GovChime
Notice ID: 907469ab75c040e68719b21148cea7daCombined Synopsis/Solicitation

Provide all labor and material to perform a major overhaul of ship’s service diesel generator engines on TS KINGS POINTER

Archived on April 19, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−04:00
Posted
March 26, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
336611: Ship Building and Repairing
Agency
Department of TransportationMARITIME ADMINISTRATION

Notice details

Office
693JF7 DOT MARITIME ADMINISTRATION
Place of performance
Kings Point, 11024
Last updated
Sep 25, 2026

Identifiers

Solicitation number
6933A224Q000006
Notice ID
907469ab75c040e68719b21148cea7da

Description

See attached Combined Synopsis/Solicitation. Amend 1 (3/26/24). Please see attached Combined Synopsis/Solicitation amendment 1

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:6933A224Q000006
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentMar 12, 2024

    Provide all labor and material to perform a major overhaul of ship’s service diesel generator engines on TS KINGS POINTER

    Notice 907469ab75c040e68719b21148cea7da on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
67%
AwardedOpen
***The purpose of Amendment 0001 to W912BU26QA010 is to extend the solicitation closing date to 19 March 2026 at 1:00 PM EST.*** The U.S. Army Corps of Engineer (USACE), Philadelphia District (NAP), intends to award a firm fixed-price purchase order to procure services to furnish all engineering, design, labor, services, equipment, parts and materials necessary to perform drydocking and repairs for the Survey Vessel RECONNAISSANCE in accordance with the Statement of Work. BASIS FOR SELECTION OF AWARD: Award shall be made to the offeror who is has the lowest price meeting the technical requirements. Quote must meet or exceed the statement of work and delivery schedule to be considered for award. QUOTE SUBMISSION: Offerors shall submit their quotes no later than 1300 EST on 12 March 2026 as follows: The Offerors quote shall be submitted electronically via Procurement Integrated Enterprise Environment (PIEE), as described below. The Offerors quote shall not contain classified data. The use of hyperlinks in bids is prohibited. NOTE: The only authorized transmission method to this solicitation is electronically via PIEE Solicitation Module online submission. NO OTHER TRANSMISSION METHODS (EMAIL, FACSIMILIE, REGULAR MAIL, HANDCARRIED, ETC.,) WILL BE ACCEPTED. ADDITIONAL INFORMATION: Specific information pertaining to this procurement is available in the Solicitation. The Solicitation documents are posted on the SAM.gov website. It is, and will continue to be, the responsibility of all potential Offerors to monitor the SAM.gov website for any amendments, updates, responses to industry questions/comments, etc. The Government will not be maintaining a mailing list. POINT-OF-CONTACT: The Primary Contract Specialist for this Solicitation is Katie Sayers at katie.l.sayers@usace.army.mil. Any communication regarding this notice should be made in writing sent via email and must identify the Solicitation number, company name, address, phone number and point of contact.
65%
Solicitation03/19/2026
COMBINED SYNOPSIS / SOLICITATION Commercial Services | USCGC Maple Fuel System Repair Solicitation Number 52000PR270000400 Procurement Type Request for Quotations (RFQ) – Commercial Services Issuing Agency United States Coast Guard (USCG) Period of Performance TABLE OF CONTENTS 1. Solicitation Information. 3 2. Description of Solicitation. 3 3. Schedule of Supplies / Services (Price Schedule). 3 3.1 Vendor Information (To Be Completed by Offeror). 4 4. Scope of Work (SOW). 5 4.1 General Information. 5 4.2 Background. 5 4.3 Scope of Work Requirements. 5 4.3.1 Contractor Responsibilities. 5 4.3.2 Specific Work Items. 5 4.4 Condition Found Report (CFR) Requirement. 5 4.5 Materials & Parts. 6 4.6 Testing & Acceptance. 6 4.7 Deliverables. 6 4.8 Environmental & Safety Compliance. 6 5. Instructions to Offerors & Evaluation Criteria. 7 5.1 Instructions for Submitting Quotations. 7 5.2 Basis for Award. 7 6. Applicable Clauses and Provisions. 7 1. Solicitation Information Solicitation Number: 52000PR270000400 Procurement Type: Request for Quotations (RFQ) – Commercial Services Set-Aside Designation: Small Business Set-Aside Issuing Agency: United States Coast Guard (USCG) Unit / Vessel: USCGC Maple (Asset Type: CB-L, Hull Number: 22355) Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance: TBD Unit Point of Contact (POC): MKC Rand Willette | Phone: 813-997-6886 | Email: Rand.a.willette@uscg.mil COR: Stephen Donithan |Stephen.W.Donithan@uscg.mil Contracting Officer (Contracting Actions only) |Joshua.C.Richardson2@uscg.mil 2. Description of Solicitation This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. Solicitation Number 52000PR270000400 is issued as a Request for Quotation (RFQ). This acquisition is set aside 100% for Small Business concerns. All responsible small business sources may submit a quotation which shall be considered by the agency. 