Notice ID: 63004ec1ef584c169c18ab6a0453c18eCombined Synopsis/SolicitationArchived
DOR-MOR PYRAMID MOORING ANCHORS FOR USCG USCGC HAMMER
Archived on September 23, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EDT
- Posted
- August 29, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 423860: Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- BASE CHARLESTON
- Place of performance
- Jacksonville Beach, 32250
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 70Z03625Q0006
- Notice ID
- 63004ec1ef584c169c18ab6a0453c18e
Description
This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued. This combined synopsis constitutes a solicitation and incorporates provisions and clauses in effect through federal acquisition circular 2024-02. The solicitation number is 70Z03625Q0006. This acquisition is 100% set aside for small businesses. The NAICS code is 423860, with a size standard of 175. The contract type will be a firm fixed-price purchase order. The evaluation process will be Lowest Price Technically Acceptable. The United States Coast Guard (USCG) has a requirement to purchase cast iron Dor-Mor pyramid mooring anchors for Aids to Navigation Team Jacksonville, FL. Specific requirements are detailed in the Statement of Work (SOW). The pyramid mooring anchors must be manufactured by Dor-Mor, Inc, equivalent products are not authorized. Justification for other than full and open competition for the name brand requirement is included in the solicitation attachments. All questions regarding this solicitation must be submitted in writing to adam.s.hitchcox@uscg.mil by 5:00 PM EST on September 4th. Please include the solicitation number in the subject line of the email. To maintain fairness, all questions and their corresponding answers will be posted on the solicitation no later than 5 PM on September 5th for visibility to all interested vendors. Questions submitted after the September 4th question deadline will not be answered. POINT OF CONTACT (POC): SKC Adam Hitchcox Email: Adam.S.Hitchcox@uscg.mil Phone: (571) 608-4730 LOCATION Deliver to the following location: USCG ANT Jacksonville 1320 4th Ave. N Jacksonville, FL 32250 Delivery location has a telehandler and will assist with the offload of the anchors. Ensure sure that your UEI is updated/or registered via www.SAM.gov website. It is mandatory that your UEI number is active within the SAM.gov website before doing business with the Coast Guard. Interested vendors must download and review all attachments included in this solicitation package, which consist of the Statement of Work (SOW), SF-1449, and applicable Provisions and Clauses. Please read the entire solicitation package carefully before preparing your quote. Quotes must include a detailed breakdown of estimated labor and material costs, and must clearly display the vendors Unique Entity Identifier (UEI) and Tax Identification Number (TIN). All quotes must be submitted via email to Adam.S.Hitchcox@uscg.mil no later than 5:00 PM EST on September 8, 2025. Quotes submitted via mail or telephone will not be accepted. A formal notice of changes (if applicable) will be issued in SAM.Gov. The Government intends to award the contract in its entirety to a single contractor on an all-or-nothing basis to the responsible offeror whose proposal is determined to be the lowest price technically acceptable (LPTA) and most advantageous to the Government, in accordance with the evaluation and award procedures outlined in FAR 13.106. While the intent is to select one contractor for this acquisition, the Government reserves the right not to make an award at all, depending on the quality of the proposals, the prices submitted, and the availability of funds. The Government reserves the right to reject any quotation that is deemed unreasonable in terms of program commitments, including contract terms and conditions, or if the cost is unreasonably high or low when compared to Government estimates. A proposal may be rejected if it reflects an inherent lack of competence or a failure to understand the complexity and risks associated with the program. Applicable FAR Clauses by References: 52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. 52.212-5- Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services. 52.225-1 Buy American Supplies (Oct 2022)
