GovChime
Notice ID: 4d0c646e63e949738b7039a65695301cSolicitation

Seawall Repair Leeville LA

Archived on June 16, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−05:00
Posted
June 15, 2023
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
238120: Structural Steel and Precast Concrete Contractors
Agency
Department of TransportationFEDERAL AVIATION ADMINISTRATION

Notice details

Office
6973GH FRANCHISE ACQUISITION SVCS
Place of performance
LA
Last updated
Dec 4, 2025

Identifiers

Solicitation number
6973GH-23-Q-00133
Notice ID
4d0c646e63e949738b7039a65695301c

Description

The Federal Aviation Administration (FAA) has a requirement for the Sea Wall Repair and associated work in Leeville, LA. Please see attachments for specifics. The Contractor shall provide all labor, materials, equipment, transportation, insurance, notifications, licenses, permits, fees, and supervision necessary to perform the work described in the attached Scope of Work and other attachments posted to this announcement. The Acquisition Management System (AMS) applies to FAA in place of the Federal Acquisition Regulation (FAR) and various other provisions of Federal acquisition law. It is anticipated that a firm-fixed-price type construction contract will be awarded as a result of this solicitation (SIR). All questions regarding the project/scope of work/plans must be received in writing to Turner Hart @ turner.m.hart@faa.gov no later than 5:00 p.m. CST on June 05, 2023 to allow for responses to be provided prior to due date for receipt of proposals. Contractors must be registered with the System for Award Management, www.sam.gov on the date established for receipt of offers June 16, 2023. Reference AMS Clause 3.3.1-33, paragraph (d), if the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered Offeror. In addition, offerors must complete and return the attached forms by closing date. The forms are provided as separate documents under this announcement. The FAA reserves the right to review and verify each offeror's program eligibility. E-mailed proposals must be received by Turner Hart, @ turner.m.hart@faa.gov, no later than 5:00 p.m. CST, June 16, 2023 and must contain 6973GH-23-Q-00133 as part of the e-mail subject line. Any responses received after 5:00 p.m. CST, June 16, 2023, may not be considered in accordance with AMS provision 3.2.2.3-14, Late Submissions, Modifications, and Withdrawals of submittal vendor's response may be determined ineligible. As the FAA does not utilize sealed bidding contracting techniques, a public bid opening will not be held. Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the SIR process. This SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of proposals. Inquiries regarding this SIR/RFO should be directed to Turner Hart, Contract Specialist, @ turner.m.hart@faa.gov

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:6973GH-23-Q-00133
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    SolicitationCurrentMay 17, 2023

