GovChime
Notice ID: abb76ca6652343e1a1a386229a4809d6Combined Synopsis/Solicitation

ANP Technologies NIDS Assays and Sampling Kits

Archived on June 23, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
May 22, 2020
Notice type
Combined Synopsis/Solicitation
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of Homeland SecurityFEDERAL EMERGENCY MANAGEMENT AGENCY

Notice details

Office
PREPAREDNESS SECTION(PRE20)
Place of performance
Anniston, AL, 36205
Last updated
Dec 4, 2025

Identifiers

Solicitation number
70FA2020Q00000026
Notice ID
abb76ca6652343e1a1a386229a4809d6

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation is Combined Synopsis/Solicitation number 70FA2020Q00000026. Provisions and clauses in effect through Federal Acquisition Circular 2020-06 are incorporated. It is the contractors responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/ or http://farsite.hill.af.mil/. The NAICS code is 334516- Analytical laboratory equipment manufacturing, with a small business size of 1000 employees. This acquisition is full and open. During market research, two or more small businesses were not identified. Submit email quotes (using PDF, MS Word or Excel attachments) to Laura Harshbarger at laura.harshbarger@fema.dhs.gov. Quotes are due no later than 12:00 PM EST, 08 June 2020. The Federal Emergency Management Agency requests quotes from qualified sources capable of providing ANP Technologies 8 each 5L-001-20PK NIDS Multiplexed Handheld Immunochromatographic Assays and 60 each SK-001 NIDS Sampling Kit for Surfaces and Powders (brand name only) as detailed below. A brand name only acquisition is supported by the rationale contained in the attached Sole Source Justification, brand name only. The successful bidder must be authorized by the manufacturer to distribute the items specified herein. All terms, conditions, requirements, clauses and provision herein shall apply to this combined synopsis/solicitation. All offerors shall submit a quote for all the following. PRICE/COST SCHEDULE: ITEM DESCRIPTION OF QTY UNIT UNIT AMOUNT NO. SUPPLIES/SVCS PRICE 0001 8.00 EACH ____________ _______________ NIDS 5-Plex 1 Assay, PN 5L-001-20PK 0002 60.00 EACH ____________ _______________ NIDS Sampling Kit, SK-001 Price must include shipping and handling, FOB destination. If shipping cost is additional, please be sure to include any applicable shipping cost to the quote as delivered to Anniston, AL. DELIVERY SCHEDULE: ITEM NUMBER QUANTITY DELIVERY 0001 8.00 90 Days ARO 0002 60.00 90 Days ARO PLACE OF DELIVERY: DHS/FEMA Center for Domestic Preparedness (CDP) 40 Twill Lane Anniston, AL 36205 ATTN: Monica Sheffield All applicable manufacturer commercial warranties shall be valid for all products. TYPE OF CONTRACT: The Government contemplates award of a Firm Fixed Price contract resulting from this combined synopsis/solicitation. PROVISIONS AND CLAUSES: FAR 52.212-1, Instructions to Offerors---Commercial Items, apply to this acquisition with the exception of (d), (h), and (i) of the clause, which are RESERVED; FAR 52.212-2 Evaluation Commercial Items. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: See EVALUATION FACTORS FOR AWARD below. FEMA intends to award one Firm Fixed Price Purchase Order based on Low Priced Technically Acceptable (LPTA). Evaluation of price will be based on the offeror's aggregate price for all supplies or services as required above. Factor 1 - Technically Acceptable means offeror provides all the equipment and materials as specified herein. All items shall be quoted; incomplete quotes may not be considered. This is an "All or Nothing" acquisition. This is a Brand Name Only requirement. All items shall be from ANP Technologies. No other brand is acceptable. Offeror shall include their estimated delivery time after receipt of award (ARO). Factor 2 - Price, inclusive of any shipping costs for delivery to Anniston, AL (36205), shall be evaluated. Award will be made on the basis of the lowest evaluated price of the quote meeting or exceeding the Factor 1. Past performance is not an evaluation factor for this acquisition. The offerors initial quote shall contain the offerors best terms from a total price (including any applicable shipping costs) and technical standpoint. The Government intends to evaluate quotes and award a purchase order without discussions, but reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government reserves the right to make no award as a result of this solicitation. FAR 52.212-3, Offeror Representations and Certifications-Commercial Items; FAR 52.212-4, Contract Terms and Conditions---Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. In compliance with said clause, the following FAR clauses apply: 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Handicapped Workers with disabilities; 52.222-50, Combating Trafficking in Persons; 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving; 52.224-3, Privacy Training; 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management. FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran Representation and Certifications; HSAR 3052.212-70, Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items. In compliance with said clause, the following FAR clauses apply: 3052.247-72, F.o.B. Destination Only. FAR 52.252-2, Clauses Incorporated By Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.acquisition.gov/far/index.html http://farsite.hill.af.mil/ NOTICE OF FILING REQUIREMENTS FOR AGENCY PROTESTS A. Preface Prior to submission of an agency protest, all parties must use their best efforts to resolve concerns raised by an interested party. FEMA offers, as an option for dispute resolution, Alternative Dispute Resolution (ADR). ADR in an informal, expeditious and inexpensive way to resolve contract issues and is designed to promote satisfying solutions and fair procedures. For more information on FEMA's ADR services, please contact FEMA's ADR office at the following address: Federal Emergency Management Agency Alternative Dispute Resolution Division FEMA Office of Chief Counsel 400 Virginia Avenue, SW Washington, DC 20472-3400 If concerns cannot be resolved, protesters may use these procedures when a resolution is requested from the agency. These procedures have been designed to create an avenue for resolving third party grievances in connection with the acquisition process outside of formal processes through the Government Accountability Office (GAO) and the United States Court of Federal Claims (CFC). Filing an agency protest is not a prerequisite to filing at the GAO or CFC. If the protester files a protest through the GAO or CFC while their protest is pending at the agency level, FEMA may dismiss the agency protest. Pursuing an agency protest does not extend the time for obtaining a stay at GAO. These procedures are in addition to the existing protest procedures contained in FAR Subpart 33.103. B. Definitions. (1) "Agency protest," as used in this Synopsis/Solicitation, is one that may be filed with either the Contracting Officer or the officer responsible for the resolution of all agency protests filed at the level above the Contracting Officer. (2) "Ombudsman," as used in this Synopsis/Solicitation, is the agency official above the level of the Contracting Officer designated by the Director of the Acquisition Management Division to handle and issue the formal agency decision resolving the protest. Protesters using these procedures may protest directly to the Ombudsman. (3) "Day," as used in this Synopsis/Solicitation, is a calendar day. In