Notice ID: af76de11c0cc5d224efcb4c82f3b89edCombined Synopsis/Solicitation
Electro-Mechanical Testing Machine
Archived on September 13, 2017. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC+02:00
- Posted
- August 11, 2017
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 541380: Testing Laboratories and Services
- Agency
- Department of TransportationMARITIME ADMINISTRATION
Notice details
- Office
- 693JF7 DOT MARITIME ADMINISTRATION
- Place of performance
- U.S. Merchant Marine Academy (USMMA) 300 Steamboat Road, Kings Point, 11024
- PSC
- 59: ELECTRICAL/ELECTRONIC EQPT COMPNTS
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- 693JF717Q00037
- Notice ID
- af76de11c0cc5d224efcb4c82f3b89ed
Description
Since the document was unable to be uploaded, the purpose of the amendment/modification is to list the Testing Machine Specifications. Manufacturer: Instron Part No. 5969 Quantity: 1 Description: Model 5969 Materials Testing system, Capacity 50kN (5000 kg, 11250lb) Dual column table top electromechanical testing system including: -Integrated digital closed-loop control and data acquisition electronics including crosshead extension and load measurement channels -Test control panel with two softkeys, results display, start, stop and return functions, programmable function keys, test status indicators, variable speed job and specimen protection -Testing speed range: 0.001 to 600 mm/min (0.00004 in/min to 24 in/min) -Crosshead return speed: 600 mm/min (24 in/min) -Base adapter: Type D female fitting (0.5 in clevis pin) -Rigid coupling adapter, Type Dm (1.25 in) to Of (12mm connection) Part No. 5969-D1 Quantity: 1 Description: Voltage option 120 V Part No. 2910-056 Quantity: 1 Description: Heavy Duty Load Frame Support Table for All Dual Column Table Top Models, including extra high, extra wide versions. Provides convenient working height and leg room for operation while seated. Capacity: 679 kg (1500lb) evenly distributed load. Table top dimension: 762 x 1524 mm (30 x 60 in). Height adjustable from 635 to 813 mm (25 to 32 in). System Load Cell Part No. 5969-LB Quantity: 1 Description: Static Load Cell: 50 kN (5000 kg, 11250 lb) - Type Df Tension/Compression Type D female fitting (0.5 in diameter clevis pin Grips for Tensile Testing Part No. 2716-020 Quantity: 1 Description: Wedge Action Grips, Capacity: 50 kN (11250 lb, 5,000 kg) Temperature range: -70 C to -250 C (-100 F to 480 F) Maximum specimen size is face determined Upper and lower fittings: Type Dm (1.25 in connection with 1/2 in clevis pin) Includes a spacer that when removed, adds 5 mm to specimen thickness range listed in the faces section, i.e. 2703-151 would be 0 to 11.4 mm specimen thickness. Requires faces Part No. 2703-151 Quantity: 1 Description: Faces, Flat Serrated. 25 mm wide x 57 mm high (1.0 in wide x 2.25 in high). Flat specimen thickness range: 0 to 6.4 mm (0-0.25in). 16 teeth per inch Part No. 2703-154 Quantity: 1 Description: Faces, Vee Serrated. Specimen diameter range: 7.1 - 12.5 mm (0.3 in-0.5 in). 25 teeth per inch. Set of four faces Part No. 2716-011 Quantity: 1 Description: Specimen Centering Device for 2716-020 Wedge Action Grips Extensometer for Strain Measurement Part No. 2210-862 Quantity: 1 Description: Model 5900/5500A Sensor Conditioner Card. Provides closed loop control and data acquisition capability for optional transducers. Up to two may be added per system. For use with Instron Rationalized Transducers. Also accepts +/- 10 V DC input. For use with all 5500A and 5900 systems Part No. 2630-109 Quantity: 1 Description: Strain Gauge Extensometer, 1 in gauge length, +50%, -10% maximum strain. Static-rated with cross-braced design and cone-latch gauge length setting. U.S. Customary Calibration. Self-identifying only with 3300, 4200, 4300, 4400, 4500, 5500, 5800, 5900, 8500 and 8800 Series Systems. Operating temperature range -100 C to +200 C. 3 Point Bend Fixture Part No. 2810-400 Quantity: 1 Description: Flexure Fixture, 3-Point Bend, Capacity: 5 kN (1000 lb, 500 kg). ASTM D790, ISO 178, ISO 14125 Maximum Span: 194 mm (7.64 in) Minimum Span (4 mm anvil): 4 mm (0.16 in) Minimum Span (10 mm anvil): 10 mm (0.39 in) Temperature Range: -100 C to +350 C Upper fitting: Type Om (12 mm connection with 6 mm clevis pin) Lower: Type Dm (1.25 in connection with 1/2 in clevis pin) Upper Anvil: 10 mm diameter Lower anvil supplied, select either 2810-400A1 or 2810-400A2 System Software Part No. 2490-695 Quantity: 1 Description: Operator Dashborard for new 5900 Series Systems Operator Dashboard Includes: -Flat screen, industrial touch monitor -Full support for Bluehill Universal Materials Testing software -Cables and connectors -Standard VESA 100 mm interface to allow use of third party TV/monitor mountings if desired Part No. 2490-695B2 Quantity: 1 Description: 21.5 inch Touch Monitor option with integrated controller Includes 1 Ethernet port and wireless network adapter Part No. 2490-695M2 Quantity: 1 Description: Operator Dashboard arm mounting for table model systems with extruded