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (4)
- Download
PROVISIONS AND CLAUSES.pdf
1.1 MBAdded in Combined Synopsis/Solicitation version 4Posted - Download
SF-1449.pdf
884 KBAdded in Combined Synopsis/Solicitation version 4Posted - Download
Statement of Work.pdf
386 KBAdded in Combined Synopsis/Solicitation version 4Posted - Download
NAME BRAND JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (REDACTED).pdf
129 KBAdded in Combined Synopsis/Solicitation version 4Posted
Lifecycle
- 4Version 4Combined Synopsis/SolicitationArchivedCurrent
DOR-MOR PYRAMID MOORING ANCHORS FOR USCG USCGC HAMMER
- 6Version 6Award NoticeArchived
Type changed from Combined Synopsis/Solicitation to Award Notice
DOR-MOR PYRAMID MOORING ANCHORS FOR USCG USCGC HAMMER
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
COMBINED SYNOPSIS / SOLICITATION FOR COMMERCIAL PRODUCTS United States Coast Guard (USCG) | Base Miami Beach – Facilities Engineering Solicitation Number: 31020PR260000231 Procurement Type: Request for Quotation (RFQ) Applicable Regulations: Federal Acquisition Regulation (FAR) Parts 12 and 13 SECTION 1: GENERAL SOLICITATION INFORMATION This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation document will not be issued. Document Type: Combined Synopsis / Solicitation (FAR 12.603) Solicitation Number: 31020PR260000231 Procurement Type: Request for Quotations (RFQ) Contract Type: Firm-Fixed-Price (FFP) Issuing Agency: U.S. Coast Guard Base Miami Beach, Facilities Engineering Division Set-Aside Status: 100% Total Small Business Set-Aside NAICS Code & Title: 326299 – All Other Rubber Product Manufacturing (or 332999) Small Business Size Standard: 500 Employees Product Service Code (PSC): 2040 – Marine Hardware and Hull Items Solicitation Issue Date: Septembr 11, 2026 Questions Due Date: Septembr 18, 2026, 12:00 PM EST Quotations Due Date: Septembr 22, 2026, 12:00 PM EST Delivery Terms: FOB Destination (Freight Prepaid and Allowed) Place of Performance / Delivery: USCG Base Miami Beach, 100 MacArthur Cswy, Miami Beach, FL 33139 SECTION 2: SCHEDULE OF SUPPLIES / SERVICES (CLIN STRUCTURE) The Contractor shall furnish all labor, materials, equipment, manufacturing, quality testing, packaging, handling, and transportation necessary to manufacture, test, and deliver the items described below in strict accordance with the Statement of Work (SOW). CLIN 0001 High-Performance Foam-Filled Marine Fenders Nominal 5 ft Diameter × 8 ft Length (Eye-to-Eye), Grade 1.0 Performance Standard, equipped with Type 316 Stainless Steel (316SS) central internal continuous tension chain/pipe assembly, 316SS swivel end fittings, and included 316SS bow/anchor shackles, in full compliance with SOW Section 3.0. QTY 03 EA 0002 Technical Data, Testing & Quality Verification Submittals Contract Data Requirements List (CDRL): Commercial product data sheets, dimensioned general arrangement (GA) drawings, mill test reports (MTRs) for 316SS hardware, and certified performance verification test reports (energy absorption/reaction force per PIANC/ASTM). Qty 01 LOT 0003 Commercial Freight & Logistics (FOB Destination) Off-site handling, protective non-abrasive wrapping/crating, flatbed shipping, and delivery FOB Destination to USCG Base Miami Beach, FL. QTY 01 LOT SECTION 3: STATEMENT OF WORK (SOW) 1.0 General Information Parameter Details 1.1 Objective: Procure and receive three (3) high-performance, foam-filled marine fenders equipped with marine-grade Type 316 stainless steel end fittings and internal tension components FOB Destination. 1.2 Background: USCG Base Miami Beach operates waterfront berthing facilities requiring resilient fendering systems capable of enduring harsh marine saltwater environments, continuous UV radiation, and repeated vessel mooring impact forces. 1.3 Delivery Address US Coast Guard Base Miami Beach Facilities Engineering (ATTN: MK1 Arthur Andrade) 100 MacArthur Causeway, Miami Beach, FL 33139 2.0 Scope of Work 1. Manufacture and supply three (3) nominal 5 ft diameter × 8 ft length foam-filled marine fenders conforming to the functional performance and material criteria specified herein. 