Notice ID: c963fda775c088bd5347f2d1a81c2f51Presolicitation
66--HBR-A943. Purchase of EPRB equipment- Arrow Gold
Archived on October 9, 2019. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 AM UTC−05:00
- Posted
- September 23, 2019
- Notice type
- Presolicitation
- NAICS
- 541370: Surveying and Mapping (except Geophysical) Services
- Agency
- Environmental Protection Agency
Notice details
- Office
- REGION 1 CONTRACTING OFFICE
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Sep 10, 2025
Identifiers
- Solicitation number
- 68HE0119Q0030
- Notice ID
- c963fda775c088bd5347f2d1a81c2f51
Description
Purchase of EPRB equipment- Arrow Gold RTK kit - Receiver. Emergency response equipment to support the Region 1 Superfund Emergency Management Division.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
68HE0119Q0030- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
- Pre-SolicitationCurrentSep 23, 2019
66--HBR-A943. Purchase of EPRB equipment- Arrow Gold
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
DESCRIPTION The Air Force Life Cycle Management Center (AFLCMC) is conducting market research to support the DAF-MAMBA AoA. Legacy electromagnetic spectrum (EMS) methods are inadequate, risking operations in the Electromagnetic Operational Environment (EMOE). REQUIREMENT OVERVIEW The DAF seeks information on improved technologies, tools, and methodologies for effective battle management of systems operating in the EMS to establish and maintain freedom of action. DAF-MAMBA, as a component of the Advanced Battle Management System (ABMS), will provide the warfighter with Situational Awareness (SA), Decision Support (DS), and Command and Control (C2) capabilities across operational and tactical levels. ATTACHMENT Interested vendors must be able to handle CUI documents and request access to the CUI document attached to this post. SIPRnet access is required for additional information related to this RFI. SUBMISSION INSTRUCTIONS This RFI is for information and planning purposes only to compile market reasearch. The Government does not intend to award a contract based on this requested or to otherwise pay for the information provided. Responses will be treated as information only and will not be evaluated as a proposal. The submission deadline is 11 November 2026 at 5pm Eastern Time. POINTS OF CONTACT Contracting Officer: Melissa Droeske melissa.droeske@us.af.mil and Contract Specialist: Mackenzi Soul mackenzi.soul@us.af.mil | - | Market Research | 11/11/2026 |
Contracts for a new HTRW MATOC pool are anticipated to be awarded to a minimum of three small contracts and up to three unrestricted contracts with a total value of up to $49,000,000.00. The location of the work to be performed under this contract shall be primarily in the six New England states but will also include other states and districts within the North Atlantic Division mission area. The work may involve performing Site Inspections, Remedial Investigations, Feasibility Studies, Proposed Plans, Records of Decision, Engineering Evaluation and Cost Analysis, Remedial Designs, Removal Designs, Removal Actions, Interim Removal Actions, and/or Remedial Actions at HTRW sites that are being addressed through the U.S Environmental Protection Agency (USEPAs) Superfund Program, the Department of Defense (DoDs) Base Realignment and Closure Program (BRAC) and Defense Environmental Restoration Program (DERP) Formerly Used Defense Sites (FUDS) Program, and other Interagency Support Customers. HTRW work performed for USACE must generally comply with the DERP statute [10 United States Code (USC) 2700 et seq.], the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) 42 USC 9601 et seq., Executive Orders (EOs) 12580 and 13016, the National Oil and Hazardous Substances Pollution Contingency Plan (NCP), and all applicable DoD and Army policies. | - | Solicitation | 01/29/2027 |
Engineering Services and Supplies to be supplied for the Engineering and Sustainment/Readiness Support of the AN/SPY Radar System, AEGIS MK99 Fire Control System, Radar Transmitter Groups, AN/SPS-49 radars and ancillary equipment including AEGIS Microwave Tubes. | - | Sole Source / J&A | Open |
The Strategic Systems Programs (SSP) intends to issue a Request for Proposal (RFP) and negotiate an Order under existing BOA N0003025G1038, issued on a sole source basis to General Dynamics Mission Systems (GDMS), Pittsfield, MA. Work shall include procuring, inspecting and testing U.S. and UK Weapon Control System Spares and Special Support equipment spare parts listed as deliverables for the Fire Control System (FCS) Auxiliary System (AS) including the Strategic Weapons System Maintenance Information Network (SWSMIN), Electronic Work Log (EQL) and associated Fire Control Support Equipment. Weapon Control System Spares and Special Support Equipment spare parts shall be procured and delivered in accordance with the applicable Ordnance Directives (ODs), Technical Program Management processes, and Statement of Work (SOW). Award will be made using other than full and open competition to General Dynamics Mission Systems (GDMS), Pittsfield, Massachusetts, the only known source with the requisite design background, system knowledge and operational experience relative to the TRIDENT II Fire Control Subsystem capable of providing the required efforts within existing technical, cost and fleet schedule constraints. No Solicitation package is available. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. No email or phone inquiries will be entertained. Companies interested in subcontracting opportunities should contact General Dynamics Mission Systems (GDMS), Pittsfield, MA, Small Business Liaison, Ms. Alexis Petro via email at alexis.petro@gd-ms.com. | - | Special Notice | 11/06/2026 |
Request for Information (RFI) only. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | - | Market Research | 11/20/2026 |
Additional Details
Solicitation Number
68HE0119Q0030
Archive Date
Oct 9, 2019
Office Address
BOSTON, MA, 02109