Notice ID: 90fe7f88df854f7eb6c5fc029d33046bCombined Synopsis/Solicitation
PROVIDE CNC PLASMA SYSTEM FOR IPF DETROIT
Archived on March 3, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM UTC−05:00
- Posted
- February 9, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- 8(a) Set-Aside (FAR 19.8)
- NAICS
- 333248: All Other Industrial Machinery Manufacturing
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- SFLC PROCUREMENT BRANCH 1(00080)
- Place of performance
- Detroit, MI, 48207
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 52000QR230002729
- Notice ID
- 90fe7f88df854f7eb6c5fc029d33046b
Description
PROVIDE CNC PLASMA SYSTEM FOR IPF DETROIT This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information in this notice. This solicitation is issued as a Request for Quote Number 52000QR230002729. This number is for tracking purposes only. This requirement is for full and open competition. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 333248. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: The contractor shall provide pricing for the following: A. REQUIREMENT: CNC PLASMA CUTTER 1. The Vendor shall provide a item(s), service, and/or both in accordance with the attached statement of work and the solicitation description or equal to substitute. 2. Delivery Location: USCG IPF DETROIT 110 MOUNT ELLIOTT ST DETROIT, MI 48207-4380 ATTN: LUKE WOOLUM 3. REQUIRED DELIVERY DATE: 30 60 DAYS FROM AWARD RECEIVED Time: 0800 - 1500 NOTE: The USCG/Government reserves the right to Award on an All or None Basis that is the Government may issue a Purchase Order (PO) to the Offeror that submits the lowest aggregate price rather than issue a Purchase Order to each Offeror on the basis of the lowest Quotation on each item. As stated below, the provision at FAR 52,212-2, Evaluation-Commercial Items-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm fixed price contract using simplified acquisition procedures in accordance with FAR Part 13.5. 1. Please provide any warranty information. 2. Vendors MUST be registered in www.sam.gov The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conformed to the solicitation which will be most advantageous and the Best Value to the Government, price and other factors considered. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Quotations must be submitted on company letterhead stationery and must include the following information ( 1) Cost Breakdown, (2) Unit Cost, (3) Extended Price, (4) Total Price, (5) Payment Terms, (6) Discount offered for prompt payment, (7) Company DUNS and Cage Code. Please email quotes to the Primary and Secondary Contact. Any questions or concerns regarding any aspect of the RFQ must be forwarded via email to Contracting Officer, SKC Bobby Griffin Bobby.R.Griffin@uscg.mil The following FAR Clauses and Provisions apply to this acquisition: FAR 52.212-1 - Instructions to Offerors - Commercial Items (Oct 2018) FAR 52.212-2 - Evaluation - Commercial Items (Oct 2014) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Items (Oct 2018) to include Alt I (Oct 2014). Offeror is to complete the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.sam.gov . FAR 52.212-4 - Contract Terms and Conditions -Commercial Items (Oct 2018) with the following addenda's. FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Jan 2019) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998), the full text of the clause may be accessed electronically at Internet address http://farsite.hill.af.mil/vffara.htm; A Data Universal Numbering System (DUNS) Number is the primary identifier in FAR 52.204-7 - System for Award Management (Oct 2018). Contractors are located and identified in SAM by their DUNS number. To facilitate payment via Electronic Funds Transfer - SAM, contractors should be registered in SAM. A DUNS number can be obtained via www.dnb.com and SAM registration can be obtained via www.sam.gov. The following Clauses and others as indicated by the Contracting Officer as applicable shall apply to this awarded contract. FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998), the full text of the clause may be accessed electronically at Internet address http://farsite.hill.af.mil/vffara.htm; A Data Universal Numbering System (DUNS) Number is the primary identifier in FAR 52.204-7 - System for Award Management (Oct 2018). Contractors are located and identified in SAM by their DUNS number. To facilitate payment via Electronic Funds Transfer - SAM, contractors should be registered in SAM. A DUNS number can be obtained via www.dnb.com and SAM registration can be obtained via www.sam.gov. The following Clauses and others as indicated by the Contracting Officer as applicable shall apply to this awarded contract. FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Jan 2018) FAR 52.222-21 - Prohibition of Segregated Facilities (Apr 2015) FAR 52.222-26 - Equal Opportunity (Sep 2016) FAR 52.222-35 - Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212) FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793) FAR 52.222-37 - Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212) FAR 52.222-50 - Combating Trafficking in Persons (Jan 2019) FAR 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) FAR 52.225-1 - Buy American Supplies (May 2014) FAR 52.225-13 - Restrictions on Certain Foreign Purchases (Jun 2008) FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) *The above/following clauses are incorporated by reference, entire clause(s) available at http://www.arnet.gov/far. *The above/following clauses are incorporated by reference, entire clause(s) available at http://www.arnet.gov/far. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, Central Contractor Registration and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a) Prospective contractors shall complete electronic annual representations and certifications SAM accessed via https://www.acquisition.gov. Please ensure completion prior to submission of your quote. Also note that paragraph (b) of FAR 52,204-8 applies.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
52000QR230002729- Combined Synopsis
- Combined SynopsisCurrentFeb 9, 2023
PROVIDE CNC PLASMA SYSTEM FOR IPF DETROIT
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