computing a period of time for the purpose of these procedures, the day from which the period begins to run is not counted. When the last day of the period is a Saturday, Sunday or a Federal holiday, the period extends to the next day that is not a Saturday, Sunday or a Federal holiday. Similarly, when the Washington, DC offices of FEMA are closed for all or part of the last day, the period extends to the next day on which the Agency is open. C. Submission Guidelines. (1) Agency protests may be filed through the Contracting Officer or, at the level above the Contracting Officer, through the Ombudsman either by FAX transmission or by "Certified Mail" (Return Receipt Requested) as follows: a. Protests filed through the Contracting Officer or the Ombudsman must be mailed or faxed to: James Suerdieck, Department of Homeland Security/FEMA Acquisition Preparedness Branch Building D 16825 South Seton Avenue Emmitsburg, MD 21727 FAX: 301-447-1092 -OR- DHS/FEMA David Orris, Ombudsman 16825 S. Seton Ave, D-123 Emmitsburg, MD 21727 FAX: 301-447-1092 b. The outside of the envelope or beginning of the FAX transmission must be marked "Agency Protest". c. If the protester submits the protest directly through the Ombudsman, the protester must also, within one (1) day of submitting the protest to the Ombudsman, submit a copy of the protest to the responsible Contracting Officer either by FAX transmission or by "Certified Mail" (Return Receipt Requested). (2) To be filed on a given day, protests and any subsequent appeals must be received by 4:30 PM, current-local time. Any protests received after that time will be considered to be filed on the next day. (3) Protest submissions will not be considered filed until all of the following information is provided: a. the protester's name, address, telephone number and fax number; b. the solicitation or contract number; c. a detailed statement of all factual and legal grounds for protests, to include an explanation of how the protester was prejudiced; d. copies of relevant documents; e. a request for ruling by the agency; f. a statement detailing the form of relief requested; g. all information establishing that the protester is an interested party for the purposes of filing a protest; and h. all information establishing the timeliness of the protest. (4) All protests must be signed by an authorized representative of the protester, and must be addressed to the Contracting Officer or the Ombudsman. D. Timeliness/Resolution of Protests. (1) Protests based upon alleged improprieties in a solicitation which are apparent prior to bid opening or the time set for receipt of initial proposals shall be filed prior to bid opening or the time set for receipt of initial proposals. In procurements where proposals are requested, alleged improprieties which do not exist in the initial solicitation but which are subsequently incorporated into the solicitation must be protested not later than the next closing time for receipt of proposals following the incorporation. (2) Protests other than those covered by paragraph (1) of this section shall be filed not later than 10 days after the basis of protest is known or should have been known (whichever is earlier), with the exception of protests challenging a procurement conducted on the basis of competitive proposals under which a debriefing is requested and, when requested, is required. In such cases, with respect to any protest basis which is known or should have been known either before or as a result of the debriefing, the initial protest shall not be filed before the debriefing date offered to the protester, but shall be filed not later than 10 days after the date on which the debriefing is held. (3) Protests filed through the Contracting Officer. a. Within twenty (20) days after the protest is filed through the Contracting Officer, the Contracting Officer will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Return Receipt Requested)". b. Appeals i. Protesters who filed protests through the Contracting Officer may, within five (5) days of receipt of the Contracting Officer's written ruling, appeal to the Ombudsman. ii. Requests for Appellate Review must be submitted to the Ombudsman by FAX transmission or by "Certified Mail" (Return Receipt Requested). iii. The Ombudsman will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Mail Receipt Requested)" within ten (10) days of receipt of the request for appellate review of the Contracting Officer's decision. iv. In accordance with FAR 33.103(d)(4) and 4 C.F.R 21.2(a)(3), if there is an agency appellate review of the Contracting Officer's decision on the protest, it will not extend GAO'S timeliness requirements. Therefore, any subsequent protest to the GAO must be filed within ten (10) days of knowledge of initial adverse agency action. (4) Protests filed through the Ombudsman: a. If the protester protests directly through the Ombudsman, the Ombudsman will send a written ruling and a summary of the reasons supporting the ruling to the protester by "Certified Mail (Mail Receipt Requested)" within thirty-five (35) days after the protest was filed. b. Protests filed directly through the Ombudsman cannot be appealed within the agency. E. Dismissal of Protests. The agency may dismiss protests when protesters file protests through the GAO or CFC while their protests are pending at the agency level; and for failure to comply with any of the requirements of these agency protest procedures. For example, the agency may dismiss protests that are procedurally or substantively defective (e.g., the protest is untimely or the protest fails to clearly state legally sufficient grounds of protest). CONFIDENTIALITY OF INFORMATION (a) To the extent that the work under this contract requires that the Contractor be given access to sensitive or proprietary business, technical, or financial information belonging to the Government or other companies, the Contractor shall, after receipt thereof, treat such information as confidential and not appropriate such information to its own use or disclose such information to third parties unless specifically authorized by the Contracting Officer in writing. The foregoing obligations, however, shall not apply to information that-- (1) At the time of receipt by the Contractor, is in the public domain (2) Is published by others after receipt thereof by the Contractor or otherwise becomes part of the public domain through no fault of the Contractor (3) The Contractor can demonstrate was already in its possession at the time of receipt thereof and was not acquired directly or indirectly from the Government or other companies (4) The Contractor can demonstrate was received by it from a third party that did not require the Contractor to hold it in confidence. (b) The Contractor shall obtain from each employee permitted access a written agreement, in a form satisfactory to the Contracting Officer, that he/she will not discuss, divulge or disclose any such information or data to any person or entity except those persons within the Contractor's organization or the Government directly concerned with the performance of the contract. NARA RECORDS MANAGEMENT LANGUAGE FOR CONTRACTS The following standard items relate to records generated in executing the contract and should be included in a typical Electronic Information Systems (EIS) procurement contract: 1. Citations to pertinent laws, codes and regulations such as 44 U.S.C chapters 21, 29, 31 and 33; Freedom of Information Act (5 U.S.C. 552); Privacy Act (5 U.S.C. 552a); 36 CFR Part 1222 and Part 1228. 