2. Furnish all integrated rigging hardware, including continuous through-chain assemblies, swivel end fittings, and bow/anchor shackles constructed exclusively of Type 316 Stainless Steel. 3. Submit standard commercial catalog cuts, product data sheets, and dimensional drawings for USCG Contracting Officer’s Representative (COR) review and written approval prior to commencing production. 4. Manage freight logistics, off-site handling, packaging, and commercial freight transport FOB Destination to USCG Base Miami Beach. 5. Provide manufacturer material test reports (MTRs), quality inspection records, and standard commercial warranty documentation upon delivery. 3.0 Salient Technical Characteristics 3.1 Dimensions & Geometry Nominal Size: 5 ft diameter × 8 ft length (eye-to-eye) [~1.52 m × 2.44 m] Body Diameter: 5.0 ft (1.52 m) Overall Length: 8.0 ft (2.44 m) eye-to-eye Contact Surface Length: Minimum 4.1 ft (1.24 m) flat body Draft (Unloaded/Floating): Approximately 1.2 ft (0.36 m) Nominal Weight: ~1,057 lbs (479 kg) per fender (±10%) Displacement / Volume: ~210 ft³ (5.98 m³) 3.2 Performance Ratings (at 60% Compression) Energy Absorption: Minimum 136 ft-kip (184 kN·m) Reaction Force: Maximum allowable 101 kip (449 kN) Average Reaction Pressure: ≤ 3.6 kip/ft² (170 kPa) Uncompressed Standoff: 5.0 ft (1.52 m) Compressed Standoff (60%): 2.0 ft (0.61 m) Footprint at 60%: Max Width: 5.5 ft (1.68 m) | Max Length: 5.8 ft (1.76 m) Contact Area at 60%: Minimum 28.4 ft² (2.64 m²) 3.3 Core & Outer Skin Core Material: 100% closed-cell, cross-linked PE/PU foam (non-water absorbing) Skin Construction: Continuous, reinforced elastomeric polyurethane Skin Thickness: Minimum 1.0 inch (25 mm) over cylindrical body External Color: Non-marking Marine Black with UV/ozone stabilizers 3.4 Hardware & Fittings End Fittings: Heavy-duty Type 316 Stainless Steel (316SS) swivel end fittings Tension Member: Central internal continuous 316SS tension chain/pipe assembly Safe Working Load: Minimum 17.0 kip (76 kN) end-pull load Bow/Anchor Shackles: Two (2) 316SS Bow/Anchor shackles per fender (1.00" size / 1.13" pin) 3.5 Markings Identification Markings: Manufacturer name, model, date of manufacture, serial number, USCG ID 4.0 Submittals & Quality Assurance Product Data Sheets: Published manufacturer technical data validating compliance with all physical and mechanical properties. GA Drawings: Dimensioned general arrangement drawings verifying external dimensions and hardware. Performance Data: Certified deflection, energy absorption, and reaction force data (PIANC / ASTM). Material Certifications: Certified Mill Test Reports (MTRs) for all Type 316SS metallic components. Quality Standard: Active ISO 9001 certification and recognized classification society approval (ABS, DNV, Lloyd's, etc.). *Note: Fabrication shall not commence until written approval of submittals is issued by the USCG COR (due within 15 calendar days post-award). 5.0 Packaging, Handling, & Delivery 5.1 Delivery Basis: FOB Destination (Freight Prepaid and Allowed) 5.2 Delivery Schedule: Within negotiated timeframe (≤ 60 calendar days from written submittal approval) 5.3 Coordination: Provide carrier delivery notification at least 48 hours prior to arrival 5.4 Protective Packaging: Non-abrasive wrapping; 316SS isolated from carbon steel surfaces to prevent galvanic contamination 6.0 Inspection & Acceptance Receiving Inspection: Performed by USCG COR or designated representative upon delivery. Rejection Criteria: Cuts, tears, punctures, skin delamination, dimension variance, non-316SS hardware substitution, missing serials, transit damage. Final Acceptance: Verification of full compliance with SOW and approved submittals. 