GasFlow DLP Printing Interface, developed by scientists at Los Alamos National Laboratory, helps resin-based 3D printing systems produce finer details, faster builds and more consistent part quality by controlling oxygen where curing happens most critically. The open-surface approach fits well with bottom-up DLP and related vat photopolymer processes, and it can enhance existing printer designs, as well as new platforms, by improving print fidelity, process stability and material flexibility. How it Works The system adds a second liquid beneath the printable resin inside the vat, creating a stable fluid-fluid interface between the two liquids. This interface is where the resin is polymerized, removing the need to pull the polymerized layer off the surface - an inherent default in the DLP process. The lower liquid is chosen to be an immiscible, high-density fluid, such as a perfluorinated fluid, that is treated with an inert gas and circulated continuously during printing. As it flows beneath the resin and above the transparent vat window, the lower liquid removes oxygen from the resin and introduces inert gas in its place, which reduces oxygen inhibition at the curing zone. With less oxygen interfering with polymerization, projected light can cure smaller features more reliably, more quickly and more uniformly across the part with less bleeding. Technical Description The patented GasFlow DLP Printing Interface is designed for additive manufacturing methods such as DLP, SLA and related photopolymer printing processes. The GasFlow DLP Printing Interface uses a first container or vat with a transparent portion, a first fluid positioned against that transparent portion and a second fluid that serves as the printable resin. The first fluid and second fluid form a fluid-fluid interface, with the first fluid located between the vat window and the resin. A circulation system moves the first fluid through the vat and an associated treatment container by way of conduits and a pumping mechanism. In representative embodiments, the first fluid is a perfluorinated solvent that has been treated with an inert gas such as nitrogen, helium, argon or carbon dioxide. As the treated first fluid circulates, it removes oxygen from resin at the interface and helps replace that oxygen with inert gas, which improves polymerization performance at the print surface. Oxygen in standard resin systems can suppress curing, which means more energy is required than necessary which in turn can create uneven polymerization that leaves parts overcured in some regions and undercured in others making very small features difficult to print. Features below about 50 microns in diameter may fail to print when normal oxygen levels are present. GasFlow DLP Printing demonstrated print speed improvement of at least one-third, with larger gains considered possible under optimized conditions. An added benefit to flowing fluid is that the system can provide temperature-control to help manage heat buildup during printing, which can improve part quality and widen the range of usable resin chemistries. Advantages Produces finer features and higher print resolution Reduces oxygen-related defects during curing Speeds printing compared with standard setups (oxygen exposed) Improves consistency across the part, including edge-to-center uniformity Supports retrofit potential for many bottom-up DLP printers Increases lifetime of liquid resin May enable use of resin chemistries that are otherwise difficult to process because of overheating or curing instability Market Applications Additive Manufacturing (resin 3D printers, printer upgrades, production platforms) Industrial Manufacturing (precision polymer parts, lightweight structures, fabrication tooling) Medical and Dental (custom polymer components, device fabrication, detailed models) Electronics and Microfabrication (fine-feature polymer structures, patterned parts, prototyping) Research and Laboratory Equipment (materials development, process testing, advanced printing systems) Aerospace and Defense (complex geometries, lattice structures, specialty components) TRL 4 US Patent No. 11,911,955 LA-UR-26-29477 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 04/06/2027 |
See solicitation and it's attachments | - | Solicitation | 11/19/2026 |
The 76th CMXG Maintenance Group is looking for an AMT Equipment Maintenance and shall meet the specifications refereced below and in the attachment. 1. Period of Performance: The Contractor shall provide a Base Year and 2 Option Years 2. AMT HyperCare Maintenance Agreement (Applicable to: SF100, S/N: 4149003000751): This plan shall include, at a minimum: a) Support Help Desk Access: Direct access to AMT's expert support team for troubleshooting. b) Unlimited Service Visits: Covers all service visits due to machine errors (operator errors are excluded). c) Unlimited Parts Replacement: Covers replacements for parts that fail due to machine error. d) Ancillary Coverage: Coverage extends to included ancillary systems. e) Yearly Preventative Maintenance (PM): Schedule and perform one (1) comprehensive on-site PM inspection and optimization visit per contract year. 1) Annual Carbon Filter Replacement: Supply and install replacement carbon filters during the scheduled annual PM visit to maintain safety and efficiency 2) The Contractor shall provide a copy of the annual preventative maintenance (PM) schedule to the Government Point of Contact (GPOC) within ten (10) business days after contract award. 3) The Contractor shall notify the GPOC at least seven (7) business days prior to the actual scheduled PM visit to coordinate on-site arrival and base access. f)The Contractor shall be responsible for ensuring all services, replacement parts, and OEM components provided under this contract conform to the manufacturer's equipment specifications and are in accordance with (IAW) the terms and conditions outlined in this SOW. g) The Contractor must meet all requirements outlined IAW this SOW. h) The Contractor shall make all necessary adjustments to the work performed under the AMT Equipment Maintenance Service Agreement until the item/s are fully operational IAW the Original Equipment Manufacturer (OEM) specifications and to what is stated in this SOW. 3. One-Time PM Reinstatement Kit (Base Year Only) SF100, S/N: 414900300075 is currently out of warranty, Contractor shall provide all parts and labor required to allow equipment to be put on Hypercare Maintenance Agreement. | - | Market Research | 10/30/2026 |
Electrically Heated Tank | - | Combined Synopsis | 10/29/2026 |
the purpose of this Modification is to cancel this Solicitation | - | Combined Synopsis | 06/08/2026 |
Additional Details
Solicitation Number
52000QR230002729
Archive Date
Mar 3, 2023
Office Address
NORFOLK, VA, 23510