column covers and T-slots. Feautres include: Height adjustable along column T-slot Rotation and tilt towards/away from operator Portrait/landscape orientation Part No. 2450-700 Quantity: 1 Description: Bluehill Universal Testing Software for NEW 5900 Systems Bluehill Universal is Instron's premier materials and components testing software package meeting the needs of a wide variety of applications including plastics, composites, metals, elastomers, biomedical, adhesives, textiles, components and others. Each application module provides the capability for tension, compression, flexure, stress-relaxation, creep, peel, tear and friction testing and test control based off of displacement, force or strain. Also included is Instron's complete calculation library with hundreds of different calculations such as modulus and ultimate tensile strength, as well as user-defined calculations. Bluehill's one-of-a-kind report generator allows users to create customozed report templates that can be linked with test methods and used to export test results via e-mail or save as HTML, Word or PDF. Raw data and result export files are completely customizable for enhanced compatibility with Laboratory Information Management Systems. Options for advanced test control, such as block loading, and data analysis, such as web camera recording, are also available. For Windows 7 Professional (32 or 64 Bit) or Windows 10 Professional (64 Bit only) operating systems (Win 10 recommended). Part No. 2450-700G1 Quantity: 1 Description: TestCam Video Recording and Playback Module The TestCam Video Recording & Playback option provides engineers and quality professionals with a video record of how the test was conducted and how the specimen failed, by recording the test from start to finish using almost any USB video recording device. After testing , the user can replay the test or use a scanning cursor to select particular points of interest while viewing of the associated test video frame. The video can be stored and sent electronically. Requires DirectX compatible video capture system (such as a webcam) with USB cable and camera mounting. Part No. 2490-852 Quantity: 1 Description: Logitech HD Webcam and flexible mount to EM T-slot Mounts in T-slot on frame column. Not suitable for extra-width dual-column systems For use with Bluehill TestCam Video Recording and Playback Module On-Site Installation & Training Part No. 1400-050 Quantity: 1 Description: System Installation & Integration Installation performed by an Instron factory & field trained Service Engineers/Representative. The system introduction can be provided for up to 3 operators. For larger numbers of operators, Instron Training classes are recommended. Some or all of the following activities will be performed subject to the system quoted and system configuration: -Set up of system -Safety Awareness & general testing safety precautions -Make all physical and electrical connections, except 3 phase power and water -Mount, install and test all peripheral fixtures and transducers, environmental chambers, and any major accessories that are supplied with the system -Check correct operation of the system -Check correct operation of all electrical components and mechanical assemblies and transducers (where fitted) -Configure controller and test for correct operation including all adjustments and tuning -Calibration & verification services are quoted separately. Basic System and Software Introduction -General instruction associated with any hardware elements of the system -Review basic operation manuals & any other related documentation Part No. 1450-055 Quantity: 1 Description: Enhanced Onsite Software Integration, Introduction to Bluehill Fundamentals & Test Method Development This integration level usually targets new Bluehill users or existing users with detailed applications needs, multiple test methods in use, and/or multiple operators using their systems. Integration includes: -Detailed onsite software operation & usage instruction for up to 3 operators -Instruction covering Bluehill user experience features (touch elements, support & BH differences when applicable) -Set-up of specimen parameters, test control parameter, report templates, results calculations setup for applications -Development or conversion up to 5 Test Methods -Overview of test method results & report -Review of user's application needs -Detailed testing of customer supplied speciments to validate/verify customer test methods and applications If applicable, integration of Instron supplied all-in-one controller and dashborad, including mountings and loading of software, as well as review and activation of Instron Connect, remote service tool will be included. Warranty (3 year full warranty) This service and support agreement for this system while under warranty should include the following services during the first year of system ownership Technical Support: -Priority telephone support during normal business hours -All software updates, but not upgrades, during the warranty period -Damaged CD replacement on warranted software -FAQ and literature access Web Support Agreement (WSA) should include the following: -Access to secure website under one user log-in -Priority support web based help desk -Access to scheduled Webinars, application & product information (English) -On-line access to calibration certificates, not currently available for CEAST systems and Instruments -E-mail notificatons of software update availability -Software updates available via internet download On-site Support: -Parts, labor and travel for repair
