CNC Ultrasonic Machining Center
Archived on June 5, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM CDT
- Posted
- May 28, 2026
- Notice type
- Solicitation
- Set-aside
- No Set aside used
- NAICS
- 333248: All Other Industrial Machinery Manufacturing
- Agency
- Department of Energy
Notice details
- Office
- ARGONNE NATL LAB - DOE CONTRACTOR
- Place of performance
- Lemont, Illinois, 60439
- Last updated
- Oct 30, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 6-S176-Q-00284-00
- Notice ID
- 9d8cd856b9244cf6bc220751e450d094
Description
PLEASE NOTE: AN ADDENDUM HAS BEEN INCORPORATED WITH THIS SOLICITATION AS OF 5/28/2026. A SIGNED COPY OF THE ADDENDUM MUST BE INCLUDED WITH YOUR OFFER.
Argonne National Laboratory is seeking a CNC Ultrasonic Machining Center based upon the technical requirements listed in "Lowest Price Technically Acceptable – Procurement Strategy, Addendum to Supplier Quote dated 05/21/2026"
All quotations shall be responsive to the terms and conditions made a part of this solicitation. Any exceptions taken shall be detailed and refer to specific Articles of the Applicable Documentation. Contractor’s work on the Argonne site is subject to compliance with the ES&H requirements identified in item 2.
*EVALUATION IS BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE CRITERIA*
Failure to submit all required documentation may result in the offer being withdrawn from further consideration. Please see the ANL-70 Request for Quotation for all required documentation.
Please return all aspects of this offer no later than 3:00pm CDT on June 5, 2026.
We are looking forward to your response.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (6)
- Download
Addendum and Acknowledgement Doc.doc
1.7 MBAdded in Solicitation version 3Posted - Download
ANL-70 Request for Quotation.doc
1.6 MBAdded in Solicitation version 1Posted - Download
Appendix A-71COM-22-OCT-2025.PDF
1.0 MBAdded in Solicitation version 1Posted - Download
ANL-366L (on-site low risk)-01-OCT-2024.PDF
307 KBAdded in Solicitation version 1Posted - Download
ANL-70B Reps and Certs Long-13-JAN-2025.PDF
317 KBAdded in Solicitation version 1Posted - Download
CNC UMC Specifications Technical Requirements_5.21.26 B Stone.doc
32 KBAdded in Solicitation version 1Posted
Lifecycle
- 1Version 1SolicitationArchived
CNC Ultrasonic Machining Center
- 3Version 3SolicitationArchivedCurrent
CNC Ultrasonic Machining Center
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This flash sinter-forging technology from Los Alamos National Laboratory enables manufacturers to produce dense, net- or near-net-shape ceramic components in minutes rather than hours or days, while cutting energy consumption by up to 90% and significantly reducing production costs. By simultaneously applying electric current, heat, and mechanical pressure, the process consolidates shaping, densification, and finishing into a single, compact operation, eliminating much of the costly machining typically required for hard, brittle ceramics. The result is faster throughput, lower capital and operating expenses, smaller equipment footprints, and improved sustainability—while also enabling superior microstructural control and access to advanced or difficult-to-sinter materials. How it Works: The technology works by placing ceramic powder into a specially designed die and then applying three inputs at once: an electric field and current, moderate external heating, and mechanical pressure. As electricity passes directly through the ceramic, it rapidly heats the material from the inside, dramatically accelerating the bonding of particles while keeping overall furnace temperatures lower than conventional methods. At the same time, controlled pressure compresses and shapes the material as it densifies, allowing the part to reach high density while already close to its final geometry. Sensors and software coordinate the electrical, thermal, and mechanical conditions in real time, enabling precise control of the process and material behavior. By integrating electrical activation and forging into a single, tightly controlled step, the system achieves fast densification and shaping that would otherwise require multiple, time-intensive processing stages. Key Advantages: Minutes-long processing: Produces dense ceramic parts far faster than conventional sintering methods. Up to ~90% energy reduction: Direct electrical heating dramatically lowers energy use and operating costs. Near-net shaping: Forms parts during densification, greatly reducing or eliminating costly post-machining. Lower total manufacturing cost: Combines forming, sintering, and