7.0 Government Points of Contact Contracting Officer’s Representative (COR): Mr. Boris Abello | Email: Boris.Abello@uscg.mil | Phone: (305) 535-4564 Public Works Officer (PWO): CWO Ryan Romesberg | Email: Ryan.T.Romesberg@uscg.mil | Phone: (305) 535-4547 Facilities Engineer (FE): LT Benjamin Gonski | Email: Benjamin.A.Gonski@uscg.mil | Phone: (305) 535-4589 Receiving Official / Point of Delivery: MK1 Arthur Andrade | Location: USCG Base Miami Beach, Facilities Engineering, 100 MacArthur Causeway, Miami Beach, FL 33139 SECTION 4: CONTRACT CLAUSES 4.1 Clauses Incorporated by Reference (FAR 52.252-2) (FEB 1998) FAR 52.204-7: System for Award Management (OCT 2018) FAR 52.204-13: System for Award Management Maintenance (OCT 2018) FAR 52.204-19: Incorporation by Reference of Representations and Certifications (DEC 2014) FAR 52.204-23: Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (DEC 2023) FAR 52.204-25: Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) FAR 52.204-27: Prohibition on a ByteDance Covered Application (JUN 2023) FAR 52.209-6: Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (JAN 2026) FAR 52.211-17: Delivery of Excess Quantities (SEP 1989) FAR 52.212-4: Contract Terms and Conditions—Commercial Products and Commercial Services (NOV 2023) FAR 52.219-6: Notice of Total Small Business Set-Aside (NOV 2020) FAR 52.219-28: Post-Award Small Business Program Rerepresentation (FEB 2024) FAR 52.222-3: Convict Labor (JUN 2003) FAR 52.222-19: Child Labor—Cooperation with Authorities and Remedies (FEB 2024) FAR 52.222-21: Prohibition of Segregated Facilities (APR 2015) FAR 52.222-26: Equal Opportunity (SEP 2016) FAR 52.222-36: Equal Opportunity for Workers with Disabilities (JUN 2020) FAR 52.222-50: Combating Trafficking in Persons (NOV 2021) FAR 52.222-90: Addressing DEI Discrimination by Federal Contractors (DEVIATION APR 2026) (APR 2026) FAR 52.223-18: Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) FAR 52.225-1: Buy American—Supplies (OCT 2022) FAR 52.225-13: Restrictions on Certain Foreign Purchases (FEB 2021) FAR 52.232-33: Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) FAR 52.232-40: Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) FAR 52.233-3: Protest after Award (AUG 1996) FAR 52.233-4: Applicable Law for Breach of Contract Claim (OCT 2004) FAR 52.244-6: Subcontracts for Commercial Products and Commercial Services (DEVIATION) (APR 2026) FAR 52.247-34: F.O.B. Destination (NOV 1991) HSAR 3052.209-70: Prohibition on Contracts with Corporate Expatriates (JUN 2006) HSAR 3052.212-70: Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items (SEP 2012) SECTION 5: INSTRUCTIONS TO OFFERORS (ADDENDA TO FAR 52.212-1) Quotations shall be submitted electronically via email to the Contracting Officer and Contract Specialist no later than the deadline indicated in Section 1. Volume I: Technical Capability 1. Manufacturer Cut Sheets & Specifications: Published catalog cuts confirming dimensions, foam core properties, and 1.0" skin thickness. 2. Rigging & Hardware Verification: Confirmation of all-Type 316SS components (pull load ≥ 17.0 kip). 3. Quality Standards: Active ISO 9001 certificate and marine classification type approval. 4. Delivery Confirmation: Statement agreeing to FOB Destination and lead times. Volume II: Past Performance Up to three (3) references for similar fendering contracts within past 3 years including Client Name, Contract # & Value, POC (Name/Phone/Email), and Scope Description. Volume III: Price Proposal 1. Completed CLIN pricing table from Section 2. 2. Statement confirming quote validity for 90 calendar days. 3. Confirmation of active SAM.gov registration under eligible NAICS code. The Government will award a Firm-Fixed-Price contract to the responsible offeror whose quotation conforms to the solicitation and represents the Best Value (lowest evaluated price technically acceptable). 2.0 Evaluation Factors Factor 1: Technical Acceptability Evaluation Method: Acceptable / Unacceptable Key Criteria: 5 ft × 8 ft dimensions, 100% closed-cell foam, 1.0" PU skin; Energy absorption ≥ 136 ft-kip, reaction force ≤ 101 kip; Full Type 316SS through-chain, swivel end fittings, and shackles (1.00" / 1.13" pin); Active ISO 9001 certification. Factor 2: Past Performance Evaluation Method: Acceptable / Unacceptable Key Criteria: Confidence assessment in contract fulfillment based on recent/relevant contracts. (Neutral rating for no record = Acceptable). Factor 3: Price Evaluation Method: Price Reasonableness (FAR 13.106-3) Key Criteria: Total evaluated price (Sum of CLINs 0001, 0002, 0003). Award made to Best Value and past performance acceptable offer. SECTION 6: EVALUATION FACTORS & BASIS FOR AWARD (ADDENDA TO FAR 52.212-2) 1.0 Basis for Award The Government will award a Firm-Fixed-Price contract to the responsible offeror whose quotation conforms to the solicitation and represents the Best Value (lowest evaluated price technically acceptable). 