Notice ID: 9b5bd633eac9452f890fbe7d5a50b11eCombined Synopsis/Solicitation
Federal Facilities Temperture Screening
Archived on June 2, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−07:00
- Posted
- May 11, 2020
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- NAICS 541 Professional, Scientific, and Technical Services (reported as 541000)
- Agency
- Department of Homeland SecurityFEDERAL EMERGENCY MANAGEMENT AGENCY
Notice details
- Office
- REGION 10: FEDERAL EMERGENCY MANAGEMENT
- Place of performance
- Bothell, WA, 98021
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 70FBR020Q00000001
- Notice ID
- 9b5bd633eac9452f890fbe7d5a50b11e
Description
As an additional preventive measure in response to the COVID-19 virus, Federal Emergency Management Agency (FEMA) Region 10 has a requirement to hire a contractor to conduct temperature screening at two Regional Offices as a prerequisite for entry into the facilities for an undetermined time while the COVID-19 virus threat persist. Refer to the attachment identified as FEMA Facility Mandatory Temperature Screening Procedures Environmental, Safety, and Health (ESH) Safety Official Facility Pre-Entry Screening Procedural Guidance March 23, 2020 (v2.0). This document established the objectives necessary to properly implement this screening process. Location of services will be preformed at FEMA Region 10 FRC, 130 228th ST SW, Bothell, WA 98021 and FEMA Region 10 Northview Corporate Center (NCC), Fourth Floor Suite 400, 20700 44th Ave. W, Lynnwood, WA 98036. The contractor will provide a minimum of two contractors to perform screening in accordance with FEMA guidance. This is a combined synopsis/solicitation for services prepared in accordance with the format in subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation WILL NOT be issued. The solicitation number is 70FBR020Q00000001. This combined synopsis constitutes a solicitation and incorporates provisions and clauses in effect through Federal Acquisition Circular 2007. Please note that any solicitation package materials, documents, drawings, specifications, and/or attachments to the anticipated solicitation will be available only electronically and via the government point of entry found at www.fbo.gov. Hard copy documents will not be supplied by the government to any interested parties as a result of this solicitation. Vendors submitting quotes to this requirement must be actively registered in the System for Award Management (SAM) to participate; quotes received from vendors that are not currently registered will be rejected. Website: http:www.sam.gov Quotes must be submitted by the required deadline to the point of Contact listed via email. Onsite visit required prior to award and to take place on May 15th, 2020 at 10AM PST. Arrangements must be made to attend site visit 24 hours in advance with Richard Albidress at Richard.Albidress@fema.dhs.gov. Award subject to funds availability. Reference attached Statement of Objectives, it is for two seperate locations within close proximity.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
70FBR020Q00000001- Combined Synopsis
- Combined SynopsisCurrentMay 11, 2020
Federal Facilities Temperture Screening
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
DESCRIPTION OF REQUIREMENT: The U.S. Coast Guard requires annual inspection, testing, and maintenance of the fire protection systems for multiple facilities located at USCG AIRSTA Port Angeles. The work consists of providing all labor, equipment, material, transportation, supervision, items and services necessary for properly performing inspection, testing, and maintenance of fire protection systems in multiple buildings, including an aircraft hangar, in accordance with NFPA 11, NFPA 25, NFPA 70, NFPA 72, and NFPA 80 at Air Station Port Angeles. The Government intends to issue a firm-fixed-price purchase order for this project. The full scope of work and specifications are included in the solicitation documents. PROJECT ADDRESS: U.S. Coast Guard Air Station Port Angeles 1 Ediz Hook Road Port Angeles, WA 98362 United States Classification: This acquisition is set-aside 100% for