    Seawall Repair Leeville LA

    Notice 4d0c646e63e949738b7039a65695301c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY AND YOUR RESPONSE IS NOT AN OFFER. SERIOUS INQUIRIES ONLY AND SUBMISSIONS MUST BE FROM A US-BASED CONTRACTOR. THIS IS NOT A REQUEST FOR QUOTES (RFQ). NO SOLICITATION IS AVAILABLE AT THIS TIME. THIS REQUEST FOR INFORMATION DOES NOT COMMIT THE GOVERNMENT TO PAY ANY COSTS INCURRED IN PREPARATION OF ANY SUBMISSION TO THIS NOTICE, OR TO CONTRACT FOR ITEMS/SERVICES. This Request for Information (RFI) is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI marked Proprietary will be handled accordingly. Responses to the RFI will not be returned. Information provided in response to this RFI will be used to assess tradeoffs and alternatives available for determining how to proceed in the acquisition process for a solution. In accordance with RFO 15.101(c)(2), responses to this RFI are not offers and cannot be accepted by the Government to form a binding contract. BACKGROUND/PURPOSE: The U.S. Army Corps of Engineers (USACE) Engineer Research and Development Center (ERDC) is conducting market research to determine sources’ competencies and capabilities to execute the on-site fabrication and final assembly of a three-bay, monolithic reinforced concrete High-Performance Magazine (HPM) structure. This is for a test structure for experimental purposes only and in the course of testing the structure will be completely destroyed and the site will be retrograded. The scope requires the full, in-situ assembly of the HPM structure at a designated Government test range at Fort Polk, LA. The process involves mobilizing all materials and equipment to the site, erecting temporary formwork systems, installing reinforcing steel cages, and placing concrete to form the final test structure according to the attached Description of Requirement (DOR). This is not a pre-cast or modular system; the final deliverable is the fully assembled and cured structure fabricated at its final location. The primary materials to be procured and processes to be performed are listed below. Reinforcing Steel (Rebar): Procure, deliver, and install prefabricated steel reinforcement into a intergrated cage within the formwork Cast-in-Place Concrete: Procure and received ready-mix concrete; place material into the erected formwork; perform consolidation, finishing and curing. Structural Sand Fill: Procure, deliver, and install sand into desiginated wall cavities post-concrete. Concrete Formwork: Fabricate or procure formwork panels; perform on-site erection, bracing, and subsequent stripping of the complete system for walls, slabs, and doors. Reinforced Concrete Doors: Perform on-site formwork erection, rebar installation, and concrete placement for three separate door components. Embedded Items: Procure and install all required embeds, sleeves, and plates within the formwork prior to concrete placement. A DRAFT Description of Requirement (DOR), which includes a detailed description of the structure, is attached. Please note this is subject to change. The purpose of this Request for Information (RFI) is to obtain information on the availability and capability of vendors to procure the necessary raw materials, provide shipping of materials and equipment to Fort Polk, LA, and perform the complete on-site fabrication and assembly of the structure to specification. Additionally, this RFI seeks to determine industry interest in participation for market research purposes before a Request for Quote (RFQ) is released for these requirements. Not responding to this RFI does not preclude participation in any future RFQ or RFP, if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. Respondents are requested to review the attached DRAFT DOR and submit responses to the following questions: 1. Contact information: Interested organizations should respond by providing the Government the following information: Company name, Address, Point of Contact, business title, Telephone number, Email address, Company Cage Code, Primary NAICS, Business Size, i.e., Large, Small (if small, state your category). Current Registration in SAM, Webpage address. 2. Capabilities Statement: A description of capabilities in providing 1) the minimum required items and capabilities described in the RFI and Draft DOR to the specified location(s) and 2) Experience. Previous procurement information, including contract numbers and customers, is recommended. 3. Business Status (based on NAICS 238120): Please indicate the business status of your company (Socio-Economic Factors: 8(a), HUBZone, Service-Disabled Veteran-Owned Business, Small Disadvantaged Business etc.). 4. Answer the following Questions: All interested contractors are requested to provide comprehensive written responses to the questions below. Question #1- Project Experience: Provide at least two (2) and no more than four (4) examples of projects completed by your company within the last 7 years that are of a similar scale and complexity to the HPM structure. For each project, provide the following details: Project Name and a brief description. Final concrete compressive strength(s) and total cubic yards placed. Approximate final reinforcing steel density (lbs/CY). A summary of your company's role (e.g., Prime Contractor, Concrete Subcontractor). Question #2- Self-Consolidating Concrete (SCC) Experience: The requirement is for 10,000 PSI SCC. Describe your company's experience with high-strength SCC. Specify your approach to: Mix design submittal and verification. Managing the high fluid pressure of SCC on formwork systems. On-site Quality Control testing Question #3- Formwork Systems: This project requires a robust, engineered formwork system. Does your company have in-house engineering capability to design and develop formwork plans, or is this service subcontracted? Please describe a challenging formwork scenario your company has successfully managed on a past project. Question #4- Reinforcing Steel: The project specifications require continuous, non-spliced rebar in many areas. Describe your company's experience and methods for installing long, heavy, and continuous reinforcing steel in congested, multi-layered wall and slab assemblies. Question #5- Core Competencies (Self-Perform vs. Subcontract): Please indicate which of the following core activities your company typically self-performs versus subcontracts: Heavy Concrete Formwork Design and Erection Reinforcing Steel Installation Concrete Placement and Finishing Earthwork and Site Logistics Materials QC Testing Question #6- Overall Capability: After reviewing the Description of Requirement, does your company have the capability to procure all materials and fully execute the on-site fabrication and assembly of the HPM structure as specified? If not, please specify which items or processes cannot be provided and why. Interested vendors must provide the above information no later than 3:00 PM Central Standard Time (CST) on 04 November 2026. Responses must be emailed to Shinita Jordan at Shinita.M.Jordan@usace.army.mil AND Sonia Boyd at Sonia.J.Boyd@usace.army.mil. Any questions related to this notice must be submitted in writing to Shinita Jordan and Sonia Boyd. Verbal questions will NOT be accepted. The Government will not reimburse companies for any costs associated with the submissions of their responses.
