GovChime
Notice ID: 987cf33219134bb1816aefb7557a4f6bSolicitation

Screening Information Request (SIR) for Runway Incursion Prevention through Situational Awareness (RIPSA)

Archived on May 22, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
Posted
March 10, 2021
Notice type
Solicitation
NAICS
334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
Agency
Department of TransportationFEDERAL AVIATION ADMINISTRATION

Notice details

Office
693KA8 SYSTEM OPERATIONS CONTRACTS
Last updated
Sep 25, 2026

Identifiers

Solicitation number
693KA8-21-R-00000
Notice ID
987cf33219134bb1816aefb7557a4f6b

Description

This public announcement is being issued in accordance with Section 3.2.1.3-11 of the Federal Aviaition Administration (FAA) Acquisition Management System (AMS). Industry is hereby informed that the FAA is seeking the commerical availability of a "direct to pilot" Runway Incursion Prevention system(s) for three (3) designated small to medium airports where existing surveillance technologies are not available. The FAA may award up to three (3) contracts, one for each of the three designated airports specified in SIR Section C.1.1. Potential venodrs are advised that: --This is a Screening Information Request (SIR) or Request for Proposals (RFP); --The FAA is not seeking or accepting unsolicited proposals; --The FAA will not pay for any information received or costs incurred in preparing the response to this SIR; --Any costs associated with responding to this SIR are incurred solely at the potential party's expense; and --The FAA, at its sole discretion, may contact one, some, all or none of the respondents to the SIR and ask for additional information; a formal evaluation of the vendor responses will occur and vendor participation in any informational session is not a promise for business with the FAA. --This is a developmental project; therefore, should the FAA elect to conduct business with a vendor, the requiremetnts are finalized based on the desired system capabilities identified respectively in the Scopt of Work and other sections of the SIR. --Any proprietary informaiton submitted must be adequately marked as proprietary and will be protected accordinly. --Offeror's company name and/or logo must NOT be embodied in any other page of proposal Volume I (Technical Proposal), other than the cover sheets for each section. If Offeror's company name is listed in any other pages than the cover sheets for each corresponding section this may result in disqualification of the offeror's proposal. Offeror Questions 1. Any question that an Offeror has regarding the content of the SIR package must be prepared in writitng and submitted to the CO. Questions should be identified and segregated by topic and must make reference to the applicable section or paragraph, if applicable (e.g., SIR Section H, Provision H-2, subparagraph a). 2. Offereors must use email for the submission of questions. Offerors must use the following address:vida.lee-olives@faa.gov. It is the Offeror's responsibility to verify that the CO has received the trasmission and may do so via read-receipt request. 3. The Government reserves the right to share the text of questions and the Government's responses with other Offerors and the general public, but the original submitter will not be identified. 4. All questions relating to this SIR must be received by the CO on or before April 2, 2021. Written inquiries received within the specified timeframe will be answered in writing prior to the required date for submittal of the Offeror's proposal. The FAA reserves the right to not answer any requests received outside of the above timeframe. Futhermore, Offerors must note that the proposal due date will not be exednded solely on the basis of questions received after te timeframe mentioned above. 5. The FAA will not provide verbal or witten responses to Offeror questions concerns, and clarification requests initiated via Offeror telephone calls. Please refer to the SIR for background and submission requirements. The technical and cost proposals must be emailed to vida.lee-olives@faa.gov by 4:00pm ET on May 7, 2021. Late submissions will not be evaluated. All communications with the Contracting Officer must be in writing. All inquiries should be submitted in writing to the Contracting Officer. Phone calls to the Contracting Officer will not be accepted. Interested vendors are requested not to contact the local airport authority at SAT, DAB or T?uS during the response period. Please see the attached SIR. Thank you for your interest in this FAA procurement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:693KA8-21-R-00000
  1. Market Research
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Market ResearchNov 5, 2020

    Request for Information (RFI) for Runway Incursion Prevention through Situational Awareness (RIPSA)

    Notice 9eccb63f24aa42119159ca6d1983a2a5 on SAM.gov

  2. 2×
    SolicitationCurrentMar 10, 2021

    Screening Information Request (SIR) for Runway Incursion Prevention through Situational Awareness (RIPSA)