2.0 Evaluation Factors Factor 1: Technical Acceptability Evaluation Method: Acceptable / Unacceptable Key Criteria: 5 ft × 8 ft dimensions, 100% closed-cell foam, 1.0" PU skin; Energy absorption ≥ 136 ft-kip, reaction force ≤ 101 kip; Full Type 316SS through-chain, swivel end fittings, and shackles (1.00" / 1.13" pin); Active ISO 9001 certification. Factor 2: Past Performance Evaluation Method: Acceptable / Unacceptable Key Criteria: Confidence assessment in contract fulfillment based on recent/relevant contracts. (Neutral rating for no record = Acceptable). Factor 3: Price Evaluation Method: Price Reasonableness (FAR 13.106-3) Key Criteria: Total evaluated price (Sum of CLINs 0001, 0002, 0003). Award made to Best Value and past performance acceptable offer. | 50% | Combined Synopsis | 09/21/2026 |
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, effective, 13 March 2026. It is anticipated that a purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: Evaluation Criteria 1. Technical Acceptability The Government will evaluate each quote to determine whether the offered products meet all of the requirements specified in the solicitation, including: Compliance with all packaging, preservation, and marking requirements as specified. Quotes that do not state that the requirement can be met will not be considered. Ability to meet or exceed the required delivery schedule. 2. Price Quotes will be evaluated for fairness and reasonableness of price. The total evaluated price will be the sum of all line items, include shipping cost into item pricing. Quotes with a separate line for shipping will not be considered. 3. Past Performance The Government may consider the vendor’s past performance with the U.S. Coast Guard or other federal agencies, if available and relevant. The Government reserves the right to use information from sources other than those provided by the vendor. 4. Responsibility The vendor must have an active registration in SAM.gov prior to award. The vendor must not be debarred or suspended from doing business with the federal government. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: LINE ITEM 1: Item Name: REPAIR KIT, STOPPER NSN: 2040-01-483-3947 PN: MDL573009KIT Qty: 06 EA Kit Include: 2 EA SEALS(110X130X12) P/N: SKF43301 HMSA7 V 2 EA BEARINGS (SPH RLR) (110X180X69) P/N: SKF24122 CC/W33 WASHER (RLR CHK) P/N 573-009PC9 SEAL WIPER P/N 573-009PC13 LOCKPIN P/N 573-009PC25 PIN QUICK P/N 98404A496 2 EA GASKETS P/N 573-009PC71 Packaging requirements: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS ARE ACCEPTABLE. MARKING IAW MIL-STD-129R & BAR CODING IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. PACKAGE LABEL: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER FOR TECHNICAL INQUIRIES: POC: EQUIPMENT SPECIALIST E-MAIL: KEVIN.L.RECKARD@USCG.MIL PH: 571-613-3388 ** SHIPPING: FOB DESTINATION REQUIRED. ** ITEM REQUIRED DELIVERY DATE: 12/18/26 If you are unable to meet the required delivery date, please indicate your earliest possible delivery date in your quotation. SHIP TO: USCG SURFACE FORCES LOGISTICS CENTER 2401 HAWKINS POINT ROAD RECEIVING ROOM- BUILDING 88 BALTIMORE, MD 21226 All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm. Please make sure that any changes in Delivery Timeframes or tracking information get sent to Christopher.A.Huertas-Rolon@uscg.mil Invoicing In IPP It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov. All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, TIN number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be included in line-item price. To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: Christopher.A.Huertas-Rolon@uscg.mil | 37% | Solicitation | 11/18/2026 |
Award notice for combined synopsis/solicitation 70Z03625Q0006 - Dor-Mor Pyramid Mooring Anchors for USCGC Hammer. | 100% | AwardedArchived | Open |
71% | Awarded | Open | |
Award of Contract for Anchor | 68% | Awarded | Open |
Additional Details
Solicitation Number
70Z03625Q0006
Archive Date
Sep 23, 2025