GovChime
Notice ID: 539440e9bf5044ae97dd0e7b6260992aCombined Synopsis/Solicitation

ISR Drone Tethering Systems

Responses closed . Full description on SAM.gov.

Overview

Response deadline
1:35 PM CDT
Posted
July 15, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
Fort McCoy, WI, 54656
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U3581
Notice ID
539440e9bf5044ae97dd0e7b6260992a

Description

Amendment made to extend closing date due to three contracts closing on the same day and additional time need for evaluation.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/Solicitation

    ISR Drone Tethering Systems

    Notice 884efe258aaa429589de7a1cdce3febb on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationCurrent

    ISR Drone Tethering Systems

    Notice 539440e9bf5044ae97dd0e7b6260992a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Reason for amendment update is to add TSBSA and extend response date for ISR Drone Tethering System for Parrot UKR and Parrot ANAFI
100%
Combined Synopsis06/29/2026
The Naval Air Systems Command (NAVAIR), V-22 Joint Program Office (PMA-275) intends to negotiate and issue a delivery order under a Basic Ordering Agreement to the Bell Boeing Joint Program Office, 401 Tiltrotor Drive, Amarillo, TX 79111 on a sole-source basis for: The V-22 FCS Enhanced Capability will include the following safety and capability-driven technology improvements to the aircraft: Level I handling qualities in critical mission tasks, tactile cueing of aircraft operating limits, and Hands-On Throttle and Stick (HOTAS) control of FCS modes. This action is being awarded on a sole source basis to the Bell Boeing Joint Program Office in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C. 2304(c)(1), as implemented by FAR Part 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Bell Boeing is the sole designer, developer, and producer of the V-22 Tiltrotor aircraft and is the only known source that possesses the requisite knowledge and expertise required to perform this effort. Also, Bell Boeing is the only source that possesses the totality of engineering and technical data required to perform these efforts. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, any capability statements received within fifteen days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. For possible subcontracting opportunities, please contact Jen McKeon at jennifer.m.mckeon@boeing.com or Shari Askew at supplierdiversity@bh.com
69%
Combined Synopsis11/20/2026
The Naval Air Systems Command (NAVAIR), V-22 Joint Program Office (PMA-275) intends to negotiate and issue a delivery order under Basic Ordering Agreement N00019-26-G-0001 to BAE Systems Controls, Inc. 1098 Clark St. Endicott, NY 13760-2815 on a sole-source basis for: Flight Control System (FCS) Redesign Retrofit Recurring Effort; kits and spares. This action is being awarded on a sole source basis to the BAE in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C. 2304(c)(1), as implemented by FAR Part 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." BAE is the only known source that possesses the requisite knowledge and expertise required to perform this effort. Also, BAE is the only source that possesses the totality of engineering and technical data required to perform these efforts. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, any capability statements received within fifteen days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. For possible subcontracting opportunities, please contact Sam Williams at sam.c.williams@baesystems.us
68%
Combined Synopsis11/10/2026
Synopsis ACTION CODE: Pre-Solicitation Synopsis DATE: 28 Oct YEAR: 2026 CONTRACTING OFFICE ZIP CODE: 35898 NAICS CODE: 336413 CONTRACTING OFFICE ADDRESS: U.S. Army Aviation and Missile Command (W58RGZ) ATTN: CCAM-AVA-B, Building 5303, Martin Road Redstone Arsenal, AL 35898-5280 (US) SUBJECT: Purchase of the Wiring Harness, Branched SOLICITATION NUMBER: W58RGZ-27-Q-A001 CLOSING RESPONSE DATE: 12 Nov 2026 CONTRACTING OFFICER: Edward Peterson, email: edward.a.peterson4.civ@army.mil PLACE OF PERFORMANCE: Contractor’s Facility DESCRIPTION: The contractor shall provide the Wiring Harness Branched for purchase. The following information is provided: NOMENCLATURE: Wiring Harness, Branched NSN: 6150-01-463-9806 P/N: 406876- 01 This item is a non-commercial item ESTIMATED QUANTITY RANGE: Minimum 22 each – Maximum 78 each The proposed contractual action will be a spare award, Firm Fixed Price (FFP), five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract, with minimum / maximum quantities listed above. This is a non-critical safety item. Required delivery shall be FOB Origin. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. The following contractor is the only known source: BAE Systems Controls, Incorporated; CAGE Code 89954; UEI: M5HBU5ZXNN81; Large Business for NAICS Code 336413 The Government does not have the necessary access to the technical data needed to complete the requirement. All companies that can provide these items are encouraged to identify themselves. POCs for this action are the Contracting Officer, Edward Peterson, email: edward.a.peterson4.civ@army.mil and the contract specialist Ms. Mariel Chambers, email: mariel.l.chambers.civ@army.mil. Award will be withheld pending receipt of sufficient funds. The closing date annotated is an estimated date and may be adjusted depending upon the date of release of the solicitation; however, the solicitation will not close prior to the closing date stated above. SET ASIDE STATUS: NA
65%
Pre-Solicitation11/12/2026