2. Contractor shall treat all deliverables under the contract as the property of the U.S. Government for which the Government Agency shall have unlimited rights to use, dispose of, or disclose such data contained therein as it determines to be in the public interest. 3. Contractor shall not create or maintain any records that are not specifically tied to or authorized by the contract using Government IT equipment and/or Government records. 4. Contractor shall not retain, use, sell, or disseminate copies of any deliverable that contains information covered by the Privacy Act of 1974 or that which is generally protected by the Freedom of Information Act. 5. Contractor shall not create or maintain any records containing any Government Agency records that are not specifically tied to or authorized by the contract. 6. The Government Agency owns the rights to all data/records produced as part of this contract. 7. The Government Agency owns the rights to all electronic information (electronic data, electronic information systems, electronic databases, etc.) and all supporting documentation created as part of this contract. Contractor must deliver sufficient technical documentation with all data deliverables to permit the agency to use the data. 8. Contractor agrees to comply with Federal and Agency records management policies, including those policies associated with the safeguarding of records covered by the Privacy Act of 1974. These policies include the preservation of all records created or received regardless of format (paper, electronic, etc.) or mode of transmission (e-mail, fax, etc.) or state of completion (draft, final, etc.). 9. No disposition of documents will be allowed without the prior written consent of the Contracting Officer. The Agency and its contractors are responsible for preventing the alienation or unauthorized destruction of records, including all forms of mutilation. Willful and unlawful destruction, damage or alienation of Federal records is subject to the fines and penalties imposed by 18 U.S.C. 2701. Records may not be removed from the legal custody of the Agency or destroyed without regard to the provisions of the agency records schedules. 10. Contractor is required to obtain the Contracting Officer's approval prior to engaging in any contractual relationship (sub-contractor) in support of this contract requiring the disclosure of information, documentary material and/or records generated under, or relating to, this contract. The Contractor (and any sub-contractor) is required to abide by Government and Agency guidance for protecting sensitive and proprietary information. Offerors are reminded to include a completed copy of 52.212-3 with RFP response, or provide an affirmative response that the offeror is registered in ORCA and all information in ORCA is current and complete. All clauses shall be incorporated by reference or full text in the purchase order. Additional contract terms and conditions applicable to this procurement are: IDENTIFICATION OF GOVERNMENT OFFICIALS: The Government Officials assigned to this contract are as follows: Administrative Contracting Officer: Name: James Suerdieck Phone: 301-447-7244 Email: james.suerdieck@fema.dhs.gov Administrative Contract Specialist: Name: Laura Harshbarger Phone: 301-447-7611 Email: laura.harshbarger@fema.dhs.gov Technical Point of Contact hereby delegated authority to accept goods and services and review and approve invoices for this contract: Name: TBD Phone: TBD Email: TBD BILLING INSTRUCTIONS (JUN 2014) Contractors will use Standard Form 1034 (Public Voucher for Purchases and Services Other Than Personal) located at http://www.gsa.gov/portal/forms/type/SF when submitting a payment request. A payment request means any invoice or request for contract financing payment requesting reimbursement for supplies or services rendered. The Contractor shall not be paid more frequently than on a twice monthly basis. Contractors must submit vouchers electronically in pdf format to the FEMA Finance Center at: FEMA-Finance-Vendor-Payments@fema.dhs.gov. A copy of the voucher must be submitted electronically to the contracting officer identified within this contract. The submission of vouchers electronically will reduce correspondence and other causes for delay to a minimum and will facilitate prompt payment to the Contractor. Paper vouchers mailed to the finance center will not be processed for payment. If the Contractor is unable to submit a payment request in electronic form, the contractor shall submit the payment request using a method mutually agreed to by the Contractor, the Contracting Officer, and the payment office. DEFECTIVE OR IMPROPER INVOICES (JUN 2014) Name, title, phone number, and email of officials of the business concern who are to be notified when the Government receives an improper invoice. _____To be provided by contractor ______________ ___________________________________________ ___________________________________________ INVOICE APPROVAL (JUN 2014) The following FEMA individual (in addition to the Contracting Officer) is hereby delegated authority to accept goods and services and to review and approve invoices for this contract: Authorized Invoice Approver Name: TBD Title: TBD Phone: TBD Email: TBD INVOICE INSTRUCTIONS (JUN 2014) Invoices shall be submitted as follows: Contractors will use Standard Form 1034 (Public Voucher for Purchases and Services Other Than Personal) and SF 1035 Continuation sheet when requesting payment for supplies or services rendered. The voucher must provide a description of the supplies or services, by line item (if applicable), quantity, unit price, and total amount. The item description, unit of measure, and unit price must match those specified in the contract. Invoices that do not match the line item pricing in the contract will be considered improper and will be returned to the Contractor. SF 1034 and 1035 instructions: SF 1034--Fixed Price The information which a contractor is required to submit in its Standard Form 1034 is set forth as follows: (1) U.S. Department, Bureau, or establishment and location insert the names and address of the servicing finance office unless the contract specifically provides otherwise. (2) Date Voucher Prepared - insert date on which the public voucher is prepared and submitted. (3) Contract/Delivery Order Number and Date - insert the number and date of the contract and delivery order, if applicable, under which reimbursement is claimed. (4) Requisition Number and Date - leave blank. (5) Voucher Number - insert the appropriate serial number of the voucher. A separate series of consecutive numbers, beginning with Number 1, shall be used by the contractor for each new contract. When an original voucher was submitted, but not paid in full because of suspended costs, resubmission vouchers should be submitted in a separate invoice showing the original voucher number and designated with the letter "R" as the last character of the number. If there is more than one resubmission, use the appropriate suffix (R2, R3, etc.) The last voucher of every contract or task order should be marked with the next sequential number, with the words "FINAL" (e.g. Invoice No. 1234-FINAL). (6) Schedule Number; Paid By; Date Invoice Received - leave blank. (7) Discount Terms - enter terms of discount, if applicable. (8) Payee's Account Number - this space may be used by the contractor to record the account or job number(s) assigned to the contract or may be left blank. (9) Payee's Name and Address - show the