Notice ID: 4804cdc2beea439b574afa8b652e787fSources Sought
Elevator Inspection Services in support of the Eastern Service Area (ESA)
Archived on August 30, 2019. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 AM UTC−05:00
- Posted
- August 16, 2019
- Notice type
- Sources Sought
- NAICS
- 541350: Building Inspection Services
- Agency
- Department of TransportationFEDERAL AVIATION ADMINISTRATION
Notice details
- Office
- 6913G4 NEW ENGLAND REGION
- PSC
- H: QUALITY CONTROL, TEST, INSPECTION
- Last updated
- Sep 10, 2025
Identifiers
- Solicitation number
- 697DCK-19-R-00421
- Notice ID
- 4804cdc2beea439b574afa8b652e787f
Description
The Contractor must perform semi-annual, annual, and five-(5-)year Elevator Inspection Services; certify to the proper operation and safety of the elevators as required by the FAA; and perform the other services described herein. Elevator Inspection Services must be provided for elevators in the Eastern Service Area (ESA), covering one hundred fourteen (114) elevators and fourteen (14) chairlifts as listed on the Appendix A, Elevator Listing. The FAA reserves the right to revise the list of elevators to be inspected by the Contractor. Attached to this announcement: 1)Solicitation Package: 697DCK-19-R-000421 2)Attachment 10-Pricing (Section J) 3) Reference Check Form (Attachment 11, Section J) 4)SOW (Statement of Work) 5) Wage Rates for each state In order to be responsive to this solicitation please read over Sections L and M of the Solicitation Package, all documentation will need to be provided by the closing date of Friday, August 30, 2019. Note: This website FAACO.GOV is the official record for FAA Contract Opportunities. Announcements are sent to FBO as a courtesy only. If you are viewing this announcement from a source other than FAA Contract Opportunities (FAACO), you may not receive accurate information regarding dates, attachments, or amendments. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/34453 to view the original announcement.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
697DCK-19-R-00421- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentAug 16, 2019
Elevator Inspection Services in support of the Eastern Service Area (ESA)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Request for Information (RFI) only. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | - | Market Research | 11/20/2026 |
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) (RFO) part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation No. 6913G626Q300057 is issued as a Request for Quotation (RFQ). This solicitation is being conducted under FAR RFO Part 12, Terms and Conditions – Commercial Products and Commercial Services. This solicitation document and Incorporated provisions are those in effect through Federal Acquisition Circular 2026-01, effective 03/13/2026. The NAICS Code is 541690; the Small Business size standard is $19M. This solicitation incorporates provisions and clauses; full text of provisions and clauses may be accessed electronically at http://www.acquisition.gov/far-overhaul. The U.S. Department of Transportation/John A. Volpe National Transportation Systems Center (Volpe Center) intends to solicit and award on a sole source basis to Sharma & Associates, Inc., in accordance with FAR 6.103 (a) and (b). The work described in the SOW will contine the Federal Railroad Administration's (FRA) effort and build on the prior reseach conducted on the retention capacity of rail equipment glazing systems by this contractor, in accordance with the attached Statement of Work and Terms and Conditions. REQUIREMENTS/SPECIFICATIONS The Government intends to award a firm fixed price purchase order for a base (CLINs 00100 to 00300) and two options (CLINs 00400 and 00500) as a result of this Combined Synopsis/Solicitation. The option CLINs may or may not be exercised. Please provide a firm fixed price quotation in accordance with the attached list of contract line items (CLINs) below and the attached SOW, six (6) items in total. An amount must be entered for each CLIN and a total for all CLINs. CLIN 00100 - Task 1: Finalize FRA report for publication, 1 EA $_______________, PSC: H222 (Base CLIN) CLIN 00200 - Task 2: Development of Simplified Finite Element Model, 1 EA $________________ PSC: H222 (Base CLIN) CLIN 00300 - Task 3: Industry Engagement and Updated Performance Requirements, 1 EA $______________, PSC: H222 (Base CLIN) CLIN 00400 - Task 4: Documentation of Results, 1 EA $_______________, PSC: H222 (Option CLIN) CLIN 00500 - Task 5: Documentation of Results including Development of Detailed Validated Finite Element Model, $________________, PSC: H222 (Option CLIN) TOTAL for all CLINs: $_______________________ INSTRUCTIONS TO OFFERORS: This combined synopsis/solicitation hereby incorporates all Federal Acquisition Regulation (FAR) provisions and clauses contained herein and attached. FAR 52.212-1 (SEP 2025), Instructions to Offerors-Commercial Items apply to this acquisition and is incorporated by reference. Vendors are required to meet all solicitation requirements. Failure