finishing into a single streamlined step. Advanced material capability: Enables difficult-to-sinter and next-generation ceramics with controlled microstructures. Compact and scalable: Smaller footprint and lower power requirements support deployment from R&D to industrial production. Market Applications: Semiconductor manufacturing (high-purity ceramic components, fixtures, insulators, wear parts) Aerospace and defense (high-temperature components, protective structures, lightweight ceramic parts) Energy and nuclear (fuel cells, solid-state batteries, nuclear and high-temperature energy ceramics) Medical and dental (implants, prosthetics, precision ceramic components) Industrial and manufacturing (wear-resistant parts, tooling components, structural ceramics) Additive and advanced manufacturing (post-processing of 3D-printed ceramic parts, rapid densification of complex shapes) Development Status: TRL 3 US Patent No. 12,465,971 LA-UR-26-23345 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 05/11/2026 |
The purpose of this Commercial Solution Opportunity (CSO) is to seek out qualified vendors who have experience manufacturing an Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal. This announcement is in support of market research performed by the Army Contract Command - Rock Island to determine interest and capability to provide the supply defined within this CSO. This CSO will utilize a solicitation process authorized by RFO DFARS 212.70. Under this CSO, the DoW will be allowed to competitively procure innovative commercial items, technologies, and services. CSO procedures provide a streamlined acquisition process and simplified contract terms resulting in FAR-based contracts awarded under Part 12 Commercial Item Procedures. Both traditional and non-traditional defense contractors may be awarded contracts under this CSO. Under a CSO DoW contracting officers may competitively select quotes received in response to a general competitive solicitation, similar to a broad agency announcement, based on a review of quotes by scientific, technological, or other subject matter experts. Please provide your Reponses to the following questions below through email to Ashley Testake, ashley.e.testrake.civ@mail.mil NLT COB 14 October 2026. | - | Solicitation | 11/17/2026 |
GasFlow DLP Printing Interface, developed by scientists at Los Alamos National Laboratory, helps resin-based 3D printing systems produce finer details, faster builds and more consistent part quality by controlling oxygen where curing happens most critically. The open-surface approach fits well with bottom-up DLP and related vat photopolymer processes, and it can enhance existing printer designs, as well as new platforms, by improving print fidelity, process stability and material flexibility. How it Works The system adds a second liquid beneath the printable resin inside the vat, creating a stable fluid-fluid interface between the two liquids. This interface is where the resin is polymerized, removing the need to pull the polymerized layer off the surface - an inherent default in the DLP process. The lower liquid is chosen to be an immiscible, high-density fluid, such as a perfluorinated fluid, that is treated with an inert gas and circulated continuously during printing. As it flows beneath the resin and above the transparent vat window, the lower liquid removes oxygen from the resin and introduces inert gas in its place, which reduces oxygen inhibition at the curing zone. With less oxygen interfering with polymerization, projected light can cure smaller features more reliably, more quickly and more uniformly across the part with less bleeding. Technical Description The patented GasFlow DLP Printing Interface is designed for additive manufacturing methods such as DLP, SLA and related photopolymer printing processes. The GasFlow DLP Printing Interface uses a first container or vat with a transparent portion, a first fluid positioned against that transparent portion and a second fluid that serves as the printable resin. The first fluid and second fluid form a fluid-fluid interface, with the first fluid located between the vat window and the resin. A circulation system moves the first fluid through the vat and an associated treatment container by way of conduits and a pumping mechanism. In representative embodiments, the first fluid is a perfluorinated solvent that has been treated with an inert gas such as nitrogen, helium, argon or carbon dioxide. As the treated first fluid circulates, it removes oxygen from resin at the interface and helps replace that oxygen with inert gas, which improves