    Notice 987cf33219134bb1816aefb7557a4f6b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. AMENDMENT 01 The following addendum is issued for Request for Quotation: 369006_X-Ray_Imaging_Detector_System. This amendment provides answers to supplier questions and clarifies the technical requirements and competition basis. This amendment must be acknowledged. Failure to acknowledge all amendments may make a proposal non-responsive. Suppliers shall confirm whether their previously submitted proposal remains unchanged. If the clarification results in a change, please submit a revised proposal. All other terms and conditions of the Request for Quotation remain unchanged. Supplier Questions and SLAC Responses 1. Is the detector intended for an industrial application or for research use, specifically X-ray diffraction? SLAC Response: The detector is intended for X-ray diffraction research. 2. Is this purchase replacing an existing detector? If yes, please provide the current detector model and original serial number so suppliers can confirm compatibility. SLAC Response: This purchase is not replacing an existing detector. However, part of the detector's purpose is to serve as a direct backup for LCLS, as needed, to reduce the risk of beamtime loss. The detector currently integrated for this application is the Varex XRD 4343CT-F22-C-000 Imaging Grade detector. 3. The solicitation states that the detector must be applicable for hard and high-energy X-ray diffraction greater than 20 keV. What operating energy range and shielding level are required for the intended application? SLAC Response: The required operating energy range is at least 20-100 kV. Shielding will be provided by the beamline. The detector window-to-sensor path must be non-metal. 4. Will SLAC consider an alternative detector with a 35 cm x 43 cm active area, rather than the stated minimum active area of 40 cm x 40 cm, if the remaining technical requirements are met? SLAC Response: No. Square geometry is required because of the diffraction-ring application, and the smaller detector dimension defines the usable area. The detector must also be a flat panel with a narrow depth of less than 10 cm due to space constraints, and the total weight must be less than 15 kg. 5. Will SLAC consider equivalent products from alternative manufacturers, provided the proposed product meets all technical requirements? SLAC Response: Not considered 6. Is the procurement a Small Business Set-Aside, or is it full and open competition? SLAC Response: This procurement is open competition and is not a Small Business Set-Aside. The follow has been attached for you to complete and review: Requested for Quote: Please provide a price and lead time quotation by 10/30/2026. Technical Evaluation Factors Listed Below: Applicable for hard and high-energy X-ray diffraction greater than 20 keV. Minimum active area of 40 cm x 40 cm. 150 micron pixel size. Amorphous silicon sensor. Flat-panel detector configuration. Required item(s) are listed below: XRD 4343CT-F22-C-000 Imaging Grade digital X-ray detector Quantity: 1 EA XRD-EPS 215W power supply Quantity: 1 EA XRD-EP AC cable Quantity: 1 EA XRD-EPS-B2 DC cable, 50 ft / 15.25 m Quantity: 1 EA XRD-FGX extension cable, 50 ft / 15.25 m Quantity: 1 EA XRD FG(E) OPTO - PCIe Frame Grabber V4 Quantity: 1 EA XRD-FGX-PC connection cable, 25 ft / 7.6 m Quantity: 1 EA Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable Method and best Lead-Time. Please provide a price and lead time quotation by 10/16/2026. Send quote to Cheryl.stafford@slac.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $15,000 unit price. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. Please include in your proposals the Harmonized Tariff Schedule (HTS Code) & Export Control Classification Number (ECCN) if applicable. Please state whether duties or tariffs are included in or excluded from the quoted price. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) as well as the SLAC General Terms and Conditions Supplemental Rider (Aug2026_Rev1) will be made a part of the resulting order. Please markup terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 Domestic Suppliers - Freight terms will be FOB Destination Prepaid and Add. Foreign Supplier - Shipment will be made CIP SLAC, Menlo Park, and Duty Unpaid. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind Regards, Cheryl Stafford cheryl.stafford@slac.stanford.edu
46%
Solicitation10/30/2026
The Noninvasive Acoustic Pressure Measurement technology from Los Alamos National Laboratory allows users to determine the pressure inside a sealed container or pipe without opening it, puncturing it, or installing a permanent gauge. The system briefly attaches small devices to the outside of the container, gently vibrates it, and measures how it responds. Because a container’s vibration behavior changes depending on the pressure inside, software can translate those measurements into an accurate pressure reading in just a few minutes. The equipment is portable, relatively low cost and designed for quick “spot-check” use. This provides a safe and practical solution for industries that need to assess pressure in sealed systems—such as gas cylinders, industrial piping, hazardous material storage or waste containers—especially when gauges are missing, unreliable or impractical to install. The Challenge: Many industries rely on sealed containers and piping systems where knowing the internal pressure is critical for safety, performance and compliance, yet existing methods typically require built-in gauges, system penetration or prior calibration—options that are not feasible when gauges fail, are absent or when the contents are hazardous or unknown. Noninvasive Acoustic Pressure Measurement addresses that gap by using externally applied vibration sensors to stimulate and measure the natural resonance behavior of a vessel, which shifts in measurable ways with changes in internal pressure. Problems Solved: By analyzing a container’s natural vibration patterns using advanced data processing and machine learning trained on comparable systems, Noninvasive Acoustic Pressure Measurement enables accurate estimation of internal pressure entirely from outside a sealed structure. It eliminates the need to open, puncture or permanently instrument vessels, addressing long-standing challenges in situations where pressure gauges are missing, damaged, unreliable or impractical to install. As a result, it provides a safe, noninvasive way to assess sealed systems that were previously difficult, risky or impossible to evaluate—improving safety, reducing operational disruption and expanding inspection capabilities across a wide range of applications. Key Advantages: Fully noninvasive—no puncturing or opening required No need for built-in gauges or baseline calibration Rapid measurements (minutes per assessment) Portable, field-deployable system High accuracy across a broad pressure range Improves safety when handling hazardous or unknown contents Market Applications: Aerospace & Defense Chemical & Materials Processing Energy & Utilities Environmental & Waste Management Food & Consumer Products Industrial & Manufacturing Development Status: TRL 4 US Patent pending LA-UR-26-21397 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