Issue Date: 12 November 2026 Closing Date: 27 November 2026 - 2:00 PM ET This notification is connected to previous synopsis and solicitation N0016423RWS68. The purpose of this Request For Information (RFI) is to notify industry of the Government’s intent to announce a forthcoming solicitation via the Procurement Integrated Enterprise Environment (PIEE) module. The announcement will involve rolling admission potential to award additional MAC Indefinite Delivery Indefinite Quantity contracts to Small Business Concerns, as well as a possible ceiling increase from $30M to $120M due to emergent requirements. The Statement of Work (SOW) and scope of the requirement remains unchanged, with the original SOW attached to this RFI for reference. REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT - The Government is issuing this RFI/SS announcement as part of a market research effort on behalf of Crane Division, Naval Surface Warfare Center (NSWC Crane) and is seeking information for market research purposes relative to capabilities available to support the manufacturing of Machine and Composite Parts, along with Additive Manufacturing (3D Printing). These manufacturing efforts will support components related to EA18G Growler and P-8A Poseidon aircraft, as well as various other related platforms. The purpose and objective of this announcement is to find highly qualified fabrication facilities with expertise in the following areas: Precision machining operations such as sawing, grinding, turning, and milling of both metallic and non-metallic materials Welding, fabrication, and assembly of metallic and non-metallic materials and components to produce completed assemblies in accordance with drawings or 3-D models and within the defined tolerances Other various machine shop services including, but not limited to, water jet cutting, plasma & laser cutting, hot and cold forming, tool & die fabrication, as well as inspection & certification. Composite capabilities such as autoclave operations, prepreg and wet lay-up operations, grinding, sanding, patching/repair work, debulking, testing, and certification of materials and adhesives. Additive Manufacturing capabilities that include 3D printing of various polymer and metal components, and the ability to document the process. Interested parties are strongly encouraged to submit an initial synopsis (commonly referred to as “white paper”. This white paper should not exceed 20 pages written (Times New Roman, 12 font) or MS PowerPoint slides, (excluding supporting information such as commercial literature, catalogues, manuals, vendor’s current equipment list, responses to Government’s market research questions, etc.), with an executive summary (one page or less) on their capabilities. A draft Statement of Work is provided as an Attachment to aid interested sources in understanding the scope of work that may be executed under this potential procurement. Contractors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. This announcement does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the Government to issue a formal solicitation or ultimately award a contract. The U. S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed. Any information provided that is marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities. The Government may elect to visit, or host a visit, from any potential sources following the market survey. Your interest in this program is appreciated. Responses from Small and Small Disadvantaged Business firms are highly encouraged. Firms responding should indicate if they are a small business, a socially and economically disadvantaged business, 8(a) firms, historically black colleges or universities, and minority institutions. Responses to the RFI shall include the following: Submitter's Name Street Address, City, State, nine (9) digit Zip Code Point of Contact (POC) POC Telephone and facsimile numbers Announcement Number: N0016427SNC15 Unique Entity Identification number Current CMMC level in accordance with 252.204-7025 Notice of Cybersecurity Maturity Model Certification Level Requirements White papers and/or any associated questions may be submitted any time prior to expiration of this announcement, but shall be received by the Government no later than the closing date and time 27 November 2026 at 2:00PM ET. Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their responses. The Government will not be liable, or suffer any consequential damages, for any proprietary information not properly marked and clearly identified. Proprietary information received in response to this RFI/SS will be safeguarded and handled in accordance with applicable Government regulations. In addition, if responses include technical requirements that have been identified as CUI in accordance with NIST SP 800-171, the documents shall be identified with the appropriate category markings. See https://www.archives.gov/cui/registry/category-marking-list for guidance. All information received in response to this notice that is marked proprietary will be handled accordingly. NSWC Crane makes no implied or in fact contracts by issuing this RFI. Acknowledgement of receipt of responses will not be made, nor will respondents be notified of the NSWC Crane’s view of the information received. Do not send any material that requires a non-disclosure agreement or identify information that is business sensitive. Responses to this notice will not be returned. All information provided becomes U.S. Navy property and will not be returned. Your interest in this response is appreciated. Electronic submissions only, no hard copy submissions will be accepted. Electronic submissions regarding this announcement may be directed to Ms. Shannon Reinhart, Phone: (812) 381-7166, E-mail: shannon.l.reinhart.civ@us.navy.mil. Please refer to announcement number N0016427SNC15 in all correspondence and communication.
61%
Market Research11/27/2026

Additional Details

Solicitation Number

W911S226U3581

Archive Date

Jul 15, 2027

Office Address

FORT DRUM, NY, 13602-5220