name of the contractor exactly as it appears in the contract and its correct address, except when an assignment has been made by the contractor, or the right to receive payment has been restricted, as in the case of an advance account. When the right to receive payment is restricted, the type of information to be shown in this space shall be furnished by the Contracting Officer. (10) Shipped From; To; Weight Government B/L Number - insert for supply contracts. (11) Date of Delivery or Service - show the month, day and year, beginning and ending dates of supplies or services delivered. (12) Articles and Services - insert the following: "For detail, see Standard Form 1035 total amount claimed transferred from Page ___ of Standard Form 1035." Type the following certification, signed by an authorized official, on the face of the Standard Form 1034. "I certify that all payments requested are for appropriate purposes and in accordance with the agreements set forth in the contract." _______________________ _________ (Name of Official) (Title) (13) Quantity; Unit Price - insert for supply contracts. (14) Amount - insert the amount claimed for the period indicated in (11) above. This amount should be transferred from the total per the SF 1035 Continuation Sheet. INVOICE PREPARATION INSTRUCTIONS SF 1035 The SF 1035 will be used to identify the specific item description, quantities, unit of measure, and prices for each category of deliverable item or service. Suitable self-designed forms may be submitted instead of the SF 1035 as long as they contain the information required. The information which a contractor is required to submit in its Standard Form 1035 is set forth as follows: U.S. Department, Bureau, or Establishment - insert the name and address of the servicing finance office. Voucher Number - insert the voucher number as shown on the Standard Form 1034. Schedule Number - leave blank. Sheet Number - insert the sheet number if more than one sheet is used in numerical sequence. Use as many sheets as necessary to show the information required. Number and Date of Order - insert payee's name and address as in the Standard Form 1034. Articles or Services - insert the contract number as in the Standard Form 1034. Amount - insert the total quantities contract value, and amount and type of fee payable (as applicable). A summary of claimed current and cumulative goods and services delivered and accepted to date. - Invoices shall include an itemization of all goods and services delivered and accepted for the period by item and by CLIN. Each invoice shall include sufficient detail to identify goods and services as compared to and in accordance with contract terms and conditions. Invoices that do not match the line item pricing in the contract will be considered improper and returned to the contractor. In addition, each invoice shall detail the total charges by showing current and cumulative goods and services both currently invoiced and cumulative to date. ATTACHMENTS: (N/A) PROPOSAL PREPARATION INSTRUCTIONS: A. GENERAL INSTRUCTIONS EVALUATION FACTORS FOR AWARD: FEMA intends to award one Firm Fixed Price Purchase Order based on Low Priced Technically Acceptable (LPTA). Evaluation of price will be based on the offeror's aggregate price for all supplies or services as required above. Factor 1 - Technically Acceptable means offeror provides all the equipment and materials as specified herein. All items shall be quoted; incomplete quotes may not be considered. This is an "All or Nothing" acquisition. This is a Brand Name Only requirement. All items shall be from ANP Technologies. No other brand is acceptable. Offeror shall include their estimated delivery time after receipt of award (ARO). Factor 2 - Price, inclusive of any shipping costs for delivery to Anniston, AL (36205), shall be evaluated. Award will be made on the basis of the lowest evaluated price of the quote meeting or exceeding the Factor 1. Past performance is not an evaluation factor for this acquisition. The offerors initial quote shall contain the offerors best terms from a total price (including any applicable shipping costs) and technical standpoint. The Government intends to evaluate quotes and award a purchase order without discussions, but reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government reserves the right to make no award as a result of this solicitation. OFFEROR QUESTIONS: If you have any questions, please contact Laura Harshbarger by email to: laura.harshbarger@fema.dhs.gov. Questions shall be submitted no later than May 26, 2020. No phone calls accepted. Questions submitted after this deadline may not receive a response. PROPOSAL SUBMISSION INSTRUCTIONS: Your Original Proposal (Volumes 1 and 2) including all supporting documentation shall be submitted electronically by email (using PDF, MS Word, and/or MS Excel) to Laura Harshbarger laura.harshbarger@fema.dhs.gov, and Gary Topper, not later than 12:00 p.m. (Eastern Time) on June 8, 2020. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation is Combined Synopsis/Solicitation number 70FA2020Q00000026. Provisions and clauses in effect through Federal Acquisition Circular 2020-06 are incorporated. It is the contractors responsibility to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/ or http://farsite.hill.af.mil/. The NAICS code is 334516- Analytical laboratory equipment manufacturing, with a small business size of 1000 employees. This acquisition is full and open. During market research, two or more small businesses were not identified. Submit email quotes (using PDF, MS Word or Excel attachments) to Laura Harshbarger at laura.harshbarger@fema.dhs.gov. Quotes are due no later than 12:00 PM EST, 08 June 2020. The Federal Emergency Management Agency requests quotes from qualified sources capable of providing ANP Technologies 8 each 5L-001-20PK NIDS Multiplexed Handheld Immunochromatographic Assays and 60 each SK-001 NIDS Sampling Kit for Surfaces and Powders (brand name only) as detailed below. A brand name only acquisition is supported by the rationale contained in the attached Sole Source Justification, brand name only. The successful bidder must be authorized by the manufacturer to distribute the items specified herein. All terms, conditions, requirements, clauses and provision herein shall apply to this combined synopsis/solicitation. All offerors shall submit a quote for all the following. PRICE/COST SCHEDULE: ITEM DESCRIPTION OF QTY UNIT UNIT AMOUNT NO. SUPPLIES/SVCS PRICE 0001 8.00 EACH ____________ _______________ NIDS 5-Plex 1 Assay, PN 5L-001-20PK 0002 60.00 EACH ____________ _______________ NIDS Sampling Kit, SK-001 Price must include shipping and handling, FOB destination. If shipping cost is additional, please be sure to include any applicable shipping cost to the quote as delivered to Anniston, AL. DELIVERY SCHEDULE: ITEM NUMBER QUANTITY DELIVERY 0001 8.00 90 Days ARO 0002 60.00 90 Days ARO PLACE OF DELIVERY: DHS/FEMA Center for Domestic Preparedness (CDP) 40 Twill Lane Anniston, AL 36205 ATTN: Monica Sheffield All applicable manufacturer commercial warranties shall be valid for all products. TYPE OF CONTRACT: The Government contemplates award of a Firm Fixed Price contract resulting from this combined synopsis/solicitation. PROVISIONS AND CLAUSES: FAR 52.212-1, Instructions to Offerors---Commercial Items, apply to this acquisition with the exception of (d), (h), and (i) of the clause, which are RESERVED; FAR 52.212-2 Evaluation Commercial Items. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offe...

