GovChime
Notice ID: 3d509238f930465f867aba34749709cfSources Sought

Hydraulic Actuator Flow Test Stand

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
November 17, 2026
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAIR.NAVAIR HQS.FLEET READINESS CENTER
Place of performance
San Diego, California
Last updated
Nov 17, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
3d509238f930465f867aba34749709cf

Description

SOURCES SOUGHT NOTICE

Hydraulic Actuator Flow Test Stand (HAFTS)

DISCLAIMER

THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.

ALL LARGE AND SMALL BUSINESSES THAT ARE INTERESTED SHOULD SUBMIT A CAPABILITY STATEMENT. THE RESULTS OF THIS SOURCES SOUGHT WILL BE UTILIZED TO DETERMINE IF ANY SMALL BUSINESS SET-ASIDE OPPORTUNITIES EXIST. ALL SMALL BUSINESS SET-ASIDE CATEGORIES WILL BE CONSIDERED. OTHERWISE, THIS MARKET RESEARCH IS BEING USED TO IDENTIFY POTENTIAL AND ELIGIBLE FIRMS, OF ALL SIZES, PRIOR TO DETERMINING THE COMPETITIVE METHOD OF ACQUISITION AND ISSUANCE OF A SOLICITATION.

Potential Respondents are responsible for monitoring SAM.gov for updated documentation and the latest information regarding this procurement and any potential solicitation release. No phone calls or emails requesting the status of a potential solicitation will be accepted before its release. All interested parties must monitor SAM.gov.

All data received in response to this Sources Sought Notice that is marked or designated as corporate or proprietary will be protected from release outside the Government to the extent permitted by law. Information and materials submitted in response to this request will not be returned. Classified material shall not be submitted. Respondents are advised that the Government will not pay for information or administrative costs incurred in response to this Sources Sought Notice.

This notice serves as a market research tool conducted in accordance with Federal Acquisition Regulation (FAR) Part 10 to assess potential Respondents and their technical capabilities. The findings from this market research will assist in determining the appropriate procurement strategy. Respondents that believe they possess the capability to provide the required product, either as a prime contractor or joint venture, are invited to respond.

PLACE OF PERFORMANCE

Location: Fleet Readiness Center Southwest (FRCSW) Coronado, California

ANTICIPATED CONTRACT TYPE

The Government is anticipating this effort to be a single award Firm Fixed Price (FFP) contract with FFP CLINs. The intended delivery date will be 365 days after contract award (ACA).

ELIGIBILITY

The applicable North American Industry Classification System (NAICS) code for this requirement is anticipated to be 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing, with a corresponding small-business size standard of 1,250. The Product Service Code (PSC) for this effort will be 4920 Aircraft Maintenance and Repair Shop Specialized Equipment. Businesses of all sizes are encouraged to respond. Each respondent must clearly identify its business size and socioeconomic status in its capability statement.

REQUIREMENTS INFORMATION

The Naval Air Systems Command (NAVAIR), Commander, Fleet Readiness Centers (COMFRC), Patuxent River, Maryland, is conducting market research to identify capable sources for the procurement of one (1) new Hydraulic Actuator Flow Test Stand (HAFTS) supporting the E-2C/E-2D platform. The HAFTS will replace an existing test stand and be installed at FRCSW North Island, Building 472 Hydraulic Shop.

The requirement is for a turnkey HAFTS solution. The contractor shall provide all parts, labor, materials, engineering, shipping, rigging, installation, start-up, commissioning, validation, calibration, testing, technical data, and training necessary to provide a fully operational system. No building modifications or alterations are included in the requirement.

At a minimum, the HAFTS must be capable of supporting depot-level testing of hydraulic actuators, servo cylinders, valve assemblies, landing gear actuating cylinders, wing-fold cylinders, and related E-2C/E-2D hydraulic units under test (UUTs). The test stand must perform testing in accordance with applicable NAVAIR technical publications identified in the draft Statement of Work (SOW).

The HAFTS shall include, at a minimum, the following capabilities:

  1. Hydraulic performance. Manually controlled hydraulic pressure and flow to the UUT; a minimum 60-gallon reservoir using MIL-PRF-83282 hydraulic fluid; hydraulic filtration; temperature control; low-oil indication; and automatic protective shutdown features.
  2. Pressure and flow capacity. An integrated motor and pump system capable of providing 0–5,000 pounds per square inch (psi) and 0–30 gallons per minute (gpm), plus a manual hand pump capable of 0–10,000 psi.
  3. Test area and interfaces. An enclosed test area using existing Government holding fixtures; sufficient space for UUT extension and retraction; at least two pressure ports and two return ports; and integrated 0–120 VAC, three-phase, 400Hz and 0–40 VDC power capability.
  4. Electrical and safety features. Compatibility with available facility power of 480V, three-phase, 60Hz; compliant disconnect and lockout capability; electrical safety features; emergency-stop switches; guarding; and applicable hydraulic, pneumatic, electrical, and industrial-machine safety compliance.
  5. Installation and facility integration. Complete delivery, rigging, uncrating, placement, anchoring, leveling, calibration, utility connection, and testing. The Government will provide utilities within 20 feet of the HAFTS and will drill anchor-bolt holes to the contractor’s provided specifications. The contractor is responsible for required rigging documentation and lift planning.
  6. Testing and acceptance. Origin inspection and testing at the contractor’s facility, followed by final inspection and acceptance testing after installation at FRCSW North Island. The contractor must provide calibrated test resources and demonstrate that the HAFTS can satisfactorily test Government-furnished UUTs in accordance with applicable technical-manual parameters.
  7. Technical data and training. Required deliverables include technical data, a Plan of Action and Milestones, preliminary and critical design reviews, Instrument Calibration Procedures Source Data, an Acceptance Test Plan, printed training aids, and test/inspection reports. The contractor must also provide operator and maintenance training at FRCSW.

