GovChime
Notice ID: 0633f4dc83b54a5fa3e1e52bff76c540JustificationAwardedArchived

CM-300/350 V2 Repairs

Awarded on April 1, 2026. Full description on SAM.gov.

Overview

Posted
November 18, 2025
Notice type
Justification
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of TransportationFEDERAL AVIATION ADMINISTRATION

Notice details

Office
6973GH FRANCHISE ACQUISITION SVCS
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov
Award date
Apr 1, 2026
Award amount (SAM.gov award notice)
Not specified

Identifiers

Solicitation number
6973GH-26-J-CM300350
Notice ID
0633f4dc83b54a5fa3e1e52bff76c540

Description

Title of Procurement

This is a proposed single-source contract with General Dynamics Mission Systems (GDMS) for repair services for the Federal Aviation Administration’s (FAA) CM-300/350 V2 Transmitters and Receivers. 

Program Office and Point of Contact

The FAA Logistics Center Automation/ Communications Product Division, AJW-L800 has been designated by the Federal Aviation Administration (FAA) to be the office of prime responsibility for the logistics support of the CM-300/350 V2 Transmitter and Receiver programs, as part of the National Airspace System (NAS) Air/Ground Communications Infrastructure. 

Nature of Procurement Action

The requirement is for the repair of the following:

Description

NSN

Part No.

CM-300 V2 UHF Receiver

7025-01-616-3152

01-P57301R002

CM-300 V2 UHF Low Power Transmitter

7025-01-616-3056

01-P57601R002

CM-300 V2 VHF Receiver

7025-01-616-3035

01-P57201R002

CM-300 V2 VHF Low Power Transmitter

7025-01-616-3058

01-P57400R002

CM-350 V2 VHF High Power Transmitter

7025-01-616-3128

01-P57501R002

An indefinite-delivery/requirements type contract for a 1-year base period with 4 additional option year periods will be used for this acquisition.

Description of Supplies/Services

This is a contract for repair services for the equipment types listed in section 3. This will enable AJW-L to continue support for the CM-300/350 V2 radios that provide voice contact between air traffic controllers and aircraft both in flight and navigating airport runways and taxiways. Actual quantities will be dependent upon field demand. This contract will operate in parallel with contract DTFAWA-12-C-00040, owned by AJM-313 Air to Ground Voice Communication Program Office, which provides acquisition and repair support for the NEXCOM II program. These radios are covered by a 10-year warranty and all costs covered by AJM-313. AJW-L800 has a waterfall list of radios with warranty end dates that will be covered by this contract. AJW-L800 will coordinate with AJM-313 to ensure repairs performed under each contract comply with the appropriate funding laws.

According to FAA Integrated Logistic Support policies, systems must be supported by the Program Office utilizing Facilities and Equipment (F&E) funds for the first year and the remainder of the next Fiscal Year. During the Installation phase and the F&E period the Program Office is responsible to include these installations in the FAA Corporate Work Plan and prepare the proper documentation for the Transition to Operations and Maintenance (TOM) process. Once the F&E period is completed the system funding responsibility transfers to the Maintenance Support Program (MSP). This contract will provide support for the non-warranty repairs performed under MSP fund support.

Authority

Authority for single source procurement is provided by AMS policy section 3.2.2.4.

Market Analysis

A recent market survey was posted on SAM.gov (Notice ID: 6973GH-26-M-CM300350) and was open to the public from October 7, 2025, to October 21, 2025. Only two vendors expressed interest in performing the repairs. Upon evaluation, it was determined that the first vendor lacked the capability to perform radio repairs. The other vendor was initially capable, further discussions with GDMS revealed that the testing required proprietary software exclusive to GDMS. Consequently, this vendor declined to proceed with pursuing the repairs. Use of any other vendor would require extensive work to produce new work instructions and the new repair processes will require extensive qualification by OKCET and AJW-L800. It is not believed that these efforts will produce a satisfactory repair process due to the lack of intimate knowledge and access to the design and testing data owned by GDMS.

Rationale Supporting Use of a Single Source

The initial CM-300/350 V2 radio purchase contract (NEXCOM II) was a competitive acquisition. Source selection was based on best value to the Government. The contract was awarded to GDMS for modified Commercial Off the Shelf CM-300/350 V2 radios. GDMS continues to produce radios under this contract and for non-government customers. GDMS is the sole owner of the technical and intellectual data regarding these radios. This data is protected under current US Patents and GDMS will not share this data since it is still part of their production units and substantial sections are used in the follow on and other radio types.

The reliability of these radios is of critical importance. Being the direct communication link between Air Traffic Controllers (ATC) and active aircraft. As such the safety of all passengers and crew on these aircraft depends on quality communications between the aircraft and the ATC for aircraft both in flight and on the ground/ GDMS as the designer and manufacturer of these radios is the only qualified repair source.