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:70FA2020Q00000026
  1. Combined Synopsis
  1. Combined SynopsisCurrentMay 22, 2020

    ANP Technologies NIDS Assays and Sampling Kits

    Notice abb76ca6652343e1a1a386229a4809d6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Simplified Acquisition - Purchase of 4 Canberra gamma radiation detector repair service for the National Analytical Radiation Environmental Laboratory
-Solicitation11/12/2026
This requirement is for four optical emission spectrometers and ancillary equipment in accordance with the statement of work. This includes two each benchtop optical emission spectrometers with ancillary equipment to be installed and two each portable optical emission spectrometer with ancillary equipment.
-Solicitation09/15/2026
This requirement is for four optical emission spectrometers and ancillary equipment. This includes two each benchtop optical emission spectrometers with ancillary equipment to be installed and two each portable optical emission spectrometer with ancillary equipment. This procurement will be solicited full and open competition. Estimated issue date is 11 August 2026.
-Pre-Solicitation09/08/2026
The U.S. Department of Homeland Security (DHS)/Federal Emergency Management Agency (FEMA) intends to negotiate on a Sole Source basis (IAW FAR 13), with Smiths Detection located at 2202 Lakeside Blvd, Edgewood, MD, 21040, as the only responsible source that is capable of providing a customized service agreement for (24) Smiths Detection Lightweight Chemical Detectors (LCDs). Smiths Detection is the only acceptable vendor capable of providing a customized service agreement for the existing base of Smiths Detection LCDs used at the Center for Domestic Preparedness (CDP), Anniston, AL. The anticipated period of performance is through April 30, 2027, plus 1 one-year option. This acquisition is being conducted under simplified acquisition procedures (IAW FAR 13). There are no set-aside restrictions for this requirement. The intended procurement will be classified under North American Industry Classification System (NAICS) 334519 with a Small Business Size Standard of 600 employees. This notice of intent is not a request for competitive proposals and no solicitation document exists for this requirement. However, parties interested in responding to this notice will need to submit technical data sufficient to determine capability in providing the same product. All capability statements received within 11 days after publication of this synopsis will be considered by the Government. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Capability statements shall be submitted by email only as a MS Word or Adobe PDF attachment to Laura Harshbarger, Laura.Harshbarger@fema.dhs.gov. Statements are due by July 6, 2026, 4 PM EST. No phone calls will be accepted.
-Special Notice07/06/2027
Sources Sought Notice Sources Sought Notice Page 5 of 5 Sources Sought Notice *= Required Field Sources Sought Notice Page 1 of 5 This is NOT a solicitation or request for quote. This is NOT a request for proposal. This is NOT a job advertisement for hiring employees. The VA is seeking QUALIFIED VENDORS to provide a very brief response to this notice including only just what is asked for in this notice below. This is sources sought notice to industry and the only information is posted on Contract Opportunities web page at SAM.gov. Sources sought means seeking qualified vendors. The attachments included on the Contract Opportunities page do not include any additional information. If your company is interested, please read this notice entirely and submit the required information, as requested herein. Automated Blood Culture Analyzers and Bottles Four (4) VA Medical Centers: Fort Harrison, MT, Cheyenne, WY, Grand Junction, CO and Sheridan, CO BRIEF SCOPE OF WORK (This is for information only) IMPORTANT NOTE: This Sources Sought is for market research purposes only (to determine the socioeconomic status of interested companies). No award will be made off this posting. The four (4) VA medical centers each require an automated blood culture analyzer with corresponding blood culture bottles. It is anticipated the blood analyzer would be provided to each facility for use for a base period (1 year) with four (4) additional optional years. **The current blood culture analyzer in use at each facility is the BD (Becton Dickinson) BACTEC FX40 Automated Blood Culture System** Overview of Items (5-years): Line Item # Description Unit Base Yr Qty OY#1 Qty OY#2 Qty OY#3 Qty OY#4 Qty Fort Harrison, MT 0001 Blood Culture Analyzer EA 1 1 1 1 1 0002 Blood Culture Management Computer and Software EA 1 1 1 1 1 0003 BOTTLE PLASTIC AEROBIC/F 50/PK PKG 26 26 26 26 26 0004 BOTTLE PLASTIC LYTIC/ANAEROBIC/F/F 50/PK PKG 26 26 26 26 26 0005 BOTTLE PLASTIC Myco F Lytic 50/PK PKG 3 3 3 3 3 0006 Connectivity & Workflow Management EA 1 1 1 1 1 Cheyenne, WY 0007 Blood Culture Analyzer EA 1 1 1 1 1 0008 Blood Culture Management Computer and Software EA 1 1 1 1 1 0009 BOTTLE PLASTIC AEROBIC/F 50/PK PKG 28 28 28 28 28 0010 BOTTLE PLASTIC LYTIC/ANAEROBIC/F/F 50/PK PKG 28 28 28 28 28 0011 BOTTLE PLASTIC PEDS PLUS/F 50/PK PKG 4 4 4 4 4 0012 Connectivity & Workflow Management EA 1 1 1 1 1 Grand Junction, CO 0013 Blood Culture Analyzer EA 1 1 1 1 1 0014 Blood Culture Management Computer and Software EA 1 1 1 1 1 0015 BOTTLE PLASTIC AEROBIC/F 50/PK PKG 20 21 22 23 24 0016 BOTTLE PLASTIC LYTIC/ANAEROBIC/F/F 50/PK PKG 20 21 22 23 24 0017 BOTTLE PLASTIC PEDS PLUS/F 50/PK PKG 1 1 1 1 1 0018 Connectivity & Workflow Management EA 1 1 1 1 1 Sheridan, CO 0019 Blood Culture Analyzer EA 1 1 1 1 1 0020 Blood Culture Management Computer and Software EA 1 1 1 1 1 0021 BOTTLE PLASTIC AEROBIC/F 50/PK PKG 12 12 12 12 12 0022 BOTTLE PLASTIC LYTIC/ANAEROBIC/F/F 50/PK PKG 12 12 12 12 12 0023 Connectivity & Workflow Management EA 1 1 1 1 1 0024 Remote Alert System (After Hours) EA 1 1 1 1 1 Statement of Work: 1.0 Scope of Work The microbiology department of the Pathology and Laboratory Medicine Service (P&LMS) requires a cost per bottle contract to provide new automated Blood Culture instruments for use at the Ft. Harrison campus of the VA MT Healthcare System, Cheyenne VAMC, Sheridan VAHCS, and Grand Junction VAMC. Equipment and supplies must be installed, fully approved by the station team, and ready for use no later than May 1st, 2027. The awarded contract will have a one-year base period with four annual option periods. 