to meet a requirement may result in a vendor submission being ineligible for award. If the vendor finds it necessary to take exception to any of the requirements specified in the solicitation, the vendor shall clearly identify where it is addressed in its proposal. Each exception shall clearly identify the specific paragraph and/or part of the solicitation to which the exception is taken. FAR 52.212-2 (DEVIATION SEP 2025), Evaluation—Commercial Products and Commercial Services is hereby incorporated by reference. a) Evaluation of Offerors. The Government will make an award to the Offeror, whose offer is deemed the best value to the Government. FAR Clause 52.212-4 (DEVIATION SEP 2025), Contract Terms and Conditions-Commercial Products and Commercial Services is hereby incorporated by reference. Additional clauses and provisions that apply to this acquisition are provided in the attached terms and conditions. Contractors must maintain their SAM registration throughout the life of the contract through final payment. Contracting officers must validate the contractor has an active Federal Government contracts registration in SAM. QUESTIONS All questions regarding this solicitation must be submitted in writing via email to the Contracting Officer in the RFQ no later than 09/24/2026, at 12:00 PM Eastern Time. The offer should be addressed to the following: U.S. Department of Transportation, Volpe National Transportation Systems Center, Attn: Karen Marino, V222, 220 Binney Street, Cambridge, MA 02142. The signed offer must be submitted via e-mail to the contracting officer Karen.Marino@dot.gov. The time for receipt of offers is 3:00 PM Eastern Time on 09/28/2026. No telephone requests will be honored. The Government will not pay for any information received. | - | Combined Synopsis | 09/28/2026 |
DESCRIPTION The Air Force Life Cycle Management Center (AFLCMC) is conducting market research to support the DAF-MAMBA AoA. Legacy electromagnetic spectrum (EMS) methods are inadequate, risking operations in the Electromagnetic Operational Environment (EMOE). REQUIREMENT OVERVIEW The DAF seeks information on improved technologies, tools, and methodologies for effective battle management of systems operating in the EMS to establish and maintain freedom of action. DAF-MAMBA, as a component of the Advanced Battle Management System (ABMS), will provide the warfighter with Situational Awareness (SA), Decision Support (DS), and Command and Control (C2) capabilities across operational and tactical levels. ATTACHMENT Interested vendors must be able to handle CUI documents and request access to the CUI document attached to this post. SIPRnet access is required for additional information related to this RFI. SUBMISSION INSTRUCTIONS This RFI is for information and planning purposes only to compile market reasearch. The Government does not intend to award a contract based on this requested or to otherwise pay for the information provided. Responses will be treated as information only and will not be evaluated as a proposal. The submission deadline is 11 November 2026 at 5pm Eastern Time. POINTS OF CONTACT Contracting Officer: Melissa Droeske melissa.droeske@us.af.mil and Contract Specialist: Mackenzi Soul mackenzi.soul@us.af.mil | - | Market Research | 11/11/2026 |
Contracts for a new HTRW MATOC pool are anticipated to be awarded to a minimum of three small contracts and up to three unrestricted contracts with a total value of up to $49,000,000.00. The location of the work to be performed under this contract shall be primarily in the six New England states but will also include other states and districts within the North Atlantic Division mission area. The work may involve performing Site Inspections, Remedial Investigations, Feasibility Studies, Proposed Plans, Records of Decision, Engineering Evaluation and Cost Analysis, Remedial Designs, Removal Designs, Removal Actions, Interim Removal Actions, and/or Remedial Actions at HTRW sites that are being addressed through the U.S Environmental Protection Agency (USEPAs) Superfund Program, the Department of Defense (DoDs) Base Realignment and Closure Program (BRAC) and Defense Environmental Restoration Program (DERP) Formerly Used Defense Sites (FUDS) Program, and other Interagency Support Customers. HTRW work performed for USACE must generally comply with the DERP statute [10 United States Code (USC) 2700 et seq.], the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) 42 USC 9601 et seq., Executive Orders (EOs) 12580 and 13016, the National Oil and Hazardous Substances Pollution Contingency Plan (NCP), and all applicable DoD and Army policies. | - | Solicitation | 01/29/2027 |
Engineering Services and Supplies to be supplied for the Engineering and Sustainment/Readiness Support of the AN/SPY Radar System, AEGIS MK99 Fire Control System, Radar Transmitter Groups, AN/SPS-49 radars and ancillary equipment including AEGIS Microwave Tubes. | - | Sole Source / J&A | Open |
Additional Details
Solicitation Number
697DCK-19-R-00421
Archive Date
Aug 30, 2019
Office Address
BURLINGTON, MA, 01803