Xspress 3X Mk2 Readout Systems (8 and 13 Channels)
Archived on January 22, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM CST
- Posted
- January 14, 2026
- Notice type
- Solicitation
- NAICS
- 423490: Other Professional Equipment and Supplies Merchant Wholesalers
- Agency
- Department of Energy
Notice details
- Office
- ARGONNE NATL LAB - DOE CONTRACTOR
- Place of performance
- Lemont, Illinois, 60439
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 6-S176-Q-00127-00
- Notice ID
- d6fc0c27e0954775beecd15ea87bf384
Description
Argonne National Laboratory is seeking Xspress 3X Mk2 8 and 13-channel: Readout systems for SDD or HPGe detectors, or a domestically manufactured, technically equivalent solution.
Please review the provided Statement of Work and provide a completed ANL-70, ANL-70B, and supporting documentation no later than 12:00pm CST on January 21, 2026.
Please send any questions to the Contracting Officer.
Thank you in advance for your participation.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (5)
- Download
SOW Readout-electronics_1.12.26.docx.docx
142 KBAdded in Solicitation version 3Posted - Download
ANL-70 Request for Quotation.doc
1.7 MBAdded in Solicitation version 3Posted - Download
ANL-70B Reps and Certs Long-13-JAN-2025.PDF
317 KBAdded in Solicitation version 3Posted - Download
Appendix A-71COM-22-OCT-2025.PDF
1.0 MBAdded in Solicitation version 3Posted - Download
Supplier Disposition Request.docx
48 KBAdded in Solicitation version 3Posted
Lifecycle
- 3Version 3SolicitationArchivedCurrent
Xspress 3X Mk2 Readout Systems (8 and 13 Channels)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial products prepared in accordance with FAR Part 12, Acquisition of Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. All responsible sources may submit a quotation which will be considered by the agency.Solicitation number W912P626QA031 is issued as a Request for Quotation (RFQ) for the procurement, delivery, and integration of a suite of specialized environmental, meteorological, and telemetry sensors (lake and river gauges) to replace deteriorating, obsolete instrumentation at the Chicago Harbor Lock in Chicago, Illinois.The scope consists of twenty-one (21) line items of specialized commercial hardware, software, and subscriptions, including:Specialized hydrological sensors (Accubar constant flow bubblers and PLS 500 pressure transducers)Meteorological instruments (Pluvio precipitation gauges and Lufft Ventus-UMB ultrasonic wind sensors)Wireless bridge radios and a central Sutron SatLink3 data logger/cellular transmitterAnnual software subscriptions for the Hydromet Cloud data hosting platformTo ensure complete operational interoperability, simplified maintenance routines, and immediate exchangeability of spare parts with existing USACE Chicago District telemetry networks, the procurement is restricted to brand-name equipment manufactured by OTT HydroMet Corp. and its subsidiary brands (Sutron and Lufft) in accordance with approved Brand Name Determination Control No. LRC-FY26-11. All items must be delivered and unloaded within ninety (90) days after receipt of order (ARO) to the designated delivery address in Appleton, WI.This acquisition is competed on an unrestricted, open-market basis with a Brand Name Only restriction. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The solicitation package and project specification files will be downloadable from the internet only, via the DoD Procurement Integrated Enterprise Environment (PIEE) system.Quotes MUST be submitted electronically via the PIEE Solicitation Module online submission portal at https://piee.eb.mil. No other transmission methods (including email, fax, or physical mail) will be accepted for quote submissions.IMPORTANT POLICY: Contractors are REQUIRED to be registered in the System for Award Management (SAM) AT THE TIME THEIR QUOTE IS SUBMITTED and must comply with the annual representations and certifications requirements. Registration can be completed free of charge at www.sam.gov. Contractors must register with SAM.gov prior to registering with PIEE. To register in PIEE, use the registration link: https://piee.eb.mil and follow the instructions to elect the Proposal Manager role.Please include Solicitation Number W912P626QA031 in the subject line of all email correspondence.Technical questions and inquiries must be submitted via email directly to the Contracting Officer and Contract Specialist:Contracting Officer: Sara King at sara.t.king@usace.army.milContract Specialist: Kyle Smith at kyle.d.smith@usace.army.milIn accordance with the RFQ instructions, all questions must be received via email no later than five (5) days prior to the quote submission deadline. The Government will not receive, honor, or answer any questions submitted within 5 days of the solicitation closing date. Requests for solicitation packages or responses to this solicitation made by telephone, fax, or e-mail will not be honored. | 47% | Solicitation | 09/11/2026 |
The vendor shall supply one (1) industrial-grade 1030 nm femtosecond fiber laser system suitable for precision micromachining and nonlinear material processing research at Brookhaven National Laboratory (BNL). | 44% | Combined Synopsis | 04/20/2026 |
1030 nm Femtosecond Fiber Laser System | 44% | Pre-Solicitation | 03/16/2026 |
