shall include the following information: Company Name Attendee Name Attendee Title Attendee Email Address Attendee Telephone Number Email registrations shall include the following subject line: "Industry Day for Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems" Interested parties wishing to submit questions prior to the Industry Day shall use the Industry Day Question Submission Link provided as an attachment to this Special Notice on SAM.gov. Questions shall be submitted no later than the response date identified in this Special Notice. If a company is unable to access or submit questions using the Industry Day Question Submission Link due to technical difficulties, questions may be submitted by email to the Point of Contact identified in this Special Notice. Email question submissions shall include the following information: Company Name Point of Contact (POC) Name Point of Contact (POC) Title Point of Contact (POC) Email Address Point of Contact (POC) Telephone Number Question(s) Questions shall not include proprietary, competition-sensitive, or Controlled Unclassified Information (CUI), as questions and corresponding Government responses may be addressed during the Industry Day or published in a consolidated Question and Answer (Q&A) document on SAM.gov. Email question submissions shall include the following subject line: "Q&A – Industry Day for Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems" Telephone inquiries regarding this Special Notice will not be accepted. CAPABILITY AREAS OF INTEREST The Government is interested in understanding industry capabilities in the following areas. These capability areas are provided solely for market research purposes and are intended to facilitate discussion during Industry Day and subsequent market research activities. They do not constitute final requirements or imply any future procurement strategy. Training and Qualification Management Initial operator qualification training Refresher and sustainment training Instructor-led training Student performance tracking Student training records and qualification management Automated grading and evaluation After-action review and debrief capabilities Training syllabus management Unmanned Aircraft Simulation and Flight Fidelity Unmanned Aircraft-specific flight models Realistic flight characteristics and handling qualities Unmanned Aircraft performance modeling Payload effects on aircraft performance Environmental and weather effects Emergency procedure training Lost-link procedures Degraded system operations Mission Planning and Mission Rehearsal Mission planning functionality Mission rehearsal capability Route and waypoint planning Terrain analysis Obstacle analysis Airspace planning Real-world geographic mission rehearsal Operational environment replication Import and export of mission plans, geospatial data, and mapping products Terrain and Synthetic Environment Global terrain databases Satellite imagery integration Digital elevation models Urban environments Maritime environments Custom training area generation Area of Responsibility (AOR) development User-generated scenarios Instructor and Evaluation Capability Instructor Operator Station (IOS) Scenario creation and modification Student monitoring Real-time scenario control Scenario replay Instructor evaluation tools Scenario injection capabilities Contested and Tactical Environment Training GPS-denied operations GPS-degraded operations Electronic warfare effects Communications degradation Adverse weather operations Tactical mission scenarios Multi-aircraft operations System Integration and Interoperability Integration with operational hand controllers Integration with operational Ground Control Stations (GCS) Support for multiple aircraft types Open architecture solutions Future aircraft integration Government-configurable aircraft libraries Modular system design Compatibility with commercially available and Government-furnished simulation hardware, controllers, and peripherals TENTATIVE INDUSTRY DAY AGENDA (Eastern Time) 1000 – 1015 Welcome and Opening Remarks 1015 – 1115 Air PMO Presentation 1115 – 1300 Question and Answer (Q&A) Session The agenda is provided for planning purposes only and is subject to change. REGISTRATION Additional registration procedures, Microsoft Teams meeting information, and other administrative details will be provided through an amendment to this Special Notice and, as appropriate, directly to registered participants. Information obtained during the Industry Day may be used to refine capability objectives and inform subsequent market research activities. Following Industry Day, Air PMO anticipates issuing a Request for Information (RFI) requesting industry white papers. Information submitted in response to the RFI, together with information gathered throughout this market research effort, may be used to support future capability development, acquisition planning, evaluation of commercially available solutions, and procurement strategies for Group 1 and Group 2 Unmanned Aircraft System (UAS) Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems. NAVAIR appreciates your interest in the upcoming Air PMO Industry Day. In accordance with the Special Notice, N00019-26-PMA-263-0999, in the Introduction section: "This Industry Day is intended for representatives from industry with commercially available or emerging capabilities applicable to Group 1 and Group 2 UAS Training, Mission Planning, Mission Rehearsal, Simulation, and