GovChime
Notice ID: 519f5032a82e4e12bb908c9b4a55a724Combined Synopsis/SolicitationArchived

RollAstep MP72 Brand Name Only (BNO)

Archived on October 14, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EDT
Posted
September 24, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Agency
General Services AdministrationFEDERAL ACQUISITION SERVICE

Notice details

Office
GSA/FAS REGION 7 ACQUSITION CENTER
Place of performance
65180, California
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
47QSSC-27-Q-0005
Notice ID
519f5032a82e4e12bb908c9b4a55a724

Description

GSA has a requirement for three RollAstep MP72 and compatible components.  This acquisition is being conducted as an open-market commercial product acquisition under FAR Part 12. The requirement is Brand Name Only.

This is a Brand Name Only requirement for RollAStep MP72 platforms and compatible components. The brand-name restriction applies to the required supplies, not to a specific vendor. Any responsible vendor may submit a quotation if it can provide the required RollAStep MP72 brand-name products and compatible components.

The Government currently has RollAStep MP72 platforms in service, and the required platforms, socket kits, and safety gates must be fully compatible with existing equipment. Alternate brand or equal products will not be accepted. 

A fully completed and signed RFQ, as well as MIL STD 129R must be returned by the closing date and time. Any quote recieved without the completed RFQ will not be considered for award. Please send all quotes to Nancy Seale, nancy.seale@gsa.gov. 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • Open Market RFQ BNO.pdf

    878 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • MIL STD 129R and Supplement.pdf

    1.3 MBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    RollAstep MP72 Brand Name Only (BNO)

    Notice 519f5032a82e4e12bb908c9b4a55a724 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Please reference this requirement Notice ID and Project Title in subject line of any email correspondance. Please include Hugo Ruano Gutierrez and Lauren Reigenborn in ALL email correspondance. This requirement includes a site visit on 28 October 2026 and an RSVP is required for attendance. Please RSVP NLT 1500 Mountain Time on 26 October 2026. When RSVPing please provide a scan of official government issued ID such as driver's licesnse or passport and current registration, proof of insurance, or valid rental vehcile agreement as applicable for any vehicle(s) you will be brining on the installation.
65%
Combined Synopsis11/23/2026
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation.
59%
Combined Synopsis11/13/2026
59%
AwardedOpen
The 45th Contracting Squadron, Patrick Space Force Base (PSFB), intends to award a sole source contract to Spyder Crane for the delivery of Portable Crane for Aircraft. This action is being pursued in accordance with FAR 13.106‑1(b)(1), which permits soliciting from a single source when the contracting officer determines that only one source is reasonably available. As required by FAR 5.207(c)(15), market research confirms that Spyder Crane is the only source capable of delivering a Portable Crane for Aircraft. TELEPHONE INQUIRES WILL NOT BE ACCEPTED.
59%
Special Notice11/10/2026
Hoist Stand
59%
Combined Synopsis09/24/2026

Additional Details

Solicitation Number

47QSSC-27-Q-0005

Archive Date

Oct 14, 2026

Office Address

FORT WORTH, TX, 76102