SMALL BUSINESS. The associated NAICS code is 541990 - Classified as All Other Professional, Scientific, and Technical Services cross referenced as Waterless fire suppression system testing and/or inspection, without sales, service, or installation. The contract type will be firm fixed price purchase order. Where Federal Acquisition Regulation clause language is inconsistent with FAR 13.004, Legal Effect of Quotations, that language is hereby tailored in accordance with FAR 12.302 to be consistent with a request for quotations. This tailoring includes but is not limited to the following: In accordance with FAR 13.004, a quotation is not an offer, and any clause provision to the contrary is hereby modified to be consistent with FAR 13.004. Where the word "offer/offeror" or a derivative of that word appears, it is changed to "quote/quoter" or a derivative of that word. Site Visit: There will be no site visits held for this solicitation. Questions: Any and all questions regarding this solicitation shall be submitted in writing to the Contracting Officer at patrick.r.gittings@uscg.mil with solicitation RFQ number 70ZL3227Q20190001 in subject line. Questions regarding the statement of work (SOW) will be forwarded to the technical expert for an accurate response. All responses will be uploaded for an equal and fair solicitation to all interested vendors solely on SAM.gov. No more questions will be answered after 3:00 PM PDT on November 19th, 2026. Quote submission: Prohibition on Extraneous Material: Do not submit any unnecessary documents, promotional marketing materials, general company history brochures, or generic cover letters. Quotes must contain only the specific information requested below. Extraneous documents will not be evaluated. Quotes must be submitted electronically to patrick.r.gittings@uscg.mil by the date and time specified in this solicitation. Incomplete submissions may be considered unresponsive and submissions that fail to adhere to these instructions may be considered disqualified and ineligible for award. A complete submission shall consist of the following parts: SF 1449: Complete and sign the provided Standard Form (SF) 1449. COMPLETE BLOCKS 12, 17, 20, 23, 24, AND 30, with a breakdown of all costs listed in block 20 and with the total firm-fixed-price bid in block 24. Technical Proposal: The Technical Proposal shall not exceed two (2) pages in length. It must provide a clear, concise narrative demonstrating the quoter’s understanding of and ability to meet the requirements of the Statement of Work (SOW). The proposal must include: 1. Technical Approach: A step-by-step description of how the quoter will perform the work in accordance with the Scope of Work. 2. Project Schedule: A high-level timeline illustrating the project's major milestones. The schedule must start from the date of the Notice to Award (NTA) and demonstrate that all work, including performance verification and report submission, will be completed within the required Period of Performance. Milestones should be shown in terms of days from the NTA (e.g., "Inspection of System(s) Complete: Day 3," "System(s) Repaired: Day 6," "Final Acceptance Testing: Day 9"). Submit quotes to the following E-mail Address Patrick.R.Gittings@uscg.mil with solicitation RFQ number 70ZL3227Q20190001 in the subject line. Date of offers due on 11/23/2026 at 3pm (PST). All offers that are submitted late (by day and time zone) and quotes that do not include a complete submission will not be considered in award determination. Award: It is the government’s intent to award to the offeror who proposes a price that is fair and reasonable and provides the lowest priced, technically acceptable (LPTA) quote meeting the specifications of the requirement. If the lowest priced quote is not found to be technically acceptable, the contracting officer will evaluate the next lowest priced quote, and so on. Quotes determined to be incomplete, unreasonable, or unrealistic will not be considered for award. Under FAR 4.1103 prospective contractor shall be registered in System Award Management (SAM) prior to award. Failure for contractor to be registered in SAM shall result in Contracting Officer to proceed with next successful registered offeror. Website: www.sam.gov. | - | Combined Synopsis | 11/23/2026 |