polymerization performance at the print surface. Oxygen in standard resin systems can suppress curing, which means more energy is required than necessary which in turn can create uneven polymerization that leaves parts overcured in some regions and undercured in others making very small features difficult to print. Features below about 50 microns in diameter may fail to print when normal oxygen levels are present. GasFlow DLP Printing demonstrated print speed improvement of at least one-third, with larger gains considered possible under optimized conditions. An added benefit to flowing fluid is that the system can provide temperature-control to help manage heat buildup during printing, which can improve part quality and widen the range of usable resin chemistries. Advantages Produces finer features and higher print resolution Reduces oxygen-related defects during curing Speeds printing compared with standard setups (oxygen exposed) Improves consistency across the part, including edge-to-center uniformity Supports retrofit potential for many bottom-up DLP printers Increases lifetime of liquid resin May enable use of resin chemistries that are otherwise difficult to process because of overheating or curing instability Market Applications Additive Manufacturing (resin 3D printers, printer upgrades, production platforms) Industrial Manufacturing (precision polymer parts, lightweight structures, fabrication tooling) Medical and Dental (custom polymer components, device fabrication, detailed models) Electronics and Microfabrication (fine-feature polymer structures, patterned parts, prototyping) Research and Laboratory Equipment (materials development, process testing, advanced printing systems) Aerospace and Defense (complex geometries, lattice structures, specialty components) TRL 4 US Patent No. 11,911,955 LA-UR-26-29477 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 04/06/2027 |
Engineered Porous Print Materials enables manufacturers to produce complex, high-surface-area structures with precisely engineered porosity at macro, micro and nano scales — all from a single printable composition and a standard stereolithography printer. By eliminating the need for secondary coatings, multi-step mold processes or specialized equipment, this technology developed by Los Alamos National Laboratory simplifies the production of advanced porous materials while opening design possibilities that conventional fabrication methods cannot achieve. Organizations seeking to improve the performance of catalytic reactors, filtration systems, thermal management devices, energy storage components or biomedical scaffolds, to name a few, can now access a versatile, low-cost platform that translates digital designs directly into functional, multi-material foam structures with tunable chemistry and architecture. How it Works The process begins with a specially formulated resin that contains three key ingredients mixed together: a polymer precursor that can be hardened by light, a porogenic solvent that induces phase separation during hardening, and a structural precursor (such as a metal salt or ceramic precursor) that will ultimately form the skeleton of the final part. When loaded into a commercial SLA 3D printer, the resin is cured layer by layer using light, producing a printed intermediate structure composed of a nanoporous polymer gel with the structural precursor distributed uniformly throughout. Post-printing processing — which may include controlled heating, chemical reduction or catalytic treatments depending on the target material — converts the structural precursor into the desired solid (metal, ceramic or carbon) while decomposing and removing the polymer gel. The spaces formerly occupied by the polymer gel become a second, finer tier of porosity nested inside the larger pores defined by the printed geometry, and additional processing steps such as de-alloying can introduce a third, nanoscale tier of porosity. The entire workflow uses a single resin formulation with no need to add coatings or secondary materials after printing. Technical Description The printable composition is engineered so that the polymer precursor component (typically an acrylate monomer such as polyethylene glycol diacrylate) undergoes photopolymerization in the presence of a porogenic solvent (such as dimethylformamide or water) that is deliberately chosen for its low compatibility with the resulting polymer network. During curing, the polymer phase-separates from the solvent, creating a sponge-like gel with pore sizes and volumes that can be tuned by adjusting the solvent-to-monomer ratio, solvent