GovChime
Notice ID: 3497f0bb0b9f49e7b5f96ec9da41febfSolicitationArchived

6973GH-26-Q-00141 ATCBI-5 Encoder Mod Kits

Archived on September 26, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM CDT
Posted
August 26, 2026
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of TransportationFEDERAL AVIATION ADMINISTRATION

Notice details

Office
6973GH FRANCHISE ACQUISITION SVCS
Place of performance
Oklahoma City, Oklahoma, 73169
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
3497f0bb0b9f49e7b5f96ec9da41febf

Description

1. BACKGROUND

The Federal Aviation Administration (FAA) has identified a requirement to procure conversion kits to support modifications to the Air Traffic Control Beacon Interrogator (ATCBI-5) configuration at Airport Surveillance Radar Model 8 (ASR-8) facilities as part of the Brand-New Air Traffic Control System (BNATCS) implementation under the Radar System Replacement (RSR) Program.

The rotary joints currently installed at ASR-8/ATCBI-5 sites do not provide the number of signal paths required to support integration with the RSR architecture. To achieve compatibility, the existing rotary joints must be converted to the configuration utilized at ASR-8 sites equipped with the Mode Select Beacon System (Mode-S). This conversion requires the installation of a kit developed by AJW-1433, which adds an additional signal path to accommodate the encoders used in the ASR-8 rotary joint.

2. CONTRACTING OFFICER’S REPRESENTATIVE (COR):

The COR formally designated this responsibility by the Contracting Officer to provide direction and Government oversight to the contractor on matters related to this contract. The COR is:

Brandon Brumley

AJW-L910, Radar Technical and Program Support Branch

3. SCOPE OF WORK

The contractor must furnish all labor, facilities, equipment, and materials to fabricate a kit as outlined in each section that follows.

A.         CLIN 001 – One (1) First Article Unit

B.         CLIN 002 – Option to purchase up to thirty (30) Production Units after first article approval

4. REQUIREMENTS

4.1 Design, Construction, and Testing

The contractor shall procure and package the parts listed in Attachment 1 – Parts List into a Kit.

4.2 First Article Unit Delivery

Contractor must deliver one verification unit. Delivery shall occur no later than (NLT) ninety (90) days at receipt of order (ARO).

4.3 Verification Unit Analysis

Upon receipt of first article unit, FAA shall perform visual inspection to determine conformance to Attachment 1 – Parts List. FAA will have 30 days to accept or reject first articles.

4.4 Production Units

Once approval is provided for the first article unit, the contractor shall be considered an approved source of production units. The number of units for production is thirty (30). Delivery of production units shall occur NLT 180 days after notification of First Article Approval.

5. PREPARATION FOR DELIVERY

5.1 Preservation, Packaging, and Packing

Preservation, packaging, and packing shall be IAW Provision 61.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • Parts List - ATCBI-5 Encoder Mod Kit.xlsx

    10 KBAdded in Solicitation version 3Posted
    Download
  • SOW_BI5 Encoder_062026.pdf

    111 KBAdded in Solicitation version 3Posted
    Download
  • 6973GH-26-Q-00141.pdf

    354 KBAdded in Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3SolicitationArchivedCurrent

    6973GH-26-Q-00141 ATCBI-5 Encoder Mod Kits

    Notice 3497f0bb0b9f49e7b5f96ec9da41febf on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

6973GH-26-Q-00141_ATCBI-5_Encoder_Mod_Kits

Archive Date

Sep 26, 2026

Office Address

OKLAHOMA CITY, OK, 73125