Large Business Firms: 70Z05026D43000001 – WSP HDR, a Joint Venture (UEI: ZTB1ZS168ZF3) 70Z05026D43000002 – TranSystems Corporation (UEI: M3QZCWH5LB14) 70Z05026D43000003 – Collins—Mott Macdonald-STV DHS AE JV (UEI: RCAWVU557T69) 70Z05026D43000007 – M&N-Stantec Nationwide JV (UEI: PFFNTGHCMUG6) 70Z05026D43000008 – Jacobs Government Services Company (UEI: HDMBNDVCLYJ7) 70Z05026D43000009 – The Haskell Company (UEI: SZKNP57U5UK3) 70Z05026D43000011 – Clark Nexsen Michael Baker JV (UEI: RAJJEGKBN5S3) 70Z05026D43000012 – CDM Federal Programs Corporation (UEI: DHS5ZJSFCSH9) 70Z05026D43000013 – AECOM Technical Services, Inc. (UEI: EPUXNLX5EYC4) Small Business Firms: 70Z05026D43000004 – Reid Middleton Inc. (UEI: JZ8XL55CBQL3) 70Z05026D43000005 – M.J. Engineering (UEI: QLLQMM7C7J56) 70Z05026D43000006 – The Johnson-McAdams Firm P.A. (UEI: YLLDX22XAKB5) 70Z05026D43000010 – Colby Co. LLC (UEI: K5LXVGFE7YS7) CONTRACT TERMS: The contracts include a single base year ordering period for a total maximum duration of 10 years. The aggregate total capacity of the ten contracts is $1,000,000,000. There are no annual or per contract limits. The minimum order is $3,000. The A/E firms are not obligated to honor orders in excess of $10,000,000. All Contracting Officers within DHS may use this contract. Services cover the entire United States and its territories. BASE ORDERING PERIODS: Ordering Period 1: June 02, 2026, to June 01, 2027 Ordering Period 2: June 02, 2027, to June 01, 2028 Ordering Period 3: June 02, 2028, to June 01, 2029 Ordering Period 4: June 02, 2029, to June 01, 2030 Ordering Period 5: June 02, 2030, to June 01, 2031 Ordering Period 6: June 02, 2031, to June 01, 2032 Ordering Period 7: June 02, 2032, to June 01, 2033 Ordering Period 8: June 02, 2033, to June 01, 2034 Ordering Period 9: June 02, 2034, to June 01, 2035 Ordering Period 10: June 02, 2035, to June 01, 2036 | - | Awarded | Open |
This Broad Agency Announcement (BAA) seeks the best RDT&E approaches to meet various technology objectives of Air Force Technical Application Center (AFTAC). The Government encourages proposals that span a wide spectrum of possible technical and business solutions in response to the specific technology topics stated in Attachment 6. The Government reserves the right to award funding to any combination of proposals which offer the best overall value to the Government, and to oversee any and all processes and approaches once initiated. Awards of efforts as a result of this announcement will be in the form of contracts or other transactions (OT) as codified in 10 U.S.C. §2371b (section 2371b). AFTAC is looking for new capabilities in nuclear treaty monitoring, advanced detection technologies to support the counter-proliferation of weapons of mass destruction and other applied technologies. TOPICS: AFTAC-001, GEOPHYSICS AND SEISMOLOGY AFTAC-002, ATMOSPHERE AND SPACE AFTAC-003, DIRECTED ENEGRY WEAPON (DEW) AFTAC-004, NUCLEAR AND NUCLEAR-RELATED MATERIALS ANALYSIS AFTAC-005, MATERIALS MODELING AND ANALYSIS AFTAC-006, ENTERPRISE WIDE INTEGRATION AND ARCHITECTURE MODERNIZATION AFTAC-007, ENTERPRISE ASSET AND LIFECYCLE MANAGEMENT IMPROVEMENTS AFTAC-008, HIGH PERFORMANCE AND SECURE CLOUD COMPUTING AND DEV OPS SOLUTIONS FOR DATA INGESTION, EXPLOITATION, AND DISSEMINATION This is a follow-on solicitation to AFTAC_BAA_2023 | - | Combined Synopsis | 04/24/2029 |
DISCLAIMER: Please be advised that this combined synopsis/solicitation has been transferred from the 771 ESS to the 772 ESS and is a continuation of combined synopsis/solicitation FA8003-25-S-C001. Please see updated POCs below and any inquiries may also be sent to the new org box: 772 ESS/Speed CSO at 772ESS.Speed.CSO@us.af.mil. Note: "Open" indicates that submissions may be provided at any time. "Closed" indicates that there is a definitive due date for submissions. REVISED POSTING: Revised attachment below, dated 16 April 2026. REVISED POSTING: See revision in bold in description below and in the revised attachment