2.0 Tasks The vendor shall provide all automated blood culture instruments, supervision, parts, labor, software, preventative maintenance, materials, and incidentals in order to ensure fully successful blood culture test and meet or exceed all listed requirements in the specifications below. 2.1 General Requirements Requirements, as set forth in this statement of work are minimum standards and shall not be construed as limiting the overall quality, quantity, or performance of the instrument. The vendor shall maintain the performance and overall quality of all instrument systems during the period of performance to all software upgrades, equipment, maintenance, parts, and labor to ensure full functionality and currency of new automated blood culture instruments. The instrument system, based upon the specifications requested, shall be the newest and the most current model. Refurbished systems are not acceptable. The instrument must be a standard product of the manufacturer of record. The manufacturer of record is defined as a company whose main occupation is the manufacture for sale items of equipment and which: Maintains a factory production line. Maintains a stock of replacement parts for the item. Maintains engineering drawings, specifications, operating manuals and maintenance manuals. Has published and distributed descriptive literature and equipment specifications on the equipment. The analyzer cabinet/instrument shall be a countertop model fitting within the following available spaces: Montana 75 in W x 45 in D Cheyenne 45 in W x 30 in D Grand Junction 87 in W x 30 in D Sheridan 31 in W x 36 in D If the proposed analyzer does not fit the dimensions of any of the stations above, a contractor provided cart may be used if the station agrees and has the room for it. All equipment/supplies/bottles and software must be FDA-approved at time of award 2.2 System Requirements The instrument system shall meet the following requirements: Use plastic and glass culture bottles that are specific to the instrument system and the culture bottles used in the instrument should contain a neutralizing resin media for the aerobic culture bottle and a lytic broth media for the anaerobic culture bottle. + Be able to accept and analyze blood, fungal and an acid, fast, bacteria (AFB) culture bottles. Be able to accept and analyze both blood and body fluid specimens. Utilize a varied selection of blood culture bottle configurations (low volume samples; antimicrobial agent removal resins) and formulations capable of maximizing growth potential of various microorganisms (e.g. aerobic and anaerobic bacteria, fungi, and mycobacteria) shall be available. Have the capability to flag and alert the end-user of positive culture vials by simultaneous visual alert, sound alert and remote alert using existing software programs. The Sheridan VAMC lab does not run 24/7 so the contractor shall provide a system by which their AODs (Administrative Officer of the Day) can monitor the system remotely 24 hours per day. Provide self-contained, continuous, computerized, automated monitoring of blood culture bottles with immediate, active (e.g. audible alarm) notification of microorganism growth based upon pre-programmed criteria and notification of termination of maximum programmed incubation period when no microorganism growth is detected. Allow for operator extension of programmed incubation times while testing is in progress, without interruption of automatic continuous monitoring. Have the capability to monitor the blood volume in each culture bottle. Utilize sufficient safety features to avoid unnecessary exposure to biohazardous and chemical material. The exposure to and the volume of biohazardous and chemical material generated by the equipment must be minimal and require a minimum amount of handling. Have the capability to detect and document elapsed time to positivity. Have bar code reading capability to eliminate the need for manual entry of patient information for each sample. Contractor bar code formats shall meet requirements of VA lab information system software. Have the capability to scan the culture vial sequence and specimen accession label in any order. Have the capability to accept the culture vial in any available station. Have the ability to provide automated transmission of test results into the laboratory s current laboratory information system LIS. Contractor must be able to send information through Data Innovations (DI) instrument server and have DI driver available. Must provide all hardware and software needed to connect via TCP\IP protocol, as well as communicate with government VISTA protocols and system. Utilize Food and Drug Administration (FDA)-cleared software. Contain a report module that has the ability to generate epidemiology and statistical reports. Contain a data management system that allows users to monitor and analyze data. Provide printed paper results in the event of computer down time. Have the ability to electronically archive patient results. Have the ability to generate cumulative quality control (CQC) reports. 