3. Schedule of Supplies / Services (Price Schedule) Contractors shall provide firm-fixed-price (FFP) quotations for the following Contract Line Item Numbers (CLINs): CLIN Description Qty Unit Unit Price Total Price 0001 Fuel System Repair and Fuel Polishing (USCGC Maple CB-L 22355): Provide all labor, materials, equipment, and supervision to replace high-pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination; clean fuel cooler and lines; polish fuel; and conduct operational testing in accordance with the attached Scope of Work (SOW). 1 Job $__________ $__________ TOTAL Total Quoted Price $__________ 4. Scope of Work (SOW) 4.1 General Information Unit: USCGC Maple Asset Type: CB-L Hull Number: 22355 Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance Dates: 10/25/2026 – 11/15/2026 Unit POC: MKC Rand Willette / 813-997-6886 / Rand.a.willette@uscg.mil 4.2 Background While underway, the 22355 received a fault code for low fuel rail pressure: Code MID:128 PID 164 FMI 1 on Engine SN A1186212. 4.3 Scope of Work Requirements 4.3.1 Contractor Responsibilities Provide all labor, materials, equipment, and supervision necessary to complete the work described. Comply with all applicable USCG policies, manufacturer specifications, and regulatory requirements. 4.3.2 Specific Work Items Work Item 1: Replace high pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination. Clean fuel cooler and lines. Polish fuel. 4.4 Condition Found Report (CFR) Requirement If additional discrepancies, deficiencies, or required repairs are identified that are outside the defined Scope of Work, the contractor shall: Immediately notify the Unit POC. Submit a written Condition Found Report (CFR) detailing: Description of discrepancy Recommended corrective action Parts and labor breakdown Cost estimate Impact to schedule Note: No additional work outside the approved Scope of Work shall be performed without written authorization from the Government. Unauthorized work will not be reimbursed. 4.5 Materials & Parts Original Equipment Manufacturer (OEM) parts are required unless otherwise approved. Provide part numbers and specifications. All materials shall meet manufacturer and USCG standards. 4.6 Testing & Acceptance Conduct operational testing upon completion. Demonstrate proper functionality to the USCG representative. Provide written service report and warranty documentation. Work is considered complete upon Government acceptance. 4.7 Deliverables Itemized invoice Service report Parts list (with serial numbers, if applicable) Warranty documentation (if applicable) 4.8 Environmental & Safety Compliance Proper disposal of hazardous materials. Spill prevention measures required. Compliance with all federal, state, and local regulations. 5. Evaluation Criteria 5.2 Basis for Award Award will be made to the responsible Small Business offeror whose quotation conforms to the solicitation requirements and is most advantageous to the Government, price and other factors considered (Technical Capability, OEM Parts Compliance, Past Performance, and Price). 6. Applicable Clauses and Provisions The following Federal Acquisition Regulation (FAR) and Homeland Security Acquisition Regulation (HSAR) provisions and clauses apply to this solicitation and subsequent award: FAR 52.212-1 – Instructions to Offerors—Commercial Products and Commercial Services FAR 52.212-2 – Evaluation—Commercial Products and Commercial Services FAR 52.212-3 – Offeror Representations and Certifications—Commercial Products and Commercial Services FAR 52.212-4 – Contract Terms and Conditions—Commercial Products and Commercial Services FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (incorporating FAR 52.219-6, Notice of Total Small Business Set-Aside) FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors HSAR 3052.212-70 – Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items
64%
Combined Synopsis11/06/2026
The reason for this amendment is to provide to extend the solicitation closing date until Monday 16th November, 2026. _______________________________________________ * * ___________________________________________________ The reason for this amendment is to provide responses to the questions submitted by interested offerors, and to add the Wage Determination for Honolulu to the solicitation. ___________________________________________________ * * ___________________________________________________ The Contractor shall furnish all necessary labor, materials, services, equipment, supplies, power, accessories, facilities, and all other items required—except as otherwise specified—to perform dockside repairs in accordance with this solicitation and all attached specifications. The scope of work includes ship repair and associated support work and may include work not currently listed as individual Work Items. Work Items 01 and 03 will require the presence onsite of an AUTHORIZED/LICENSED OEM service provider for Caterpillar Marine Diesel engine/Generators (see attached Justification and approval).
