TECHNOLOGY TRANSFER LICENSING OPPORTUNITY: Space Suit RoboGlove (SSRG) (MSC-TOPS-80)
Active, responses due . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM CST
- Posted
- March 23, 2026
- Notice type
- Special Notice
- NAICS
- 927110: Space Research and Technology
- Agency
- National Aeronautics and Space Administration
Notice details
- Office
- NASA MARSHALL SPACE FLIGHT CENTER
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- T2P-JSC-00066
- Notice ID
- 5ddd27e773fe4ce5971490f0c6fca94f
Description
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses.
THE TECHNOLOGY:
Innovators at NASA Johnson Space Center (JSC) have created an enhanced second-generation, robotically assisted extravehicular activity (EVA) glove. The SSRG has been engineered to further decrease the exertion required to do complex, hand-intensive EVA tasks and reduce the risk of astronaut hand injury. Originating from its predecessors, the NASA/General Motors RoboGlove, and the later first-generation Space Suit RoboGlove, the SSRG realizes improved sensing, control, interface, and avionics capabilities. Among these improvements is the implementation of a “power steering mode”, which allows the user to position his/her fingers in an arbitrarily chosen position and receive assistance in holding that position. The SSRG retains the ability to operate like a conventional space suit glove while the actuators are unpowered. The design intent for the SSRG is to enhance a user’s ability to perform human scale work, with considerations for speed, power, durability, dexterity, and ease of operation.
To express interest in this licensing opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/MSC-TOPS-80
If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/.
These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 1Version 1Special NoticeCurrent
TECHNOLOGY TRANSFER LICENSING OPPORTUNITY: Space Suit RoboGlove (SSRG) (MSC-TOPS-80)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses. THE TECHNOLOGY: NASA’s Universal Modular Interface Converter (UMIC) innovation is a bidirectional AC/DC power converter designed to connect lunar surface power assets and enable power sharing over long distances between sources (e.g. solar) and loads. The UMIC module is intended to be lightweight and readily deployable. The UMIC innovation can essentially serve as the backbone of an electrical power grid for lunar surface exploration and development missions operated by NASA or the commercial space industry. The UMIC architecture is flexible to different grid voltages and frequencies, as well as to different controller and communication systems. The NASA inventors of this technology envision it becoming a standardized system that all users can access similarly. NASA’s Universal Modular Interface Converter (UMIC) is a bidirectional, modular power electronics converter that transfers power between a 120 V DC space power bus, and a medium-to-high-voltage, three-phase AC power grid. The UMIC system contains multiple parallel AC/DC UMIC modules that convert between 120 V DC and low voltage AC, as well as one or more transformers that convert power from the low voltage AC bus to the grid voltage. The UMIC module consists of multiple subsystems, including the power stage, gate driver, Field Programmable Gate Array (FPGA)-based controller, output filter, signal conditioning and sensing circuits, and thermal management subsystems. An FPGA-based controller is included within each AC/DC module and is used to regulate desired power system variables; synchronize power switching events and share load current between modules; synchronize the modules with existing service on the grid; receive commands; and share telemetry. The FPGA-based controller subsystem includes the FPGA Integrated Circuit, associated flash memory, and a controller area network (CAN) transceiver. It is envisioned that future UMIC designs can support lunar grid expansions, a Mars surface grid, or large space stations. These applications may necessitate different grid voltages or frequencies, or different control logic and communication systems. However, the core UMIC architecture and functionality will remain the same. The related patent is now available to license. Please note that NASA does not manufacture products itself for commercial sale. To express interest in this opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/LEW-TOPS-181 If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice. | - | Special Notice | 08/24/2027 |
