Wire Rope
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- October 7, 2026
- Notice type
- Presolicitation
- Set-aside
- No Set aside used
- NAICS
- 332618: Other Fabricated Wire Product Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAIR.NAVAIR NAWC AD.NAVAIR WARFARE CTR AIRCRAFT DIV
- Place of performance
- 0, New Jersey, 08733
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N6833526R1121
- Notice ID
- 6901e7f252de4034a7724846be4c97d8
Description
SYNOPSIS: # N6833526R1121
The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to solicit on a sole-source basis to Wireco Worldgroup Inc. (Cage: 08721) for the procurement of Wire Rope, Steel, 1-7/16” Diameter. The wire rope is used to make the Cross Deck Pendant (CDP).
The Government intends to procure the above items under the authority of 10 USC 3204(a)(1), Revolutionary FAR Overhaul 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. A determination by the Government, not to open the requirement to competition based upon the response to this notice, is solely within the discretion of the Government. Responses must be received within fifteen (15) days of publication of this notice.
PSC Code: 4010 – Chain and Wire Rope
NAICS Code: 332618 – Other Fabricated Wire Product Manufacturing
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 1
- 2Version 2PresolicitationCurrent
Type changed from Sources Sought to Presolicitation
Wire Rope
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This Sources Sought notice is being posted to satisfy the requirements of Defense Federal Acquisition Regulation Supplement (DFARS) 206.302-170. The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole-source basis with EAA Tools, LLC (EEA), CAGE: 5LNR7, for the award of a contract. The designated contractor, EEA, shall provide to NAWCAD Lakehurst the manufacture and delivery of the Main Rotor Spindle Pry Bars (P/N SPB-60-RS, NSN 3040-01-722-4706) for the Royal Australian Navy (RAN); Danish Defense Acquisition and Logistics Organization (DALO); and the India Navy (IN) in support of the MH-60R program. The applicable North American Industry Classification System (NAICS) code for this requirement is 332216 (Saw Blade and Handtool Manufacturing). The Product Service Code (PSC) is 3040 (Miscellaneous Power Transmission Equipment). THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible small and large businesses, capable of fulfilling the requirements described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this Notice. EAA Tools, LLC. is the OEM, sole designer, developer and manufacturer of the Main Rotor Spindle Pry Bar. The Main Rotor Spindle Pry Bar securely attaches to spindle damper mount and provides required leverage and stability to manipulate main rotor spindle assembly on aircraft for various maintenance requirements to include access to spindle mounts bolts and pitch control rod removal/re-installation. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 3204(a)(1), "Only one responsible source and no other supplies or services will satisfy agency requirements" for this action. (THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.) Responsible, interested parties, however, may identify their interest by submitting a capabilities statement. The Government will consider all information received prior to the closing date of this notice. A determination by the Government not to compete this procurement based upon responses to this notice is solely within the discretion of the Government. The Government will not pay for any responses received. There is no commitment by the Government to issue any solicitations, make an award or awards, or be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted. | - | Market Research | 11/12/2026 |
SYNOPSIS: #N68335-26-Q-1184 Anchor Tiedown Weldment Naval Air Warfare Center Aircraft Division - Kuwait F/A-18 E-F Super Hornet Program The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Vital Link, Inc. (CAGE: 0ZV99) for the Anchor Tiedown Weldment (Part Number: 602145-01) hardware components in support of the NAWCAD Kuwait F/A-18 E-F Super Hornet Program. This order will procure two (2) Anchor Tiedown Weldments. The Anchor Tiedown Weldment is used during maintenance of the F-414 engine inside the test cell. The vendor will build/fabricate and conduct a pull test of the Anchor Tiedown Weldment. Vital Link, Inc., as the Original Equipment Manufacturer of the Anchor Tiedown Weldment, is the only source with the requisite knowledge, technical experience, and production-level data to produce these components. The components being procured are integral to the maintaining the F-414 engine and are critical to maintaining operational readiness. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 4920 – Aircraft Maintenance and Repair Shop Specialize Equipment NAICS Code: 332710 – Machine Shops - size standard 500 | - | Pre-Solicitation | 11/19/2026 |
SYNOPSIS: #N68335-26-Q-1194 BRACE, AIRCRAFT GROUND SERVICING Naval Air Warfare Center Aircraft Division - F/A-18F and EA-18G Royal Australian Air Force Program The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Northrop Grumman Systems Corporation (CAGE: 76823) for the BRACE, AIRCRAFT GROUND SERVICING (Part Number (P/N): 74D110613-1007, National Stock Number (NSN): 1730-01-473-3572) in support of the Royal Australian Airforce (RAAF) F/A-18F & EA-18G Program. This order will procure four (4) BRACE, AIRCRAFT GROUND SERVICING. The support is necessary to hold the stabilizer in a stable, trim position or a 22-degree leading-edge-down position during various maintenance activities, such as engine or stabilizer removal and replacement. The recommended solution is the Brace, Aircraft Ground Servicing (P/N: 74D110613-1007) Horizontal Stabilizer Support, which is designed to be usable on both the right and left sides of the aircraft. A key feature is a tension bolt that fails during an overload condition, allowing the stabilizer to rotate freely and prevent damage. Northrop Grumman Systems Corporation, as the Original Equipment Manufacturer of the BRACE, AIRCRAFT GROUND SERVICING, is the only source with the requisite knowledge, technical experience, and production-level data to produce these components. The components being procured are integral to hold the stabilizer in a stable, trim position or a 22-degree leading-edge-down position during various maintenance activities and are critical to maintaining operational readiness. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 1730 – Aircraft Ground Servicing Equipment NAICS Code: 332710 – Machine Shops - size standard 500 | - | Pre-Solicitation | 11/19/2026 |
| - | Solicitation | 11/16/2026 | |
NOTICE OF INTENT TO SOLE SOURCE TO ISOLATION DYNAMICS CORP SEE ATTACHED PDF | - | Special Notice | 06/29/2026 |
Additional Details
Solicitation Number
N6833526R1121
Archive Date
Mar 30, 2027
Office Address
JOINT BASE MDL, NJ, 08733