Notice ID: 1184a16dc741441199809aa6621adc44Combined Synopsis/SolicitationArchived
WY FLAP SHE 26(2) Red Grade Road - Geotechnical Drilling
Archived on September 20, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM MDT
- Posted
- August 6, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 541380: Testing Laboratories and Services
- Agency
- Department of TransportationFEDERAL HIGHWAY ADMINISTRATION
Notice details
- Office
- 6982AF CENTRAL FEDERAL LANDS DIVISI
- Place of performance
- Sheridan, 82801
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 6982AF25Q000017
- Notice ID
- 1184a16dc741441199809aa6621adc44
Description
The project consists of geotechnical drilling for 7.6 miles of the gravel Red Grade Road between Mileposts 3.3 and 10.9 in Sheridan County, Wyoming (see attached County map). Milepost 0 is at the intersection of Red Grade Road with Wyoming State Highway 335 and Lower Hideaway Lane (6 miles southwest of the town of Big Horn, WY). The drilling to consist of sixteen shallow borings up to 5-foot depth (or until refusal) plus one deep boring up to 30-foot depth (or until refusal). The drilling to consist of hollow stem auger (HSA) drilling using a truck mounted drill rig able to advance to 30-foot depth. The soils beneath the road are believed to consist of silty, clayey sand with gravel and cobbles. Borings may encounter boulders and bedrock. A two-man drill crew is anticipated. Shallow borings are intended to penetrate through the existing structural section and into the underlying material for the purpose of gathering bulk subgrade samples (in 5 gallon buckets with 50-70 pounds of material each). It is estimated that these borings will be on 0.50 mile increments or as marked. The deep boring is intended to collect split barrel samples (in 1 gallon ziplock bags) and to measure the SPT resistance of the soil at increments of 5 depth. Drill cuttings can be dispersed at the site. Borings to be backfilled with excess cuttings for depths less than 5 feet and imported pea gravel or bentonite chips for depths greater than 5 feet and compacted. The boring to be topped with at least 6 inches of compacted crushed aggregate road base. FHWA personnel to log the samples and transport the sample buckets to a shipping location. FHWA to provide the 5-gallon buckets with lids and 1-gallon ziplock bags.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Eric Grosskreuz
Secondary Contact
Kelly Palmer
Documents
Files (1)
- Download
WY FLAP SHE 26(2) Red Grade Road Geotechnical Drilling.pdf
6.2 MBAdded in Combined Synopsis/Solicitation version 3Posted
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
WY FLAP SHE 26(2) Red Grade Road - Geotechnical Drilling
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a "REQUEST FOR INFORMATION" only for the proposed work listed in the requirements section below. This Sources Sought Notice is not a request for formal proposals or quotes. Responses to this Sources Sought must be received by email no later than the date specified in the response section. The intent of this sources sought is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified Service-Disabled Veteran Owned, 8(a), HUBZone, or other Small Businesses interested and capable of performing the proposed work. Documentation of technical expertise must be presented in sufficient detail for the Government to determine whether your company has the capability and experience to compete for this acquisition. Responses to this notice shall include the following: Company Name Point of Contact (POC) Name POC phone and email UEI number Business Size based on NAICS 541380 with an industry size standard of $19.0 million Socio-economic category, if applicable (e.g., Service-Disabled Veteran Owned Small Business, 8(a), HUBZone, Women Owned Small Business, Small Disadvantaged Business, etc.) Estimation of your subcontracting requirement Intent to submit a quote if an RFQ is published Listing of your relevant past experience for projects that are similar in size and scope to the described requirement and that have occurred in the past 5 years. Include contract numbers, contact name and title, locations, dollar amounts, and work descriptions The proposed action is for a hybrid firm-fixed-priced/time & materials performance-based services purchase order. Refer to the draft Performance Work Statement and Master Requirements List for further details. Responses to this Sources Sought Notice may be accomplished using the MS Forms attachment or via e-mail to WFL.Services@dot.gov which shall include all information requested in (1) through (9) above. Determination by the Government to not compete with this proposed contract action based on responses to this notice is solely within the discretion of the Government. The Government is not obligated to, nor will it, pay for or reimburse any costs associated with responding to this sources sought synopsis request. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. Responses are due no later than December 2, 2026, at 2:00pm PST. | - | Market Research | 12/02/2026 |
The National Highway Traffic Safety Administration (NHTSA) is issuing this Sources Sought Notice to identify potential qualified Small Business (SB), Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, SDVOSB, or WOSB concerns that may be interested in and capable of performing the work described herein which is to provide Full Scale Vehicle Crashworthiness Testing and Side Air Bag Out-of-Position Testing for the New Car Assessment Program (NCAP). NHTSA welcomes all qualified Small Business concerns, with the appropriate NAICS Code and past experience to submit their Corporate Capability Statements that demonstrate their ability to successfully accomplish the goals of the project as listed below. NHTSA does not intend to award a contract on the basis of responses to this notice or otherwise pay for the preparation of any information submitted. Acknowledgement of receipt of responses will not be made; no formal evaluation of the information received will be conducted by NHTSA. NHTSA may; however later on issue a Request for Proposals (RFP). However, should such a requirement fail to materialize, no basis for claims against NHTSA shall arise as a result of a response to this notice. Background: The National Highway Traffic Safety Administration (NHTSA) is an agency of the U.S. Department of Transportation (DOT). NHTSA’s mission is to save lives, prevent injuries, and reduce traffic-related health care and other economic costs. The agency develops, promotes, and implements effective educational, engineering, and enforcement programs with the goal of ending vehicle crash tragedies and reducing economic costs associated with vehicle use and highway travel. As part of this work, NHTSA conducts a variety of motor vehicle crash tests including, but not limited to, frontal, rear, oblique, side moving deformable barrier (MDB), and side pole impact test modes. NHTSA also conducts various crash avoidance tests, static and dynamic rollover