below, dated 18 March 2026. AMENDMENT 15: Closed - 2701 - Commercial Toolkit for Alternative Construction Acquisition (Added 10/28/2026) Due 11/28/2026) See attachment below. AMENDMENT 14: Closed - 2613 - Modernized Facility Space Planning Capabilities (Added 09/29/2026) Due 10/29/2026) See attachment below. AMENDMENT 13: Open - 2612 - Resilient, Permanent Expeditionary Facility Prototype Demonstration (Added 09/28/2026) See attachments below. AMENDMENT 12: Closed - 2611 - USAFA Chapel White Box Enclosure Concepts (Added 09/03/2026) Due 09/08/2026 See attachments below. AMENDMENT 11: Closed - 2610 - Radio Frequency (RF) Spectrum Monitoring System (Added 04/20/2026) Due 04/30/2026 Update: This amendment due date has been extended from 27 April 2026 to 30 April 2026, 5:00 P.M. CDT. See attachment below. AMENDMENT 10: Closed - 2609 - Innovative Housing Enterprise Management Solutions (Added 04/08/2026) Due 05/12/2026 See attachment below. AMENDMENT 9: Closed - 2608 - BRAC Innovative Approaches, Technologies and Methodologies (Added 03/27/2026) Due 04/28/2026 Update: This amendment adds the Q&As v2. See Q&A v2 attachment below. Update: This amendment adds the Q&As v1. See Q&A v1 attachment below. See attachment below. AMENDMENT 8: Closed - 2607 - As-Built Building Information Modeling (BIM) Data Acquisition (Added 03/16/2026) Due 04/16/2026 Update: This amendment adds the Q&As. See Q&A attachment below. See attachment below. AMENDMENT 7: Closed - 2606 - AFCEC Enterprise-Wide Contracting Data Repository and Dashboard (Added 03/13/2026) Due 04/14/2026 Update: This amendment adds the Q&As v2. See Q&A v2 attachment below. Update: This amendment adds the Q&As. See Q&A attachment below. See attachment below. AMENDMENT 6: Closed - 2605 - Data Science Capability and Framework (Added 02/12/2026) Due 04/02/2026 Update: This amendment adds the Q&As making some changes on submission requirements and the due date has been extended to 02 April 2026, 5:00 P.M. CDT. See Q&A attachment below. See attachment below. AMENDMENT 5: Closed - 2604 - Unified Facility Criteria Design Kits (UDK) (Added 01/27/2026) Due 02/26/2026 See attachment below. AMENDMENT 4: Closed - 2603 - Base Oversight and Autonomous Response (BOAR) sUAS Framework (Added 01/22/2026) Due 02/22/2026 See attachment below. AMENDMENT 3: Closed - 2602 - AFCEC Business Systems Modernization IT (Added 01/21/2026) Due 03/10/2026 See attachment below. AMENDMENT 2: Closed - 2601 - Optimizing AFCEC CE IT Porfolio: Strengthening Systems for Global Operations (Added 10/1/2025) Due 11/1/2025 See attachment below. AMENDMENT 1: Open - 2501- Construction Cost and Schedule (Open) (Added 9/16/2025) The Government seeks an innovative solution to improve project outcomes by combining benchmarking with forward-looking market intelligence. The innovative solution shall emphasize optimizing total cost of ownership, differentiating discretionary versus mandatory requirements, and iterative investigation across all levels of a project, from macro design to micro equipment selection. The innovative solution shall incorporate data-driven insights to be framed by including a project delivery navigator that integrates structured and unstructured data, and the importance of considering external factors like commodity prices, local labor dynamics, and Engineering, Procurement and Construction (EPC) market intelligence to predict and improve project performance, ultimately advocating for aggressive design challenges and industrialized production processes to achieve successful project delivery. INITIAL POSTING: Description The purpose of this CSO is to allow for competitive selection of innovative commercial items, technologies, and services to obtain solutions or new capabilities that fulfill requirements, close capability gaps, or provide potential technological advancements in meeting the AFIMSC’s Areas of Interest (AoI). The Air Force Installation and Mission Support Center (AFIMSC) is a vital engine for fostering innovation throughout the Air Force. It functions as a dynamic community,bringing together a diverse group of individuals from active duty, Air National Guard, Air