GovChime
Notice ID: f563879f4c6f44a895e34bca06ea76c1Combined Synopsis/Solicitation

Lidar Devices

Archived on October 4, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
September 10, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
Agency
Department of TransportationFEDERAL MOTOR CARRIER SAFETY ADMINISTRATION

Notice details

Office
693JJ4 OFFICE OF ACQUISITION MGT
Place of performance
Washington, DC, 20590
Last updated
Dec 4, 2025

Identifiers

Solicitation number
693JJ424Q000038
Notice ID
f563879f4c6f44a895e34bca06ea76c1

Description

FMCSA has a requirement for lidar devices capable of measuring and reporting vehicle speed, velocity and distance, including providing measurements of the distance or time between two vehicles sufficient for the enforcement of following too closely violations. It also has a requirement for training, calibration, and warranty services related to the use and implementation of said devices. OVERALL OBJECTIVE To assess whether further evidence can be generated supporting the use of lidar devices for enforcement of following too closely violations, FMCSA intends to acquire a sufficient number of camera-equipped lidar devices with headway gap measurement capability to make them widely available to enforcement officials serving with the Commercial Transportation Enforcement Division and Motor Carrier Safety Division of the Mississippi Department of Public Safety. SCOPE The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to conduct the work and provide the items and services described in the remainder of this document. This performance work statement details an acquisition requirement concerning lidar devices, as well as associated needs for both warranty and calibration services in addition to training on the use of the devices for the officers who will use them.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:693JJ424Q000038
  1. Combined Synopsis
  1. Combined SynopsisCurrentSep 10, 2024