The UltraGraph Membrane Extraction System from Los Alamos National Laboratory is a compact, modular device that separates and recovers targeted materials from liquid mixtures using an ultra-thin graphene membrane. The system achieves mass transfer performance comparable to conventional separation equipment with active areas 250 times larger. Its building-block design, chemically stable materials and compatibility with standard laboratory fittings allow it to serve a wide range of applications in chemical separations, recovery purifications and biological sample preparation. Organizations can integrate the UltraGraph system into existing laboratory infrastructure with minimal modification, reducing the cost and complexity of adoption. How it Works The UltraGraph system flows two different liquids through separate microchannels etched into quartz substrates, with a three-layer membrane positioned between them. The membrane consists of a monolayer sheet of graphene held between two porous formvar polymer films, each approximately 125 nanometers thick. The formvar layers are permeable, allowing liquid to reach the graphene surface, while the graphene itself blocks the bulk fluids but permits selected ions or particles to transfer across. Liquids can run co-currently or counter-currently depending on the separation task, enabling controlled mass transfer, ion exchange or heat exchange without the two fluids ever mixing. The assembly is secured between steel plates that compress the quartz chips and ETFE gaskets together, forming a leak-resistant seal that connects to standard screw-port fittings. Technical Description The graphene at the center of the membrane is grown via chemical vapor deposition on copper foil and transferred onto formvar support films using a proprietary process that is one to two orders of magnitude faster than conventional PMMA-based transfer methods. The formvar films have tunable porosity ranging from 20% to 60%. At approximately 125 nanometers thick with an elastic modulus of 7.8 GPa, the formvar provides sufficient mechanical support for atomically thin graphene across 100-micrometer-wide channels at flow rates up to 25 microliters per minute. The graphene layer can be functionalized with oxide groups, nanoparticles or engineered pores to adjust selectivity for specific ions or molecules. The total membrane thickness is approximately 250 nanometers, which is orders of magnitude thinner than membranes used in conventional microfluidic separation devices. The quartz microchannel substrates can be configured in patterns ranging from single channels to branching multi-channel networks and radially extending circular designs. In laboratory testing, the system achieved a pH change of approximately 4 in deionized water contacted with an organic triethylamine solution across the graphene membrane, matching the output of a commercial system whose mass transfer area was 250 times larger. The four-channel counter-current configuration demonstrated 17.4% triethylamine transfer at 15 microliters per minute, on par with that commercial benchmark. The modular stacking design allows additional substrate-membrane pairs to be layered to increase throughput without redesigning the housing, and scaling estimates project that a cylindrical multi-layer assembly could process 26 milliliters per minute across more than 1,000 channels. Because the quartz chips are reusable and the membrane materials are inexpensive to produce, the system lowers the economic discard limit for recoverable materials that might otherwise be classified as waste. Advantages High efficiency in a compact form factor — performs comparably to systems with separation areas 250 times larger Tunable selectivity — the graphene membrane can be chemically modified to target specific ions, molecules or particles Modular and scalable — additional chip-and-membrane layers can be stacked to increase capacity without a full redesign Chemically stable and radiation resistant — formvar support layers are inert to most chemicals and tolerate radiation exposure, suiting the system to demanding operating environments Low-cost and reusable components — quartz chips can be reused, membranes are inexpensive to manufacture and standard connectors simplify integration Leak-resistant design — ETFE gaskets and a compression housing address the leakage issues common in prior microfluidic membrane systems Market Applications Water Treatment and Desalination (ion removal, brine processing, contaminant filtration) Pharmaceutical and Biotechnology (drug compound purification, sample preparation, protein separation) Chemical Manufacturing (solvent extraction, chemical purification, catalyst recovery) Environmental Remediation (industrial wastewater treatment, heavy metal removal, pollution control) Medical Diagnostics and Research (blood and plasma separation, point-of-care sample processing, analytical chemistry) TRL 4 LA-UR-26-24077 US Patent No. 11,471,838 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 41% | Special Notice | 09/30/2026 |
Fermilab is seeking to procure a Leica absolute tracker (ATS800) and accessories. Please see attached for Fermilab RFP# 387869swk and associated documentation. Please ensure that you review the RFP document fully, as it outlines how to submit a complete proposal package. Important information related to this RFP: Proposal Due Date: 5pm Central, November 4, 2026 A completed SARC and PROC-FRM-466 are required with your proposal Please reach out with any questions or comments pertaining to this RFP, thank you. | 41% | Solicitation | 11/04/2026 |
Additional Details
Solicitation Number
6-S176-Q-00127-00
Archive Date
Jan 22, 2026
Office Address
Lemont, IL, 60439