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses. THE TECHNOLOGY: The Lunar Reconnaissance Orbiter (LRO) employs many advanced innovations developed at Goddard and in collaboration with other organizations. The applications and benefits for these technologies are advantageous for many other industries as well. One of those technologies is the Space Link Extension Return Channel Frames (SLE-RCF) software library. This software library enables a mission control center to receive telemetry frames from a ground station. The technology implements the SLE-RCF protocol as defined by the Consultative Committee for Space Data Systems (CCSDS). Software routines can be reused from mission to mission. The Space Link Extension Return Channel Frames (SLE-RCF) software library helps to monitor the health and safety of spacecraft by enabling space agency ground support and mission control centers to develop standardized and interoperable mission control applications for space telemetry data. The software library eliminates the need for missions to implement custom data communication designs to communicate with any ground station. The two main tasks accomplished via the SLE-RCF software library are processing user requests and receiving data from ground stations and ground support assets. The software library contains three layers: -SLE (Space Link Extension) for the abstract workings of the protocol -DEL (Decoding and Encoding Layer) to decode and encode the abstract messages used by the SLE layer -TML (Transport Mapping Layer) to transfer the encoded messages via some underlying transport layer protocol, such as as the transmission control protocol (TCP) The library accepts configuration or SLE-RCF directives from the user and responds accordingly. Incoming data, both telemetry frames and status messages, are processed and the appropriate callback routines are triggered by the library. To express interest in this opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/GSC-TOPS-72 If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice. | - | Special Notice | 08/24/2027 |
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses. THE TECHNOLOGY: Next generation autonomous planetary exploration missions require advanced sensing capabilities for choosing proper landing areas for the vehicles. Current tools do not have the capability to allow vehicles outside the range of terrestrial control to autonomously perform safe landing operations. The Ocellus 3D lidar developed by the NASA Goddard Space Flight Center is a lightweight, small-footprint 3D lidar system for planetary and lunar exploration. The new 3D lidar can perform both altimetry (or range-finding) measurements from high altitudes and, at lower altitudes, terrain mapping and imaging. These measurements provide the necessary data for autonomous systems to select safe landing areas for planetary exploration vehicles. Developed to aid in the safe landing and navigation of the rotocopter for the Dragonfly mission to explore Titan, the Ocellus 3D lidar may be used for a wide variety of altimetry and terrain mapping purposes both in space and terrestrially. Aerial planetary exploration spacecraft require lightweight, compact, and low power sensing systems to enable successful landing operations. The Ocellus 3D lidar meets those criteria as well as being able to withstand harsh planetary environments. Further, the new tool is based on space-qualified components and lidar technology previously developed at NASA Goddard (i.e., the Kodiak 3D lidar) as shown in the figure below. The Ocellus 3D lidar quickly scans a near infrared laser across a planetary surface, receives that signal, and translates it into a 3D point cloud. Using a laser source, fast scanning MEMS (micro-electromechanical system)-based mirrors, and NASA-developed processing electronics, the 3D point clouds are created and converted into elevations and images onboard the craft. At ~2 km altitudes, Ocellus acts as an altimeter and at altitudes below 200 m the tool produces images and terrain maps. The produced high resolution (centimeter-scale) elevations are used by the spacecraft to assess safe landing sites. The Ocellus 3D lidar is applicable to planetary and lunar exploration by unmanned or crewed aerial vehicles and may be adapted for assisting in-space servicing, assembly, and manufacturing operations. Beyond exploratory space missions, the new compact 3D lidar may be used for aerial navigation in the defense or commercial space sectors. The Ocellus 3D lidar is available for patent licensing. To express interest in this opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/GSC-TOPS-353 If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice. | - | Special Notice | 08/11/2027 |
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses. THE TECHNOLOGY: Innovators at NASA’s Goddard Space Flight Center have developed a groundbreaking extravehicular activity (EVA)-compatible Battery Charger Module (BCM) as part of the Lunar Experiment Support System and Handling (LESSH) package. This first-of-its-kind technology is designed to provide wired battery charging capabilities to astronauts on the lunar surface or other harsh environments. With the Artemis III mission and beyond, NASA plans to deploy cutting-edge science instruments near the lunar South Pole landing site. To support extended lunar science operations, the EVA-compatible LESSH BCM offers seamless recharging and reliable hard-line data transfer at the modular interface bank on the Human Landing System (HLS) or other Artemis systems (rovers, vehicles, habitats, etc.). Engineered for astronaut ease-of-use, the LESSH BCM delivers an ergonomic interface to connect instruments to power and data systems. By combining battery charge monitoring with flexible data transfer capabilities, the BCM empowers astronauts to extend the scope and duration of operations on the Moon. The NASA invention is integral to creating a recharging infrastructure that enables