2.3 Instrument Requirements When requested, the instrument cabinet should be able to hold a minimum of 200 culture bottles Some facilities may have smaller minimum volume requirements. The vendor should have a variety of instrument sizes and types to accommodate the estimated annual volume requirement for each facility. The instrument should take up minimal space and have the ability to stack incubation cabinets on top of each other. The instrument should require only minimal maintenance by government personnel. The instrument must include an on-board programming display and be user friendly. The instrument system must include a 120-volt Uninterrupted Power Source (UPS) system that has a 30-minute backup capability in the event of electrical power interruptions. The system should also have provisions for saving data in the event that the capacity of the UPS is exceeded. The vendor shall provide all software upgrades and a field technical representative from the instrument manufacturer shall install the updated software at no charge within a reasonable time and shall coordinate with the laboratory supervisor. The instrument system shall have the ability to accept upgrades so as to accommodate the need for increased testing volume. Software must be compatible with Bruker MALDI bio-typer 2.4 Supply Requirements The vendor shall: Supply a variety of plastic and glass culture bottle types and allows flexibility in the selection of culture bottle types required based on facility needs. Shall provide customer helpline telephone numbers for VAMC laboratory technicians to the call-in routine and emergency supply request. The vendor shall supply all necessary point of contact information and ordering procedures for VAMC laboratory technicians to order reagents and other supplies for both a standing delivery schedule basis or on an as-needed basis. Fill routine and emergency supply requests when requested. Pay shipping fees for all supplies, consumables, and equipment needed to perform installation start-up testing. Provide ancillary components that are necessary for the model of equipment proposed (i.e. starter kits, tables, stands, etc.). List all reagents, controls and disposables required for operating the instrument and producing quality results as an addendum in the pricing schedule. 2.5 Repair & Maintenance Services The manufacturer shall provide technical support either by phone or on-site. Service should include all travel, parts for repair or replacement, and labor. The vendor shall provide a preventative maintenance schedule to include a minimum of one scheduled preventative maintenance visit per year. The vendor shall be responsible for the removal of the hard drive of the analyzer upon removal/upgrade of the instrument. The hard drive shall be given to the laboratory VA information system manager for disposal. The service shall include replacement or repair of all ancillary equipment (i.e. printers, monitors, UPS) necessary for the system to operate efficiently. 2.6 Pre-Installation Assessment The vendor shall provide written information detailing all maintenance, environmental, and utility requirements (electrical, dimensions of equipment, media disposal, etc.) as part of their proposal to include the following information. If the equipment proposed is particularly heavy, advisement of extra reinforcement shall be necessary. Provide dimensions of the system. List utility requirements (electrical, heat/cool, humidity, etc.) Describe testing methodology. List quality control (QC) frequency. Describe maintenance requirements for daily/weekly/monthly maintenance. Describe any environmental impact issues that instrumentation may create (water requirements, media disposal, etc.). Describe user friendliness: Describe software and/or supporting instrumentation provided with the system to maintain or improve levels of data retrieval which may be used for monitoring epidemiology trends. Describe reagent management (storage and waste). Describe ability to trouble-shoot system. Describe how system alerts user of positive and negative culture bottles. Provide list of reagent recalls/bulletins within the last two years. List reagent unavailability due to manufacturing issues within the last two years. Environmental requirements (heat/cool, humidity, light, etc.) and recommendations for instrument and testing material storage. Manufacture s maintenance requirements indicating what maintenance is performed by the end-user and what maintenance is performed by the manufacturer by providing outline or brochure outlining frequency of preventative maintenance. 2.8 Laboratory Information System (LIS)/Interface Software must be compatible with all barcode styles and have proven bi-directional interface capability with the laboratory s current LIS. The vendor must provide additional hardware (i.e. middleware) and software needed to interface the system and provide technical assistance with interfacing the instrument system. Required (additional) interface connection license(s) shall be provided at vendor cost. The instrument-LIS interface must be bi-directional. The interface must use automatic host query to download sample, IDs, test requests, and patient demographics. Automatic host query must seamlessly integrate with on-board patient sample barcode scanning and translation. The instrument interface must transmit test results to the host computer system via automatic upload. Instrument system must have computer capabilities that are compatible with the end-user s LIS software and include an LCD display monitor and printer. The vendor shall provide technical support to link the instrument to the LIS interface and ensure that the instrument system is communicating properly. Vendor must successfully interface the analyzer via a Data Innovations Instrument Manager to the VA VISTA system. Must be compatible Bruker MALDI bio-typer 2.9 Support Services: The manufacture should have the ability to provide service sufficient to meet the needs of the end-user facility, 7 days a week, business hours for all sites. A field engineer must be available within 24 hours of after the service call has been placed. All repairs to the instrument must be complete within 24 hours from the time the field service engineer arrives. The vendor s staff shall designate in writing to the contracting officer a fully qualified primary and alternate Field Service Representative who has the authority and knowledge to respond to all technical/maintenance/repair issues. Fully qualified is based upon training and experience in the field. For training, the Field Service Representative must have successfully completed a formalized training program for the equipment covered under the contract. For field experience, the Field Service Engineers must have a minimum of one (1) year of experience providing preventative maintenance and emergency repair services on the same make and model of equipment covered under this contract. The vendor shall provide 24-hour, 7 days/week telephone technical support. The vendor shall submit a legible field service report to the laboratory supervisor itemizing the preventive maintenance inspection or emergency repair services performed, including replaced parts and estimated prices required for the service call. The vendor shall coordinate on all potentially hazardous safety issues with the contracting officer and laboratory supervisor. 