    Lidar Devices

    Notice f563879f4c6f44a895e34bca06ea76c1 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
quantity:20TruSpeed SX BT dimensions: 5.2 x4.5 x2 weight:0.9lb range:2000ftwould like to receive within 30 days of contract award. Available to repair or replace within 10 hours while under warranty. 4 year warranty for hardware and software for product. Updated to increase solicitation time thru 3 JULY 26.
59%
Combined Synopsis07/04/2026
57%
Combined Synopsis11/06/2026
REQUEST FOR INFORMATION (RFI) SUMMARY: The Department of Homeland Security (DHS), Federal Emergency Management Agency (FEMA), Chemical Biological Radiological Nuclear Test and Evaluation Division (CBRN T&E), require assistance in understanding the current state of human portable RN ID devices. GENERAL INFORMATION: This RFI is issued solely for information gathering purposes to identify sources that can provide support for the CBRN T&E Komodo Dragon Characterization Test (KD CT) event. In accordance with FAR 15.101(c), RFIs may be used when the Government wants to obtain price, delivery, other market information, and capabilities for planning purposes. Responses to these RFIs are not offers and cannot be accepted by the Government to form a binding contract. This RFI shall not be construed as a commitment by the Government for any purpose, nor does it restrict the Government to an ultimate acquisition approach. Respondents are solely responsible for all expenses associated with their RFI response. Respondents will not receive additional information in response to their submittal to the RFI and will not be notified of the resulting market research. PROPRIETARY INFORMATION AND DISCLAIMERS: Respondents shall identify any proprietary information in its RFI response. Information submitted in response to this RFI will be used at the discretion of the Government. Further, the information submitted will remain confidential insofar as permitted by law, including the Freedom of Information and Privacy Acts. FEMA reserves the right to utilize any non-proprietary technical information in the anticipated PWS or solicitation. Although it is not necessary to address in their response, respondents shall be aware of any potential, actual, or perceived organizational conflicts of interest. Any real or potential conflicts must be sufficiently mitigated prior to a contract award. For further guidance, refer to the Federal Acquisition Regulation, Part 9.5. NAICS CODE: 334519 – Other Measuring and Controlling Device Manufacturing PRODUCT SERVICE CODE (PSC): 6665 (Hazard-Detecting Instruments and Apparatus) and 6695 (Combination and Miscellaneous Instruments) ANTICIPATED PERIOD OF PERFORMANCE START DATE: March 2027 ANTICIPATED ACQUISITION STRATEGY: N/A ATTACHMENT: See Attachment 1 RFI RESPONSE SUBMITTAL INSTRUCTIONS: RFI submissions should be limited to SPRDs, RIIDs, SBRDs, and other technologies as stipulated above to no more than two (2) pages that address all the listed bullets below. Interested parties may submit separate responses for more than one device. Responses must be in PDF format. In response to this RFI, the results of which will be used for the KD CT, interested parties should provide the following information regarding their human portable RN ID device(s): Company name and address; CAGE code; Unique Entity Identifier (UEI) number; Point of Contact (POC) name, title, email, and phone. Technical description of the device including detection method and device’s current TRL as it relates to the DHS definitions (see weblink above). Datasheet, photograph, and/or schematic of the device [not included in page count]. Availability of a replay tool in a “black box” executable format that allows for batch processing of synthetic spectral files for device(s). Ability to provide 6 units of each device for all tests or 3 units of each device if opting out of potential destructive tests. These will be submitted under Bailment Agreement terms to FEMA for testing. Specification of useful data returned in exchange for participating in this test campaign (applicable only to each vendor’s own devices). Any questions regarding the Directed Test Program and/or its KD test campaign (answers will be provided during a virtual Vendor Q&A Session on 9 December 2026, to be announced separately.) Interested contractors shall submit their RFI responses electronically to Issac Chapple, Contracting Officer, at Isaac.Chapple@fema.dhs.gov, no later than 12:00PM Eastern Standard Time (EST), 18 December 2026. Questions regarding this RFI are due no later than 4 December 2026 “RFI Response for CBRN T&E Komodo Dragon Directed Test” shall be in the subject line of your e-mail. All responses shall be unclassified, with proprietary information clearly marked. The document format shall be either Microsoft Word (.doc or .docx), or Adobe Acrobat (.pdf) formats. Pages shall be 8.5 by 11 inch and shall use a type pitch that is no smaller than a standard 11-point font type, with the exception of charts, graphs, or tables, which shall use a pitch not smaller than 10-point font. Responses shall not exceed 2 pages in length including images, data displays, charts, graphs, and tables. Page limitation does not include: 1 cover page. Do not include promotional materials. RFI Responses shall include the following information in the order below: A. Cover Page with the following information: 1. Company Name 2. Company Address 3. UEI Number 4. Company Point of Contact - Name, Title, Phone, and Email address 5. Statement of current business size status (i.e., HUBZone small business concern, service-disabled veteran-owned small business firm, 8(a) contractor, woman-owned small business, small business, or large business concern). Also, business size in relation to the NAICS code size standards assigned to this acquisition. 