AJM-313 Air to Ground Voice Communications Office, AJW-153 Oklahoma Communications Engineering Team (OKCET) and AJW-L800 Automation and Communications Product Group meet with GDMS regularly to discuss production, repair, and performance issues. As part of these discussions, software upgrades are produced, qualified, and installed on the radios. Since GDMS performs these upgrades as part of their repair process, they would be the only repair source that possesses the most current updates.

  • Impact.  Use of repair sources other than GDMS will require post-test and other confirmation activities, some of which would require development of processes and instructions outside the proven processes currently performed by GDMS. These processes would have to be developed without reference to any proprietary information.
  • Specialized Expertise.  As stated above, the technical and intellectual data concerning the design, manufacture and performance of the CM-300/350 V2 radios is owned by GDMS. Since this data is integral to current production units and used in potential future products as well as commercial production models, GDMS will not sell or share this data.
  • Patents, Proprietary Data, and Unique Items.  GDMS is the sole owner of the intellectual, and technical information concerning the CM-300/350 V2 radios. The radios also contain proprietary software developed and maintained by GDMS.

Other Facts Supporting Use of Single Source

Future acquisition efforts are in process. These are competitive acquisition efforts and may produce new contractors. In this case the new systems will utilize most likely be protected by the same protections described here by the new contractor.

Full description on SAM.gov

Award Overview

Award Number

6973GH-26-J-CM300350

Award Amount (SAM.gov award notice)

Not specified

Award Date

Apr 1, 2026

Awardee

Not specified

Original Solicitation

Notice ID: 0633f4dc83b54a5fa3e1e52bff76c540

Posted Date: Nov 18, 2025

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3JustificationArchivedCurrent

    CM-300/350 V2 Repairs

    Notice 0633f4dc83b54a5fa3e1e52bff76c540 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
86%
Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
86%
Market Research12/07/2026
Naval Information Warfare Center (NIWC) Atlantic intends to award a Firm Fixed Price purchase order to CoastTec LLC, 1533 Progress Way, Suite 113 Eldersburg MD 21784. The Government has a requirement for the following Part Number(s)/Quantity: SURT10000XLI, (Quantity 5); for Power Supply repairs. The applicable NAICS code is 811210, PSC J059. This action is conducted under the authority of RFO 12.201-1 Simplified procedures.This is a notice of intent and is not a request for competitive quotes. Interested firms must identify their interest and capability to provide the services identified no later than three (3) days after this notice posts. A solicitation will not be posted. A determination by the Government not to compete this proposed order based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct competitive procurement. Responses to this announcement may be submitted to Tenisha.b.hampton.civ@us.navy.mil.
84%
Pre-Solicitation09/28/2026
Naval Information Warfare Center (NIWC) Atlantic intends to award a Firm Fixed Price purchase order to ECI Defense Group, 7654 Highway 7 Lyles, TN 37098. The Government has a requirement for the Repairs of 23190.16-2 (Quantity 3). The applicable NAICS code is 811210, PSC J059. This action is conducted under the authority of FAR 12.102(a) soliciting from a single source under the Simplified Acquisition Threshold (SAT). This is a notice of intent and is not a request for competitive quotes. Interested firms must identify their interest and capability to provide the services identified no later than one (1) day after this notice posts. A solicitation will not be posted. A determination by the Government not to compete this proposed order based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Responses to this announcement may be submitted to Tenisha.b.hampton.civ@us.navy.mil.
82%
Pre-Solicitation07/02/2026
The contractor shall provide all management, tools, equipment, and labor necessary to test, evaluate, repair, and restore F-16 UCADC components to a serviceable Condition Code A in accordance with OEM specifications, approved Technical Orders (TOs), and USAF engineering dispositions. Cosmetic restoration to like-new appearance is not required. These are Just-In-Time (JIT) unprogrammed repairs to maintain operational readiness and meet required turnaround times.Applicable Items: NSN 5998-01-399-5953 | P/N 8518945-902 | Circuit Card Assembly NSN 5998-01-399-8603 | P/N 8518948-903 | Circuit Card Assembly NSN 5998-01-399-8605 | P/N 8518951-902 | Circuit Card Assembly NSN 6130-01-410-9195 | P/N 8518938-902 | Power Supply Assembly NSN 6685-00-149-1026 | P/N 4007515-903 | Pressure Transducer NSN 6685-00-259-3013 | P/N 4007515-902 | Pressure Transducer NSN 5998-01-406-3089 | P/N 8518937-901 | Circuit Card Assembly NSN 5998-01-406-3087 | P/N 8518983-903 | Circuit Card AssemblyFor further details, please see the attached sources sought synopsis PDF.
81%
Market Research11/20/2026

Additional Details

Solicitation Number

6973GH-26-J-CM300350

Archive Date

Dec 2, 2025

Office Address

OKLAHOMA CITY, OK, 73125