tests, air bag out-of-position low risk deployment tests, tire testing, and testing in accordance with Federal Motor Vehicle Safety Standards (FMVSS). To support future efforts, NHTSA expects to conduct research for future FMVSS, crash avoidance technologies, automated vehicles, and electric vehicles. The agency may also conduct testing to assess new crash test dummies and child restraint systems and may perform research study vehicle safety defects. The New Car Assessment Program (NCAP) is a consumer information program conducted by NHTSA. Its major goals are to: (1) provide consumers with relative safety ratings information to assist them in their vehicle purchasing decisions and (2) use market forces to motivate automobile manufacturers to design vehicles to a higher level of occupant protection. To accomplish these goals, NHTSA utilizes testing contracts to conduct NCAP testing and release test results to the public as quickly as possible so that consumers can use this information when selecting a new vehicle to purchase. The contractor shall support NHTSA’s testing/research efforts by providing inspection, testing, and reporting services for NCAP. Federal law requires new passenger vehicles to be labeled with NCAP safety ratings information published by NHTSA. The Contractor shall be responsible to include all the necessary equipment, personnel, facilities, and management of personnel and workflow as identified in the attached Draft Statement of Work (SOW). Any interested qualified Small Business firms, Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, SDVOSB, or WOSB concerns should submit their Corporate Capability Statement, which demonstrates the firm’s ability and past experience in no more than 10 pages to perform the key requirements described above to the identified NHTSA point of contact listed herein. Any proprietary information should be marked as such. All respondents are asked to certify the type and size of their business organization is in-line with the requirements of this Sources Sought Notice which must be received no later than 10 calendar days from the date of publication or by the closing date of this notice. To facilitate a timely and comprehensive review of all submitted responses, firms should respond using the format requested in this Notice. Please provide the following information for your firm and for any teaming or joint venture partners: General Information Company name, address, point of contact name, telephone, and email address. Data Universal Numbering System (DUNS) Number and Commercial and Government Entity (CAGE) Code. Business size and classification (e.g., large, small, small-disadvantaged, SBA Certified 8(a), HUBZone, service-disabled veteran-owned, woman-owned) based on NAICS code: 541380, Testing Laboratories. If applicable, potential proposed teaming arrangements to include business size and classification of prime and subcontractors. GSA Federal Supply Schedule (FSS) Number (FSS must include NAICS code 541380, Testing Laboratories Identify contracts your company has been awarded under NAICS code: 541380, Testing Laboratories Technical Capability: Provide a brief synopsis to support the firm’s ability to perform all of potential areas of the objective/scope. Identify each task element and provide information to support the firm’s experience, staffing and overall ability to perform the technical area. Evidence of experience and past performance should include contracts/task orders from the past three (3) years similar in scope to this requirement. Examples must include contract numbers, project titles, dollar amounts, periods of performance, and Government points of contact (telephone numbers or email addresses). Documented information to support the firm’s ability to provide the range of research skillsets capability to quickly plan, conduct, and document studies; AND personnel required for this effort in a timely fashion. Any data on previous contracts/task orders on personnel retention and succession planning. Additional Information: Indicate if your firm will submit a proposal if a Request for Proposal (RFP) is issued, and if your firms interest is for Prime contracting, teaming agreement or Joint Venture. Validation of, or recommended NAICS codes for this effort. Validation of, or recommended contract type. Validation of, or recommended GSA vehicle In each potential areas of research, indicate any Small Business Subcontracting opportunities, as applicable. Other Recommendations Any information missing from this requirement that would provide a better understanding of the effort desired. Please submit any other questions or comments along with your response. CONTRACTING OFFICE ADDRESS Department of Transportation (DOT) Headquarters, 1200 New Jersey Avenue, SE, Washington, DC 20590. | - | Market Research | 11/02/2026 |
Request for Information (RFI) only. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | - | Market Research | 11/20/2026 |
The National Highway Traffic Safety Administration (NHTSA) is an agency of the U.S. Department of Transportation (DOT). NHTSA’s mission is to save lives, prevent injuries, and reduce traffic-related health care and economic costs. The agency develops, promotes, and implements effective educational, engineering, and enforcement programs to reduce vehicle crash-related fatalities and injuries. The Electronic Systems Safety Division conducts research, testing, and analysis to evaluate how vehicle electronic subsystems impact vehicle safety and to identify countermeasures to mitigate safety risks. NHTSA’s research portfolio includes work related to Advanced Driver Assistance Systems (ADAS), Automated Driving Systems (ADS), and vehicle cybersecurity. These efforts aim to advance the safe development, testing, and deployment of vehicle safety technologies while addressing emerging risks such as driver distraction, system reliability, and cybersecurity vulnerabilities. This research complements efforts undertaken by industry, academia, and other government agencies and is intended to advance the state of knowledge and support data-driven safety decision-making. NHTSA with the capability to issue task orders requiring a wide range of research and technical support services related to vehicle safety technologies. Work under this contract may include: Planning, conducting, and documenting vehicle safety research studies •Testing and evaluation of ADAS and ADS technologies •Simulation and modeling of vehicle systems and driver behavior •Vehicle component testing and functional safety assessments •On-road testing and naturalistic driving studies •Safety impact assessments and data analysis •Cybersecurity research and evaluation •Application of artificial intelligence (AI) and machine learning (ML) to vehicle safety | - | Pre-Solicitation | 12/30/2026 |
Cross Connection Hazard Assessment for DLA Distribution San Joaquin, CA | - | Combined Synopsis | 11/23/2026 |
Additional Details
Solicitation Number
6982AF25Q000017
Archive Date
Sep 20, 2025