sustainable, long-term lunar exploration. NASA’s LESSH BCM is a compact, high-performance, ruggedized system designed to support extended science operations in harsh lunar environments. With a mass of 9.4 kg and dimensions of 50 x 25 x 10 cm, the BCM is engineered for seamless integration with the interface bank on the HLS. A 1.5-meter flexible harness with an EVA-compatible connector and removable dust cover enables reliable operation in austere environments. Astronaut-operated controls, such as a guarded power switch and LED indicators, simplify usability and reduce the potential for errors during high-stakes lunar operations. The BCM is optimized for safety and efficiency, incorporating state-of-the-art power and charging capabilities. It supports charging of 28V astronaut-rated batteries with a power output rated at 215W and integrates a battery pre-heater to maintain optimal performance in extreme temperatures. The BCM features a 4-hour charge time with software adjustability for charging parameters such as current, voltage, overvoltage, and undervoltage setpoints. Battery longevity is ensured through passive rebalancing of cell voltages and advanced safety features. Its 2-fault tolerant hardware and adjustable safety setpoints safeguard against potential hazards. Additionally, the BCM supports 1000BASE-T Ethernet pass-through for high-speed data transfer. Originally designed to extend the length of lunar surface science experiments by enabling astronauts to recharge instrumentation, NASA’s LESSH BCM may be desired by companies seeking to operate sensors on the lunar or Martian lunar surface. The design may also be suitable for terrestrial applications involving harsh environments where interchangeable sealed sensors must operate on their own or with rovers, robotics, and drones. The BCM is at technology readiness level (TRL) 4 (component and/or breadboard validation in lab) and is available for patent licensing. To express interest in this opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/GSC-TOPS-362 If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice. | - | Special Notice | 08/11/2027 |
NASA’s Technology Transfer Program solicits inquiries from companies interested in obtaining license rights to commercialize, manufacture and market the following technology. License rights may be issued on an exclusive or nonexclusive basis and may include specific fields of use. NASA provides no funding in conjunction with these potential licenses. THE TECHNOLOGY: The NASA Johnson Space Center has developed a method for tracking collections of items in a smart container using radio-frequency identification (RFID) tags with a high level of read accuracy. Automating the tracking of a collection of items (particularly small items) represents a major industrial hurdle due to both tag size and cost. This technology promises to successfully address these hurdles. The smart enclosure innovation can track individual items in the smart containers regardless of item placement, or on conveyor belts. The technology improves the read accuracy of items moving on, for example, a conveyor belt, which in turn can enable the use of smaller, lower cost tags. The NASA patented technology is available for licensing. The smart enclosure innovation employs traditional RFID cavities, resonators, and filters to provide standing electromagnetic waves within the enclosed volume in order to provide a pervasive field distribution of energy. A high level of read accuracy is achieved by using the contained electromagnetic field levels within the smart enclosure. With this method, more item level tags are successfully identified compared to approaches in which the items are radiated by an incident plane wave. The use of contained electromagnetic fields reduces the cost of the tag antenna; making it cost-effective to tag smaller items. This NASA Technology is available for your company to license and develop into a commercial product. Potential commercial applications include inventory tracking for containers such as waste receptacles, storage containers, and conveyor belts used in grocery checkout stations. To express interest in this opportunity, please submit a license application through NASA’s Automated Technology Licensing Application System (ATLAS) by visiting https://technology.nasa.gov/patent/MSC-TOPS-72 If you have any questions, please e-mail NASA’s Technology Transfer Program at Agency-Patent-Licensing@mail.nasa.gov with the title of this Technology Transfer Opportunity as listed in this SAM.gov notice and your preferred contact information. For more information about licensing other NASA-developed technologies, please visit the NASA Technology Transfer Portal at https://technology.nasa.gov/ These responses are provided to members of NASA’s Technology Transfer Program for the purpose of promoting public awareness of NASA-developed technology products, and conducting preliminary market research to determine public interest in and potential for future licensing opportunities. No follow-on procurement is expected to result from responses to this Notice. | - | Special Notice | 08/10/2027 |
Additional Details
Solicitation Number
T2P-JSC-00066
Archive Date
Mar 14, 2027
Office Address
HUNTSVILLE, AL, 35812