Qualification Management Systems." NDAA COMPLIANCE AND SMALL UAS REUSABLE ARCHITECTURE (SRA) AWARENESS Information obtained through this Industry Day, and subsequent market research activities may be used to inform future market research activities, acquisition planning, and procurement decisions. Accordingly, interested parties should be aware that future Government requirements may include compliance with applicable National Defense Authorization Act (NDAA) provisions, including but not limited to NDAA FY2020 Section 848, NDAA FY2023 Section 817, NDAA FY2019 Section 889, and the American Security Drone Act of 2023 (FY2024 NDAA, Public Law 118-31, Division A, Title XVIII, Subtitle B, Section 1821). The Government is interested in understanding the current NDAA compliance status of commercially available solutions, as well as any planned pathways to achieve compliance where applicable. To support transparency and traceability of NDAA compliance, interested parties may, at their discretion, leverage the Navy's Small UAS Reusable Architecture (SRA) framework to document system components, supply chain attributes, and applicable security controls. The SRA framework provides Government-backed tools and self-assessment mechanisms that enable vendors to independently evaluate alignment with Department of War-approved benchmarks and facilitate review of compliance artifacts during future market research activities. Access instructions for the SRA framework and tools will be provided to verified industry participants. The SRA website is Public Key Infrastructure (PKI) enabled and requires a Department of Defense Common Access Card (CAC) or External Certificate Authority (ECA) certificate for access. Additional information regarding ECA certificates is available at: https://www.cyber.mil/eca Use of the SRA framework and associated tools is not required for participation in this Industry Day and is provided for awareness and informational purposes only. PROPRIETARY INFORMATION Government Support Contractors supporting this effort have executed Non-Disclosure Agreements (NDAs) with the Government that prohibit the unauthorized disclosure of proprietary information obtained during this Industry Day and associated market research activities. Vendors are responsible for clearly identifying and marking any proprietary, competition-sensitive, or Controlled Unclassified Information (CUI) included in pre-submitted questions, written responses, supporting information voluntarily provided to the Government, or other correspondence associated with this Industry Day. Should a vendor require a separate Non-Disclosure Agreement (NDA) with Government Support Contractors, the vendor may submit its NDA, together with any associated instructions, to the points of contact identified in this notice for review. It is the respondent’s responsibility to monitor this site for the release of any follow-on information. POINT OF CONTACT: FoSUAS_Industry_Day@us.navy.mil Contracting: diana.k.harritt.civ@us.navy.mil john.m.barr1.civ@us.navy.mil
100%
Special Notice09/17/2026
Synopsis The Direct Reporting Portfolio Manager for Robotic and Autonomous Systems (DRPM RAS) 4.0, Air Warfare Program Management Office (DRPM RAS 4.0 Air Warfare PMO), Naval Air Station Patuxent River, Maryland, desires to accelerate the identification of unmanned aircraft systems (UAS) and enabling technologies, prototyping integration, and fielding evaluation of potential solutions for the Marine Corps Unmanned Logistics System – Air (ULS-A) logistics distribution mission. During the weeks of 25 January through 5 February 2027, Air Warfare PMO will sponsor a technology demonstration within the continental United States. The Government requests applications from industry to participate in this demonstration; successful performance during the demonstration may subsequently result in the award of an Other Transaction (OT) Prototype Agreement in accordance with 10 U.S.C. § 4022. Announcement Information TRUAS Increment II is intended to provide an organic aerial distribution capability for small-unit logistics support across the last tactical mile in Expeditionary Advanced Base Operations and Distributed Operations. To encourage broad demonstration participation and identify the full spectrum of commercial innovation, the Government invites submissions from all qualified participants, including non-traditional defense contractors and small businesses, whose applications satisfy the minimum threshold requirements, specifically, preference of a Max Gross Take Off Weight (MGTOW) up to 350 lbs and Key Performance Parameter (KPP) 1 – Operational Performance and KPP 5 - Powerplant and Energy Source. See Table 1. The Government reserves the right to select any, all, or none of the applicants for participation in the demonstration. Participants will be required to demonstrate ground set-up and flight preparation procedures for their UAS, perform refueling demonstration, and perform up to five autonomous flights. During the first flight, participating UAS must fly with a 100 lb payload a total of 40 nautical miles (nm), detach the payload (either manually or automatically), fly a return flight of 40 nm with no payload, and land at the original launch site. During the second flight, participating UAS must fly with a minimum 150 lb payload a total of 10 nm, detach the payload (either manually or automatically), fly a return flight 10 nm with no payload, and land at the