Please review the attached Draft Statement of Work (SOW) and associated draft Contract Data Requirements List (CDRL)/DD Form 1423 documentation for complete requirements.

The contractor must achieve and maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 or above in accordance with DFARS 252.204-7021 for each contractor information system that will process, store, or transmit Federal Contract Information used in performance of the contract.

Contractor personnel requiring on-site access must comply with Naval Base Coronado and FRCSW access procedures, including advance submission of required access forms. The draft SOW also requires Government approval before onsite photography or videography.

Respondents capable of meeting this requirement and maintaining the capability throughout the duration of the contemplated effort are encouraged to respond.

SUBMITTAL INFORMATION (CAPABILITY STATEMENT)

All submissions shall include the Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, Declaration as to whether a U.S. or foreign company and Points of Contact (POC), including names, phone numbers, and email addresses. Capability statements should demonstrate the respondent’s ability to provide the complete turnkey HAFTS requirement described in the draft SOW.

The Government may elect not to discuss submissions received in response to this Source Sought with individual responders.  There is no requirement to respond to the Sources Sought to be eligible for this procure.  However, the Government places tremendous value on the information received and may utilize it to finalize its acquisition strategy.  Respondents shall fully use this opportunity to describe proven capabilities in performing the requirement as described in the Draft SOW. 

Documentation must address, at a minimum, the following:

  1. Reference the Notice ID N68520-27-RFPREQ-KN00000-0075 and the title “Hydraulic Actuator Flow Test Stand (HAFTS) – SOW” and “Hydraulic Actuator Flow Test Stand (HAFTS) - Draft CDRLs R1”;
  2. Respondent’s profile to include number of employees, annual revenue history, office location(s), Unique Entity ID (UEI), and a statement regarding current small/large business status;
  3. Must indicate whether the Respondent is a large business or qualify as a Small Business (SB), Small Disadvantaged Business (SDB), Women-Owned Small Business (WOSB), HUBZone Small Business (HUBZone), Veteran-Owned Small Business (VOSB), or Service-Disabled Veteran Owned Small Business (SDVOSB) Concern;
  4. Proof of current and valid CMMC Level 2 status or its ability to achieve and maintain the required CMMC Level 2 compliance for information systems used in contract performance. The certification will not count towards the total page count.
  5. Prior/current corporate experience performing efforts of similar size and scope within the last three (3) years, including contract number, organization supported, indication of whether as a prime or subcontractor, contract values, Government point of contact with current telephone number, and a brief description of how the referenced contract relates to the services described herein;
  6. Demonstrate the ability to design and manufacture a hydraulic test stand capable of meeting the draft SOW’s pressure, flow, fluid, electrical-power, safety, control, test-area, and units under test (UUTs)-testing requirements;
  7. Describe the respondent’s capability to complete origin testing, destination acceptance testing, installation, rigging, weight-handling planning, calibration, technical-data development, and Government personnel training;
  8. Describe the ability to meet on-site access, facility, safeguarding, cybersecurity, and photography/video requirements;
  9. If the respondent can perform only portions of the draft SOW, identify the specific portions it can and cannot perform. If teaming or utilizing subcontractors will be used, identify the work each teammate or subcontractor would perform and explain how the prime contractor will ensure subcontractor capability and performance;
  10. Identify any anticipated technical, schedule, integration, logistics, or facility-interface risks; proposed mitigations; and any recommended clarifications to improve competition or reduce performance risk; and
  11. Provide any other specific and pertinent information that would enhance the Government’s consideration of the respondents’ capabilities.

Vendors should appropriately mark any data that is proprietary or has restricted data rights.

Interested Respondents shall submit capability statements (no more than 15 pages in length, single spaced, Times New Roman 11-point font) electronically in Microsoft Word or Portable Document Format (PDF) to the Contract Specialist, Stacy Miller at stacy.m.miller23.civ@us.navy.mil and the Contracting Officer, Amanda Taylor at amanda.j.taylor80.civ@us.navy.mil, no later than 5:00 PM Eastern Standard Time (EST) on 02 December 2026. If a DOD SAFE link is required for a Respondent to submit their capability statement, the Respondent must request via email to the Contract Specialist and the Contracting Officer, seven (7) business days prior to the closing of this notice. Late requests will not be accepted. When the Contract Specialist generates a DOD SAFE drop-off request for the Respondent, you will receive an email with a link to submit your drop-off. This link is good for a one-time submission; ensure that the submission is sent to both the Contract Specialist and the Contracting Officer. All questions or inquiries regarding this notice must be directed to the Contract Specialist and the Contracting Officer. Any questions regarding the Government documents must be submitted utilizing the questionnaire attachment within this sources sought notice. No phone calls will be accepted.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Documents

Files (2)

  • Hydraulic Actuator Flow Test Stand (HAFTS) - Draft CDRLs R1.pdf

    2.3 MBAdded in Sources Sought version 1Posted
    Download
  • Hydraulic Actuator Flow Test Stand (HAFTS) - SOW.docx

    83 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    Hydraulic Actuator Flow Test Stand

    Notice 3d509238f930465f867aba34749709cf on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

N68520-27-RFPREQ-KN00000-0075

Archive Date

Dec 17, 2026

Office Address

PATUXENT RIVER, MD, 20670