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
693JF717Q00037- Combined Synopsis
- 3×Combined SynopsisCurrentAug 9, 2017
Electro-Mechanical Testing Machine
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Laboratory Testing Services - 5-year contract (base and 4 option years) Analytical services for the chemical and/or biological analysis of soils, sediments, sludges, ground waters, surface waters and other materials required for identification, classification, qualification, and other environmental compliance purposes at Red River Army Depot (RRAD). | 49% | Combined Synopsis | 07/01/2026 |
Utility Critical Water Testing | 46% | Pre-Solicitation | 08/28/2026 |
Utility Critical Water Testing | 46% | Pre-Solicitation | 08/28/2026 |
The Government is seeking to acquire environmental testing services, using MIL-STD-810H procedures, in accordance with Attachment 1 - Statement of Work (SOW). To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed in the DESCRIPTION OF REQUIREMENTS section of the attached Combined Synopsis Solicitation. The Government will not consider quotes or offers for partial items or quantities. Please see all Attachments further descriptions, details, and instructions. Questions Due Date and Submission Requirements: All questions must be received before 26 May 2026 at 10AM, Pacific Time. Questions must be submitted via email to the Government RFQ Point of Contact listed below. Include RFQ# N66001-26-Q-6134 on all inquiries. Questions may be addressed at the discretion of the Government. RFQ Due Date and Submission Requirements: This RFQ closes on 26 May 2026 at 12PM, Pacific Time. Quotes must be submitted via the Solicitation Module within the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil, under Notice ID N66001-26-Q-6134. E-mail quotes or offers will not be accepted and late quotes will not be accepted. PIEE Assistance: For PIEE technical issues, see the Vendor Customer Support resources at https://cac.piee.eb.mil/xhtml/auth/web/homepage/vendorCustomerSupport.xhtml.Government RFQ Point of Contact: The point of contact for this solicitation is Trinity Anglo at trinity.l.anglo.civ@us.navy.mil. Reference RFQ# N66001-26-Q-6134 on all email exchanges regarding this acquisition. Amendment 01- To extend the response deadline to 1:00PM Pacific on 5 May 2026 to allow for competitive quotes. Amendment 02 - To extend the response deadline to 1:00PM Pacific on 8 May 2026 to allow for competitive quotes. Amendment 03 - To extend the response deadline to 12:00PM Pacific on 20 May 2026 and remove the small business set-aside. Amendment 04 - To extend the response deadline to 12:00PM Pacific on 26 May 2026 to allow for competitive quotes. | 46% | Combined Synopsis | 05/26/2026 |
Travis AFB intends to established a Firm Fixed Price contract for Hot Sticks and Gloves Testing. This will be a 5 year service contract. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and labor to test, inspect, and service necessary to test 127 pairs of gloves and 2 blankets every 6 months and 3 hot sticks once a year in accordance with the following ASTM/ANSI/OSHA of Electrical Hot Line Tools located at Travis Air Force Base (AFB), California. And any addtional requierments IAW the PWS. Following the contract award, services must commence within 30 days. Once items are shipped and received, the turnaround time for testing and returning them is strictly 30 calendar days. To be considered for award, offerors must concurrently submit a Technical Capability Sheet, an Independent Price Quote, and a completed Contractor Responsibility Verification; failure to submit all required deliverables at the time of submission will result in the package being deemed non-responsive and excluded from evaluation. PRICING AND INVOICING INSTRUCTIONS: The contractor shall quote a Firm-Fixed Price for the overall annual requirement under Parent CLIN 0001 (expressed as 1 LOT), which must equal the sum of the underlying Sub-CLINs (0001AA, 0001AB, and 0001AC). Partial Payments: Progressive (partial) payments are authorized. The contractor shall submit a separate invoice and Receiving Report in WAWF immediately following the completion, return shipment, and Government acceptance of each individual cycle (Sub-CLIN). Please see Solicitation Notice for more information and how this contract will be evaluated. | 45% | Combined Synopsis | 11/30/2026 |
Additional Details
Solicitation Number
693JF717Q00037
Archive Date
Sep 13, 2017