original launch site. The UAS must complete each required flight without refueling. Following the two required flights, participants may be given the opportunity to perform up to three additional flights to demonstrate unique features and/or capabilities, subject to Government approval. The UAS must transit at an airspeed no less than 50 knots and an altitude no greater than 1,000 feet above ground level (AGL). The UAS must be capable of launching and recovering without a catapult, arresting net or cable, or other mechanical launch or recovery equipment. Participants shall ensure that their UAS is equipped with a transponder with a minimum of a Mode-3/C capability. Participants, as part of their application, will be required to provide the Government with lost-link/return-to-home procedures to support range safety requirements. Participants will also be required to provide the Government with technical information to support coordination for frequency spectrum authorization, and Government facility access, if required. Participants must provide data that validates the maximum theoretical range of their UAS with 100 lb and 150 lb payloads. The Government, with assistance of contracted support personnel, will coordinate demonstration range set-up and provide coordination assistance for airworthiness certification and frequency allocation as required. The Government may award an OT prototype agreement to the participant(s) whose UAS capability demonstrate the most advantageous combination of the KPP and Key System Attributes (KSA) requirements outlined in Table 1 and Table 2. To be considered for the demonstration, UAS capabilities must meet threshold minimum requirements for KPP 1 and KPP 5. During evaluation for potential OT award, the Government will prioritize capabilities that achieve KPP and KSA threshold and objective requirements. Government Evaluators will record performance data for each participant’s flight demonstrations. UAS will be ranked based on demonstrated ability to achieve threshold and objective requirements. The Government intends to select the highest-ranked UAS capability(ies) that offer the most advantageous utility to the Marine Corps logistical mission for potential OT prototype awards. The Government reserves the right to consider partial solutions addressing a subset of the requirements and retains the flexibility to make an award even if not all KPP and KSA thresholds and objectives are fully met, provided the proposed solution successfully satisfies the Marine Corps logistical mission. The Government reserves the right, in its sole discretion, to award zero, one, or multiple OTs following this demonstration event. Selection to participate in the demonstration does not guarantee an OT award. Selectees will be required to join the Naval Aviation Systems Consortium (NASC) in order to be eligible to receive an OT award; more information is available at www.nascsolutions.org. In accordance with 10 U.S.C. § 4022, a successfully completed prototype project may result in the award of a follow-on production agreement or contract without further competition. In addition to the primary consideration for an OT prototype agreement, the Government will analyze flight performance data and, upon request, may share these results with the Army-managed Drones.Mil Marketplace team. The marketplace provides a streamlined, pre-vetted pathway for other Department of War (DoW) and allied partners to procure platforms. Interested and eligible applicants must submit a 3-5 page white paper that describes their technical approach and the technical maturity of their UAS together with the completed questionnaire found at https://nascsolutions.org/project/truas-increment-ii-cargo-uas-industry-demonstration/. There are no NASC Membership requirements and no associated fees required with the application submission or to participate in this demonstration. Applications will be scored in accordance with the TRUAS Increment II Application Evaluation Rubric, which is available for download at https://nascsolutions.org/project/truas-increment-ii-cargo-uas-industry-demonstration/. To ensure an eligible score for demonstration selection, applicants are encouraged to review this rubric and address eligibility criterion within their white paper and/or questionnaire response. Applications for participation will be submitted to nascopportunities@nascsolutions.tech and accepted until 2359 EST on 30 November 2026. The Government may, but is not required to, seek clarifications or additional information from applicants regarding their application. Notification to selected participant(s) will be issued via e-mail no later than 2359 EST on 18 December 2026; information regarding the demonstration venue will be provided within selection email. Submit technical questions to nascopportunities@nascsolutions.tech by 13 November 2026. Technical questions and answers related to the demonstration will be posted and updated on https://nascsolutions.org/project/truas-increment-ii-cargo-uas-industry-demonstration/. See attached announcement, TRUAS Increment II Demonstration Announcement, for full details related to this demonstration and its associated attachments. AMENDMENT 0001: Location venue of the technology demonstration is revised within the announcement to state within the continental United States. See attached amendment, TRUAS Increment II Demonstration Announcement Amendment 0001. Changes are highlighted in yellow.