6. GSA Schedule Number, Contract Number, and Period of Performance and/or DHS Strategic Sourcing Vehicle Category Name and Contract Number, if applicable B. Contractor Capability Statement (No more than 2 pages in length) 1. Summarization of relevant projects showing capabilities 2. Past performance in applicable areas The responses received will assist FEMA with identifying the number and nature of the entities that consider themselves potential test participants. Each respondent, by submitting a response, agrees that any cost incurred in response to this RFI, or in support of activities associated with this RFI, shall be the sole responsibility of the respondent. FEMA shall incur no obligations or liabilities whatsoever, to anyone, for any costs or expenses incurred by the respondent in responding to this RFI. KD CT, will include Replicative Assessment of Spectrometric Equipment (RASE) and will give preference to vendors/devices with replay tools[1], incorporate a cyber security assessment, and start in the 2nd quarter of FY27. Additional RASE information is available on GitHub at https://github.com/LLNL/RASE#readme-ov-file. Replay tools allow CBRN T&E to process spectral data to determine the identification capabilities of the instrument. It should be noted by vendors that CBRN T&E plans to use injected data with the replay tool. Vendors should note there will be environmental and potentially destructive tests conducted during KD CT. Vendors may choose to opt out of potentially destructive tests without being excluded from other tests, with no data set being provided to the vendor for those tests. For the cybersecurity assessment, CBRN T&E will request copies (binary) of all communication software and mobile device applications used to configure, operate, or provide reachback/transmit detector information. Cyber testing will also include a vendor questionnaire to establish the baseline cybersecurity posture of the device(s) along with technical interchange meetings (TIMs) to clarify responses. Where applicable, CBRN T&E will perform a cooperative vulnerability penetration assessment on the device(s). CBRN T&E will also request a Software Bill Of Materials (SBOM) to establish supply chain risk/vulnerabilities associated with the supporting software developed for the SUT operations. The final KD products will inform FEMA’s and other FSLTT agencies’ future procurement of human portable RN ID devices and address requests from front line operators. The purpose of this RFI is to assist the KD test team in understanding the current state of human portable RN ID devices—spectroscopic personal radiation detectors (SPRDs), radioisotope identification devices (RIIDs), spectroscopic backpack radiation detectors (SBRDs), and other technologies that weigh less than 22 lbs (10 kg) and provide a response within two minutes of being exposed to a radiation source. The KD CT test will require 6 units of each device submitted for all testing during a this phase. Alternatively 3 units of each device may be submitted if a vendor chooses not to participate in potential destructive testing. For the CT phase, the KD team will review responses to this RFI and invite vendors to participate in the CT and cyber assessment. The KD test team is interested in learning of commercial off the shelf (COTS), Government off the shelf (GOTS), and prototype [total device technology readiness level (TRL) 7 and above according to https://www.dhs.gov/xlibrary/assets/product_realization_chart.pdf] human portable RN ID devices that offer performance capabilities that meet and/or exceed the ANSI and IEC requirements under which they are typically categorized. For each phase of the KD test campaign, the DT Program intends to pursue Bailment Agreements with providers to secure systems for its tests. Participating vendors will be provided with the data sets collected during KD as they pertain to their instruments. COMPANY-TO-COMPANY NON-DISCLOSURE AGREEMENT (NDA) Responses to this RFI will be reviewed by technical experts within DHS and other federal agencies. DHS uses support contractor personnel to assist in the review of RFI responses. The support contractors are bound by NDAs with the Government. Nonetheless, the Federal Acquisition Regulation (FAR) at Subpart 9.505-4(b) requires that whenever a Government contractor gains access to proprietary information of other companies in performing advisory and assistance services for the Government, the companies must agree to protect the information from unauthorized use or disclosure for as long as it remains proprietary and refrain from using the information for any purpose other than that for which it was furnished. The FAR further requires that the contracting officer obtain copies of these agreements and ensure that they are properly executed. Accordingly, any submission in response to this RFI that contains proprietary information must include a signed company-to-company NDA with the following companies: Mayvin, Inc. NDA requests should be directed to CWMD_NDA@mayvin.com Johns Hopkins University Nat Yi 240-228-2957 Nat.Yi@jhuapl.edu I3PG Patricia Pleasanton, FSO 813-760-1411 PPleasanton@i3pg.net The Government does not dictate the form or content of the NDA; that is a business decision between the companies. However, a sample NDA is included as an Attachment (See Attachment 2). Use of the sample agreement, or one substantially similar to the sample, will expedite signature. It is important