-Market Research11/04/2026
-AwardedOpen
Project: 2026-2027 Winter Shotcrete Repair at Eisenhower Lock in Massena, NY. This acquisition is solicited as a 100% Total Small Business Set-aside. NAICS Code: 238110, Poured Concrete Foundation and Structure Contractors, Size Standard -$19,000,000.00. This acquisition will be awarded in accordance with FAR RFO Part 12. Quoters must be registered in the System for Award Management (www.sam.gov.). Site Visit: October 21, 2026, 10:00am EST. See Site Visit Instructions (Page 27 of RFQ). Questions due: October 23, 2026, 2:00pm EST. Email to: chora.snyder@dot.gov Quotes due: November 04, 2026, 2:00pm EST. Email only to: chora.snyder@dot.gov
-Combined Synopsis11/04/2026
-AwardedOpen
This is a SOURCES SOUGHT notice; a market survey for information only, to be used for preliminary planning purposes. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT WILL BE AWARDED FROM THIS NOTICE. No reimbursement will be made for any costs associated with providing information or industry response to this notice or any follow up information requests. Not responding to this notice does not preclude participation in any future procurement. If a solicitation is released, it will be synopsized in the System for Award Management (SAM). It is the responsibility of potential offerors to monitor SAM for additional information pertaining to this requirement. The acquisition strategy will be determined based on responses received from this notice and/or other market research methods. The planned acquisition strategy will be posted in SAM upon completion of market research analysis. The purpose of this notice is to gain knowledge of interest, capabilities and qualifications of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), or Women-Owned Small Business (WOSB). All are highly encouraged to respond. The U.S. Army Corps of Engineers (USACE), Fort Worth District, intends to solicit and award a contract for site and preparatory construction work associated with an unmanned ILS. The anticipated acquisition will be a competitive, firm-fixed-price (FFP), design-bid-build (DBB), definitive contract. The procurement will be conducted in accordance with RFO 15.103-3, using the Highest Technically Rated with a Fair and Reasonable Price evaluation approach. The Government is seeking experienced firms to perform site preparation and construction work associated with an unmanned ILS site. The site will accommodate three primary elements of Government-Furnished, Government-Installed (GFGI) electronic equipment under a separate contract: a directional localizer, a glide slope indicator, and radio marker beacons. The scope of work includes demolition; rerouting existing drainage systems and utilities, as necessary; installation of new utility service lines; gate installation; and site filling and finish grading to support the subsequent installation of the ILS equipment. The target price range for this project is between $7.8M and $8.4M. This project is subject to Minor Military Construction (MILCON) funding and Statutory Limitations - Offerors are advised that this requirement is funded as an Unspecified Minor MILCON (UMMC) project in accordance with (IAW) 10 U.S.C. § 2805. Because this project relies on Minor MILCON funding, total project costs are strictly limited by federal statute. Proposals must and will be evaluated IAW this statutory policy. The Government cannot and will not make an award if the proposed price exceeds the applicable legal thresholds for UMMC projects. The estimated Period of Performance is 365 calendar days. The North American Industry Classification System code (NAICS) for this procurement is 238910 –Site Preparation Contractors, which has a small business size standard of $19.0M. The Product Service Code is Y1PZ – Construction of Other Non-Building Facilities Respondents are reminded that all construction performance must follow the USACE Safety and Health Requirements Manual (EM 385-1-1), and must also comply with all Federal, State and local laws, ordinances, codes and/or regulations. Anticipated solicitation may be issued within 2nd Quarter of Fiscal Year 2027 with an estimated award between 3rd and 4th Quarter of Fiscal Year 2027. Small Businesses are reminded that RFO clause 52.219-14 – Limitations on Subcontracting will be applicable to this contract; and to pay specific attention to paragraphs (e)(3) and (g). (e)(3) For General Construction, it (the contractor) will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded. (g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants. (1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions. (2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions The Supplier Performance Risk System (SPRS) is the Department of Defense, single, authorized application to retrieve supplier performance information. SPRS is a web-enabled enterprise application that gathers, processes, and displays data about the performance of suppliers and must be completed prior to an award in accordance with DFARS 204.76, DFARS 252.204-7020, DFARS 252.204-7024 and DoDI 5000.79. Review NIST SP 800-171 for further information. Contractors are required to achieve, at the time of award, a level 1 Cybersecurity Maturity Model Certification (CMMC). Contractors are required to maintain a current (ie., not more than 3 years old) CMMC at the specified level throughout the life of the contract. See Provision 252.204-7025 and DFARS Clause 252.204-7021. Responses from firms interested in this notice shall not exceed 10 pages and shall include the following information: 1. Firm’s name, UEI #, CAGE Code, address, point of contact, phone number, and e-mail address. 2. Firm’s interest in bidding on the solicitation when it is issued. 3. Firm’s experience to perform the magnitude and complexity outlined in the Scope of Work above by providing: Brief description of the project, customer name, and dollar value of the project – provide UP TO 3 examples. 4. Firm’s Business Size – LB, SB, 8(a), HUBZone, SDVOSB, or WOSB. 5. Will the firm submit a response as a Joint Venture or other arrangement? If YES, specific type: Joint Venture, Mentor-Protégé, Teaming Arrangement, or Other 6. Firm’s Bonding Capacity (construction bonding level per contract and aggregate construction bonding level, both expressed in dollars). This announcement and all information will be issued via the Government Point of Entry, Procurement Integrated Enterprise Environment and Offerors must be active in SAM to be eligible for award of Government contracts. Award will not be issued to non-compliant offerors until SAM Registration is complete, otherwise offerors will not be eligible for award. Interested Firms shall respond to this notice no later than November 2, 2026, at 2:00pm, Central Standard Time. Email your response to Christine Noriega, Contract specialist at christine.noriega@usace.army.mil and Shayla J. Lucas. Contracting officer at shayla.j.lucas@usace.army.mil
-Market Research11/02/2026

Additional Details

Solicitation Number

6973GH-23-Q-00133

Archive Date

Jun 16, 2023

Office Address

OKLAHOMA CITY, OK, 73125