59%
Special Notice11/30/2026
Reference Solicitation and attachments for details and instructions.
48%
Combined Synopsis08/17/2026
1.0 INTRODUCTION The Naval Air Systems Command (NAVAIR), PMA-209, located at Naval Air Station Patuxent River, Maryland, is seeking information from potential sources regarding a modular Software Defined Radio (SDR) for U.S. Navy and Marine Corps aircraft, designated the Next Generation Tactical Radio (NGTR). The NGTR is intended to support voice and data waveforms in the Very High Frequency (VHF) and Ultra High Frequency (UHF) bands, with operational capability extending up to 6 GHz. It will incorporate a modular High Assurance Device (HAD) to meet National Security Agency (NSA) cryptographic and Security Evaluation Requirements Document (SERD) requirements. Additionally, the NGTR is designed to serve as a form, fit, and function backwards-compatible replacement for aircraft currently equipped with the ARC-210 Generation 5 and Generation 6 radios. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Request for Information (RFI) will be utilized to determine if any Small Business Set-Aside opportunities exist. Additionally, this RFI is being used to gather constructive information from industry to improve the RFP. The following documents are attached to this RFI Notice: Attachment 1: NGTR RFI Performance Requirements - DRAFT Attachment 2: Program and Risk Feedback Matrix The following dates are anticipated time frames associated with this requirement: Estimated Industry Day: 2nd Quarter FY27 Estimated Draft RFP Release: 3rd Quarter FY 27 Estimated Final RFP Release: 4th Quarter FY 27 Estimated Award Date: 2nd Quarter FY 28 Target Fleet Delivery: Mid-2034 – Production-ready NGTR systems delivered to fleet locations for aircraft installation Primary Place of Performance: Contractor facility and as needed at government test sites and government facilities for meetings with NAVAIR and NSA. 2.0 DISCLAIMER THIS REQUEST FOR INFORMATION (RFI) IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS REQUEST IS STRICTLY VOLUNTARY. 3.0 PROGRAM BACKGROUND The NGTR system's goal is to develop a small form factor system compatible with existing and future U.S. Navy and Marine Corps aircraft that will support: Communications waveforms in the VHF, UHF frequency bands with support for waveforms up to 6GHz. Waveforms defined in Attachment 1. A Modular, Open architecture to support rapid capability integration and obsolescence upgrades including a modular High Assurance Device (HAD) that supports NSA cryptographic and SERD requirements. Zero Trust System security meeting applicable Risk Management Framework (RMF) controls. Minimal integration impact and modification requirements for existing and future U.S. Navy and Marine Corps aircraft platforms. 4.0 SPECIAL REQUIREMENTS AND REQUIRED CAPABILITIES The NGTR system is expected to meet the performance requirements defined in Attachment 1: “NGTR RFI Performance Requirements” - DRAFT. The NGTR Contractor is expected to meet the following qualifications: Have secure military software defined radios with embedded NSA certified cryptography. Have experience in agile and modular development and testing, incorporating customer feedback throughout the process. Have the ability to obtain Top Secret security clearances for employees and facility within 12 months of contract award, including the ability to support development and test up to the Top Secret level. Have experience in developing and producing UHF and VHF RF radios supporting military and non-military communications waveforms. Has experience in Model-Based Systems Engineering (MBSE). Have expertise and experience in reducing total life cycle support costs and utilizing predictive maintenance strategies to streamline repair procedures and reduce maintenance downtime. Have experience establishing, maintaining, and documenting a proactive DMSMS (Diminishing Manufacturing Sources and Material Shortages) and obsolescence programs. 5.0 ELIGIBILITY The applicable North American Industry Classification System (NAICS) code for this requirement is 334220 (Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing), with a Small Business Size Standard of 1,250 Employees. The Product Service Code (PSC) is 5821, (Radio and Television Communication Equipment, Airborne). Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. To assist in market research and determination of any applicable small business set-aside for this effort, small businesses interested in priming this effort and planning to use “similarly situated entities” to meet the Limitations on Subcontracting, are requested to identify: The name & CAGE Code of the specific firm(s) intending to partner/subcontract Their small business size status under the NAICS that as the prime, you would assign for their workshare. 