GovChime
Notice ID: 01c91c3daf87426881046ac3b435d804Combined Synopsis/SolicitationArchived

NSN 5180014263972 (TOOL KIT, PIPEFITTER'S)

Archived on January 6, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
December 15, 2025
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
332510: Hardware Manufacturing
Agency
General Services AdministrationFEDERAL ACQUISITION SERVICE

Notice details

Office
GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION
Place of performance
San Diego, California
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
47QSSC26Q0029
Notice ID
01c91c3daf87426881046ac3b435d804

Description

The General Services Administration, Supply Chain Management Contracting Division (SCMCD), is posting a Request for Quote (RFQ) for Brand Name NSN 5180014263972. Vendors quoting must be registered to receive Purchase Orders via EDI or through OMS Vendor Portal. This RFQ is a brand name requirement with an item product description (IPD) included at the bottom of the RFQ. All delivery locations will be within the Continental United States and shipments must be compliant with MIL- STD-129 marking and labeling. Full delivery addresses will be provided on awarded Purchase Orders. Prices are requested on a FOB Destination basis with the vendor's best delivery leadtime.

A vendor meeting all administrative compliance requirements in Section 3 of the RFQ (submitted by the solicitation close date and time) will move forward to the final evaluation factor: Low Price.

If any required documents are not submitted or required fields left blank on RFQ document are not made (as applicable), further consideration for award will not be made.

Please find attached the RFQ and MIL-STD-129 forms. Please contact amya.watts@gsa.gov with any questions.

Please email quotes to amya.watts@gsa.gov with the referenced subject line: NSN 5180014263972 | RFQ 47QSSC26Q0029. 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • MILSTD 129.pdf

    1.3 MBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • R214475324ER60_5180014263972 RFO FAR 12 RFQ.pdf

    324 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    NSN 5180014263972 (TOOL KIT, PIPEFITTER'S)

    Notice 01c91c3daf87426881046ac3b435d804 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Supply Chain Management (SCM) Contracting Service Center, Direct Demand Division (DDD), is issuing this Request for Quotation (RFQ) for one requisition for one (1) kit (KT): NSN: 5180-01-426-3972 Part Number: 90 8015 7 Description: Tool Kit, Pipefitter’s This requirement must meet the salient characteristics identified in the Item Purchase Description (IPD) at the bottom of the RFQ. All attached RFQ documents must be completed, signed, and returned no later than the RFQ closing date and time of October 30, 2026, at 5:00 PM Eastern Time to be considered for award. Quotes submitted after the closing date and time will not be considered for award. For questions regarding this requirement, contact Benjamin Gross at benjamin.gross@gsa.gov.
66%
Solicitation11/03/2026
Noun: Tool Kit, Elevating, NSN: 5180-01-206-0856, Quantity: 8 Each/ 100% Option, FOB: Destination. This procurement is a 100% small business set-aside. Technical Data is available for this procurement. The solicitation should be released to the web on or about 17 June 2026. See the solicitation for actual closing date. Once available, the solicitation can be downloaded from FedBizOpps (www.fbo.gov). **************************************************************************************************** EXPORT CONTROLLED Joint Certification Program (EXPORT CONTROL) You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/Logistics-Operations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation, via Contract Opportunities (www.sam.gov). To register, or to re-register, please select the DD Form 2345 link from the Joint Certification Program (JCP) Home page (https://www.dla.mil/Logistics-Operations/Services/JCP/) and follow the instructions for completion, noting the required documentation to submit with the form. Mail the Form 2345, along with the required documentation to to the address is provided on form; it CANNOT be faxed or emailed. The process should take no more than one week for you to be certified or denied for approval under the JCP. If you encounter problems, please contact JCP at 1-877-352-2255 or via email at JCP-ADMIN@DLA.MIL or dlacontactcenter@dla.mil. Your firm must request access to the TDP in Contract Opportunities (www.sam.gov) in addition to submitting the above form in order to be granted access to the TDP. Once these requirements have successfully been completed, you will be granted access to the TDP. If you do not have access to Contract Opportunities, recommend you register as soon as possible REVERSE AUCTION The solicitation will contain provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.
62%
Pre-Solicitation06/16/2026
THIS PROCUREMENT IS A 100% SMALL BUSINESS SET-ASIDE. NSN: 5180-01-206-0856, Noun: Tool Kit, Elevating, P/N: 12321231, Quantity: 8 Each/100% Option, FOB: Destination. The purpose of amendment 0001 is to extend the closing date to 15 October 2026.
62%
Solicitation10/15/2026
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. The Naval Air Warfare Center, Weapons Division, China Lake, intends to award on an other than full and open competitive basis, a firm fixed price contract for: Snap-On Toolboxes & Tools To Snap-on Industrial A Division of IDSC Holdings LLC, PO BO 9004, Crystal Lake, IL 60014-9004. This is being awarded to Snap-on under their GSA schedule 47QSHA19D005N with some open market items. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties that believe they can fulfill this completely on GSA can provide an email of interest and capability statement no later than 11/9/2026 @ 0900. The written response shall reference solicitation number N6893626SIMACQWPM2590163 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice shall be submitted to email: Yvonne Stockwell @ yvonne.c.stockwell.civ@us.navy.mil. All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.
62%
Pre-Solicitation11/09/2026
****0006 Please see attached amendment **** ****0005 Please see attached amendment **** ****0004 Please see attached amendment **** ****0003 Please see attached amendment **** ****0002 Please see attached amendment and revised solicitation **** ****0001 Please see attached amendment and revised solicitation **** Tools for Veteran
54%
Solicitation11/02/2026

Additional Details

Solicitation Number

47QSSC26Q0029

Archive Date

Jan 6, 2026

Office Address

Washington, DC, 20006