GovChime
Notice ID: 62d52818528f4df4bfe3c8a233f02975Combined Synopsis/Solicitation

55HP Submersible 2 Stroke Boat Motor

Responses closed . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EDT
Posted
July 9, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333618: Other Engine Equipment Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
Place of performance
Key West, FL 33040, 33040
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911S226U3649
Notice ID
62d52818528f4df4bfe3c8a233f02975

Description

55HP 2-stroke, gasoline, submersible, air-deployable outboard motor designed as a self-contained propulsion system for small craft applications. Engine must be qualified for CRRC airdrop configurations. Must include features such as through-hub exhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering capability, rapid post-submersion operability. Engine must have an EPA 3 star on gasoline or higher. Engines must be brand new and domestically manufactured and actively managed in the DLA Federal logistics system under an established National Stock Number (NSN). With essential consumables and service accessories required to support engine break-in, fuel preparation, flushing, corrosion prevention, and long-term storage of the boat motor. Kit must include a 10-foot fuel line assembly with primer bulb, XD10-oil, universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate with mixing unit. This kit must support the fuel-mixing, flushing, and storage practices prescribed in the owner?s manual and helps maintain readiness and service life. Service Kits for 55HP Outboard Motor that includes a thermostat ,thermostat cap gasket, anodes, spark plugs, fuel filter assembly and filter element, fuel line replacement kit, starter rope, stop switch lanyard assembly, trim tab, water pump impellers, propeller assembly and hardware, thrust rod components, throttle wire, water pump replacement kit, and cowling strap replacement kit.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    55HP Submersible 2 Stroke Boat Motor

    Notice 62d52818528f4df4bfe3c8a233f02975 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
001: 55HP Outboard Boat Engine, 2-stroke, gasoline, submersible, air-deployable outboard motor designed as a self-contained propulsion system for small craft applications. Operates on gasoline with certified NMMA TC-W3 2-cycle synthetic marine oil at a 50:1 fuel-to-oil mixture and includes features such as through-hub exhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering capability, and rapid post-submersion return to operation, QTY: 4, Unit: EA.002: Model 50 Motor Support Kit, Essential consumables and service accessories required to support item 001 engine break-in, fuel preparation, flushing, corrosion prevention, and long-term storage of the boat motor. Kit must include a 10-foot fuel line assembly with primer bulb, TC-W3 2-cycle synthetic marine oil, gas/oil mixing cup, universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate with mixing unit. This kit must support the fuel-mixing, flushing, and storage practices prescribed in the owner?s manual and helps maintain readiness and service life. QTY: 4, Unit: EA.003: Model 50 Ready Service/Spare Parts Kit, Service Kit for 55HP Outboard Motor that includes a thermostat, thermostat cap gasket, anodes, spark plugs, fuel filter assembly and filter element, fuel line replacement kit, starter rope, stop switch lanyard assembly, trim tab, water pump impellers, propeller assembly and hardware, thrust rod components, throttle wire, carburetor rebuildkit, water pump replacement kit, and cowling strap replacement kit. QTY: 4, Unit: EA.
69%
Combined Synopsis04/13/2026
2-stroke, gasoline, submersible, air-deployable outboard motordesigned as a self-contained propulsion system for small craft applications. Engine must bequalified for CRRC airdrop configurations. Must include features such as through-hubexhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering capability, rapidpost-submersion operability. Engine must have an EPA 3 star on gasoline or higher.Engines must be brand new and domestically manufactured and actively managed in theDLA Federal logistics system under an established National Stock Number (NSN). Essential consumables and service accessories required to supportengine break-in, fuel preparation, flushing, corrosion prevention, and long-term storage ofthe boat motor. Kit must include a 10-foot fuel line assembly with primer bulb, XD10-oil,universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate withmixing unit. This kit must support the fuel-mixing, flushing, and storage practicesprescribed in the owner?s manual and helps maintain readiness and service life. Service Kit for 55HP Outboard Motor that includes a thermostat,thermostat cap gasket, anodes, spark plugs, fuel filter assembly and filter element, fuel linereplacement kit, starter rope, stop switch lanyard assembly, trim tab, water pump impellers, propeller assembly and hardware, thrust rod components, throttle wire, water pumpreplacement kit, and cowling strap replacement kit.
63%
Combined Synopsis08/05/2026
The Tulsa Corp of Engineers is issuing a solicitation for outboard motors under W912BV26QA061.This specification is for the purchase and installation of two new 115 4-strokeoutboard motors, Twin engine control box, throttle and shift cables, stainless steel props, main engine harness, key switch, analog tachometer(s)/speedometer/hour meter(s)/voltage gauge(s)/fuel gauge/trim gauge(s), fuel/water separator assembly(s), trim and oil harness, and a hydraulic steering system for a Monark 24?Work Barge for the Oologah Lake Project Office in Rogers County, Oklahoma.
56%
Combined Synopsis06/08/2026
USNS HENRY J. KAISER KJZ 282 Coupling Parts. This is a sole source request for quote from Marine Propulsion Inc. as the sole designated company authorized to resell by the manufacturer. See attached sole source justification.
51%
Solicitation11/13/2026
Proposed procurement for NSN 6105015687464 MOTOR,ALTERNATING CURR: Line 0001 Qty 151 UI EA Deliver To: DLA DISTRIBUTION RED RIVER By: 0171 DAYS ADO Approved source is 3C0M7 013T145. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
49%
Combined Synopsis11/16/2026

Additional Details

Solicitation Number

W911S226U3649

Archive Date

Jul 9, 2027

Office Address

FORT DRUM, NY, 13602-5220