Force Reserve, civilian service, and contractor roles. This broad mix of backgrounds and experiences is crucial for generating creative solutions the Air Force needs to meet evolving challenges. AFIMSC acts as a central connector, linking Airmen with the resources necessary to transform innovative ideas into reality. This includes securing funding for promising projects, forging connections with industry experts and companies who offer specialized knowledge and technologies, and providing expert guidance and mentorship to navigate the often complex path of development and implementation. A core element of AFIMSC's strategy is cultivating and facilitating agile engagements fostering collaboration with entities outside the traditional military structure. They embrace the principles of open innovation, understanding that valuable solutions can emerge from diverse sources. AFIMSC actively bridges the gap between the Air Force and the wider innovation ecosystem, engaging with established companies, startups, universities, research institutions, and even non-traditional contributors who may not have previously worked with the military. This "bottom-up" approach empowers Airmen at all levels to identify challenges and propose solutions, ensuring that innovation is driven from the ground up. Solutions presented gain valuable visibility within the Air Force and other government entities, potentially informing future contract solicitations, grants, and agreements. Successful solutions may be selected for prototyping, testing, demonstration, and eventual deployment. Ultimately, AFIMSC contributes to the growth and development of the non-traditional military business ecosystem, strengthening relationships between the Air Force and the private sector and driving the development of innovative solutions to critical Air Force challenges. In essence, AFIMSC is adriving force, helping the Air Force embrace innovation and adapt to a rapidly changing world. This CSO will utilize a solicitation process authorized by DFARS Subpart 212-70. Under this CSO, the Air Force will be allowed to competitively procure innovativecommercial items, technologies, and services. CSO procedures provide a streamlined acquisition process and simplified contract terms resulting in FAR-based contracts awarded under Part 12 Commercial Item Procedures or awards made with Other Transactions (OTs) under 10 USC 4022. Both traditional and non-traditional defense contractors may be awarded contracts under this CSO. Under a CSO Air Force contracting officers may competitively select proposals received in response to a general competitive solicitation, similar to a broad agency announcement, based on a review of proposals by scientific, technological, or othersubject matter experts. | - | Combined Synopsis | 08/29/2030 |
This Commercial Solutions Opening (CSO), as contemplated in 10 U.S.C. 3458 and DFARS Subpart 212.70 – Defense Commercial Solutions Opening, is a competitive solicitation of proposals focused on technologies to meet the Air Force Technical Application Center's (AFTAC) mission. AFTAC is looking for new capabilities in nuclear treaty monitoring, advanced detection technologies to support the counter-proliferation of weapons of mass destruction and other applied technologies. AFTAC seeks the best approaches to meet the technology objectives within the capability areas listed below. Detailed topics associated with each capability area appear in Attachment 6. TOPIC: AFTAC-001, GEOPHYSICS AND SEISMOLOGY AFTAC-002, ATMOSPHERE AND SPACE AFTAC-003, DIRECTED ENEGRY WEAPON (DEW) AFTAC-004, NUCLEAR AND NUCLEAR-RELATED MATERIALS ANALYSIS AFTAC-005, MATERIALS MODELING AND ANALYSIS AFTAC-006, ENTERPRISE WIDE INTEGRATION AND ARCHITECTURE MODERNIZATION AFTAC-007, ENTERPRISE ASSET AND LIFECYCLE MANAGEMENT IMPROVEMENTS AFTAC-008, HIGH PERFORMANCE AND SECURE CLOUD COMPUTING AND DEV OPS SOLUTIONS FOR DATA INGESTION, EXPLOITATION, AND DISSEMINATION This is a follow-on solicitation to AFTAC_CSO_2023 | - | Combined Synopsis | 04/24/2029 |
Additional Details
Solicitation Number
70FBR020Q00000001
Archive Date
Jun 2, 2020
Office Address
BOTHELL, WA, 98021