6.0 SUBMISSION DETAILS To ensure a fair, orderly, and efficient evaluation process, all interested parties must adhere to the following submission guidelines: 6.1 Logistics and Deadlines Response Date: All submissions must be received no later than 2:00 PM EST on 14 December 2026. Questions Deadline: Clarifying questions regarding this RFI must be submitted via email no later than 10 business days prior to the response date. 6.2 Submission Method and Point of Contact (POC) Delivery: Submissions must be sent via Electronic-mail (Email) to the Contract Specialist, Sham Keswani, at sham.v.keswani.civ@us.navy.mil. Subject Line Format: The email subject line must read: NGTR RFI Response - [Company Name]. Inquiries: No phone calls will be accepted. All questions must be submitted via email to the Contract Specialist listed above. 6.3 Format and Structure Instructions Page Limit: Submissions must not exceed ten (10) pages total (excluding the Program and Risk Feedback Matrix in Section 7.0). Page Size & Margins: Standard 8.5 x 11-inch pages with 1-inch margins. Font: Times New Roman, font size of not less than 10 point. Document Type: Adobe PDF format. Classification: No classified information shall be submitted in response to this RFI. 6.4 Required Content Your submission package must include the following structured sections: Cover Page / Company Profile: Company Name, Address, CAGE Code, DUNS/UEI, Business Size Status under NAICS 334220, and designated Points of Contact (POC) including names, phone numbers, and email addresses. Capabilities Statement: A detailed narrative addressing your ability to meet the special requirements and required capabilities outlined in Section 4.0. Program and Risk Feedback: Completed responses to the targeted questions and the structured feedback matrix outlined in Section 7.0. 6.5 Proprietary Data and Information Handling All data received in response to this RFI that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this RFI Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise resulting from responses to this RFI Notice. 7.0 PROGRAM AND RISK FEEDBACK The Government is actively seeking constructive industry feedback to refine the NGTR program structure, technical requirements, and acquisition strategy. Industry Feedback Disclaimer: We actively encourage vendors to challenge our assumptions, highlight potential program risks, and suggest alternative approaches. Candid feedback regarding the feasibility of our timeline, scope, or technical requirements is highly valued and will not negatively impact your evaluation in any future procurement processes. 7.1 Targeted Feedback Questions Please provide direct, concise answers to the following questions within your submission: Program Scope & Feasibility: Based on the draft performance requirements (Attachment 1), are there any requirements that you view as overly restrictive, technologically unfeasible, or drivers of unnecessary cost? Timeline Realism: Reviewing our anticipated milestones Final RFP in FY27, Award in FY28, and a target fleet delivery of production-ready systems by mid-2034), is this timeline realistic for a system of this complexity? Please address the timeline required for development, environmental testing, platform integration, and NSA cryptographic certification. Cryptographic & Security Integration: What are the primary technical and certification risks associated with integrating a modular High Assurance Device (HAD) to meet NSA cryptographic and SERD requirements within the proposed form factor? Obsolescence & DMSMS: What proactive strategies do you recommend the Government incorporate into the contract structure to best incentivize long-term DMSMS management and minimize life cycle support costs? 7.2 Program and Risk Feedback Matrix Please utilize the attached structured template to document specific risks, scope concerns, or program improvements:
46%
Pre-Solicitation12/14/2026
Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price contract on a noncompetitive basis to Berkeley Varitronics Systems, Inc. – 255 Liberty St., Metuchen NJ 08840 USA to provide the following supply: Yorkie Pro cell phone detector This action is undertaken in accordance with FAR 13.106-1(b)(1) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements The North American Industry Classification System (NAICS) for this requirement is 334220. The FSC code is 6350. The resulting contract will be a firm fixed price contract. Negotiation being conducted using other than full and open competition procedures pursuant to authority of 41 U.S.C 1901. This Notice of Intent is not a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by November 10, 2026, at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. The determination not to compete this proposed contract action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Responses to this electronic notice must be made by 10:00 a.m. EST on November 10, 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements, quotes, and capabilities to Shannon Wooten, via email: Shannon.cloud-wooten@navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.
46%
Special Notice11/10/2026

Additional Details

Solicitation Number

N00019-26-DRPM-RAS-AIRPMO-0294

Archive Date

Jan 6, 2027

Office Address

PATUXENT RIVER, MD, 20670-5000