64%
Combined Synopsis11/16/2026
This is a Sources Sought Notice / Request for Information (RFI) only. This is NOT a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ). No solicitation is currently available. The U.S. Army Corps of Engineers (USACE), Jacksonville District, is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to meet the requirements for Drydocking and repair services for USACE Vessels. A Virtual Industry Day is currently being contemplated, and a Microsoft Teams Link will be added to this notice. Currently, the Vistural Industry Day is scheduled for 15 December 2026, beginning at 9 am Eastern. A Site Visit is also being contemplated for 7 January 2027. Questions will be due on 17 January 2027 by noon Eastern. The U.S. Army Corps of Engineers - Jacksonville District has a requirement for the following boat troubleshooting and repair services: Hull and Structural Maintenance (per ER 750-1-1): Hull Inspection and Repair: Capability to perform ultrasonic thickness testing, steel plating repair/replacement, underwater hull repairs and cathodic protection testing and anode replacement, window, hatches and door maintenance and repair, and bilge and interior cleaning. Surface Preparation and Coating: Capability to perform abrasive blast cleaning and painting of the underwater body, freeboard, main decks and superstructure. Mechanical and Electrical Systems (per ER 750-1-1): Propulsion and Power: Overhaul and repair of main propulsion engines and auxiliary generators including the diesel engines, outboard gasoline engines, propulsion shaft, propeller, waterjet and rudder repair, HVAC equipment, hydraulic components and load handling equipment, galley and head equipment troubleshooting and repair, and boat trailer maintenance and repair. Piping and Electrical: Maintenance of all vessel piping, electrical installations, and onboard electronic equipment including bridge electronic systems, tank inspection, cleaning and repair, electrical system grooming and repair (12/24vdc and 120/240vac), Safety Systems: Servicing of life-saving appliances, fire detecting/extinguishing equipment, pollution prevention systems, life raft and associated safety equipment service and repair, intrusion detection and CCTV system maintenance and repair. Naval Architects/Marine Engineers to perform naval architecture analysis, determining crane safety, structural integrity, and stability during major conversions or rehabilitation. Qualified Paint/Coating Inspectors to oversee surface preparation and coating applications. These inspectors ensure compliance with standards established by the Steel Structures Painting Council (SSPC) and the National Association of Corrosion Engineers (NACE) / AMP. USCG/ABS certification inspections for vessels holding a Certificate of Inspection (COI) or load line to ensure compliance with Subchapter I and/or American Bureau of Shipping (ABS) classification rule. Marine Surveyor Services accredited by the National Association of Marine Surveyors (NAMS) or the Society of Accredited Marine Surveyors (SAMS) with at least 5 years of experience in commercial marine plant. They perform annual inspections and condition surveys. Marine Chemist to certify tanks and spaces as safe for hotwork/personnel. Vessel characteristics: Vessel Name/Type: Survey Vessel FLORIDA-II Length/Beam/Draft: 62’ / 24’ / 3’ Displacement: 42.5 tons Vessel Name/Type: Survey Vessel SALZER Length/Beam/Draft: 40’ / 13’-6” / 3’ Displacement: 14 tons Vessel Name/Type: Tug LEITNER Length/Beam/Draft: 50’ / 20’ / 8’ Displacement: 51.2 Tons Vessel Name/Type: Tug CHOBEE Length/Beam/Draft: 25’ / 16’ / 6’ Displacement: 25 tons Vessel Name/Type: Barge CFBC-1 Length/Beam/Draft: 104’ / 38’ / 8’ Displacement: 100-150 tons Vessel Name/Type: Barge CN-4 Length/Beam/Draft: 120’ / 45’ / 10’ Displacement: 150-200 tons Vessel Name/Type: Multiple Small Survey Vessels Length/Beam/Draft: 25-40’ / 7-12’ / 19” – 30” Displacement: 2.5 to 10 tons Specific Capabilities may include: Business and Contracting Capabilities (per EP 715-1-8): Experience with Local Conditions: Ability to navigate specific waterways to the facility, handle local environmental constraints, and manage seasonal weather impacts Drydocking and Facility Capabilities: Lifting/Docking/Blocking Capacity: Dimensions and tonnage capacity of the drydock, marine railway, or travel lift to safely accommodate the specific USACE vessel class. Location: Physical location of the shipyard to calculate transit time and fuel costs. Interested firms are asked to email the Contract Specialists, Ms. Brittany Jackson, at brittany.r.jackson@usace.army.mil, or Ms. Kelly Koger, at kelly.l.koger@usace.army.mil.
61%
Market Research01/17/2027

Additional Details

Solicitation Number

6933A224Q000006

Archive Date

Apr 19, 2024

Office Address

WASHINGTON, DC, 20590