3.0 Installation, including Instrument Validation & Training A technical support specialist from the instrument manufacturer shall assist in equipment installation/set-up, providing all manpower, procedures, and reagents/supplies to perform validation and correlation studies [evaluation/comparison data sufficient to satisfy College of American Pathologists (CAP) standards]. The vendor must provide required statistical analysis of the validation and correlation data in an organized binder for on-site director approval. The statistical analysis must be completed within eight weeks of installation of the system. The vendor/distributor and/or the manufacturer must provide all necessary procedure manuals, troubleshooting manuals and operator manuals. The vendor shall provide primary user training for a minimum of one user per instrument with on-site basic operating and maintenance education/training performed during initial installation and when updates to the equipment are performed. Training is to include all costs related to off-site training (transportation, room and board, etc. if applicable). Any additional costs such as industrial funding fees, special shipping and handling fees, or other usage fees must be included in the contract price or identified separately in the proposal. 4.0 Delivery and Acceptance 1. All items shall be shipped F.O.B. destination to the following locations M-F, 8am-4pm, excluding holidays: FT Harrison VAMC 3717 Veterans Drive Ft. Harrison MT 59636, Cheyenne VAMC 2360 East Pershing Blvd Cheyenne WY 82001 Sheridan VAMC 1898 Fort Road Sheridan WY 82801 Grand Junction VAMC 2121 North Avenue Grand Junction CO 81501 The Contractor, its employees, agents, and subcontractors shall not be considered VA employees for any purpose of fulfilling the PWS and shall be considered employees of the Contractor. Contractor shall furnish all labor, materials, equipment, tools, shipping, transportation, insurances, licenses, certifications, and supervision necessary to provide services in accordance with this Performance Work Statement (PWS). The Contractor is responsible for all charges and fees related to disposal of materials generated by the Contractor. This is anticipated to be a commercial supply acquisition under the authority of FAR Part 12, Simplified Acquisition Procedures for Commercial Items. The products will be delivered to the following locations: FT Harrison VAMC 3717 Veterans Drive Ft. Harrison MT 59636, Cheyenne VAMC 2360 East Pershing Blvd Cheyenne WY 82001 Sheridan VAHCS 1898 Fort Road Sheridan WY 82801 Grand Junction VAMC 2121 North Avenue Grand Junction CO 81501 IMPORTANT NOTE: This RFI (Request for Information) is for information only. No award will be made from this RFI. QUALIFIED VENDOR: A qualified source has the a) necessary equipment, vehicles, personnel, resources and current operations as well as b) recent experience (within past 3 years) of performing services of a comparable size, scope and complexity, AND c) OEM certified technicians to perform services with unrestricted access to the facility during inclement weather, as well as immediate access to OEM software updates. A qualified source also has current and valid registration in System for Award Management (SAM), https://www.sam.gov). Please communicate via e-mail to Stephanie.Cahill@VA.Gov by 15:00 MST on November 20th, 2026, as to your company s ability to perform service per this brief Scope of Work. If interested, please provide the following: Provide company s capability statement describing ability to provide equipment that meets or conforms to the salient characteristics listed above *include specification or brochure documents for confirmation of equivalent products* Company s business size in relation to NAICS 334516 and socio-economic category (SDVOSB/VOSB/WOSB/Large Business): SAM UEI: FSS/GSA contract # (if applicable): **Indicate Open Market if items are not included on FSS/GSA/etc.** Estimated delivery lead time: Where are the products manufactured/COO: Only written responses, to items 1 through 6 above, will be accepted at this stage. Information is being gathered for market research purposes only. Industry exchanges and vendor teleconferences are at the discretion of the Contract Specialist. This is not a request for quotes. DISCLAIMER: This is a Request for Information (RFI) from industry in accordance with Federal Acquisition Regulation (FAR) 15.201(e) and on the requirement, that exists for the VA Medical Center(s) identified in this RFI. This is not a request for quote and not a contract. This announcement is not a request for proposals; therefore, responses to the RFI are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. Responders are solely responsible for all expenses associated with responding to this RFI. No classified information should be included in the RFI response. Should you have concerns regarding this RFI you may request to contact the Contracting Office that will be assigned this requirement by emailing the sender of this RFI. Questions must be addressed in writing to the Contract Specialist. Requests for VA-business sensitive information, to include VA budget information, VA acquisition planning information, acquisition methods, strategies and set-asides must be addressed via the VA FOIA process: https://www.va.gov/foia/ Thank you for your interest in doing business with the VA. To learn more about the VA Mission, Vision, Core Values & Goals visit https://www.va.gov/about_va/mission.asp To understand the latest updates on the Veterans First Contracting Program visit https://www.va.gov/osdbu/verification/veterans_first_contracting_program_adjustments_to_reflect_the_supreme_court_kingdomware_decision.asp To find out how to do business with the VA visit https://www.va.gov/osdbu/library/dbwva.asp
-Market Research11/20/2026

Additional Details

Solicitation Number

70FA2020Q00000026

Archive Date

Jun 23, 2020

Office Address

WASHINGTON, DC, 20472