46%
Special Notice03/15/2026
SBIR Phase I Proposal #B201B-0010. Point of Source Sewage Treatment Device. FHNC Ltd. Co.
46%
AwardedOpen
Portfolio Acquisition Executive (PAE) Mission Systems is issuing a Full and Open Competitive Solicitation (N00024-26-R-5246) for the development, production, integration, testing, fielding, and lifecycle sustainment of the U.S. Navy Electronic Chart Display and Information System (ECDIS) Hardware and Software. This procurement supports PAE Mission Systems structure, the acronym “PMW/A” means Program Manager, Warfighting / Applications (PMW/A 520) Navigation Program requirements for both surface and subsurface platforms. The resultant contract will provide continued production and sustainment of Navy ECDIS Hardware and Software. Hardware Scope: Includes production, sustainment, integration, assembly, and testing. Software Scope: Includes maintenance, modification, upgrades, integration, testing, and delivery of ECDIS software products. These software scope activities will be provided as level-of-effort tasks under Government oversight, with technical support from the Navy ECDIS Systems Engineering and Integration Agent, NSWC Philadelphia, PA. Award is anticipated in Q4 FY27 and will be made to the Offeror whose proposal represents the Best Value to the Government in accordance with FAR 15.101‑1. The planned contract structure includes one base year with four one‑year option periods, beginning in FY27. Deliveries are anticipated to be FOB Destination.
41%
Solicitation01/13/2027
1. DESCRIPTION The Naval Sea Systems Command (NAVSEA) intends to issue a Full and Open Competitive Solicitation (N00024-26-R-5246) for the development, production, integration, testing, fielding, and lifecycle sustainment of the U.S. Navy Electronic Chart Display and Information System (ECDIS) Hardware and Software. This procurement supports PEO IWS 6.0 Navigation Program requirements for both surface and subsurface platforms. The resultant contract will provide continued production and sustainment of Navy ECDIS Hardware and Software. Hardware Scope: Includes production, sustainment, integration, assembly, and testing. Software Scope: Includes maintenance, modification, upgrades, integration, testing, and delivery of ECDIS software products. These software scope activities will be provided as level-of-effort tasks under Government oversight, with technical support from the Navy ECDIS Systems Engineering and Integration Agent, NSWC Philadelphia, PA. Award is anticipated in Q4 FY27 and will be made to the Offeror whose proposal represents the Best Value to the Government in accordance with FAR 15.101‑1. The planned contract structure includes one base year with four one‑year option periods, beginning in FY27. Deliveries are anticipated to be FOB Destination. 2. BACKGROUND The Navy ECDIS is fielded on all U.S. Navy ships and submarines as the Navy’s primary navigation plotting system. It integrates inputs from multiple sensors to provide accurate ship positioning and ensure safe navigation. Historically, these requirements were fulfilled under two separate contracts: Software development: N00024‑18‑C‑5216 Hardware production: N64498‑21‑G‑4003 This solicitation consolidates both into a single competitive procurement. 3. SUBMISSION INSTRUCTIONS A Draft Request for Proposal (RFP) will be made available no later than 31 July 2026 and will be provided to all interested parties who request access per the instructions in the attached “ECDIS DRAFT Solicitation Document Access” form. Industry feedback is strongly encouraged and will be considered during preparation of the final RFP. The Government intends to require electronic proposal submission exclusively through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module at https://piee.eb.mil. Offerors are strongly encouraged to ensure their organization has an active PIEE account and that the Proposal Manager role is approved prior to the Final RFP release. A vendor registration guide for obtaining access to the PIEE Solicitation Module is posted at: https://dodprocurementtoolbox.com/site-pages/solicitation-module. 4. Access Control Notice While the Draft RFP and the Final RFP will be available to all interested parties on SAM.gov, access to the controlled Final RFP attachments and the Government’s Offeror’s Library will be restricted. Only those business entities formally identifying and bidding as a Prime Contractor will be granted access to these controlled RFP attachments and the Government’s Offeror’s Library. Subcontractors and lower-tier vendors must obtain any controlled Final RFP attachments or access to the library directly through their respective prospective Prime Contractor. 5. DISCLAMER This Pre‑Solicitation Notice is issued for planning purposes only and shall not be construed as an invitation for bid, request for quotation, or Request for Proposal. It does not obligate the Government to award a contract or authorize negotiations. No entitlement to payment of direct or indirect costs will arise from responses to this announcement. All industry comments and questions submitted in response to this notice may be treated as public information and may be posted on SAM.gov. The Government does not commit to responding to comments or questions. Any revisions to RFP documents based on industry feedback remain solely at the Government’s discretion. No inquiries shall be made to any Government personnel other than the points of contact identified in this synopsis.
41%
Pre-SolicitationOpen

Additional Details

Solicitation Number

693KA8-21-R-00000

Archive Date

May 22, 2021

Office Address

WASHINGTON, DC, 20591