for all respondents to understand that without signed NDAs with all above-named contractors, your RFI submission cannot be reviewed. It is the vendor’s responsibility to provide these signed NDAs in order to be responsive to this RFI. The companies named above are under no obligation or compunction to agree to other more onerous company-provided NDAs, and potential responders that submit onerous NDAs for signature assume the risk that the above-named companies will not agree to such terms. IMPORTANT NOTE: If your response to this RFI does not contain proprietary information, and is not marked as such, there is no requirement for the company-to-company NDAs. [1] A replay tool is vendor provided standalone software that processes recorded data with the same detection and/or identification algorithms as embedded in their instrument so as to generate analysis results (e.g., alarms, identifications) that reproduce those presented to the operator
45%
Market Research12/18/2026
The Naval Research Laboratory (NRL) hereby formally announces the intent to award a firm-fixed price purchase order on a sole source basis utilizing Simplified Acquisition Procedures in accordance with Federal Acquisition Regulation (FAR) Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of $350,000 to BLUE ROBOTICS INC. The contractor will be required to provide Remotely Operated Vehicle. (See Attached Inquiry of Availability). This Notice of Intent is NOT a request for competitive proposals. This is NOT a solicitation or request for offers. No solicitation package is available and telephone requests will not be honored. Only one responsible source and no other supplies or services will satisfy agency requirements. The North American Industry Classification System Code (NAICS) for this requirement is 334511 with the size standard of 1305. The Federal Supply Code (FSC) / Product Service Code (PSC) procurement is 6605. Interested parties may identify their interests and capability to respond to this requirement within 3 calendar days of the publication of this notice. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided. The point of contact is: Erik Wells, email: erik.wells2.civ@us.navy.mil. Please reference this Notice of Intent number on your correspondence and in the “Subject” line of your email.
36%
Special Notice11/16/2026
Disclaimer: This pre-solicitation notice is for information only, and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government will not reimburse the cost of any submission in response to this announcement – the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced separately on SAM.gov and all interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. Submission of a response to this notice does not constitute a request to be added to a bidders list or receive a copy of a future solicitation. Synopsis The U.S Navy must maintain and modernize to meet current and future operational requirements. The Portfolio Acquisition Executive Mission Systems (PAE MS) intends to issue the competitive solicitation N61750-27-R-1402 for an Indefinite Delivery Indefinite Quantity-Multiple Award Contract (IDIQ-MAC) for the procurement of AN/SPY-6(V) Hardware, Production, and Sustainment efforts. The Government intends to utilize the IDIQ-MAC to support current and future AN/SPY-6(V) systems and subsystems, including products and/or services to design, develop, fabricate, prototype, integrate, test, maintain, and support the multiple variants of the AN/SPY-6(V). The anticipated period of performance of the base period shall be approximately five (5) years from the date of contract award with the potential of a five (5) year ordering period option. The AN/SPY-6(V) Family of Radar (FoR) systems are designed to be scalable and adaptable across multiple ship classes and mission requirements. The AN/SPY-6(V)1, which is the Navy’s next generation radar system that will address Ballistic Missile Defense (BMD) and Air Defense (AD) capability gaps identified in the Maritime Air and Missile Defense of Joint Forces (MAMDJF) Initial Capabilities Document (ICD), will provide the capabilities defined by the AMDR Capabilities Production Document (CPD). AN/SPY-6(V)2, a rotating phased array, will be the primary radar for self-defense and situational awareness and the backup radar for ATC on NIMITZ class CVNs and large deck amphibious platforms. AN/SPY-6(V)3, a 3-face fixed phased array. EASR will be the primary air surveillance radar supporting ship self-defense, situational awareness and Air Traffic Control (ATC) for Ford Class Carriers (CVN 79+) and air defense for the Constellation Class Frigates. The AN/SPY-6(V)4 system is a variant of AMDR sized for retrofit into DDG Flight IIA ships to support modernization upgrades in Integrated Air and Missile Defense capability. Sources sought notices N00024-25-R-5510, N00024-25-R-551X, and N00024-25-R-55XX were issued related to this synopsis on SAM.gov and were most recently updated on 1 September 2026. A DRAFT solicitation, questions and the Government’s responses, and UNCLASS Government Furnished Information (GFI) has been made available. Please review the prior postings under SAM.gov Notice ID N00024-25-R-5510 and contact the POCs listed in order to receive access. It should be noted that merely expressing interest (to include any response generated by artificial intelligence) and/or failing to demonstrate your company’s ability to meet the requirements identified above will not be considered.
36%
Pre-Solicitation11/24/2026

Additional Details

Solicitation Number

693JJ424Q000038

Archive Date

Oct 4, 2024

Office Address

WASHINGTON, DC, 20590