Notice ID: 4a4f69c2504044e4ad1a6e1f2f5d1bd8Award NoticeAwarded
Fuel Injectors - Dredge Murden
Awarded on December 16, 2026. The description is published on SAM.gov: Full description on SAM.gov.
Awarded tounder W912PM26PA021 (source: SAM.gov award notice)• $21.5K
Description
No description in the SAM.gov data feed for this notice.
Overview
Agency:
Department of WarDepartment of the Army
Office:US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTH ATLANTIC.ENDIST WILMINGTON.W074 ENDIST WILMINGTON
Posted:December 16, 2025
NAICS:333618: Other Engine Equipment Manufacturing
Last Updated:Aug 21, 2026
PSC:4930: LUBRICATION AND FUEL DISPENSING EQUIPMENT
Set-Aside:Total Small Business Set-Aside (FAR 19.5)
Type:Award Notice
Place of Performance:Wilmington, North Carolina, 28401
Award Date:Dec 16, 2026
Award Amount (SAM.gov award notice):$21.5K
Award Overview
Award Number
W912PM26PA021
Award Amount (SAM.gov award notice)
$21.5K
Award Date
Dec 16, 2026
Awardee
Awardee UEI
X5STZNQQYAT9
Awardee CAGE Code
9EF17
Awardee Address
Flushing, NY 11367, UNITED STATES
Original Solicitation
Notice ID: 4a4f69c2504044e4ad1a6e1f2f5d1bd8
Posted Date: Dec 16, 2025
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
W912PM26QA007- Awarded
This opportunity has been awarded.
- AwardedCurrentDec 16, 2025
Fuel Injectors - Dredge Murden
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
The 15-foot offset flex arm rotary cutter requires heavy-duty 11L by 15, 12-ply tires with a minimum load capacity of 4,000 pounds. It must be capable of cutting directly in-line with the tractor or at any offset distance up to 122 inches (10.16 feet). The assembly requires a minimum two-and-a-half-inch castor pivot shaft, six-bolt hubs with at least a 6,000-pound capacity, and bolt-in replaceable axles. Major pivot points must utilize spring steel tension bushings and induction-hardened pins. Hydraulic and mechanical requirements include a minimum of four hydraulic circuits with independent wing lift for the 15-foot mower, a heavy-duty three-and-a-half by 36-inch welded hydraulic cylinder, and an optional six-port selector valve kit for independent wing action on tractors with limited hydraulic outlets. Power delivery requires a minimum rating of 200 horsepower at 1,000 RPM while accommodating 540 RPM power delivery from the tractor. A safety lighting kit is also required. Standard travel dimensions must maintain a maximum width of 70 inches to the left of the tractor and 52 inches to the right, totaling 121 inches for the arm and rotary cutter assembly. When operating with the stop block installed on the transport lock bar designed to improve clearance for oncoming traffic on narrow roads the dimensions are configured to 55 inches to the left of the tractor and 66 inches to the right (totaling 121 inches). | Combined Synopsis | 333618 | Total Small Business Set-Aside | 09/09/2026 | 09/16/2026 | - | |
The requirement is for a Category II, three-point hitch boom mower (KWT 550 or equivalent) that is fully compatible with a Kubota M6-111 tractor (114 horsepower, 9,600 pounds). The boom mower must feature a maximum reach of 20 feet, a maximum transport height of 11.5 feet, and a maximum transport width of 6.5 feet. The hydraulic system requires a minimum 50-gallon oil tank capacity, integrated temperature and oil level indicators, a hydraulic safety breakaway device, a hydraulic lock, and quick-connect fittings. It must also include any additional auxiliary pumps and valves necessary to ensure complete mounting and operation on the specified Kubota tractor. For standalone storage and transport, the unit must include adjustable leg supports capable of supporting the assembly when dismounted, as well as a rear-facing road lighting kit. The cutting assembly requires a flail head attachment (KW126 or equivalent) with a minimum four-foot working width and a total weight under 650 pounds. The unit must utilize Type VI flail knives and include two full replacement sets. The deliverable also requires two copies each of the service, parts, and operator���������s manuals, with final delivery to Fort Drum, New York. | Combined Synopsis | 333618 | Total Small Business Set-Aside | 09/09/2026 | 09/16/2026 | - | |
Fully welded top deck. Gearbox seal protection. 6-inch blade overlap. Welded top deck. Cut brush and saplings up to 3-inch. Must have a stump jumper, backed with a 1-inch thick mounting bar. Self-leveling pull-type hitch. Rear facing LED signal lights. 1 right side hinged wing section. 1-inch solid hinge rods. Wing transport lock. 1-inch enclosed front to rear dual leveling rods. 5-inch square rear axle tubing. 540 rpm: center: 17,377 fpm (88.3 mps), wings: 17,329 fpm (88 mps). 1000 rpm: center: 18,165 fpm (92.3 mps), wings: 18,317 fpm (93.1 mps). Spring-cushioned on center-axle. Bar-tite hitch. 1/2-inch x 3-inch welded deck ring. Airplane tires with foam filling. 10 year limited gearbox warranty. | Combined Synopsis | 333618 | Total Small Business Set-Aside | 09/03/2026 | 09/10/2026 | - | |
Hawkway Industries HS9 Oil Filter Crusher | Combined Synopsis | 333618 | Total Small Business Set-Aside | 08/24/2026 | 08/27/2026 | - | |
Water Pump Kit | Combined Synopsis | 333618 | Total Small Business Set-Aside | 08/19/2026 | 08/26/2026 | - |
Additional Details
Solicitation Number
W912PM26QA007
Archive Date
May 31, 2026
Office Address
WILMINGTON, NC, 28403-1343