chemistry and the inclusion of structure-directing additives. A photoinitiator and a polymerization quenching compound (an absorber dye) are included to control layer thickness and prevent unwanted curing beyond the intended print pattern. The structural precursor — which can be a dissolved metal salt, a pre-ceramic alkoxide, a carbonaceous precursor or a pre-metal oxide — is homogeneously incorporated within the gel phase during printing, enabling an “inside-out” assembly of the final material, or could be absorbed through wicking into the porous, spongelike material before post processing. After printing, downstream thermal and chemical treatments convert the structural precursor into the target material and remove the polymer template. For metal-based products, heating reduces metal ions to colloidal particles within the gel; further sintering fuses those particles into a continuous metallic skeleton while the polymer decomposes, leaving behind a free-standing porous metal replica of the original printed geometry. Isotropic shrinkage during polymer removal can reduce feature sizes well below the printer's native resolution, enabling structural details that conventional SLA cannot achieve on its own. Demonstrated material systems include silver, gold (with trimodal porosity achieved through silver-gold de-alloying), silica, boron carbide, copper, iron and cobalt oxide. Pore diameters span from greater than one millimeter at the macro scale down to below 100 nanometers at the nano scale, and all pore networks remain interconnected and accessible throughout the bulk of the part. Advantages Single-resin workflow instead of multiple coating steps Multi-scale porosity in one printed part Works across several material types Compatible with standard stereolithography equipment Internal pores stay connected and accessible Pore size and density can be adjusted through formulation and processing Market Applications Catalysis (reactor supports, flow-through catalyst bodies) Energy Storage (battery electrodes, capacitor structures) Thermal Management (heat exchangers, heat pipe wicks, cooling components) Filtration and Separations (fluid filters, gas scrubbers, purification media) Biomedical (bone scaffolds, culture substrates) Lightweight Structures (reinforcement, insulation, fire protection parts) U.S. Patent Nos. 11,267,920; 12,054,569; pending LA-UR-26-23577 TRL 4 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 06/04/2026 |
PLEASE NOTE: AN ADDENDUM HAS BEEN INCORPORATED INTO THIS SOLICITATION. PLEASE PROVIDE ONE SIGNED COPY OF ALL RELATED ADDENDUMS WITH ANY FINAL PROPOSAL. CHANGES IN BOLD BELOW. More documentation to follow. Argonne National Laboratory (ANL) seeks a Supplier to design, fabricate, deliver, support installation, and commission a custom industrial furnace for R&D testing of fuel-flexible burners using natural gas and hydrogen blends from 0–100% H₂. The furnace shall support direct-fired and indirect-fired burner configurations and meet all requirements in the attached Statement of Work, including performance, facility interfaces, applicable codes, and safety requirements. Award will be made on a BEST VALUE basis. Technical acceptability will be evaluated on AN ADJECTIVAL SCALE. BUSINESS PROPOSALS WILL BE EVALUATED ON PASS/FAIL. Among responsible offerors determined technically acceptable and compliant with solicitation requirements, ANL will award to the offeror with the best overall value, where the Technical Proposal is of greater importance to the Price Proposal and Business Management Proposal. Offerors shall submit: Completed and signed ANL-70 Request for Quotation. Technical compliance response addressing each Statement of Work requirement, with supporting evidence. Country of Origin information for the furnace and major components. Lead time from PO through final delivery, FOB Destination, Lemont, IL 60439, including major design, fabrication, delivery, and commissioning milestones. Completed and signed ANL-70B Representations and Certifications. Any proposed exceptions or deviations. All proposal documentation requested under Best Value Criteria (to be added) Offers that do not meet mandatory requirements or do not provide adequate supporting documentation may be found technically unacceptable. Country of Origin shall be provided in accordance with FAR 52.225-1, Buy American—Supplies. Please direct questions to the Contracting Officer. Thank you in advance for your participation. | - | Solicitation | 12/01/2026 |
Additional Details
Solicitation Number
6-S176-Q-00284-00
Archive Date
Jun 5, 2026
Office Address
Lemont, IL, 60439