Notice ID: cf01eaa784f84b108dd259e6d256b158Award NoticeAwardedArchived
N--FY26 I612287 UPFIT - ROMO
Awarded on March 6, 2026. Full description on SAM.gov.
Awarded tounder 140P1226P0008 (source: SAM.gov award notice)• $23.4K
Overview
- Posted
- March 6, 2026
- Notice type
- Award Notice
- NAICS
- 811114: Specialized Automotive Repair
- Agency
- Department of the InteriorNATIONAL PARK SERVICE
Notice details
- Office
- IMR INTERMOUNTAIN REGION(1200)
- Last updated
- Nov 3, 2026
- First published
- Last updated on SAM.gov
- Award date
- Mar 6, 2026
- Award amount (SAM.gov award notice)
- $23.4K
Identifiers
- Solicitation number
- 44034774
- Notice ID
- cf01eaa784f84b108dd259e6d256b158
- Award number (PIID)
- 140P1226P0008
Description
FY26 I612287 UPFIT for Rocky Mountain National Park
Award Overview
Award Number
140P1226P0008
Award Amount (SAM.gov award notice)
$23.4K
Award Date
Mar 6, 2026
Awardee
Awardee UEI
NB1NLJWHF185
Awardee CAGE Code
4DGJ6
Awardee Address
7124 S DILLON CT STE 100, Englewood, CO 80112, UNITED STATES
Original Solicitation
Notice ID: cf01eaa784f84b108dd259e6d256b158
Posted Date: Mar 6, 2026
Original Response Deadline: Not specified
More From This Vendor
Top 5 most recent
- $14.8KSigned Apr 14, 2026
- $33.8KSigned Feb 25, 2026
- $28.2KSigned Dec 18, 2025
- $24.8KSigned Dec 9, 2025
- $14.8KSigned Dec 1, 2025
Contacts
Contracting Officer
Primary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Justification | NATIONAL PARK SERVICE | Mar 6, 2026 | 545.65 KB |
Lifecycle
- 3Version 3Award NoticeArchivedCurrent
N--FY26 I612287 UPFIT - ROMO
Other notices for this solicitation
- Sole Source / J&ARelated noticeMar 6, 2026
N--FY26 I612287 UPFIT - ROMO
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
AIR COMPRESSOR MAINTENANCE & REPAIR FY27 TO 31 | - | Market Research | 11/17/2026 |
BPA Call - NCAO Vehicle UHF Radio Installation Services | - | Awarded | Open |
This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D6537 , VIN# 1FD8W3FN9TEE72593). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60 Inch Cab to Axle Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed Truck Body Cab length running boards. Utility Body Body- CM brand TM body or equivalent - Spring mounted front mount - Final overall ground clearance to match lowest point on truck cab. Roughly 22 inches. -1 st Front vertical compartment - 2each 8-inch-tall heavy duty slide out drawers -mounted at bottom of bin -3/16 th floor deck -Compartment lights in each bin -Utility Box compartment lighting -In floor Tiedown -E-track -Bed liner -Additional storage boxes on top side of PS and CS of First vertical bin. - Full Length First vertical bin - Full width First vertical bin - Box must not cover headache rack brake lights - Doors must open up for access. - Must be equipped with struts to hold open door - Heavy Duty Spare Tire Rack and Cab protector screen -Rack must be removable to facilitate vehicle cab removal. Hitch and Bumper -Class 5 receiver hitch Rated at no less the 18,000lbs -Recessed bumper -Trailer Electrical plug wired to SAE J2863 standard - Back up camera -Centrally located and protected rear view camera mount | - | Combined Synopsis | 10/30/2026 |
This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D0359 , VIN# 1FD8W3FT7TEE20765). All equipment must be covered by the manufacturer’s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60-inch cab to axle Front Bumper - Warn 12K winch with wire rope. - mounted in front of bumper. Truck -Cab length running boards Enclosed Utility Body Body -Either 8 or 9ft feet in length - Fully enclosed service body. Similar to Reading TPA60-98SW, or Knapheide KUVCC, or equivalent. -Overall height not to exceed 100 inches. -Made of steel. -Barn door style double door, with windows and security screens. -Tapered sides - Side compartments on topper portion of body, Picture below -1 st Front vertical compartment -C Tech or equivalent style drawer system. -2 nd horizontal bin -1 adjustable shelves with dividers -3rd Rear Vertical Bin -3 adjustable shelves with dividers -Compartment lights in each bin -Utility Box compartment lighting -Central Locking System -In floor Tiedown - Minimum of 22 inches of ground clearance after installation Hitch and Bumper -Class 5 receiver hitch Rated at no less than 18,000lbs -Trailer Electrical plug wired to SAE J2863 standard - Back up camera -Centrally located and protected rear view camera mount | - | Combined Synopsis | 10/30/2026 |
LA-SPEC AGNT-LACOMBE LA-TURTLE CARE | - | Awarded | Open |
Additional Details
Solicitation Number
44034774
Archive Date
Mar 21, 2026
Office Address
Denver, CO, 80225